Commit 592d9e21 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] anysee: change some messages

Print firmware version as two digit long (change from 3 to 2).
Windows app have changed that too. First byte was hard coded as 0.

Change email list address to report non-working device to current one.
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent b3e6a5af
......@@ -261,8 +261,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
return ret;
/* Meaning of these info bytes are guessed. */
info("firmware version:%d.%d.%d hardware id:%d",
0, hw_info[1], hw_info[2], hw_info[0]);
info("firmware version:%d.%d hardware id:%d",
hw_info[1], hw_info[2], hw_info[0]);
ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
if (ret)
......@@ -272,14 +272,14 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
/* Select demod using trial and error method. */
/* Try to attach demodulator in following order:
model demod hw firmware
1. E30 MT352 02 0.2.1
2. E30 ZL10353 02 0.2.1
3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo
4. E30 Plus ZL10353 06 0.1.0
5. E30C Plus TDA10023 0a 0.1.0 rev 0.2
E30C Plus TDA10023 0f 0.1.2 rev 0.4
E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo
model demod hw fw
1. E30 MT352 02 2.1
2. E30 ZL10353 02 2.1
3. E30 Combo ZL10353 0f 1.2 DVB-T/C combo
4. E30 Plus ZL10353 06 1.0
5. E30C Plus TDA10023 0a 1.0 rev 0.2
E30C Plus TDA10023 0f 1.2 rev 0.4
E30 Combo TDA10023 0f 1.2 DVB-T/C combo
*/
/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
......@@ -344,8 +344,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
if (ret)
return ret;
err("Unknown Anysee version: %02x %02x %02x. "\
"Please report the <linux-dvb@linuxtv.org>.",
err("Unknown Anysee version: %02x %02x %02x. " \
"Please report the <linux-media@vger.kernel.org>.",
hw_info[0], hw_info[1], hw_info[2]);
return -ENODEV;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment