Commit 5a35b85c authored by Joseph Chen's avatar Joseph Chen Committed by Dmitry Torokhov

Input: add power key driver for Rockchip RK805 PMIC

This driver provides a input driver for the power key on the Rockchip RK805
PMIC.
Signed-off-by: default avatarJoseph Chen <chenjh@rock-chips.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 53a7ff8f
...@@ -581,6 +581,17 @@ config INPUT_PWM_BEEPER ...@@ -581,6 +581,17 @@ config INPUT_PWM_BEEPER
To compile this driver as a module, choose M here: the module will be To compile this driver as a module, choose M here: the module will be
called pwm-beeper. called pwm-beeper.
config INPUT_RK805_PWRKEY
tristate "Rockchip RK805 PMIC power key support"
depends on MFD_RK808
help
Select this option to enable power key driver for RK805.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called rk805_pwrkey.
config INPUT_GPIO_ROTARY_ENCODER config INPUT_GPIO_ROTARY_ENCODER
tristate "Rotary encoders connected to GPIO pins" tristate "Rotary encoders connected to GPIO pins"
depends on GPIOLIB || COMPILE_TEST depends on GPIOLIB || COMPILE_TEST
......
...@@ -64,6 +64,7 @@ obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o ...@@ -64,6 +64,7 @@ obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
......
/*
* Rockchip RK805 PMIC Power Key driver
*
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Joseph Chen <chenjh@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
static irqreturn_t pwrkey_fall_irq(int irq, void *_pwr)
{
struct input_dev *pwr = _pwr;
input_report_key(pwr, KEY_POWER, 1);
input_sync(pwr);
return IRQ_HANDLED;
}
static irqreturn_t pwrkey_rise_irq(int irq, void *_pwr)
{
struct input_dev *pwr = _pwr;
input_report_key(pwr, KEY_POWER, 0);
input_sync(pwr);
return IRQ_HANDLED;
}
static int rk805_pwrkey_probe(struct platform_device *pdev)
{
struct input_dev *pwr;
int fall_irq, rise_irq;
int err;
pwr = devm_input_allocate_device(&pdev->dev);
if (!pwr) {
dev_err(&pdev->dev, "Can't allocate power button\n");
return -ENOMEM;
}
pwr->name = "rk805 pwrkey";
pwr->phys = "rk805_pwrkey/input0";
pwr->id.bustype = BUS_HOST;
input_set_capability(pwr, EV_KEY, KEY_POWER);
fall_irq = platform_get_irq(pdev, 0);
if (fall_irq < 0) {
dev_err(&pdev->dev, "Can't get fall irq: %d\n", fall_irq);
return fall_irq;
}
rise_irq = platform_get_irq(pdev, 1);
if (rise_irq < 0) {
dev_err(&pdev->dev, "Can't get rise irq: %d\n", rise_irq);
return rise_irq;
}
err = devm_request_any_context_irq(&pwr->dev, fall_irq,
pwrkey_fall_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"rk805_pwrkey_fall", pwr);
if (err < 0) {
dev_err(&pdev->dev, "Can't register fall irq: %d\n", err);
return err;
}
err = devm_request_any_context_irq(&pwr->dev, rise_irq,
pwrkey_rise_irq,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
"rk805_pwrkey_rise", pwr);
if (err < 0) {
dev_err(&pdev->dev, "Can't register rise irq: %d\n", err);
return err;
}
err = input_register_device(pwr);
if (err) {
dev_err(&pdev->dev, "Can't register power button: %d\n", err);
return err;
}
platform_set_drvdata(pdev, pwr);
device_init_wakeup(&pdev->dev, true);
return 0;
}
static struct platform_driver rk805_pwrkey_driver = {
.probe = rk805_pwrkey_probe,
.driver = {
.name = "rk805-pwrkey",
},
};
module_platform_driver(rk805_pwrkey_driver);
MODULE_AUTHOR("Joseph Chen <chenjh@rock-chips.com>");
MODULE_DESCRIPTION("RK805 PMIC Power Key driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment