[media] media: rc: nuvoton: clean up initialization of wakeup registers

The registers defining wakeup sequence handling are set when the
wakeup sequence is set via sysfs. There's no need to initialize them
otherwise.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/rc/nuvoton-cir.c

@@ -564,34 +564,15 @@ static void nvt_cir_regs_init(struct nvt_dev *nvt)
 
 static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
 {
-	/* set number of bytes needed for wake from s3 (default 65) */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_CMP_BYTES,
-			       CIR_WAKE_FIFO_CMP_DEEP);
-
-	/* set tolerance/variance allowed per byte during wake compare */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
-			       CIR_WAKE_FIFO_CMP_TOL);
-
-	/* set sample limit count (PE interrupt raised when reached) */
-	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH);
-	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL);
-
-	/* set cir wake fifo rx trigger level (currently 67) */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV,
-			       CIR_WAKE_FIFOCON);
-
 	/*
-	 * Enable TX and RX, specific carrier on = low, off = high, and set
-	 * sample period (currently 50us)
+	 * Disable RX, set specific carrier on = low, off = high,
+	 * and sample period (currently 50us)
 	 */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 |
 			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
 			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
 			       CIR_WAKE_IRCON);
 
-	/* clear cir wake rx fifo */
-	nvt_clear_cir_wake_fifo(nvt);
-
 	/* clear any and all stray interrupts */
 	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);