Skip to content

L
linux
Commit 59bd7f62 authored by John Whitmore's avatar John Whitmore Committed by Greg Kroah-Hartman
Browse files
Options

staging: rtl8192e: Add spaces where required by coding standard 

There were numerous coding syle errors in this file where spaces were required
around operators.
Signed-off-by: default avatarJohn Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b145d786
Hide whitespace changes
Inline Side-by-side
Showing with 63 additions and 63 deletions
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
View file @ 59bd7f62
......@@ -60,8 +60,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p, offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
//printk("===>ieee:%p,\n", ieee);
// ShortGI support
pHTInfo->bRegShortGI20MHz= 1;
pHTInfo->bRegShortGI40MHz= 1;
pHTInfo->bRegShortGI20MHz = 1;
pHTInfo->bRegShortGI40MHz = 1;
// 40MHz channel support
pHTInfo->bRegBW40MHz = 1;
......@@ -138,12 +138,12 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz)?"YES": "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC)?"YES": "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize)?"3839": "7935");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk)?"YES": "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth) ? "20MHz" : "20/40MHz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize) ? "3839" : "7935");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMPDU Factor = %d\n", pCapELE->MaxRxAMPDUFactor);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
......@@ -193,7 +193,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
break;
}
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth) ? "20Mhz" : "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
switch (pHTInfoEle->OptMode)
......@@ -272,8 +272,8 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
u8 is40MHz;
u8 isShortGI;
is40MHz = (IsHTHalfNmode40Bandwidth(ieee))?1:0;
isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz))? 1:0;
is40MHz = (IsHTHalfNmode40Bandwidth(ieee)) ? 1 : 0;
isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz)) ? 1 : 0;
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
......@@ -283,10 +283,10 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
u8 is40MHz = (pHTInfo->bCurBW40MHz)?1:0;
u8 isShortGI = (pHTInfo->bCurBW40MHz)?
((pHTInfo->bCurShortGI40MHz)?1:0):
((pHTInfo->bCurShortGI20MHz)?1:0);
u8 is40MHz = (pHTInfo->bCurBW40MHz) ? 1 : 0;
u8 isShortGI = (pHTInfo->bCurBW40MHz) ?
((pHTInfo->bCurShortGI40MHz) ? 1 : 0) :
((pHTInfo->bCurShortGI20MHz) ? 1 : 0);
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
......@@ -318,7 +318,7 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
// nDataRate = nDataRate - 12;
}
else if (nDataRate >=0x20 && nDataRate <= 0x2f ) //(27, 44)
else if (nDataRate >= 0x20 && nDataRate <= 0x2f ) //(27, 44)
{
is40MHz = 1;
isShortGI = 0;
......@@ -349,17 +349,17 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
{
bool retValue = false;
struct ieee80211_network *net = &ieee->current_network;
if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
(memcmp(net->bssid, PCI_RALINK, 3)==0) ||
(memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
(memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
(memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
(memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
(memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
(net->ralink_cap_exist))
retValue = true;
else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) ||
(net->broadcom_cap_exist))
retValue = true;
else if (net->bssht.bdRT2RTAggregation)
......@@ -385,21 +385,21 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
else if (net->broadcom_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) )
else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) )
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
(memcmp(net->bssid, PCI_RALINK, 3)==0) ||
(memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
(memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
(memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
(memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
(memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
net->ralink_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
else if (net->atheros_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
else if (memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
else if (memcmp(net->bssid, CISCO_BROADCOM, 3) == 0)
pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
else
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
......@@ -438,7 +438,7 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
#ifdef TODO
// Apply for 819u only
#if (HAL_CODE_BASE==RTL8192)
#if (HAL_CODE_BASE == RTL8192)
#if (DEV_BUS_TYPE == USB_INTERFACE)
// Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
......@@ -515,9 +515,9 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
{
u8 retValue = 0;
if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
{
retValue = 1;
}
......@@ -575,7 +575,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
}
else
{
pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
pCapELE->ChlWidth = (pHT->bRegBW40MHz ? 1 : 0);
}
// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
......@@ -588,8 +588,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->TxSTBC = 1;
pCapELE->RxSTBC = 0;
pCapELE->DelayBA = 0; // Do not support now!!
pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
pCapELE->DssCCk = ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE >= 7935) ? 1 : 0;
pCapELE->DssCCk = ((pHT->bRegBW40MHz) ? (pHT->bRegSuppCCK ? 1 : 0) : 0);
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
......@@ -600,11 +600,11 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (IsEncrypt) {
pCapELE->MPDUDensity = 7; // 8us
pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
}
else
{
pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
pCapELE->MPDUDensity = 0; // no density
}
......@@ -624,7 +624,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
{
int i;
for (i = 1; i< 16; i++)
for (i = 1; i < 16; i++)
pCapELE->MCS[i] = 0;
}
......@@ -676,9 +676,9 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
{
pHTInfoEle->ControlChl = ieee->current_network.channel;
pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
(ieee->current_network.channel<=6)?
HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
(ieee->current_network.channel <= 6) ?
HT_EXTCHNL_OFFSET_UPPER : HT_EXTCHNL_OFFSET_LOWER);
pHTInfoEle->RecommemdedTxWidth = pHT->bRegBW40MHz;
pHTInfoEle->RIFS = 0;
pHTInfoEle->PSMPAccessOnly = 0;
......@@ -805,7 +805,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//legacy rate routine handled at selectedrate
//no MCS rate
for (i=0;i<=15;i++){
for (i = 0; i <= 15; i++){
pOperateMCS[i] = 0;
}
break;
......@@ -817,9 +817,9 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//HT part
// TODO: may be different if we have different number of antenna
pOperateMCS[0] &=RATE_ADPT_1SS_MASK; //support MCS 0~7
pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
break;
//should never reach here
......@@ -862,7 +862,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
}
for (i=0; i<16; i++)
for (i = 0; i < 16; i++)
availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
for (i = 0; i < 16; i++)
......@@ -907,10 +907,10 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
u8 i=0;
u8 i = 0;
// filter out operational rate set not supported by AP, the length of it is 16
for (i=0;i<=15;i++){
for (i = 0; i <= 15; i++){
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
}
......@@ -929,7 +929,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// For RTL819X, we support only MCS0~15.
// And also, we do not know how to use MCS32 now.
//
for (i=2; i<=15; i++)
for (i = 2; i <= 15; i++)
pOperateMCS[i] = 0;
return true;
......@@ -1006,7 +1006,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
//
pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize==0)?3839:7935;
nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
if (pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize )
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
......@@ -1196,7 +1196,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
memset(pBssHT->bdHTInfoBuf, 0, sizeof(pBssHT->bdHTInfoBuf));
pBssHT->bdHTInfoLen = 0;
pBssHT->bdHTSpecVer= HT_SPEC_VER_IEEE;
pBssHT->bdHTSpecVer = HT_SPEC_VER_IEEE;
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
......@@ -1357,12 +1357,12 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
return;
}
//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
if (Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
if (Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
{
// Handle Illegal extension channel offset!!
if (ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
if (ieee->current_network.channel < 2 && Offset == HT_EXTCHNL_OFFSET_LOWER)
Offset = HT_EXTCHNL_OFFSET_NO_EXT;
if (Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
if (Offset == HT_EXTCHNL_OFFSET_UPPER || Offset == HT_EXTCHNL_OFFSET_LOWER) {
pHTInfo->bCurBW40MHz = true;
pHTInfo->CurSTAExtChnlOffset = Offset;
} else {
......@@ -1393,9 +1393,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee)
if (pHTInfo->bCurBW40MHz)
{
if (pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_UPPER)
if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_UPPER)
ieee->set_chan(ieee->dev, ieee->current_network.channel+2);
else if (pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_LOWER)
else if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_LOWER)
ieee->set_chan(ieee->dev, ieee->current_network.channel-2);
else
ieee->set_chan(ieee->dev, ieee->current_network.channel);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7