Merge tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "These were from over the holiday period, mainly i915, a couple of
  qaic, bridge and an mgag200.

  qaic:
   - fix GEM import
   - add quirk for soc version

  bridge:
   - parade-ps8640, ti-sn65dsi86: fix aux reads bounds

  mgag200:
   - fix gamma LUT init

  i915:
   - Fix bogus DPCD rev usage for DP phy test pattern setup
   - Fix handling of MMIO triggered reports in the OA buffer"

* tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/perf: Update handling of MMIO triggered reports
  drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern
  drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SE
  drm/bridge: ps8640: Fix size mismatch warning w/ len
  drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer
  drm/bridge: parade-ps8640: Never store more than msg->size bytes in AUX xfer
  accel/qaic: Implement quirk for SOC_HW_VERSION
  accel/qaic: Fix GEM import path code

drivers/accel/qaic/mhi_controller.c

@@ -404,8 +404,21 @@ static struct mhi_controller_config aic100_config = {
 
 static int mhi_read_reg(struct mhi_controller *mhi_cntrl, void __iomem *addr, u32 *out)
 {
-	u32 tmp = readl_relaxed(addr);
+	u32 tmp;
 
+	/*
+	 * SOC_HW_VERSION quirk
+	 * The SOC_HW_VERSION register (offset 0x224) is not reliable and
+	 * may contain uninitialized values, including 0xFFFFFFFF. This could
+	 * cause a false positive link down error.  Instead, intercept any
+	 * reads and provide the correct value of the register.
+	 */
+	if (addr - mhi_cntrl->regs == 0x224) {
+		*out = 0x60110200;
+		return 0;
+	}
+
+	tmp = readl_relaxed(addr);
 	if (tmp == U32_MAX)
 		return -EIO;
 

drivers/accel/qaic/qaic_data.c

@@ -777,7 +777,6 @@ struct drm_gem_object *qaic_gem_prime_import(struct drm_device *dev, struct dma_
 	struct dma_buf_attachment *attach;
 	struct drm_gem_object *obj;
 	struct qaic_bo *bo;
-	size_t size;
 	int ret;
 
 	bo = qaic_alloc_init_bo();
@@ -795,13 +794,12 @@ struct drm_gem_object *qaic_gem_prime_import(struct drm_device *dev, struct dma_
 		goto attach_fail;
 	}
 
-	size = PAGE_ALIGN(attach->dmabuf->size);
-	if (size == 0) {
+	if (!attach->dmabuf->size) {
 		ret = -EINVAL;
 		goto size_align_fail;
 	}
 
-	drm_gem_private_object_init(dev, obj, size);
+	drm_gem_private_object_init(dev, obj, attach->dmabuf->size);
 	/*
 	 * skipping dma_buf_map_attachment() as we do not know the direction
 	 * just yet. Once the direction is known in the subsequent IOCTL to

drivers/gpu/drm/bridge/parade-ps8640.c

@@ -210,7 +210,7 @@ static ssize_t ps8640_aux_transfer_msg(struct drm_dp_aux *aux,
 	struct ps8640 *ps_bridge = aux_to_ps8640(aux);
 	struct regmap *map = ps_bridge->regmap[PAGE0_DP_CNTL];
 	struct device *dev = &ps_bridge->page[PAGE0_DP_CNTL]->dev;
-	unsigned int len = msg->size;
+	size_t len = msg->size;
 	unsigned int data;
 	unsigned int base;
 	int ret;
@@ -330,11 +330,12 @@ static ssize_t ps8640_aux_transfer_msg(struct drm_dp_aux *aux,
 				return ret;
 			}
 
+			if (i < msg->size)
 				buf[i] = data;
 		}
 	}
 
-	return len;
+	return min(len, msg->size);
 }
 
 static ssize_t ps8640_aux_transfer(struct drm_dp_aux *aux,

drivers/gpu/drm/bridge/ti-sn65dsi86.c

@@ -527,6 +527,7 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
 	u32 request_val = AUX_CMD_REQ(msg->request);
 	u8 *buf = msg->buffer;
 	unsigned int len = msg->size;
+	unsigned int short_len;
 	unsigned int val;
 	int ret;
 	u8 addr_len[SN_AUX_LENGTH_REG + 1 - SN_AUX_ADDR_19_16_REG];
@@ -600,7 +601,8 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
 	}
 
 	if (val & AUX_IRQ_STATUS_AUX_SHORT) {
-		ret = regmap_read(pdata->regmap, SN_AUX_LENGTH_REG, &len);
+		ret = regmap_read(pdata->regmap, SN_AUX_LENGTH_REG, &short_len);
+		len = min(len, short_len);
 		if (ret)
 			goto exit;
 	} else if (val & AUX_IRQ_STATUS_NAT_I2C_FAIL) {

drivers/gpu/drm/i915/display/intel_dp.c

@@ -4496,7 +4496,7 @@ static void intel_dp_process_phy_request(struct intel_dp *intel_dp,
 			  intel_dp->train_set, crtc_state->lane_count);
 
 	drm_dp_set_phy_test_pattern(&intel_dp->aux, data,
-				    link_status[DP_DPCD_REV]);
+				    intel_dp->dpcd[DP_DPCD_REV]);
 }
 
 static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)

drivers/gpu/drm/i915/i915_perf.c

@@ -772,10 +772,6 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
 		 * The reason field includes flags identifying what
 		 * triggered this specific report (mostly timer
 		 * triggered or e.g. due to a context switch).
-		 *
-		 * In MMIO triggered reports, some platforms do not set the
-		 * reason bit in this field and it is valid to have a reason
-		 * field of zero.
 		 */
 		reason = oa_report_reason(stream, report);
 		ctx_id = oa_context_id(stream, report32);
@@ -787,8 +783,41 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
 		 *
 		 * Note: that we don't clear the valid_ctx_bit so userspace can
 		 * understand that the ID has been squashed by the kernel.
+		 *
+		 * Update:
+		 *
+		 * On XEHP platforms the behavior of context id valid bit has
+		 * changed compared to prior platforms. To describe this, we
+		 * define a few terms:
+		 *
+		 * context-switch-report: This is a report with the reason type
+		 * being context-switch. It is generated when a context switches
+		 * out.
+		 *
+		 * context-valid-bit: A bit that is set in the report ID field
+		 * to indicate that a valid context has been loaded.
+		 *
+		 * gpu-idle: A condition characterized by a
+		 * context-switch-report with context-valid-bit set to 0.
+		 *
+		 * On prior platforms, context-id-valid bit is set to 0 only
+		 * when GPU goes idle. In all other reports, it is set to 1.
+		 *
+		 * On XEHP platforms, context-valid-bit is set to 1 in a context
+		 * switch report if a new context switched in. For all other
+		 * reports it is set to 0.
+		 *
+		 * This change in behavior causes an issue with MMIO triggered
+		 * reports. MMIO triggered reports have the markers in the
+		 * context ID field and the context-valid-bit is 0. The logic
+		 * below to squash the context ID would render the report
+		 * useless since the user will not be able to find it in the OA
+		 * buffer. Since MMIO triggered reports exist only on XEHP,
+		 * we should avoid squashing these for XEHP platforms.
 		 */
-		if (oa_report_ctx_invalid(stream, report)) {
+
+		if (oa_report_ctx_invalid(stream, report) &&
+		    GRAPHICS_VER_FULL(stream->engine->i915) < IP_VER(12, 50)) {
 			ctx_id = INVALID_CTX_ID;
 			oa_context_id_squash(stream, report32);
 		}

drivers/gpu/drm/mgag200/mgag200_drv.h

@@ -392,6 +392,11 @@ void mgag200_primary_plane_helper_atomic_disable(struct drm_plane *plane,
 	.destroy = drm_plane_cleanup, \
 	DRM_GEM_SHADOW_PLANE_FUNCS
 
+void mgag200_crtc_set_gamma_linear(struct mga_device *mdev, const struct drm_format_info *format);
+void mgag200_crtc_set_gamma(struct mga_device *mdev,
+			    const struct drm_format_info *format,
+			    struct drm_color_lut *lut);
+
 enum drm_mode_status mgag200_crtc_helper_mode_valid(struct drm_crtc *crtc,
 						    const struct drm_display_mode *mode);
 int mgag200_crtc_helper_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *new_state);

drivers/gpu/drm/mgag200/mgag200_g200er.c

@@ -202,6 +202,11 @@ static void mgag200_g200er_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 
 	mgag200_g200er_reset_tagfifo(mdev);
 
+	if (crtc_state->gamma_lut)
+		mgag200_crtc_set_gamma(mdev, format, crtc_state->gamma_lut->data);
+	else
+		mgag200_crtc_set_gamma_linear(mdev, format);
+
 	mgag200_enable_display(mdev);
 
 	if (funcs->enable_vidrst)

drivers/gpu/drm/mgag200/mgag200_g200ev.c

@@ -203,6 +203,11 @@ static void mgag200_g200ev_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 
 	mgag200_g200ev_set_hiprilvl(mdev);
 
+	if (crtc_state->gamma_lut)
+		mgag200_crtc_set_gamma(mdev, format, crtc_state->gamma_lut->data);
+	else
+		mgag200_crtc_set_gamma_linear(mdev, format);
+
 	mgag200_enable_display(mdev);
 
 	if (funcs->enable_vidrst)

drivers/gpu/drm/mgag200/mgag200_g200se.c

@@ -334,6 +334,11 @@ static void mgag200_g200se_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 
 	mgag200_g200se_set_hiprilvl(mdev, adjusted_mode, format);
 
+	if (crtc_state->gamma_lut)
+		mgag200_crtc_set_gamma(mdev, format, crtc_state->gamma_lut->data);
+	else
+		mgag200_crtc_set_gamma_linear(mdev, format);
+
 	mgag200_enable_display(mdev);
 
 	if (funcs->enable_vidrst)

drivers/gpu/drm/mgag200/mgag200_mode.c

@@ -28,7 +28,7 @@
  * This file contains setup code for the CRTC.
  */
 
-static void mgag200_crtc_set_gamma_linear(struct mga_device *mdev,
+void mgag200_crtc_set_gamma_linear(struct mga_device *mdev,
 				   const struct drm_format_info *format)
 {
 	int i;
@@ -65,7 +65,7 @@ static void mgag200_crtc_set_gamma_linear(struct mga_device *mdev,
 	}
 }
 
-static void mgag200_crtc_set_gamma(struct mga_device *mdev,
+void mgag200_crtc_set_gamma(struct mga_device *mdev,
 			    const struct drm_format_info *format,
 			    struct drm_color_lut *lut)
 {