Commit 5a412ad7 authored by David S. Miller's avatar David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6

parents 301102cc 6716344c
......@@ -1512,7 +1512,7 @@ static int e100_phy_init(struct nic *nic)
static int e100_hw_init(struct nic *nic)
{
int err;
int err = 0;
e100_hw_reset(nic);
......
......@@ -244,6 +244,14 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
/*
* Check for invalid size
*/
if ((hw->mac.type == e1000_82576) && (size > 15)) {
printk("igb: The NVM size is not valid, "
"defaulting to 32K.\n");
size = 15;
}
nvm->word_size = 1 << size;
if (nvm->word_size == (1 << 15))
nvm->page_size = 128;
......
......@@ -391,11 +391,6 @@ static int igbvf_set_wol(struct net_device *netdev,
return -EOPNOTSUPP;
}
static int igbvf_phys_id(struct net_device *netdev, u32 data)
{
return 0;
}
static int igbvf_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
......@@ -527,7 +522,6 @@ static const struct ethtool_ops igbvf_ethtool_ops = {
.self_test = igbvf_diag_test,
.get_sset_count = igbvf_get_sset_count,
.get_strings = igbvf_get_strings,
.phys_id = igbvf_phys_id,
.get_ethtool_stats = igbvf_get_ethtool_stats,
.get_coalesce = igbvf_get_coalesce,
.set_coalesce = igbvf_set_coalesce,
......
......@@ -157,9 +157,6 @@ struct ixgb_adapter {
u16 link_duplex;
struct work_struct tx_timeout_task;
struct timer_list blink_timer;
unsigned long led_status;
/* TX */
struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
unsigned int restart_queue;
......
......@@ -611,45 +611,23 @@ ixgb_set_ringparam(struct net_device *netdev,
return err;
}
/* toggle LED 4 times per second = 2 "blinks" per second */
#define IXGB_ID_INTERVAL (HZ/4)
/* bit defines for adapter->led_status */
#define IXGB_LED_ON 0
static void
ixgb_led_blink_callback(unsigned long data)
{
struct ixgb_adapter *adapter = (struct ixgb_adapter *)data;
if (test_and_change_bit(IXGB_LED_ON, &adapter->led_status))
ixgb_led_off(&adapter->hw);
else
ixgb_led_on(&adapter->hw);
mod_timer(&adapter->blink_timer, jiffies + IXGB_ID_INTERVAL);
}
static int
ixgb_phys_id(struct net_device *netdev, u32 data)
ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
if (!data)
data = INT_MAX;
if (!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer);
adapter->blink_timer.function = ixgb_led_blink_callback;
adapter->blink_timer.data = (unsigned long)adapter;
}
switch (state) {
case ETHTOOL_ID_ACTIVE:
return 2;
mod_timer(&adapter->blink_timer, jiffies);
case ETHTOOL_ID_ON:
ixgb_led_on(&adapter->hw);
break;
msleep_interruptible(data * 1000);
del_timer_sync(&adapter->blink_timer);
ixgb_led_off(&adapter->hw);
clear_bit(IXGB_LED_ON, &adapter->led_status);
case ETHTOOL_ID_OFF:
case ETHTOOL_ID_INACTIVE:
ixgb_led_off(&adapter->hw);
}
return 0;
}
......@@ -767,7 +745,7 @@ static const struct ethtool_ops ixgb_ethtool_ops = {
.set_msglevel = ixgb_set_msglevel,
.set_tso = ixgb_set_tso,
.get_strings = ixgb_get_strings,
.phys_id = ixgb_phys_id,
.set_phys_id = ixgb_set_phys_id,
.get_sset_count = ixgb_get_sset_count,
.get_ethtool_stats = ixgb_get_ethtool_stats,
.get_flags = ethtool_op_get_flags,
......
......@@ -1281,6 +1281,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
.init_params = &ixgbe_init_eeprom_params_generic,
.read = &ixgbe_read_eerd_generic,
.read_buffer = &ixgbe_read_eerd_buffer_generic,
.calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
......
......@@ -110,7 +110,6 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
&data_offset);
if (ret_val != 0)
goto setup_sfp_out;
......@@ -130,7 +129,7 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
}
/* Release the semaphore */
ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
/*
* Delay obtaining semaphore again to allow FW access,
* semaphore_delay is in ms usleep_range needs us.
......@@ -2064,6 +2063,39 @@ static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
return lesm_enabled;
}
/**
* ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
* fastest available method
*
* @hw: pointer to hardware structure
* @offset: offset of word in EEPROM to read
* @words: number of words
* @data: word(s) read from the EEPROM
*
* Retrieves 16 bit word(s) read from EEPROM
**/
static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
s32 ret_val = IXGBE_ERR_CONFIG;
/*
* If EEPROM is detected and can be addressed using 14 bits,
* use EERD otherwise use bit bang
*/
if ((eeprom->type == ixgbe_eeprom_spi) &&
(offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
data);
else
ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
words,
data);
return ret_val;
}
/**
* ixgbe_read_eeprom_82599 - Read EEPROM word using
* fastest available method
......@@ -2140,7 +2172,9 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
.init_params = &ixgbe_init_eeprom_params_generic,
.read = &ixgbe_read_eeprom_82599,
.read_buffer = &ixgbe_read_eeprom_buffer_82599,
.write = &ixgbe_write_eeprom_generic,
.write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic,
.calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
......
......@@ -55,6 +55,12 @@ static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
u16 offset);
/**
* ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
......@@ -585,6 +591,8 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
/* Set default semaphore delay to 10ms which is a well
* tested value */
eeprom->semaphore_delay = 10;
/* Clear EEPROM page size, it will be initialized as needed */
eeprom->word_page_size = 0;
/*
* Check for EEPROM present first.
......@@ -617,26 +625,78 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
}
/**
* ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
* ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be written to
* @data: 16 bit word to be written to the EEPROM
* @offset: offset within the EEPROM to write
* @words: number of words
* @data: 16 bit word(s) to write to EEPROM
*
* If ixgbe_eeprom_update_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
* Reads 16 bit word(s) from EEPROM through bit-bang method
**/
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
s32 status;
u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
s32 status = 0;
u16 i, count;
hw->eeprom.ops.init_params(hw);
if (offset >= hw->eeprom.word_size) {
if (words == 0) {
status = IXGBE_ERR_INVALID_ARGUMENT;
goto out;
}
if (offset + words > hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
/*
* The EEPROM page size cannot be queried from the chip. We do lazy
* initialization. It is worth to do that when we write large buffer.
*/
if ((hw->eeprom.word_page_size == 0) &&
(words > IXGBE_EEPROM_PAGE_SIZE_MAX))
ixgbe_detect_eeprom_page_size_generic(hw, offset);
/*
* We cannot hold synchronization semaphores for too long
* to avoid other entity starvation. However it is more efficient
* to read in bursts than synchronizing access for each word.
*/
for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
count, &data[i]);
if (status != 0)
break;
}
out:
return status;
}
/**
* ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be written to
* @words: number of word(s)
* @data: 16 bit word(s) to be written to the EEPROM
*
* If ixgbe_eeprom_update_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
**/
static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
s32 status;
u16 word;
u16 page_size;
u16 i;
u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
/* Prepare the EEPROM for writing */
status = ixgbe_acquire_eeprom(hw);
......@@ -648,62 +708,147 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
}
if (status == 0) {
ixgbe_standby_eeprom(hw);
for (i = 0; i < words; i++) {
ixgbe_standby_eeprom(hw);
/* Send the WRITE ENABLE command (8 bit opcode ) */
ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI,
IXGBE_EEPROM_OPCODE_BITS);
/* Send the WRITE ENABLE command (8 bit opcode ) */
ixgbe_shift_out_eeprom_bits(hw,
IXGBE_EEPROM_WREN_OPCODE_SPI,
IXGBE_EEPROM_OPCODE_BITS);
ixgbe_standby_eeprom(hw);
ixgbe_standby_eeprom(hw);
/*
* Some SPI eeproms use the 8th address bit embedded in the
* opcode
*/
if ((hw->eeprom.address_bits == 8) && (offset >= 128))
write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
/*
* Some SPI eeproms use the 8th address bit embedded
* in the opcode
*/
if ((hw->eeprom.address_bits == 8) &&
((offset + i) >= 128))
write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
/* Send the Write command (8-bit opcode + addr) */
ixgbe_shift_out_eeprom_bits(hw, write_opcode,
IXGBE_EEPROM_OPCODE_BITS);
ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
hw->eeprom.address_bits);
page_size = hw->eeprom.word_page_size;
/* Send the data in burst via SPI*/
do {
word = data[i];
word = (word >> 8) | (word << 8);
ixgbe_shift_out_eeprom_bits(hw, word, 16);
if (page_size == 0)
break;
/* do not wrap around page */
if (((offset + i) & (page_size - 1)) ==
(page_size - 1))
break;
} while (++i < words);
ixgbe_standby_eeprom(hw);
usleep_range(10000, 20000);
}
/* Done with writing - release the EEPROM */
ixgbe_release_eeprom(hw);
}
/* Send the Write command (8-bit opcode + addr) */
ixgbe_shift_out_eeprom_bits(hw, write_opcode,
IXGBE_EEPROM_OPCODE_BITS);
ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
hw->eeprom.address_bits);
return status;
}
/* Send the data */
data = (data >> 8) | (data << 8);
ixgbe_shift_out_eeprom_bits(hw, data, 16);
ixgbe_standby_eeprom(hw);
/**
* ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be written to
* @data: 16 bit word to be written to the EEPROM
*
* If ixgbe_eeprom_update_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
**/
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
{
s32 status;
/* Done with writing - release the EEPROM */
ixgbe_release_eeprom(hw);
hw->eeprom.ops.init_params(hw);
if (offset >= hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
out:
return status;
}
/**
* ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
* ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be read
* @data: read 16 bit value from EEPROM
* @words: number of word(s)
* @data: read 16 bit words(s) from EEPROM
*
* Reads 16 bit value from EEPROM through bit-bang method
* Reads 16 bit word(s) from EEPROM through bit-bang method
**/
s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 *data)
s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
s32 status;
u16 word_in;
u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
s32 status = 0;
u16 i, count;
hw->eeprom.ops.init_params(hw);
if (offset >= hw->eeprom.word_size) {
if (words == 0) {
status = IXGBE_ERR_INVALID_ARGUMENT;
goto out;
}
if (offset + words > hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
/*
* We cannot hold synchronization semaphores for too long
* to avoid other entity starvation. However it is more efficient
* to read in bursts than synchronizing access for each word.
*/
for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
count, &data[i]);
if (status != 0)
break;
}
out:
return status;
}
/**
* ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be read
* @words: number of word(s)
* @data: read 16 bit word(s) from EEPROM
*
* Reads 16 bit word(s) from EEPROM through bit-bang method
**/
static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
s32 status;
u16 word_in;
u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
u16 i;
/* Prepare the EEPROM for reading */
status = ixgbe_acquire_eeprom(hw);
......@@ -715,110 +860,227 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
}
if (status == 0) {
ixgbe_standby_eeprom(hw);
for (i = 0; i < words; i++) {
ixgbe_standby_eeprom(hw);
/*
* Some SPI eeproms use the 8th address bit embedded
* in the opcode
*/
if ((hw->eeprom.address_bits == 8) &&
((offset + i) >= 128))
read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
/* Send the READ command (opcode + addr) */
ixgbe_shift_out_eeprom_bits(hw, read_opcode,
IXGBE_EEPROM_OPCODE_BITS);
ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
hw->eeprom.address_bits);
/* Read the data. */
word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
data[i] = (word_in >> 8) | (word_in << 8);
}
/*
* Some SPI eeproms use the 8th address bit embedded in the
* opcode
*/
if ((hw->eeprom.address_bits == 8) && (offset >= 128))
read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
/* End this read operation */
ixgbe_release_eeprom(hw);
}
/* Send the READ command (opcode + addr) */
ixgbe_shift_out_eeprom_bits(hw, read_opcode,
IXGBE_EEPROM_OPCODE_BITS);
ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
hw->eeprom.address_bits);
return status;
}
/* Read the data. */
word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
*data = (word_in >> 8) | (word_in << 8);
/**
* ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be read
* @data: read 16 bit value from EEPROM
*
* Reads 16 bit value from EEPROM through bit-bang method
**/
s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 *data)
{
s32 status;
/* End this read operation */
ixgbe_release_eeprom(hw);
hw->eeprom.ops.init_params(hw);
if (offset >= hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
out:
return status;
}
/**
* ixgbe_read_eerd_generic - Read EEPROM word using EERD
* ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EEPROM
* @offset: offset of word in the EEPROM to read
* @words: number of word(s)
* @data: 16 bit word(s) from the EEPROM
*
* Reads a 16 bit word from the EEPROM using the EERD register.
* Reads a 16 bit word(s) from the EEPROM using the EERD register.
**/
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
u32 eerd;
s32 status;
s32 status = 0;
u32 i;
hw->eeprom.ops.init_params(hw);
if (words == 0) {
status = IXGBE_ERR_INVALID_ARGUMENT;
goto out;
}
if (offset >= hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) +
IXGBE_EEPROM_RW_REG_START;
for (i = 0; i < words; i++) {
eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
IXGBE_EEPROM_RW_REG_START;
IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
if (status == 0)
*data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
IXGBE_EEPROM_RW_REG_DATA);
else
hw_dbg(hw, "Eeprom read timed out\n");
if (status == 0) {
data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
IXGBE_EEPROM_RW_REG_DATA);
} else {
hw_dbg(hw, "Eeprom read timed out\n");
goto out;
}
}
out:
return status;
}
/**
* ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
* @hw: pointer to hardware structure
* @offset: offset within the EEPROM to be used as a scratch pad
*
* Discover EEPROM page size by writing marching data at given offset.
* This function is called only when we are writing a new large buffer
* at given offset so the data would be overwritten anyway.
**/
static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
u16 offset)
{
u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
s32 status = 0;
u16 i;
for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
data[i] = i;
hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
IXGBE_EEPROM_PAGE_SIZE_MAX, data);
hw->eeprom.word_page_size = 0;
if (status != 0)
goto out;
status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
if (status != 0)
goto out;
/*
* When writing in burst more than the actual page size
* EEPROM address wraps around current page.
*/
hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
hw_dbg(hw, "Detected EEPROM page size = %d words.",
hw->eeprom.word_page_size);
out:
return status;
}
/**
* ixgbe_write_eewr_generic - Write EEPROM word using EEWR
* ixgbe_read_eerd_generic - Read EEPROM word using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EEPROM
*
* Reads a 16 bit word from the EEPROM using the EERD register.
**/
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
}
/**
* ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to write
* @data: word write to the EEPROM
* @words: number of words
* @data: word(s) write to the EEPROM
*
* Write a 16 bit word to the EEPROM using the EEWR register.
* Write a 16 bit word(s) to the EEPROM using the EEWR register.
**/
s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data)
{
u32 eewr;
s32 status;
s32 status = 0;
u16 i;
hw->eeprom.ops.init_params(hw);
if (words == 0) {
status = IXGBE_ERR_INVALID_ARGUMENT;
goto out;
}
if (offset >= hw->eeprom.word_size) {
status = IXGBE_ERR_EEPROM;
goto out;
}
eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) |
(data << IXGBE_EEPROM_RW_REG_DATA) | IXGBE_EEPROM_RW_REG_START;
for (i = 0; i < words; i++) {
eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
(data[i] << IXGBE_EEPROM_RW_REG_DATA) |
IXGBE_EEPROM_RW_REG_START;
status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
if (status != 0) {
hw_dbg(hw, "Eeprom write EEWR timed out\n");
goto out;
}
status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
if (status != 0) {
hw_dbg(hw, "Eeprom write EEWR timed out\n");
goto out;
}
IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
if (status != 0) {
hw_dbg(hw, "Eeprom write EEWR timed out\n");
goto out;
status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
if (status != 0) {
hw_dbg(hw, "Eeprom write EEWR timed out\n");
goto out;
}
}
out:
return status;
}
/**
* ixgbe_write_eewr_generic - Write EEPROM word using EEWR
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to write
* @data: word write to the EEPROM
*
* Write a 16 bit word to the EEPROM using the EEWR register.
**/
s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
{
return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
}
/**
* ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
* @hw: pointer to hardware structure
......
......@@ -49,10 +49,18 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 *data);
s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
u16 words, u16 *data);
u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
u16 *checksum_val);
......
......@@ -847,11 +847,8 @@ static int ixgbe_get_eeprom(struct net_device *netdev,
if (!eeprom_buff)
return -ENOMEM;
for (i = 0; i < eeprom_len; i++) {
if ((ret_val = hw->eeprom.ops.read(hw, first_word + i,
&eeprom_buff[i])))
break;
}
ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len,
eeprom_buff);
/* Device's eeprom is always little-endian, word addressable */
for (i = 0; i < eeprom_len; i++)
......@@ -1236,46 +1233,62 @@ static const struct ixgbe_reg_test reg_test_82598[] = {
{ 0, 0, 0, 0 }
};
static const u32 register_test_patterns[] = {
0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
};
#define REG_PATTERN_TEST(R, M, W) \
{ \
u32 pat, val, before; \
for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
before = readl(adapter->hw.hw_addr + R); \
writel((register_test_patterns[pat] & W), \
(adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if (val != (register_test_patterns[pat] & W & M)) { \
e_err(drv, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
R, val, (register_test_patterns[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
return 1; \
} \
writel(before, adapter->hw.hw_addr + R); \
} \
static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg,
u32 mask, u32 write)
{
u32 pat, val, before;
static const u32 test_pattern[] = {
0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
before = readl(adapter->hw.hw_addr + reg);
writel((test_pattern[pat] & write),
(adapter->hw.hw_addr + reg));
val = readl(adapter->hw.hw_addr + reg);
if (val != (test_pattern[pat] & write & mask)) {
e_err(drv, "pattern test reg %04X failed: got "
"0x%08X expected 0x%08X\n",
reg, val, (test_pattern[pat] & write & mask));
*data = reg;
writel(before, adapter->hw.hw_addr + reg);
return 1;
}
writel(before, adapter->hw.hw_addr + reg);
}
return 0;
}
#define REG_SET_AND_CHECK(R, M, W) \
{ \
u32 val, before; \
before = readl(adapter->hw.hw_addr + R); \
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
e_err(drv, "set/check reg %04X test failed: got 0x%08X " \
"expected 0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \
} \
writel(before, (adapter->hw.hw_addr + R)); \
static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg,
u32 mask, u32 write)
{
u32 val, before;
before = readl(adapter->hw.hw_addr + reg);
writel((write & mask), (adapter->hw.hw_addr + reg));
val = readl(adapter->hw.hw_addr + reg);
if ((write & mask) != (val & mask)) {
e_err(drv, "set/check reg %04X test failed: got 0x%08X "
"expected 0x%08X\n", reg, (val & mask), (write & mask));
*data = reg;
writel(before, (adapter->hw.hw_addr + reg));
return 1;
}
writel(before, (adapter->hw.hw_addr + reg));
return 0;
}
#define REG_PATTERN_TEST(reg, mask, write) \
do { \
if (reg_pattern_test(adapter, data, reg, mask, write)) \
return 1; \
} while (0) \
#define REG_SET_AND_CHECK(reg, mask, write) \
do { \
if (reg_set_and_check(adapter, data, reg, mask, write)) \
return 1; \
} while (0) \
static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
{
const struct ixgbe_reg_test *test;
......@@ -1326,13 +1339,13 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
switch (test->test_type) {
case PATTERN_TEST:
REG_PATTERN_TEST(test->reg + (i * 0x40),
test->mask,
test->write);
test->mask,
test->write);
break;
case SET_READ_TEST:
REG_SET_AND_CHECK(test->reg + (i * 0x40),
test->mask,
test->write);
test->mask,
test->write);
break;
case WRITE_NO_TEST:
writel(test->write,
......@@ -1341,18 +1354,18 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
break;
case TABLE32_TEST:
REG_PATTERN_TEST(test->reg + (i * 4),
test->mask,
test->write);
test->mask,
test->write);
break;
case TABLE64_TEST_LO:
REG_PATTERN_TEST(test->reg + (i * 8),
test->mask,
test->write);
test->mask,
test->write);
break;
case TABLE64_TEST_HI:
REG_PATTERN_TEST((test->reg + 4) + (i * 8),
test->mask,
test->write);
test->mask,
test->write);
break;
}
}
......
......@@ -3862,9 +3862,10 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
gpie |= IXGBE_SDP1_GPIEN;
if (hw->mac.type == ixgbe_mac_82599EB)
if (hw->mac.type == ixgbe_mac_82599EB) {
gpie |= IXGBE_SDP1_GPIEN;
gpie |= IXGBE_SDP2_GPIEN;
}
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
}
......@@ -7468,8 +7469,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
/* print bus type/speed/width info */
e_dev_info("(PCI Express:%s:%s) %pM\n",
(hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0Gb/s" :
hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5Gb/s" :
(hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
"Unknown"),
(hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" :
......
......@@ -1222,7 +1222,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
swfw_mask = IXGBE_GSSR_PHY0_SM;
do {
if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
status = IXGBE_ERR_SWFW_SYNC;
goto read_byte_out;
}
......@@ -1269,7 +1269,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
break;
fail:
ixgbe_release_swfw_sync(hw, swfw_mask);
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
msleep(100);
ixgbe_i2c_bus_clear(hw);
retry++;
......@@ -1280,7 +1280,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
} while (retry < max_retry);
ixgbe_release_swfw_sync(hw, swfw_mask);
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
read_byte_out:
return status;
......@@ -1308,7 +1308,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
else
swfw_mask = IXGBE_GSSR_PHY0_SM;
if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
status = IXGBE_ERR_SWFW_SYNC;
goto write_byte_out;
}
......@@ -1352,7 +1352,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
hw_dbg(hw, "I2C byte write error.\n");
} while (retry < max_retry);
ixgbe_release_swfw_sync(hw, swfw_mask);
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
write_byte_out:
return status;
......
......@@ -1668,6 +1668,10 @@
#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
#endif
......@@ -2563,7 +2567,9 @@ typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
struct ixgbe_eeprom_operations {
s32 (*init_params)(struct ixgbe_hw *);
s32 (*read)(struct ixgbe_hw *, u16, u16 *);
s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
s32 (*write)(struct ixgbe_hw *, u16, u16);
s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
s32 (*update_checksum)(struct ixgbe_hw *);
u16 (*calc_checksum)(struct ixgbe_hw *);
......@@ -2649,6 +2655,7 @@ struct ixgbe_eeprom_info {
u32 semaphore_delay;
u16 word_size;
u16 address_bits;
u16 word_page_size;
};
#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01
......
......@@ -304,21 +304,49 @@ static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
}
/**
* ixgbe_read_eerd_X540 - Read EEPROM word using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EERPOM
* ixgbe_read_eerd_X540- Read EEPROM word using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EEPROM
*
* Reads a 16 bit word from the EEPROM using the EERD register.
**/
static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
s32 status;
s32 status = 0;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
0)
status = ixgbe_read_eerd_generic(hw, offset, data);
else
status = IXGBE_ERR_SWFW_SYNC;
ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @words: number of words
* @data: word(s) read from the EEPROM
*
* Reads a 16 bit word(s) from the EEPROM using the EERD register.
**/
static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
{
s32 status = 0;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
0)
status = ixgbe_read_eerd_buffer_generic(hw, offset,
words, data);
else
status = IXGBE_ERR_SWFW_SYNC;
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
......@@ -343,6 +371,31 @@ static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
return status;
}
/**
* ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to write
* @words: number of words
* @data: word(s) write to the EEPROM
*
* Write a 16 bit word(s) to the EEPROM using the EEWR register.
**/
static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
u16 offset, u16 words, u16 *data)
{
s32 status = 0;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
0)
status = ixgbe_write_eewr_buffer_generic(hw, offset,
words, data);
else
status = IXGBE_ERR_SWFW_SYNC;
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
return status;
}
/**
* ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
*
......@@ -851,7 +904,9 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
.init_params = &ixgbe_init_eeprom_params_X540,
.read = &ixgbe_read_eerd_X540,
.read_buffer = &ixgbe_read_eerd_buffer_X540,
.write = &ixgbe_write_eewr_X540,
.write_buffer = &ixgbe_write_eewr_buffer_X540,
.calc_checksum = &ixgbe_calc_eeprom_checksum_X540,
.validate_checksum = &ixgbe_validate_eeprom_checksum_X540,
.update_checksum = &ixgbe_update_eeprom_checksum_X540,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment