Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This has been sitting in -next for a while with no objections and all
  MIPS defconfigs except one are building fine; that one platform got
  broken by another patch in your tree and I'm going to submit a patch
  separately.

   - a handful of fixes that didn't make 3.11
   - a few bits of Octeon 3 support with more to come for a later
     release
   - platform enhancements for Octeon, ath79, Lantiq, Netlogic and
     Ralink SOCs
   - a GPIO driver for the Octeon
   - some dusting off of the DECstation code
   - the usual dose of cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits)
  MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code
  MIPS: kexec: Fix random crashes while loading crashkernel
  MIPS: kdump: Skip walking indirection page for crashkernels
  MIPS: DECstation HRT calibration bug fixes
  MIPS: Export copy_from_user_page() (needed by lustre)
  MIPS: Add driver for the built-in PCI controller of the RT3883 SoC
  MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
  MIPS: ralink: Add support for reset-controller API
  MIPS: ralink: mt7620: Add cpu-feature-override header
  MIPS: ralink: mt7620: Add spi clock definition
  MIPS: ralink: mt7620: Add wdt clock definition
  MIPS: ralink: mt7620: Improve clock frequency detection
  MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts
  MIPS: ralink: mt7620: Add verbose ram info
  MIPS: ralink: Probe clocksources from OF
  MIPS: ralink: Add support for systick timer found on newer ralink SoC
  MIPS: ralink: Add support for periodic timer irq
  MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards
  MIPS: Netlogic: Add support for USB on XLP2xx
  MIPS: Netlogic: XLP2xx update for I2C controller
  ...

Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt

+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+   Required properties:
+
+   - compatible: must be "ralink,rt3883-pci"
+
+   - reg: specifies the physical base address of the controller and
+     the length of the memory mapped region.
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 1.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 1.
+
+   - ranges: specifies the translation between child address space and parent
+     address space
+
+  Optional properties:
+
+   - status: indicates the operational status of the device.
+     Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+   The main node must have two child nodes which describes the built-in
+   interrupt controller and the PCI host bridge.
+
+   a) Interrupt controller:
+
+   Required properties:
+
+   - interrupt-controller: identifies the node as an interrupt controller
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0. As such, 'interrupt-map' nodes do not
+     have to specify a parent unit address.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - interrupt-parent: the phandle for the interrupt controller that
+     services interrupts for this device.
+
+   - interrupts: specifies the interrupt source of the parent interrupt
+     controller. The format of the interrupt specifier depends on the
+     parent interrupt controller.
+
+   b) PCI host bridge:
+
+   Required properties:
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 2.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - device_type: must be "pci"
+
+   - bus-range: PCI bus numbers covered
+
+   - ranges: specifies the ranges for the PCI memory and I/O regions
+
+   - interrupt-map-mask,
+   - interrupt-map: standard PCI properties to define the mapping of the
+     PCI interface to interrupt numbers.
+
+   The PCI host bridge node migh have additional sub-nodes representing
+   the onboard PCI devices/PCI slots. Each such sub-node must have the
+   following mandatory properties:
+
+     - reg: used only for interrupt mapping, so only the first four bytes
+       are used to refer to the correct bus number and device number.
+
+     - device_type: must be "pci"
+
+   If a given sub-node represents a PCI bridge it must have following
+   mandatory properties as well:
+
+     - #address-cells: must be set to <3>
+
+     - #size-cells: must set to <2>
+
+     - #interrupt-cells: must be set to <1>
+
+     - interrupt-map-mask,
+     - interrupt-map: standard PCI properties to define the mapping of the
+       PCI interface to interrupt numbers.
+
+   Besides the required properties the sub-nodes may have these optional
+   properties:
+
+     - status: indicates the operational status of the sub-node.
+       Value must be either "disabled" or "okay".
+
+3) Example:
+
+   a) SoC specific dtsi file:
+
+	pci@10140000 {
+		compatible = "ralink,rt3883-pci";
+		reg = <0x10140000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges; /* direct mapping */
+
+		status = "disabled";
+
+		pciintc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+		};
+
+		host-bridge {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			device_type = "pci";
+
+			bus-range = <0 255>;
+			ranges = <
+				0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+				0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+			>;
+
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 17 */
+				0x8800 0 0 1 &pciintc 18
+				0x8800 0 0 2 &pciintc 18
+				0x8800 0 0 3 &pciintc 18
+				0x8800 0 0 4 &pciintc 18
+				/* IDSEL 18 */
+				0x9000 0 0 1 &pciintc 19
+				0x9000 0 0 2 &pciintc 19
+				0x9000 0 0 3 &pciintc 19
+				0x9000 0 0 4 &pciintc 19
+			>;
+
+			pci-bridge@1 {
+				reg = <0x0800 0 0 0 0>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				interrupt-map-mask = <0x0 0 0 0>;
+				interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+				status = "disabled";
+			};
+
+			pci-slot@17 {
+				reg = <0x8800 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+
+			pci-slot@18 {
+				reg = <0x9000 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+		};
+	};
+
+   b) Board specific dts file:
+
+	pci@10140000 {
+		status = "okay";
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};

arch/mips/Kconfig

@@ -95,6 +95,7 @@ config ATH79
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select IRQ_CPU
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
@@ -131,7 +132,6 @@ config BCM63XX
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
-	select NR_CPUS_DEFAULT_2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -445,6 +445,8 @@ config RALINK
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
+	select ARCH_HAS_RESET_CONTROLLER
+	select RESET_CONTROLLER
 
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
@@ -609,7 +611,6 @@ config SIBYTE_SWARM
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
-	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -623,7 +624,6 @@ config SIBYTE_LITTLESUR
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
-	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -635,7 +635,6 @@ config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
 	select DMA_COHERENT
-	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -731,6 +730,7 @@ config CAVIUM_OCTEON_SOC
 	select USB_ARCH_HAS_OHCI
 	select USB_ARCH_HAS_EHCI
 	select HOLES_IN_ZONE
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -1860,7 +1860,6 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
-	select NR_CPUS_DEFAULT_2
 	select SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select SYS_SUPPORTS_SMP
@@ -2171,12 +2170,6 @@ config SYS_SUPPORTS_MIPS_CMP
 config SYS_SUPPORTS_SMP
 	bool
 
-config NR_CPUS_DEFAULT_1
-	bool
-
-config NR_CPUS_DEFAULT_2
-	bool
-
 config NR_CPUS_DEFAULT_4
 	bool
 
@@ -2194,10 +2187,8 @@ config NR_CPUS_DEFAULT_64
 
 config NR_CPUS
 	int "Maximum number of CPUs (2-64)"
-	range 1 64 if NR_CPUS_DEFAULT_1
+	range 2 64
 	depends on SMP
-	default "1" if NR_CPUS_DEFAULT_1
-	default "2" if NR_CPUS_DEFAULT_2
 	default "4" if NR_CPUS_DEFAULT_4
 	default "8" if NR_CPUS_DEFAULT_8
 	default "16" if NR_CPUS_DEFAULT_16

arch/mips/Makefile

@@ -194,6 +194,8 @@ include $(srctree)/arch/mips/Kbuild.platforms
 ifdef CONFIG_PHYSICAL_START
 load-y					= $(CONFIG_PHYSICAL_START)
 endif
+entry-y				= 0x$(shell $(NM) vmlinux 2>/dev/null \
+					| grep "\bkernel_entry\b" | cut -f1 -d \ )
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
@@ -225,6 +227,9 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
+bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y)
+
 LDFLAGS			+= -m $(ld-emul)
 
 ifdef CONFIG_CC_STACKPROTECTOR
@@ -254,9 +259,25 @@ drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 # suspend and hibernation support
 drivers-$(CONFIG_PM)	+= arch/mips/power/
 
+# boot image targets (arch/mips/boot/)
+boot-y			:= vmlinux.bin
+boot-y			+= vmlinux.ecoff
+boot-y			+= vmlinux.srec
+ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0)
+boot-y			+= uImage
+boot-y			+= uImage.gz
+endif
+
+# compressed boot image targets (arch/mips/boot/compressed/)
+bootz-y			:= vmlinuz
+bootz-y			+= vmlinuz.bin
+bootz-y			+= vmlinuz.ecoff
+bootz-y			+= vmlinuz.srec
+
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
+	$(Q)$(MAKE) $(build)=arch/mips/lasat/image \
+		$(bootvars-y) $@
 endif
 
 #
@@ -280,13 +301,14 @@ vmlinux.64: vmlinux
 all:	$(all-y)
 
 # boot
-vmlinux.bin vmlinux.ecoff vmlinux.srec: $(vmlinux-32) FORCE
-	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@
+$(boot-y): $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
+		$(bootvars-y) arch/mips/boot/$@
 
 # boot/compressed
-vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec: $(vmlinux-32) FORCE
+$(bootz-y): $(vmlinux-32) FORCE
 	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
-	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@
+		$(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
 
 
 CLEAN_FILES += vmlinux.32 vmlinux.64
@@ -323,6 +345,8 @@ define archhelp
 	echo '  vmlinuz.ecoff        - ECOFF zboot image'
 	echo '  vmlinuz.bin          - Raw binary zboot image'
 	echo '  vmlinuz.srec         - SREC zboot image'
+	echo '  uImage               - U-Boot image'
+	echo '  uImage.gz            - U-Boot image (gzip)'
 	echo
 	echo '  These will be default as appropriate for a configured platform.'
 endef

arch/mips/ath79/clock.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
 
 #include <asm/div64.h>
 
@@ -31,92 +32,132 @@ struct clk {
 	unsigned long rate;
 };
 
-static struct clk ath79_ref_clk;
-static struct clk ath79_cpu_clk;
-static struct clk ath79_ddr_clk;
-static struct clk ath79_ahb_clk;
-static struct clk ath79_wdt_clk;
-static struct clk ath79_uart_clk;
+static void __init ath79_add_sys_clkdev(const char *id, unsigned long rate)
+{
+	struct clk *clk;
+	int err;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		panic("failed to allocate %s clock structure", id);
+
+	clk->rate = rate;
+
+	err = clk_register_clkdev(clk, id, NULL);
+	if (err)
+		panic("unable to register %s clock device", id);
+}
 
 static void __init ar71xx_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll;
 	u32 freq;
 	u32 div;
 
-	ath79_ref_clk.rate = AR71XX_BASE_FREQ;
+	ref_rate = AR71XX_BASE_FREQ;
 
 	pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
 
 	div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1;
-	freq = div * ath79_ref_clk.rate;
+	freq = div * ref_rate;
 
 	div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1;
-	ath79_cpu_clk.rate = freq / div;
+	cpu_rate = freq / div;
 
 	div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1;
-	ath79_ddr_clk.rate = freq / div;
+	ddr_rate = freq / div;
 
 	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
-	ath79_ahb_clk.rate = ath79_cpu_clk.rate / div;
+	ahb_rate = cpu_rate / div;
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
 
-	ath79_wdt_clk.rate = ath79_ahb_clk.rate;
-	ath79_uart_clk.rate = ath79_ahb_clk.rate;
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
 static void __init ar724x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll;
 	u32 freq;
 	u32 div;
 
-	ath79_ref_clk.rate = AR724X_BASE_FREQ;
+	ref_rate = AR724X_BASE_FREQ;
 	pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
 
 	div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK);
-	freq = div * ath79_ref_clk.rate;
+	freq = div * ref_rate;
 
 	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
 	freq *= div;
 
-	ath79_cpu_clk.rate = freq;
+	cpu_rate = freq;
 
 	div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
-	ath79_ddr_clk.rate = freq / div;
+	ddr_rate = freq / div;
 
 	div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-	ath79_ahb_clk.rate = ath79_cpu_clk.rate / div;
+	ahb_rate = cpu_rate / div;
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
 
-	ath79_wdt_clk.rate = ath79_ahb_clk.rate;
-	ath79_uart_clk.rate = ath79_ahb_clk.rate;
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
 static void __init ar913x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll;
 	u32 freq;
 	u32 div;
 
-	ath79_ref_clk.rate = AR913X_BASE_FREQ;
+	ref_rate = AR913X_BASE_FREQ;
 	pll = ath79_pll_rr(AR913X_PLL_REG_CPU_CONFIG);
 
 	div = ((pll >> AR913X_PLL_DIV_SHIFT) & AR913X_PLL_DIV_MASK);
-	freq = div * ath79_ref_clk.rate;
+	freq = div * ref_rate;
 
-	ath79_cpu_clk.rate = freq;
+	cpu_rate = freq;
 
 	div = ((pll >> AR913X_DDR_DIV_SHIFT) & AR913X_DDR_DIV_MASK) + 1;
-	ath79_ddr_clk.rate = freq / div;
+	ddr_rate = freq / div;
 
 	div = (((pll >> AR913X_AHB_DIV_SHIFT) & AR913X_AHB_DIV_MASK) + 1) * 2;
-	ath79_ahb_clk.rate = ath79_cpu_clk.rate / div;
+	ahb_rate = cpu_rate / div;
 
-	ath79_wdt_clk.rate = ath79_ahb_clk.rate;
-	ath79_uart_clk.rate = ath79_ahb_clk.rate;
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
 static void __init ar933x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 clock_ctrl;
 	u32 cpu_config;
 	u32 freq;
@@ -124,21 +165,21 @@ static void __init ar933x_clocks_init(void)
 
 	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
 	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-		ath79_ref_clk.rate = (40 * 1000 * 1000);
+		ref_rate = (40 * 1000 * 1000);
 	else
-		ath79_ref_clk.rate = (25 * 1000 * 1000);
+		ref_rate = (25 * 1000 * 1000);
 
 	clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
 	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-		ath79_cpu_clk.rate = ath79_ref_clk.rate;
-		ath79_ahb_clk.rate = ath79_ref_clk.rate;
-		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+		cpu_rate = ref_rate;
+		ahb_rate = ref_rate;
+		ddr_rate = ref_rate;
 	} else {
 		cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
-		freq = ath79_ref_clk.rate / t;
+		freq = ref_rate / t;
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
@@ -153,19 +194,24 @@ static void __init ar933x_clocks_init(void)
 
 		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
-		ath79_cpu_clk.rate = freq / t;
+		cpu_rate = freq / t;
 
 		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
 		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
-		ath79_ddr_clk.rate = freq / t;
+		ddr_rate = freq / t;
 
 		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
-		ath79_ahb_clk.rate = freq / t;
+		ahb_rate = freq / t;
 	}
 
-	ath79_wdt_clk.rate = ath79_ref_clk.rate;
-	ath79_uart_clk.rate = ath79_ref_clk.rate;
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
 }
 
 static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
@@ -174,12 +220,12 @@ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
 	u64 t;
 	u32 ret;
 
-	t = ath79_ref_clk.rate;
+	t = ref;
 	t *= nint;
 	do_div(t, ref_div);
 	ret = t;
 
-	t = ath79_ref_clk.rate;
+	t = ref;
 	t *= nfrac;
 	do_div(t, ref_div * frac);
 	ret += t;
@@ -190,6 +236,10 @@ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
 
 static void __init ar934x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
 	u32 cpu_pll, ddr_pll;
 	u32 bootstrap;
@@ -199,9 +249,9 @@ static void __init ar934x_clocks_init(void)
 
 	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
 	if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
-		ath79_ref_clk.rate = 40 * 1000 * 1000;
+		ref_rate = 40 * 1000 * 1000;
 	else
-		ath79_ref_clk.rate = 25 * 1000 * 1000;
+		ref_rate = 25 * 1000 * 1000;
 
 	pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
 	if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
@@ -227,7 +277,7 @@ static void __init ar934x_clocks_init(void)
 		frac = 1 << 6;
 	}
 
-	cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+	cpu_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
 				      nfrac, frac, out_div);
 
 	pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
@@ -254,7 +304,7 @@ static void __init ar934x_clocks_init(void)
 		frac = 1 << 10;
 	}
 
-	ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+	ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
 				      nfrac, frac, out_div);
 
 	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
@@ -263,49 +313,58 @@ static void __init ar934x_clocks_init(void)
 		  AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
 
 	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
-		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+		cpu_rate = ref_rate;
 	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-		ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+		cpu_rate = cpu_pll / (postdiv + 1);
 	else
-		ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+		cpu_rate = ddr_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
 		  AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
 
 	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
-		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+		ddr_rate = ref_rate;
 	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-		ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+		ddr_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+		ddr_rate = cpu_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
 		  AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
 
 	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
-		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+		ahb_rate = ref_rate;
 	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-		ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+		ahb_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+		ahb_rate = cpu_pll / (postdiv + 1);
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
 
-	ath79_wdt_clk.rate = ath79_ref_clk.rate;
-	ath79_uart_clk.rate = ath79_ref_clk.rate;
+	clk_add_alias("wdt", NULL, "ref", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
 
 	iounmap(dpll_base);
 }
 
 static void __init qca955x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
 	u32 cpu_pll, ddr_pll;
 	u32 bootstrap;
 
 	bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
 	if (bootstrap &	QCA955X_BOOTSTRAP_REF_CLK_40)
-		ath79_ref_clk.rate = 40 * 1000 * 1000;
+		ref_rate = 40 * 1000 * 1000;
 	else
-		ath79_ref_clk.rate = 25 * 1000 * 1000;
+		ref_rate = 25 * 1000 * 1000;
 
 	pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
 	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
@@ -317,8 +376,8 @@ static void __init qca955x_clocks_init(void)
 	frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
 	       QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
 
-	cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
+	cpu_pll = nint * ref_rate / ref_div;
+	cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
 	cpu_pll /= (1 << out_div);
 
 	pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
@@ -331,8 +390,8 @@ static void __init qca955x_clocks_init(void)
 	frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
 	       QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
 
-	ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
+	ddr_pll = nint * ref_rate / ref_div;
+	ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
 	ddr_pll /= (1 << out_div);
 
 	clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
@@ -341,34 +400,39 @@ static void __init qca955x_clocks_init(void)
 		  QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
 
 	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+		cpu_rate = ref_rate;
 	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-		ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+		cpu_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+		cpu_rate = cpu_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
 		  QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
 
 	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+		ddr_rate = ref_rate;
 	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-		ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+		ddr_rate = cpu_pll / (postdiv + 1);
 	else
-		ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+		ddr_rate = ddr_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
 		  QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
 
 	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+		ahb_rate = ref_rate;
 	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-		ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+		ahb_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+		ahb_rate = cpu_pll / (postdiv + 1);
 
-	ath79_wdt_clk.rate = ath79_ref_clk.rate;
-	ath79_uart_clk.rate = ath79_ref_clk.rate;
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ref", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
 }
 
 void __init ath79_clocks_init(void)
@@ -387,46 +451,27 @@ void __init ath79_clocks_init(void)
 		qca955x_clocks_init();
 	else
 		BUG();
-
-	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, "
-		"Ref:%lu.%03luMHz",
-		ath79_cpu_clk.rate / 1000000,
-		(ath79_cpu_clk.rate / 1000) % 1000,
-		ath79_ddr_clk.rate / 1000000,
-		(ath79_ddr_clk.rate / 1000) % 1000,
-		ath79_ahb_clk.rate / 1000000,
-		(ath79_ahb_clk.rate / 1000) % 1000,
-		ath79_ref_clk.rate / 1000000,
-		(ath79_ref_clk.rate / 1000) % 1000);
 }
 
-/*
- * Linux clock API
- */
-struct clk *clk_get(struct device *dev, const char *id)
+unsigned long __init
+ath79_get_sys_clk_rate(const char *id)
 {
-	if (!strcmp(id, "ref"))
-		return &ath79_ref_clk;
-
-	if (!strcmp(id, "cpu"))
-		return &ath79_cpu_clk;
-
-	if (!strcmp(id, "ddr"))
-		return &ath79_ddr_clk;
-
-	if (!strcmp(id, "ahb"))
-		return &ath79_ahb_clk;
+	struct clk *clk;
+	unsigned long rate;
 
-	if (!strcmp(id, "wdt"))
-		return &ath79_wdt_clk;
+	clk = clk_get(NULL, id);
+	if (IS_ERR(clk))
+		panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
 
-	if (!strcmp(id, "uart"))
-		return &ath79_uart_clk;
+	rate = clk_get_rate(clk);
+	clk_put(clk);
 
-	return ERR_PTR(-ENOENT);
+	return rate;
 }
-EXPORT_SYMBOL(clk_get);
 
+/*
+ * Linux clock API
+ */
 int clk_enable(struct clk *clk)
 {
 	return 0;
@@ -443,8 +488,3 @@ unsigned long clk_get_rate(struct clk *clk)
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);

arch/mips/ath79/common.h

@@ -21,6 +21,8 @@
 #define ATH79_MEM_SIZE_MAX	(128 * 1024 * 1024)
 
 void ath79_clocks_init(void);
+unsigned long ath79_get_sys_clk_rate(const char *id);
+
 void ath79_ddr_wb_flush(unsigned int reg);
 
 void ath79_gpio_function_enable(u32 mask);

arch/mips/ath79/dev-common.c

@@ -81,21 +81,19 @@ static struct platform_device ar933x_uart_device = {
 
 void __init ath79_register_uart(void)
 {
-	struct clk *clk;
+	unsigned long uart_clk_rate;
 
-	clk = clk_get(NULL, "uart");
-	if (IS_ERR(clk))
-		panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+	uart_clk_rate = ath79_get_sys_clk_rate("uart");
 
 	if (soc_is_ar71xx() ||
 	    soc_is_ar724x() ||
 	    soc_is_ar913x() ||
 	    soc_is_ar934x() ||
 	    soc_is_qca955x()) {
-		ath79_uart_data[0].uartclk = clk_get_rate(clk);
+		ath79_uart_data[0].uartclk = uart_clk_rate;
 		platform_device_register(&ath79_uart_device);
 	} else if (soc_is_ar933x()) {
-		ar933x_uart_data.uartclk = clk_get_rate(clk);
+		ar933x_uart_data.uartclk = uart_clk_rate;
 		platform_device_register(&ar933x_uart_device);
 	} else {
 		BUG();

arch/mips/ath79/setup.c

@@ -200,7 +200,6 @@ void __init plat_mem_setup(void)
 
 	ath79_detect_sys_type();
 	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
-	ath79_clocks_init();
 
 	_machine_restart = ath79_restart;
 	_machine_halt = ath79_halt;
@@ -209,13 +208,25 @@ void __init plat_mem_setup(void)
 
 void __init plat_time_init(void)
 {
-	struct clk *clk;
+	unsigned long cpu_clk_rate;
+	unsigned long ahb_clk_rate;
+	unsigned long ddr_clk_rate;
+	unsigned long ref_clk_rate;
+
+	ath79_clocks_init();
+
+	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
+	ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
+	ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
+	ref_clk_rate = ath79_get_sys_clk_rate("ref");
 
-	clk = clk_get(NULL, "cpu");
-	if (IS_ERR(clk))
-		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz",
+		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
+		ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
+		ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
+		ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
 
-	mips_hpt_frequency = clk_get_rate(clk) / 2;
+	mips_hpt_frequency = cpu_clk_rate / 2;
 }
 
 static int __init ath79_setup(void)

arch/mips/boot/.gitignore

@@ -4,3 +4,4 @@ vmlinux.*
 zImage
 zImage.tmp
 calc_vmlinuz_load_addr
+uImage

arch/mips/boot/Makefile

@@ -40,3 +40,18 @@ quiet_cmd_srec = OBJCOPY $@
       cmd_srec = $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $@
 $(obj)/vmlinux.srec: $(VMLINUX) FORCE
 	$(call if_changed,srec)
+
+UIMAGE_LOADADDR  = $(VMLINUX_LOAD_ADDRESS)
+UIMAGE_ENTRYADDR = $(VMLINUX_ENTRY_ADDRESS)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+targets += uImage.gz
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage,gzip)
+
+targets += uImage
+$(obj)/uImage: $(obj)/uImage.gz FORCE
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'

arch/mips/boot/compressed/Makefile

@@ -25,7 +25,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
 
 KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
-	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ )
+	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
 targets := head.o decompress.o dbg.o uart-16550.o uart-alchemy.o
 

arch/mips/boot/dts/include/dt-bindings

+../../../../../include/dt-bindings

arch/mips/cavium-octeon/octeon-irq.c

@@ -1776,7 +1776,7 @@ asmlinkage void plat_irq_dispatch(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-void fixup_irqs(void)
+void octeon_fixup_irqs(void)
 {
 	irq_cpu_offline();
 }

arch/mips/cavium-octeon/setup.c

@@ -8,6 +8,7 @@
  *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #include <linux/compiler.h>
+#include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/console.h>
@@ -1139,3 +1140,30 @@ static int __init edac_devinit(void)
 	return err;
 }
 device_initcall(edac_devinit);
+
+static void __initdata *octeon_dummy_iospace;
+
+static int __init octeon_no_pci_init(void)
+{
+	/*
+	 * Initially assume there is no PCI. The PCI/PCIe platform code will
+	 * later re-initialize these to correct values if they are present.
+	 */
+	octeon_dummy_iospace = vzalloc(IO_SPACE_LIMIT);
+	set_io_port_base((unsigned long)octeon_dummy_iospace);
+	ioport_resource.start = MAX_RESOURCE;
+	ioport_resource.end = 0;
+	return 0;
+}
+core_initcall(octeon_no_pci_init);
+
+static int __init octeon_no_pci_release(void)
+{
+	/*
+	 * Release the allocated memory if a real IO space is there.
+	 */
+	if ((unsigned long)octeon_dummy_iospace != mips_io_port_base)
+		vfree(octeon_dummy_iospace);
+	return 0;
+}
+late_initcall(octeon_no_pci_release);

arch/mips/cavium-octeon/smp.c

@@ -255,8 +255,6 @@ static void octeon_cpus_done(void)
 /* State of each CPU. */
 DEFINE_PER_CPU(int, cpu_state);
 
-extern void fixup_irqs(void);
-
 static int octeon_cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
@@ -267,7 +265,7 @@ static int octeon_cpu_disable(void)
 	set_cpu_online(cpu, false);
 	cpu_clear(cpu, cpu_callin_map);
 	local_irq_disable();
-	fixup_irqs();
+	octeon_fixup_irqs();
 	local_irq_enable();
 
 	flush_cache_all();

arch/mips/configs/xway_defconfig

+CONFIG_LANTIQ=y
+CONFIG_XRX200_PHY_FW=y
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_RAW=m
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_HAMRADIO=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_LANTIQ_ETOP=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_ISDN=y
+CONFIG_INPUT=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_GPIO_MM_LANTIQ=y
+CONFIG_GPIO_STP_XWAY=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_HID is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_ZLIB is not set
+CONFIG_SQUASHFS_XZ=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32_SARWATE=y
+CONFIG_AVERAGE=y

arch/mips/dec/time.c

@@ -126,12 +126,13 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 void __init plat_time_init(void)
 {
 	u32 start, end;
-	int i = HZ / 10;
+	int i = HZ / 8;
 
 	/* Set up the rate of periodic DS1287 interrupts. */
 	ds1287_set_base_clock(HZ);
 
 	if (cpu_has_counter) {
+		ds1287_timer_state();
 		while (!ds1287_timer_state())
 			;
 
@@ -143,7 +144,7 @@ void __init plat_time_init(void)
 
 		end = read_c0_count();
 
-		mips_hpt_frequency = (end - start) * 10;
+		mips_hpt_frequency = (end - start) * 8;
 		printk(KERN_INFO "MIPS counter frequency %dHz\n",
 			mips_hpt_frequency);
 	} else if (IOASIC)

arch/mips/include/asm/Kbuild

 # MIPS headers
+generic-y += cputime.h
+generic-y += current.h
+generic-y += emergency-restart.h
+generic-y += local64.h
+generic-y += mutex.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += serial.h
 generic-y += trace_clock.h
+generic-y += ucontext.h
+generic-y += xor.h

arch/mips/include/asm/bmips.h

@@ -65,44 +65,33 @@ static inline unsigned long bmips_read_zscm_reg(unsigned int offset)
 {
 	unsigned long ret;
 
-	__asm__ __volatile__(
-		".set push\n"
-		".set noreorder\n"
-		"cache %1, 0(%2)\n"
-		"sync\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"mfc0 %0, $28, 3\n"
-		"_ssnop\n"
-		".set pop\n"
-		: "=&r" (ret)
-		: "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset)
-		: "memory");
+	barrier();
+	cache_op(Index_Load_Tag_S, ZSCM_REG_BASE + offset);
+	__sync();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	ret = read_c0_ddatalo();
+	_ssnop();
+
 	return ret;
 }
 
 static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data)
 {
-	__asm__ __volatile__(
-		".set push\n"
-		".set noreorder\n"
-		"mtc0 %0, $28, 3\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"cache %1, 0(%2)\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		: /* no outputs */
-		: "r" (data),
-		  "i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset)
-		: "memory");
+	write_c0_ddatalo(data);
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	cache_op(Index_Store_Tag_S, ZSCM_REG_BASE + offset);
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	barrier();
 }
 
 #endif /* !defined(__ASSEMBLY__) */

arch/mips/include/asm/cpu.h

@@ -141,6 +141,9 @@
 #define PRID_IMP_CAVIUM_CN68XX 0x9100
 #define PRID_IMP_CAVIUM_CN66XX 0x9200
 #define PRID_IMP_CAVIUM_CN61XX 0x9300
+#define PRID_IMP_CAVIUM_CNF71XX 0x9400
+#define PRID_IMP_CAVIUM_CN78XX 0x9500
+#define PRID_IMP_CAVIUM_CN70XX 0x9600
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
@@ -176,6 +179,7 @@
 
 #define PRID_IMP_NETLOGIC_XLP8XX	0x1000
 #define PRID_IMP_NETLOGIC_XLP3XX	0x1100
+#define PRID_IMP_NETLOGIC_XLP2XX	0x1200
 
 /*
  * Definitions for 7:0 on legacy processors
@@ -272,7 +276,7 @@ enum cpu_type_enum {
 	 */
 	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
 	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
-	CPU_XLR, CPU_XLP,
+	CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
 
 	CPU_LAST
 };

arch/mips/include/asm/cputime.h

-#ifndef __MIPS_CPUTIME_H
-#define __MIPS_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __MIPS_CPUTIME_H */

arch/mips/include/asm/current.h

-#include <asm-generic/current.h>

arch/mips/include/asm/emergency-restart.h

-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */

arch/mips/include/asm/local64.h

-#include <asm-generic/local64.h>

arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h

@@ -42,8 +42,6 @@
 #define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 
-#define cpu_has_dsp		0
-#define cpu_has_dsp2		0
 #define cpu_has_mipsmt		0
 
 #define cpu_has_64bits		0

arch/mips/include/asm/mach-cavium-octeon/gpio.h

+#ifndef __ASM_MACH_CAVIUM_OCTEON_GPIO_H
+#define __ASM_MACH_CAVIUM_OCTEON_GPIO_H
+
+#ifdef CONFIG_GPIOLIB
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#else
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+#endif
+
+#include <asm-generic/gpio.h>
+
+#define gpio_to_irq	__gpio_to_irq
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */

arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h

+/*
+ *  Lantiq FALCON specific CPU feature overrides
+ *
+ *  Copyright (C) 2013 Thomas Langer, Lantiq Deutschland
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_sb1_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+
+#define cpu_has_prefetch	1
+#define cpu_has_ejtag		1
+#define cpu_has_llsc		1
+
+#define cpu_has_mips16		1
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	1
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_dsp		1
+#define cpu_has_mipsmt		1
+
+#define cpu_has_vint		1
+#define cpu_has_veic		1
+
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg	0
+#define cpu_has_64bit_gp_regs	0
+#define cpu_has_64bit_addresses	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-ralink/mt7620.h

@@ -20,6 +20,8 @@
 #define SYSC_REG_CHIP_REV		0x0c
 #define SYSC_REG_SYSTEM_CONFIG0		0x10
 #define SYSC_REG_SYSTEM_CONFIG1		0x14
+#define SYSC_REG_CLKCFG0		0x2c
+#define SYSC_REG_CPU_SYS_CLKCFG		0x3c
 #define SYSC_REG_CPLL_CONFIG0		0x54
 #define SYSC_REG_CPLL_CONFIG1		0x58
 
@@ -29,20 +31,42 @@
 #define MT7620A_CHIP_NAME0		0x3637544d
 #define MT7620A_CHIP_NAME1		0x20203032
 
+#define SYSCFG0_XTAL_FREQ_SEL		BIT(6)
+
 #define CHIP_REV_PKG_MASK		0x1
 #define CHIP_REV_PKG_SHIFT		16
 #define CHIP_REV_VER_MASK		0xf
 #define CHIP_REV_VER_SHIFT		8
 #define CHIP_REV_ECO_MASK		0xf
 
-#define CPLL_SW_CONFIG_SHIFT		31
-#define CPLL_SW_CONFIG_MASK		0x1
-#define CPLL_CPU_CLK_SHIFT		24
-#define CPLL_CPU_CLK_MASK		0x1
-#define CPLL_MULT_RATIO_SHIFT           16
-#define CPLL_MULT_RATIO                 0x7
-#define CPLL_DIV_RATIO_SHIFT            10
-#define CPLL_DIV_RATIO                  0x3
+#define CLKCFG0_PERI_CLK_SEL		BIT(4)
+
+#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT	16
+#define CPU_SYS_CLKCFG_OCP_RATIO_MASK	0xf
+#define CPU_SYS_CLKCFG_OCP_RATIO_1	0	/* 1:1   (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_1_5	1	/* 1:1.5 (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_2	2	/* 1:2   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_2_5	3       /* 1:2.5 (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_3	4	/* 1:3   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_3_5	5	/* 1:3.5 (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_4	6	/* 1:4   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_5	7	/* 1:5   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_10	8	/* 1:10  */
+#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT	8
+#define CPU_SYS_CLKCFG_CPU_FDIV_MASK	0x1f
+#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT	0
+#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK	0x1f
+
+#define CPLL_CFG0_SW_CFG		BIT(31)
+#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT	16
+#define CPLL_CFG0_PLL_MULT_RATIO_MASK   0x7
+#define CPLL_CFG0_LC_CURFCK		BIT(15)
+#define CPLL_CFG0_BYPASS_REF_CLK	BIT(14)
+#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT	10
+#define CPLL_CFG0_PLL_DIV_RATIO_MASK	0x3
+
+#define CPLL_CFG1_CPU_AUX1		BIT(25)
+#define CPLL_CFG1_CPU_AUX0		BIT(24)
 
 #define SYSCFG0_DRAM_TYPE_MASK		0x3
 #define SYSCFG0_DRAM_TYPE_SHIFT		4

arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h

+/*
+ * Ralink MT7620 specific CPU feature overrides
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _MT7620_CPU_FEATURE_OVERRIDES_H
+#define _MT7620_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_sb1_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+
+#define cpu_has_prefetch	1
+#define cpu_has_ejtag		1
+#define cpu_has_llsc		1
+
+#define cpu_has_mips16		1
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	1
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_dsp		1
+#define cpu_has_dsp2		0
+#define cpu_has_mipsmt		0
+
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg	0
+#define cpu_has_64bit_gp_regs	0
+#define cpu_has_64bit_addresses	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* _MT7620_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mutex.h

-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>

arch/mips/include/asm/netlogic/xlp-hal/bridge.h

@@ -88,6 +88,7 @@
 #define BRIDGE_DRAM_LIMIT6		0x22
 #define BRIDGE_DRAM_LIMIT7		0x23
 
+#define BRIDGE_DRAM_NODE_TRANSLN(i)	(0x24 + (i))
 #define BRIDGE_DRAM_NODE_TRANSLN0	0x24
 #define BRIDGE_DRAM_NODE_TRANSLN1	0x25
 #define BRIDGE_DRAM_NODE_TRANSLN2	0x26
@@ -96,6 +97,8 @@
 #define BRIDGE_DRAM_NODE_TRANSLN5	0x29
 #define BRIDGE_DRAM_NODE_TRANSLN6	0x2a
 #define BRIDGE_DRAM_NODE_TRANSLN7	0x2b
+
+#define BRIDGE_DRAM_CHNL_TRANSLN(i)	(0x2c + (i))
 #define BRIDGE_DRAM_CHNL_TRANSLN0	0x2c
 #define BRIDGE_DRAM_CHNL_TRANSLN1	0x2d
 #define BRIDGE_DRAM_CHNL_TRANSLN2	0x2e
@@ -104,6 +107,7 @@
 #define BRIDGE_DRAM_CHNL_TRANSLN5	0x31
 #define BRIDGE_DRAM_CHNL_TRANSLN6	0x32
 #define BRIDGE_DRAM_CHNL_TRANSLN7	0x33
+
 #define BRIDGE_PCIEMEM_BASE0		0x34
 #define BRIDGE_PCIEMEM_BASE1		0x35
 #define BRIDGE_PCIEMEM_BASE2		0x36

arch/mips/include/asm/netlogic/xlp-hal/iomap.h

@@ -72,6 +72,12 @@
 #define XLP_IO_USB_OHCI2_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 2, 4)
 #define XLP_IO_USB_OHCI3_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 2, 5)
 
+/* XLP2xx has an updated USB block */
+#define XLP2XX_IO_USB_OFFSET(node, i)	XLP_HDR_OFFSET(node, 0, 4, i)
+#define XLP2XX_IO_USB_XHCI0_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 1)
+#define XLP2XX_IO_USB_XHCI1_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 2)
+#define XLP2XX_IO_USB_XHCI2_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 3)
+
 #define XLP_IO_NAE_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 3, 0)
 #define XLP_IO_POE_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 3, 1)
 
@@ -88,6 +94,9 @@
 #define XLP_IO_I2C0_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 2)
 #define XLP_IO_I2C1_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 3)
 #define XLP_IO_GPIO_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 4)
+/* on 2XX, all I2C busses are on the same block */
+#define XLP2XX_IO_I2C_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 7)
+
 /* system management */
 #define XLP_IO_SYS_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 6, 5)
 #define XLP_IO_JTAG_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 6)
@@ -145,6 +154,7 @@
 #define PCI_DEVICE_ID_NLM_NOR		0x1015
 #define PCI_DEVICE_ID_NLM_NAND		0x1016
 #define PCI_DEVICE_ID_NLM_MMC		0x1018
+#define PCI_DEVICE_ID_NLM_XHCI		0x101d
 
 #ifndef __ASSEMBLY__
 

arch/mips/include/asm/netlogic/xlp-hal/pic.h

@@ -208,13 +208,14 @@
 #define PIC_LOCAL_SCHEDULING		1
 #define PIC_GLOBAL_SCHEDULING		0
 
-#define PIC_CLK_HZ			133333333
-
 #define nlm_read_pic_reg(b, r)	nlm_read_reg64(b, r)
 #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
 #define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
 #define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
+/* We use PIC on node 0 as a timer */
+#define pic_timer_freq()		nlm_get_pic_frequency(0)
+
 /* IRT and h/w interrupt routines */
 static inline int
 nlm_pic_read_irt(uint64_t base, int irt_index)

arch/mips/include/asm/netlogic/xlp-hal/sys.h

@@ -117,6 +117,36 @@
 #define SYS_SCRTCH2				0x4b
 #define SYS_SCRTCH3				0x4c
 
+/* PLL registers XLP2XX */
+#define SYS_PLL_CTRL0				0x240
+#define SYS_PLL_CTRL1				0x241
+#define SYS_PLL_CTRL2				0x242
+#define SYS_PLL_CTRL3				0x243
+#define SYS_DMC_PLL_CTRL0			0x244
+#define SYS_DMC_PLL_CTRL1			0x245
+#define SYS_DMC_PLL_CTRL2			0x246
+#define SYS_DMC_PLL_CTRL3			0x247
+
+#define SYS_PLL_CTRL0_DEVX(x)			(0x248 + (x) * 4)
+#define SYS_PLL_CTRL1_DEVX(x)			(0x249 + (x) * 4)
+#define SYS_PLL_CTRL2_DEVX(x)			(0x24a + (x) * 4)
+#define SYS_PLL_CTRL3_DEVX(x)			(0x24b + (x) * 4)
+
+#define SYS_CPU_PLL_CHG_CTRL			0x288
+#define SYS_PLL_CHG_CTRL			0x289
+#define SYS_CLK_DEV_DIS				0x28a
+#define SYS_CLK_DEV_SEL				0x28b
+#define SYS_CLK_DEV_DIV				0x28c
+#define SYS_CLK_DEV_CHG				0x28d
+#define SYS_CLK_DEV_SEL_REG			0x28e
+#define SYS_CLK_DEV_DIV_REG			0x28f
+#define SYS_CPU_PLL_LOCK			0x29f
+#define SYS_SYS_PLL_LOCK			0x2a0
+#define SYS_PLL_MEM_CMD				0x2a1
+#define SYS_CPU_PLL_MEM_REQ			0x2a2
+#define SYS_SYS_PLL_MEM_REQ			0x2a3
+#define SYS_PLL_MEM_STAT			0x2a4
+
 #ifndef __ASSEMBLY__
 
 #define nlm_read_sys_reg(b, r)		nlm_read_reg(b, r)
@@ -124,5 +154,6 @@
 #define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
 #define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
+unsigned int nlm_get_pic_frequency(int node);
 #endif
 #endif

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -41,15 +41,22 @@
 #define PIC_PCIE_LINK_1_IRQ		20
 #define PIC_PCIE_LINK_2_IRQ		21
 #define PIC_PCIE_LINK_3_IRQ		22
+
 #define PIC_EHCI_0_IRQ			23
 #define PIC_EHCI_1_IRQ			24
 #define PIC_OHCI_0_IRQ			25
 #define PIC_OHCI_1_IRQ			26
 #define PIC_OHCI_2_IRQ			27
 #define PIC_OHCI_3_IRQ			28
+#define PIC_2XX_XHCI_0_IRQ		23
+#define PIC_2XX_XHCI_1_IRQ		24
+#define PIC_2XX_XHCI_2_IRQ		25
+
 #define PIC_MMC_IRQ			29
 #define PIC_I2C_0_IRQ			30
 #define PIC_I2C_1_IRQ			31
+#define PIC_I2C_2_IRQ			32
+#define PIC_I2C_3_IRQ			33
 
 #ifndef __ASSEMBLY__
 
@@ -59,7 +66,17 @@ void xlp_wakeup_secondary_cpus(void);
 
 void xlp_mmu_init(void);
 void nlm_hal_init(void);
+int xlp_get_dram_map(int n, uint64_t *dram_map);
+
+/* Device tree related */
 void *xlp_dt_init(void *fdtp);
 
+static inline int cpu_is_xlpii(void)
+{
+	int chip = read_c0_prid() & 0xff00;
+
+	return chip == PRID_IMP_NETLOGIC_XLP2XX;
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_NLM_XLP_H */

arch/mips/include/asm/netlogic/xlr/pic.h

@@ -36,6 +36,8 @@
 #define _ASM_NLM_XLR_PIC_H
 
 #define PIC_CLK_HZ			66666666
+#define pic_timer_freq()		PIC_CLK_HZ
+
 /* PIC hardware interrupt numbers */
 #define PIC_IRT_WD_INDEX		0
 #define PIC_IRT_TIMER_0_INDEX		1

arch/mips/include/asm/octeon/octeon.h

@@ -251,4 +251,6 @@ extern void (*octeon_irq_setup_secondary)(void);
 typedef void (*octeon_irq_ip4_handler_t)(void);
 void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
 
+extern void octeon_fixup_irqs(void);
+
 #endif /* __ASM_OCTEON_OCTEON_H */

arch/mips/include/asm/parport.h

-#include <asm-generic/parport.h>

arch/mips/include/asm/percpu.h

-#ifndef __ASM_PERCPU_H
-#define __ASM_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_PERCPU_H */

arch/mips/include/asm/scatterlist.h

-#ifndef __ASM_SCATTERLIST_H
-#define __ASM_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SCATTERLIST_H */

arch/mips/include/asm/sections.h

-#ifndef _ASM_SECTIONS_H
-#define _ASM_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* _ASM_SECTIONS_H */

arch/mips/include/asm/segment.h

-#ifndef _ASM_SEGMENT_H
-#define _ASM_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif /* _ASM_SEGMENT_H */

arch/mips/include/asm/serial.h

-#include <asm-generic/serial.h>

arch/mips/include/asm/ucontext.h

-#include <asm-generic/ucontext.h>

arch/mips/include/asm/xor.h

-#include <asm-generic/xor.h>

arch/mips/include/uapi/asm/Kbuild

 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
-header-y += auxvec.h
+generic-y += auxvec.h
+generic-y += ipcbuf.h
+
 header-y += bitsperlong.h
 header-y += break.h
 header-y += byteorder.h
@@ -11,7 +13,6 @@ header-y += fcntl.h
 header-y += inst.h
 header-y += ioctl.h
 header-y += ioctls.h
-header-y += ipcbuf.h
 header-y += kvm_para.h
 header-y += mman.h
 header-y += msgbuf.h

arch/mips/include/uapi/asm/auxvec.h

-#ifndef _ASM_AUXVEC_H
-#define _ASM_AUXVEC_H
-
-#endif /* _ASM_AUXVEC_H */

arch/mips/include/uapi/asm/ipcbuf.h

-#include <asm-generic/ipcbuf.h>

arch/mips/kernel/cpu-probe.c

@@ -852,10 +852,17 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_CAVIUM_CN63XX:
 	case PRID_IMP_CAVIUM_CN66XX:
 	case PRID_IMP_CAVIUM_CN68XX:
+	case PRID_IMP_CAVIUM_CNF71XX:
 		c->cputype = CPU_CAVIUM_OCTEON2;
 		__cpu_name[cpu] = "Cavium Octeon II";
 		set_elf_platform(cpu, "octeon2");
 		break;
+	case PRID_IMP_CAVIUM_CN70XX:
+	case PRID_IMP_CAVIUM_CN78XX:
+		c->cputype = CPU_CAVIUM_OCTEON3;
+		__cpu_name[cpu] = "Cavium Octeon III";
+		set_elf_platform(cpu, "octeon3");
+		break;
 	default:
 		printk(KERN_INFO "Unknown Octeon chip!\n");
 		c->cputype = CPU_UNKNOWN;
@@ -899,6 +906,11 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 			MIPS_CPU_LLSC);
 
 	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_NETLOGIC_XLP2XX:
+		c->cputype = CPU_XLP;
+		__cpu_name[cpu] = "Broadcom XLPII";
+		break;
+
 	case PRID_IMP_NETLOGIC_XLP8XX:
 	case PRID_IMP_NETLOGIC_XLP3XX:
 		c->cputype = CPU_XLP;

arch/mips/kernel/csrc-ioasic.c

@@ -41,9 +41,9 @@ void __init dec_ioasic_clocksource_init(void)
 {
 	unsigned int freq;
 	u32 start, end;
-	int i = HZ / 10;
-
+	int i = HZ / 8;
 
+	ds1287_timer_state();
 	while (!ds1287_timer_state())
 		;
 
@@ -55,7 +55,7 @@ void __init dec_ioasic_clocksource_init(void)
 
 	end = dec_ioasic_hpt_read(&clocksource_dec);
 
-	freq = (end - start) * 10;
+	freq = (end - start) * 8;
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
 
 	clocksource_dec.rating = 200 + freq / 10000000;

arch/mips/kernel/idle.c

@@ -166,6 +166,7 @@ void __init check_wait(void)
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 	case CPU_JZRISC:
 	case CPU_LOONGSON1:
 	case CPU_XLR:

arch/mips/kernel/mcount.S

@@ -83,7 +83,7 @@ _mcount:
 	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
 #endif
 
-	move	a0, ra		/* arg1: self return address */
+	PTR_SUBU a0, ra, 8	/* arg1: self address */
 	.globl ftrace_call
 ftrace_call:
 	nop	/* a placeholder for the call to a real tracing function */

arch/mips/kernel/relocate_kernel.S

@@ -26,6 +26,12 @@ process_entry:
 	PTR_L		s2, (s0)
 	PTR_ADD		s0, s0, SZREG
 
+	/*
+	 * In case of a kdump/crash kernel, the indirection page is not
+	 * populated as the kernel is directly copied to a reserved location
+	 */
+	beqz		s2, done
+
 	/* destination page */
 	and		s3, s2, 0x1
 	beq		s3, zero, 1f

arch/mips/kernel/setup.c

@@ -552,6 +552,52 @@ static void __init arch_mem_addpart(phys_t mem, phys_t end, int type)
 	add_memory_region(mem, size, type);
 }
 
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long long total;
+
+	total = max_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+static void __init mips_parse_crashkernel(void)
+{
+	unsigned long long total_mem;
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret != 0 || crash_size <= 0)
+		return;
+
+	crashk_res.start = crash_base;
+	crashk_res.end	 = crash_base + crash_size - 1;
+}
+
+static void __init request_crashkernel(struct resource *res)
+{
+	int ret;
+
+	ret = request_resource(res, &crashk_res);
+	if (!ret)
+		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
+			(unsigned long)((crashk_res.end -
+					 crashk_res.start + 1) >> 20),
+			(unsigned long)(crashk_res.start  >> 20));
+}
+#else /* !defined(CONFIG_KEXEC)		*/
+static void __init mips_parse_crashkernel(void)
+{
+}
+
+static void __init request_crashkernel(struct resource *res)
+{
+}
+#endif /* !defined(CONFIG_KEXEC)  */
+
 static void __init arch_mem_init(char **cmdline_p)
 {
 	extern void plat_mem_setup(void);
@@ -608,6 +654,8 @@ static void __init arch_mem_init(char **cmdline_p)
 				BOOTMEM_DEFAULT);
 	}
 #endif
+
+	mips_parse_crashkernel();
 #ifdef CONFIG_KEXEC
 	if (crashk_res.start != crashk_res.end)
 		reserve_bootmem(crashk_res.start,
@@ -620,52 +668,6 @@ static void __init arch_mem_init(char **cmdline_p)
 	paging_init();
 }
 
-#ifdef CONFIG_KEXEC
-static inline unsigned long long get_total_mem(void)
-{
-	unsigned long long total;
-
-	total = max_pfn - min_low_pfn;
-	return total << PAGE_SHIFT;
-}
-
-static void __init mips_parse_crashkernel(void)
-{
-	unsigned long long total_mem;
-	unsigned long long crash_size, crash_base;
-	int ret;
-
-	total_mem = get_total_mem();
-	ret = parse_crashkernel(boot_command_line, total_mem,
-				&crash_size, &crash_base);
-	if (ret != 0 || crash_size <= 0)
-		return;
-
-	crashk_res.start = crash_base;
-	crashk_res.end	 = crash_base + crash_size - 1;
-}
-
-static void __init request_crashkernel(struct resource *res)
-{
-	int ret;
-
-	ret = request_resource(res, &crashk_res);
-	if (!ret)
-		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
-			(unsigned long)((crashk_res.end -
-				crashk_res.start + 1) >> 20),
-			(unsigned long)(crashk_res.start  >> 20));
-}
-#else /* !defined(CONFIG_KEXEC)	 */
-static void __init mips_parse_crashkernel(void)
-{
-}
-
-static void __init request_crashkernel(struct resource *res)
-{
-}
-#endif /* !defined(CONFIG_KEXEC)  */
-
 static void __init resource_init(void)
 {
 	int i;
@@ -678,11 +680,6 @@ static void __init resource_init(void)
 	data_resource.start = __pa_symbol(&_etext);
 	data_resource.end = __pa_symbol(&_edata) - 1;
 
-	/*
-	 * Request address space for all standard RAM.
-	 */
-	mips_parse_crashkernel();
-
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
 		struct resource *res;
 		unsigned long start, end;

arch/mips/kernel/time.c

@@ -121,6 +121,14 @@ void __init time_init(void)
 {
 	plat_time_init();
 
-	if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+	/*
+	 * The use of the R4k timer as a clock event takes precedence;
+	 * if reading the Count register might interfere with the timer
+	 * interrupt, then we don't use the timer as a clock source.
+	 * We may still use the timer as a clock source though if the
+	 * timer interrupt isn't reliable; the interference doesn't
+	 * matter then, because we don't use the interrupt.
+	 */
+	if (mips_clockevent_init() != 0 || !cpu_has_mfc0_count_bug())
 		init_mips_clocksource();
 }

arch/mips/kernel/vmlinux.lds.S

@@ -179,5 +179,6 @@ SECTIONS
 		*(.options)
 		*(.pdr)
 		*(.reginfo)
+		*(.eh_frame)
 	}
 }

arch/mips/lantiq/falcon/sysctrl.c

@@ -48,6 +48,7 @@
 #define CPU0CC_CPUDIV		0x0001
 
 /* Activation Status Register */
+#define ACTS_ASC0_ACT	0x00001000
 #define ACTS_ASC1_ACT	0x00000800
 #define ACTS_I2C_ACT	0x00004000
 #define ACTS_P0		0x00010000
@@ -108,6 +109,7 @@ static void sysctl_deactivate(struct clk *clk)
 static int sysctl_clken(struct clk *clk)
 {
 	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
 	sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
 	return 0;
 }
@@ -256,6 +258,7 @@ void __init ltq_soc_init(void)
 	clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
 	clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
 	clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
-	clkdev_add_sys("1e100C00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
+	clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
+	clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
 	clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
 }

arch/mips/lantiq/xway/Makefile

-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
 
 obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o

arch/mips/lantiq/xway/dcdc.c

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH
+ */
+
+#include <linux/ioport.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+/* Bias and regulator Setup Register */
+#define DCDC_BIAS_VREG0	0xa
+/* Bias and regulator Setup Register */
+#define DCDC_BIAS_VREG1	0xb
+
+#define dcdc_w8(x, y)	ltq_w8((x), dcdc_membase + (y))
+#define dcdc_r8(x)	ltq_r8(dcdc_membase + (x))
+
+static void __iomem *dcdc_membase;
+
+static int dcdc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dcdc_membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dcdc_membase))
+		return PTR_ERR(dcdc_membase);
+
+	dev_info(&pdev->dev, "Core Voltage : %d mV\n",
+		dcdc_r8(DCDC_BIAS_VREG1) * 8);
+
+	return 0;
+}
+
+static const struct of_device_id dcdc_match[] = {
+	{ .compatible = "lantiq,dcdc-xrx200" },
+	{},
+};
+
+static struct platform_driver dcdc_driver = {
+	.probe = dcdc_probe,
+	.driver = {
+		.name = "dcdc-xrx200",
+		.owner = THIS_MODULE,
+		.of_match_table = dcdc_match,
+	},
+};
+
+int __init dcdc_init(void)
+{
+	int ret = platform_driver_register(&dcdc_driver);
+
+	if (ret)
+		pr_info("dcdc: Error registering platform driver\n");
+	return ret;
+}
+
+arch_initcall(dcdc_init);

arch/mips/lasat/image/Makefile

@@ -13,13 +13,11 @@ endif
 MKLASATIMG = mklasatimg
 MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
 KERNEL_IMAGE = vmlinux
-KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
-KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
 
 LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
 
-HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-		-D_kernel_entry=0x$(KERNEL_ENTRY) \
+HEAD_DEFINES := -D_kernel_start=$(VMLINUX_LOAD_ADDRESS) \
+		-D_kernel_entry=$(VMLINUX_ENTRY_ADDRESS) \
 		-D VERSION="\"$(Version)\"" \
 		-D TIMESTAMP=$(shell date +%s)
 

arch/mips/loongson/common/Makefile

@@ -3,8 +3,9 @@
 #
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
-    pci.o bonito-irq.o mem.o machtype.o platform.o
+    bonito-irq.o mem.o machtype.o platform.o
 obj-$(CONFIG_GPIOLIB) += gpio.o
+obj-$(CONFIG_PCI) += pci.o
 
 #
 # Serial port support

arch/mips/math-emu/cp1emu.c

@@ -436,7 +436,6 @@ static int microMIPS32_to_MIPS32(union mips_instruction *insn_ptr)
 				break;
 			default:
 				return SIGILL;
-				break;
 			}
 			break;
 		case mm_32f_74_op:	/* c.cond.fmt */
@@ -451,12 +450,10 @@ static int microMIPS32_to_MIPS32(union mips_instruction *insn_ptr)
 			break;
 		default:
 			return SIGILL;
-			break;
 		}
 		break;
 	default:
 		return SIGILL;
-		break;
 	}
 
 	*insn_ptr = mips32_insn;
@@ -491,7 +488,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 						dec_insn.next_pc_inc;
 				*contpc = regs->regs[insn.mm_i_format.rs];
 				return 1;
-				break;
 			}
 		}
 		break;
@@ -513,7 +509,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_bgezals_op:
 		case mm_bgezal_op:
 			regs->regs[31] = regs->cp0_epc +
@@ -530,7 +525,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_blez_op:
 			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
 				*contpc = regs->cp0_epc +
@@ -541,7 +535,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_bgtz_op:
 			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
 				*contpc = regs->cp0_epc +
@@ -552,7 +545,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_bc2f_op:
 		case mm_bc1f_op:
 			bc_false = 1;
@@ -580,7 +572,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				*contpc = regs->cp0_epc +
 					dec_insn.pc_inc + dec_insn.next_pc_inc;
 			return 1;
-			break;
 		}
 		break;
 	case mm_pool16c_op:
@@ -593,7 +584,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		case mm_jr16_op:
 			*contpc = regs->regs[insn.mm_i_format.rs];
 			return 1;
-			break;
 		}
 		break;
 	case mm_beqz16_op:
@@ -605,7 +595,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 			*contpc = regs->cp0_epc +
 				dec_insn.pc_inc + dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_bnez16_op:
 		if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] != 0)
 			*contpc = regs->cp0_epc +
@@ -615,12 +604,10 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 			*contpc = regs->cp0_epc +
 				dec_insn.pc_inc + dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_b16_op:
 		*contpc = regs->cp0_epc + dec_insn.pc_inc +
 			 (insn.mm_b0_format.simmediate << 1);
 		return 1;
-		break;
 	case mm_beq32_op:
 		if (regs->regs[insn.mm_i_format.rs] ==
 		    regs->regs[insn.mm_i_format.rt])
@@ -632,7 +619,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_bne32_op:
 		if (regs->regs[insn.mm_i_format.rs] !=
 		    regs->regs[insn.mm_i_format.rt])
@@ -643,7 +629,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 			*contpc = regs->cp0_epc +
 				dec_insn.pc_inc + dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_jalx32_op:
 		regs->regs[31] = regs->cp0_epc +
 			dec_insn.pc_inc + dec_insn.next_pc_inc;
@@ -652,7 +637,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		*contpc <<= 28;
 		*contpc |= (insn.j_format.target << 2);
 		return 1;
-		break;
 	case mm_jals32_op:
 	case mm_jal32_op:
 		regs->regs[31] = regs->cp0_epc +
@@ -665,7 +649,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		*contpc |= (insn.j_format.target << 1);
 		set_isa16_mode(*contpc);
 		return 1;
-		break;
 	}
 	return 0;
 }
@@ -694,7 +677,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		case jr_op:
 			*contpc = regs->regs[insn.r_format.rs];
 			return 1;
-			break;
 		}
 		break;
 	case bcond_op:
@@ -716,7 +698,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case bgezal_op:
 		case bgezall_op:
 			regs->regs[31] = regs->cp0_epc +
@@ -734,7 +715,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		}
 		break;
 	case jalx_op:
@@ -752,7 +732,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		/* Set microMIPS mode bit: XOR for jalx. */
 		*contpc ^= bit;
 		return 1;
-		break;
 	case beq_op:
 	case beql_op:
 		if (regs->regs[insn.i_format.rs] ==
@@ -765,7 +744,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case bne_op:
 	case bnel_op:
 		if (regs->regs[insn.i_format.rs] !=
@@ -778,7 +756,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case blez_op:
 	case blezl_op:
 		if ((long)regs->regs[insn.i_format.rs] <= 0)
@@ -790,7 +767,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case bgtz_op:
 	case bgtzl_op:
 		if ((long)regs->regs[insn.i_format.rs] > 0)
@@ -802,7 +778,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	case lwc2_op: /* This is bbit0 on Octeon */
 		if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt)) == 0)
@@ -856,7 +831,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 						dec_insn.pc_inc +
 						dec_insn.next_pc_inc;
 				return 1;
-				break;
 			case 1:	/* bc1t */
 			case 3:	/* bc1tl */
 				if (fcr31 & (1 << bit))
@@ -868,7 +842,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 						dec_insn.pc_inc +
 						dec_insn.next_pc_inc;
 				return 1;
-				break;
 			}
 		}
 		break;

arch/mips/mm/c-octeon.c

@@ -224,6 +224,20 @@ static void probe_octeon(void)
 		c->options |= MIPS_CPU_PREFETCH;
 		break;
 
+	case CPU_CAVIUM_OCTEON3:
+		c->icache.linesz = 128;
+		c->icache.sets = 16;
+		c->icache.ways = 39;
+		c->icache.flags |= MIPS_CACHE_VTAG;
+		icache_size = c->icache.sets * c->icache.ways * c->icache.linesz;
+
+		c->dcache.linesz = 128;
+		c->dcache.ways = 32;
+		c->dcache.sets = 8;
+		dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz;
+		c->options |= MIPS_CPU_PREFETCH;
+		break;
+
 	default:
 		panic("Unsupported Cavium Networks CPU type");
 		break;

arch/mips/mm/dma-default.c

@@ -50,16 +50,20 @@ static inline struct page *dma_addr_to_page(struct device *dev,
 }
 
 /*
+ * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
+ * speculatively fill random cachelines with stale data at any time,
+ * requiring an extra flush post-DMA.
+ *
  * Warning on the terminology - Linux calls an uncached area coherent;
  * MIPS terminology calls memory areas with hardware maintained coherency
  * coherent.
  */
-
-static inline int cpu_is_noncoherent_r10000(struct device *dev)
+static inline int cpu_needs_post_dma_flush(struct device *dev)
 {
 	return !plat_device_is_coherent(dev) &&
-	       (current_cpu_type() == CPU_R10000 ||
-	       current_cpu_type() == CPU_R12000);
+	       (boot_cpu_type() == CPU_R10000 ||
+		boot_cpu_type() == CPU_R12000 ||
+		boot_cpu_type() == CPU_BMIPS5000);
 }
 
 static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
@@ -230,7 +234,7 @@ static inline void __dma_sync(struct page *page,
 static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
-	if (cpu_is_noncoherent_r10000(dev))
+	if (cpu_needs_post_dma_flush(dev))
 		__dma_sync(dma_addr_to_page(dev, dma_addr),
 			   dma_addr & ~PAGE_MASK, size, direction);
 
@@ -284,7 +288,7 @@ static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 static void mips_dma_sync_single_for_cpu(struct device *dev,
 	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 {
-	if (cpu_is_noncoherent_r10000(dev))
+	if (cpu_needs_post_dma_flush(dev))
 		__dma_sync(dma_addr_to_page(dev, dma_handle),
 			   dma_handle & ~PAGE_MASK, size, direction);
 }
@@ -305,7 +309,7 @@ static void mips_dma_sync_sg_for_cpu(struct device *dev,
 
 	/* Make sure that gcc doesn't leave the empty loop body.  */
 	for (i = 0; i < nelems; i++, sg++) {
-		if (cpu_is_noncoherent_r10000(dev))
+		if (cpu_needs_post_dma_flush(dev))
 			__dma_sync(sg_page(sg), sg->offset, sg->length,
 				   direction);
 	}

arch/mips/mm/gup.c

@@ -12,6 +12,7 @@
 #include <linux/swap.h>
 #include <linux/hugetlb.h>
 
+#include <asm/cpu-features.h>
 #include <asm/pgtable.h>
 
 static inline pte_t gup_get_pte(pte_t *ptep)
@@ -273,7 +274,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 
 	end = start + len;
-	if (end < start)
+	if (end < start || cpu_has_dc_aliases)
 		goto slow_irqon;
 
 	/* XXX: batch / limit 'nr' */

arch/mips/mm/init.c

@@ -254,6 +254,7 @@ void copy_from_user_page(struct vm_area_struct *vma,
 			SetPageDcacheDirty(page);
 	}
 }
+EXPORT_SYMBOL_GPL(copy_from_user_page);
 
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)

arch/mips/mm/tlb-funcs.S

@@ -16,10 +16,12 @@
 
 #define FASTPATH_SIZE	128
 
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 LEAF(tlbmiss_handler_setup_pgd)
 	.space		16 * 4
 END(tlbmiss_handler_setup_pgd)
 EXPORT(tlbmiss_handler_setup_pgd_end)
+#endif
 
 LEAF(handle_tlbm)
 	.space		FASTPATH_SIZE * 4

arch/mips/mm/tlbex.c

@@ -85,6 +85,7 @@ static int use_bbit_insns(void)
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 		return 1;
 	default:
 		return 0;
@@ -95,6 +96,7 @@ static int use_lwx_insns(void)
 {
 	switch (current_cpu_type()) {
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 		return 1;
 	default:
 		return 0;

arch/mips/netlogic/Kconfig

@@ -19,6 +19,15 @@ config DT_XLP_SVP
 	  pointer to the kernel.  The corresponding DTS file is at
 	  arch/mips/netlogic/dts/xlp_svp.dts
 
+config DT_XLP_FVP
+	bool "Built-in device tree for XLP FVP boards"
+	default y
+	help
+	  Add an FDT blob for XLP FVP board into the kernel.
+	  This DTB will be used if the firmware does not pass in a DTB
+	  pointer to the kernel.  The corresponding DTS file is at
+	  arch/mips/netlogic/dts/xlp_fvp.dts
+
 config NLM_MULTINODE
 	bool "Support for multi-chip boards"
 	depends on NLM_XLP_BOARD

arch/mips/netlogic/common/smp.c

@@ -106,8 +106,6 @@ void nlm_early_init_secondary(int cpu)
 {
 	change_c0_config(CONF_CM_CMASK, 0x3);
 #ifdef CONFIG_CPU_XLP
-	/* mmu init, once per core */
-	if (cpu % NLM_THREADS_PER_CORE == 0)
 	xlp_mmu_init();
 #endif
 	write_c0_ebase(nlm_current_node()->ebase);

arch/mips/netlogic/common/time.c

@@ -45,6 +45,7 @@
 #if defined(CONFIG_CPU_XLP)
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
 #include <asm/netlogic/xlp-hal/pic.h>
 #elif defined(CONFIG_CPU_XLR)
 #include <asm/netlogic/xlr/iomap.h>
@@ -91,7 +92,7 @@ static void nlm_init_pic_timer(void)
 		csrc_pic.read	= nlm_get_pic_timer;
 	}
 	csrc_pic.rating = 1000;
-	clocksource_register_hz(&csrc_pic, PIC_CLK_HZ);
+	clocksource_register_hz(&csrc_pic, pic_timer_freq());
 }
 
 void __init plat_time_init(void)

arch/mips/netlogic/dts/Makefile

 obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
 obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o
+obj-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb.o

arch/mips/netlogic/dts/xlp_evp.dts

@@ -9,19 +9,12 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	memory {
-		device_type = "memory";
-		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
-			0 0x20000000 0 0xa0000000	// 2560M at 512M
-			0 0xe0000000 1 0x00000000>;
-	};
-
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
 
 		serial0: serial@30000 {
 			device_type = "serial";

arch/mips/netlogic/dts/xlp_fvp.dts

+/*
+ * XLP2XX Device Tree Source for FVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-FVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x30100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		serial1: serial@31000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x31100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <18>;
+		};
+		i2c0: ocores@37100 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x37100 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <30>;
+		};
+		i2c1: ocores@37120 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x37120 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <31>;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+
+			dtt@4c {
+				compatible = "national,lm90";
+				reg = <0x4c>;
+			};
+		};
+		pic: pic@4000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x4000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};

arch/mips/netlogic/dts/xlp_svp.dts

@@ -9,19 +9,12 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	memory {
-		device_type = "memory";
-		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
-			0 0x20000000 0 0xa0000000	// 2560M at 512M
-			0 0xe0000000 0 0x40000000>;
-	};
-
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
 
 		serial0: serial@30000 {
 			device_type = "serial";

arch/mips/netlogic/xlp/Makefile

 obj-y				+= setup.o nlm_hal.o cop2-ex.o dt.o
 obj-$(CONFIG_SMP)		+= wakeup.o
 obj-$(CONFIG_USB)		+= usb-init.o
+obj-$(CONFIG_USB)		+= usb-init-xlp2.o

arch/mips/netlogic/xlp/dt.c

@@ -39,12 +39,18 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 
-extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[];
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
+	__dtb_xlp_fvp_begin[], __dtb_start[];
 
 void __init *xlp_dt_init(void *fdtp)
 {
 	if (!fdtp) {
 		switch (current_cpu_data.processor_id & 0xff00) {
+#ifdef CONFIG_DT_XLP_FVP
+		case PRID_IMP_NETLOGIC_XLP2XX:
+			fdtp = __dtb_xlp_fvp_begin;
+			break;
+#endif
 #ifdef CONFIG_DT_XLP_SVP
 		case PRID_IMP_NETLOGIC_XLP3XX:
 			fdtp = __dtb_xlp_svp_begin;

arch/mips/netlogic/xlp/nlm_hal.c

@@ -44,6 +44,7 @@
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/bridge.h>
 #include <asm/netlogic/xlp-hal/pic.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 
@@ -64,6 +65,7 @@ int nlm_irq_to_irt(int irq)
 	uint64_t pcibase;
 	int devoff, irt;
 
+	devoff = 0;
 	switch (irq) {
 	case PIC_UART_0_IRQ:
 		devoff = XLP_IO_UART0_OFFSET(0);
@@ -71,6 +73,34 @@ int nlm_irq_to_irt(int irq)
 	case PIC_UART_1_IRQ:
 		devoff = XLP_IO_UART1_OFFSET(0);
 		break;
+	case PIC_MMC_IRQ:
+		devoff = XLP_IO_SD_OFFSET(0);
+		break;
+	case PIC_I2C_0_IRQ:	/* I2C will be fixed up */
+	case PIC_I2C_1_IRQ:
+	case PIC_I2C_2_IRQ:
+	case PIC_I2C_3_IRQ:
+		if (cpu_is_xlpii())
+			devoff = XLP2XX_IO_I2C_OFFSET(0);
+		else
+			devoff = XLP_IO_I2C0_OFFSET(0);
+		break;
+	default:
+		if (cpu_is_xlpii()) {
+			switch (irq) {
+				/* XLP2XX has three XHCI USB controller */
+			case PIC_2XX_XHCI_0_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0);
+				break;
+			case PIC_2XX_XHCI_1_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0);
+				break;
+			case PIC_2XX_XHCI_2_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0);
+				break;
+			}
+		} else {
+			switch (irq) {
 			case PIC_EHCI_0_IRQ:
 				devoff = XLP_IO_USB_EHCI0_OFFSET(0);
 				break;
@@ -89,26 +119,22 @@ int nlm_irq_to_irt(int irq)
 			case PIC_OHCI_3_IRQ:
 				devoff = XLP_IO_USB_OHCI3_OFFSET(0);
 				break;
-	case PIC_MMC_IRQ:
-		devoff = XLP_IO_SD_OFFSET(0);
-		break;
-	case PIC_I2C_0_IRQ:
-		devoff = XLP_IO_I2C0_OFFSET(0);
-		break;
-	case PIC_I2C_1_IRQ:
-		devoff = XLP_IO_I2C1_OFFSET(0);
-		break;
-	default:
-		devoff = 0;
-		break;
+			}
+		}
 	}
 
 	if (devoff != 0) {
 		pcibase = nlm_pcicfg_base(devoff);
 		irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff;
-		/* HW bug, I2C 1 irt entry is off by one */
-		if (irq == PIC_I2C_1_IRQ)
-			irt = irt + 1;
+		/* HW weirdness, I2C IRT entry has to be fixed up */
+		switch (irq) {
+		case PIC_I2C_1_IRQ:
+			irt = irt + 1; break;
+		case PIC_I2C_2_IRQ:
+			irt = irt + 2; break;
+		case PIC_I2C_3_IRQ:
+			irt = irt + 3; break;
+		}
 	} else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
 		/* HW bug, PCI IRT entries are bad on early silicon, fix */
 		irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
@@ -126,6 +152,10 @@ unsigned int nlm_get_core_frequency(int node, int core)
 
 	sysbase = nlm_get_node(node)->sysbase;
 	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+	if (cpu_is_xlpii()) {
+		num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
+		denom = 3;
+	} else {
 		dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
 		pll_divf = ((rstval >> 10) & 0x7f) + 1;
 		pll_divr = ((rstval >> 8)  & 0x3) + 1;
@@ -134,11 +164,148 @@ unsigned int nlm_get_core_frequency(int node, int core)
 
 		num = 800000000ULL * pll_divf;
 		denom = 3 * pll_divr * ext_div * dfs_div;
+	}
 	do_div(num, denom);
 	return (unsigned int)num;
 }
 
+/* Calculate Frequency to the PIC from PLL.
+ * freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) /
+ * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
+ */
+static unsigned int nlm_2xx_get_pic_frequency(int node)
+{
+	u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div;
+	u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
+	u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select;
+
+	sysbase = nlm_get_node(node)->sysbase;
+
+	/* Find ref_clk_base */
+	ref_clk_select =
+		(nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
+	switch (ref_clk_select) {
+	case 0:
+		ref_clk = 200000000ULL;
+		ref_div = 3;
+		break;
+	case 1:
+		ref_clk = 100000000ULL;
+		ref_div = 1;
+		break;
+	case 2:
+		ref_clk = 125000000ULL;
+		ref_div = 1;
+		break;
+	case 3:
+		ref_clk = 400000000ULL;
+		ref_div = 3;
+		break;
+	}
+
+	/* Find the clock source PLL device for PIC */
+	reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3;
+	switch (reg_select) {
+	case 0:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0);
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2);
+		break;
+	case 1:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0));
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0));
+		break;
+	case 2:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1));
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1));
+		break;
+	case 3:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2));
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2));
+		break;
+	}
+
+	vco_post_div = (ctrl_val0 >> 5) & 0x7;
+	pll_post_div = (ctrl_val0 >> 24) & 0x7;
+	mdiv = ctrl_val2 & 0xff;
+	fdiv = (ctrl_val2 >> 8) & 0xfff;
+
+	/* Find PLL post divider value */
+	switch (pll_post_div) {
+	case 1:
+		pll_post_div = 2;
+		break;
+	case 3:
+		pll_post_div = 4;
+		break;
+	case 7:
+		pll_post_div = 8;
+		break;
+	case 6:
+		pll_post_div = 16;
+		break;
+	case 0:
+	default:
+		pll_post_div = 1;
+		break;
+	}
+
+	fdiv = fdiv/(1 << 13);
+	pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
+	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * 3;
+
+	if (pll_out_freq_den > 0)
+		do_div(pll_out_freq_num, pll_out_freq_den);
+
+	/* PIC post divider, which happens after PLL */
+	pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3;
+	do_div(pll_out_freq_num, 1 << pic_div);
+
+	return pll_out_freq_num;
+}
+
+unsigned int nlm_get_pic_frequency(int node)
+{
+	if (cpu_is_xlpii())
+		return nlm_2xx_get_pic_frequency(node);
+	else
+		return 133333333;
+}
+
 unsigned int nlm_get_cpu_frequency(void)
 {
 	return nlm_get_core_frequency(0, 0);
 }
+
+/*
+ * Fills upto 8 pairs of entries containing the DRAM map of a node
+ * if n < 0, get dram map for all nodes
+ */
+int xlp_get_dram_map(int n, uint64_t *dram_map)
+{
+	uint64_t bridgebase, base, lim;
+	uint32_t val;
+	int i, node, rv;
+
+	/* Look only at mapping on Node 0, we don't handle crazy configs */
+	bridgebase = nlm_get_bridge_regbase(0);
+	rv = 0;
+	for (i = 0; i < 8; i++) {
+		val = nlm_read_bridge_reg(bridgebase,
+					BRIDGE_DRAM_NODE_TRANSLN(i));
+		node = (val >> 1) & 0x3;
+		if (n >= 0 && n != node)
+			continue;
+		val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i));
+		val = (val >>  12) & 0xfffff;
+		base = (uint64_t) val << 20;
+		val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i));
+		val = (val >>  12) & 0xfffff;
+		if (val == 0)   /* BAR not used */
+			continue;
+		lim = ((uint64_t)val + 1) << 20;
+		dram_map[rv] = base;
+		dram_map[rv + 1] = lim;
+		rv += 2;
+	}
+	return rv;
+}

arch/mips/netlogic/xlp/setup.c

@@ -73,6 +73,23 @@ static void nlm_fixup_mem(void)
 	}
 }
 
+static void __init xlp_init_mem_from_bars(void)
+{
+	uint64_t map[16];
+	int i, n;
+
+	n = xlp_get_dram_map(-1, map);	/* -1: info for all nodes */
+	for (i = 0; i < n; i += 2) {
+		/* exclude 0x1000_0000-0x2000_0000, u-boot device */
+		if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
+			map[i+1] = 0x10000000;
+		if (map[i] > 0x10000000 && map[i] < 0x20000000)
+			map[i] = 0x20000000;
+
+		add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM);
+	}
+}
+
 void __init plat_mem_setup(void)
 {
 	panic_timeout	= 5;
@@ -82,12 +99,23 @@ void __init plat_mem_setup(void)
 
 	/* memory and bootargs from DT */
 	early_init_devtree(initial_boot_params);
+
+	if (boot_mem_map.nr_map == 0) {
+		pr_info("Using DRAM BARs for memory map.\n");
+		xlp_init_mem_from_bars();
+	}
+	/* Calculate and setup wired entries for mapped kernel */
 	nlm_fixup_mem();
 }
 
 const char *get_system_type(void)
 {
+	switch (read_c0_prid() & 0xff00) {
+	case PRID_IMP_NETLOGIC_XLP2XX:
+		return "Broadcom XLPII Series";
+	default:
 		return "Netlogic XLP Series";
+	}
 }
 
 void __init prom_free_prom_memory(void)
@@ -97,12 +125,20 @@ void __init prom_free_prom_memory(void)
 
 void xlp_mmu_init(void)
 {
+	u32 conf4;
+
+	if (cpu_is_xlpii()) {
+		/* XLPII series has extended pagesize in config 4 */
+		conf4 = read_c0_config4() & ~0x1f00u;
+		write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
+	} else {
 		/* enable extended TLB and Large Fixed TLB */
 		write_c0_config6(read_c0_config6() | 0x24);
 
-	/* set page mask of Fixed TLB in config7 */
+		/* set page mask of extended Fixed TLB in config7 */
 		write_c0_config7(PM_DEFAULT_MASK >>
 			(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+	}
 }
 
 void nlm_percpu_init(int hwcpuid)

arch/mips/netlogic/xlp/usb-init-xlp2.c

+/*
+ * Copyright (c) 2003-2013 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+#define XLPII_USB3_CTL_0		0xc0
+#define XLPII_VAUXRST			BIT(0)
+#define XLPII_VCCRST			BIT(1)
+#define XLPII_NUM2PORT			9
+#define XLPII_NUM3PORT			13
+#define XLPII_RTUNEREQ			BIT(20)
+#define XLPII_MS_CSYSREQ		BIT(21)
+#define XLPII_XS_CSYSREQ		BIT(22)
+#define XLPII_RETENABLEN		BIT(23)
+#define XLPII_TX2RX			BIT(24)
+#define XLPII_XHCIREV			BIT(25)
+#define XLPII_ECCDIS			BIT(26)
+
+#define XLPII_USB3_INT_REG		0xc2
+#define XLPII_USB3_INT_MASK		0xc3
+
+#define XLPII_USB_PHY_TEST		0xc6
+#define XLPII_PRESET			BIT(0)
+#define XLPII_ATERESET			BIT(1)
+#define XLPII_LOOPEN			BIT(2)
+#define XLPII_TESTPDHSP			BIT(3)
+#define XLPII_TESTPDSSP			BIT(4)
+#define XLPII_TESTBURNIN		BIT(5)
+
+#define XLPII_USB_PHY_LOS_LV		0xc9
+#define XLPII_LOSLEV			0
+#define XLPII_LOSBIAS			5
+#define XLPII_SQRXTX			8
+#define XLPII_TXBOOST			11
+#define XLPII_RSLKSEL			16
+#define XLPII_FSEL			20
+
+#define XLPII_USB_RFCLK_REG		0xcc
+#define XLPII_VVLD			30
+
+#define nlm_read_usb_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)	nlm_write_reg(b, r, v)
+
+#define nlm_xlpii_get_usb_pcibase(node, inst)		\
+	nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_regbase(node, inst)		\
+	(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void xlpii_usb_ack(struct irq_data *data)
+{
+	u64 port_addr;
+
+	switch (data->irq) {
+	case PIC_2XX_XHCI_0_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 1);
+		break;
+	case PIC_2XX_XHCI_1_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 2);
+		break;
+	case PIC_2XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 3);
+		break;
+	default:
+		pr_err("No matching USB irq!\n");
+		return;
+	}
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void nlm_xlpii_usb_hw_reset(int node, int port)
+{
+	u64 port_addr, xhci_base, pci_base;
+	void __iomem *corebase;
+	u32 val;
+
+	port_addr = nlm_xlpii_get_usb_regbase(node, port);
+
+	/* Set frequency */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
+	val &= ~(0x3f << XLPII_FSEL);
+	val |= (0x27 << XLPII_FSEL);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
+
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
+	val |= (1 << XLPII_VVLD);
+	nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
+
+	/* PHY reset */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
+	val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
+		| XLPII_TESTPDSSP | XLPII_TESTBURNIN);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
+
+	/* Setup control register */
+	val =  XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
+		| (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
+		| XLPII_RETENABLEN | XLPII_XHCIREV;
+	nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
+
+	/* Enable interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
+
+	/* Clear all interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+
+	udelay(2000);
+
+	/* XHCI configuration at PCI mem */
+	pci_base = nlm_xlpii_get_usb_pcibase(node, port);
+	xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
+	corebase = ioremap(xhci_base, 0x10000);
+	if (!corebase)
+		return;
+
+	writel(0x240002, corebase + 0xc2c0);
+	/* GCTL 0xc110 */
+	val = readl(corebase + 0xc110);
+	val &= ~(0x3 << 12);
+	val |= (1 << 12);
+	writel(val, corebase + 0xc110);
+	udelay(100);
+
+	/* PHYCFG 0xc200 */
+	val = readl(corebase + 0xc200);
+	val &= ~(1 << 6);
+	writel(val, corebase + 0xc200);
+	udelay(100);
+
+	/* PIPECTL 0xc2c0 */
+	val = readl(corebase + 0xc2c0);
+	val &= ~(1 << 17);
+	writel(val, corebase + 0xc2c0);
+
+	iounmap(corebase);
+}
+
+static int __init nlm_platform_xlpii_usb_init(void)
+{
+	if (!cpu_is_xlpii())
+		return 0;
+
+	pr_info("Initializing 2XX USB Interface\n");
+	nlm_xlpii_usb_hw_reset(0, 1);
+	nlm_xlpii_usb_hw_reset(0, 2);
+	nlm_xlpii_usb_hw_reset(0, 3);
+	nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack);
+	nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack);
+	nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack);
+
+	return 0;
+}
+
+arch_initcall(nlm_platform_xlpii_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */
+static void nlm_usb_fixup_final(struct pci_dev *dev)
+{
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x21:
+		dev->irq = PIC_2XX_XHCI_0_IRQ;
+		break;
+	case 0x22:
+		dev->irq = PIC_2XX_XHCI_1_IRQ;
+		break;
+	case 0x23:
+		dev->irq = PIC_2XX_XHCI_2_IRQ;
+		break;
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
+		nlm_usb_fixup_final);

arch/mips/netlogic/xlp/usb-init.c

@@ -75,8 +75,7 @@ static void nlm_usb_intr_en(int node, int port)
 	port_addr = nlm_get_usb_regbase(node, port);
 	val = nlm_read_usb_reg(port_addr, USB_INT_EN);
 	val = USB_CTRL_INTERRUPT_EN  | USB_OHCI_INTERRUPT_EN |
-		USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN	|
-		USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
+		USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN;
 	nlm_write_usb_reg(port_addr, USB_INT_EN, val);
 }
 
@@ -100,6 +99,9 @@ static void nlm_usb_hw_reset(int node, int port)
 
 static int __init nlm_platform_usb_init(void)
 {
+	if (cpu_is_xlpii())
+		return 0;
+
 	pr_info("Initializing USB Interface\n");
 	nlm_usb_hw_reset(0, 0);
 	nlm_usb_hw_reset(0, 3);

arch/mips/netlogic/xlp/wakeup.c

@@ -58,10 +58,12 @@ static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
 
 	coremask = (1 << core);
 
-	/* Enable CPU clock */
+	/* Enable CPU clock in case of 8xx/3xx */
+	if (!cpu_is_xlpii()) {
 		value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
 		value &= ~coremask;
 		nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
+	}
 
 	/* Remove CPU Reset */
 	value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET);

arch/mips/pci/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o

arch/mips/pci/pci-octeon.c

@@ -586,15 +586,16 @@ static int __init octeon_pci_setup(void)
 	else
 		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG;
 
-	/* PCI I/O and PCI MEM values */
-	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1;
 	if (!octeon_is_pci_host()) {
 		pr_notice("Not in host mode, PCI Controller not initialized\n");
 		return 0;
 	}
 
+	/* PCI I/O and PCI MEM values */
+	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
+	ioport_resource.start = 0;
+	ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1;
+
 	pr_notice("%s Octeon big bar support\n",
 		  (octeon_dma_bar_type ==
 		  OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling");

arch/mips/pci/pci-rt3883.c

+/*
+ *  Ralink RT3662/RT3883 SoC PCI support
+ *
+ *  Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RT3883_MEMORY_BASE		0x00000000
+#define RT3883_MEMORY_SIZE		0x02000000
+
+#define RT3883_PCI_REG_PCICFG		0x00
+#define   RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf
+#define   RT3883_PCICFG_P2P_BR_DEVNUM_S 16
+#define   RT3883_PCICFG_PCIRST		BIT(1)
+#define RT3883_PCI_REG_PCIRAW		0x04
+#define RT3883_PCI_REG_PCIINT		0x08
+#define RT3883_PCI_REG_PCIENA		0x0c
+
+#define RT3883_PCI_REG_CFGADDR		0x20
+#define RT3883_PCI_REG_CFGDATA		0x24
+#define RT3883_PCI_REG_MEMBASE		0x28
+#define RT3883_PCI_REG_IOBASE		0x2c
+#define RT3883_PCI_REG_ARBCTL		0x80
+
+#define RT3883_PCI_REG_BASE(_x)		(0x1000 + (_x) * 0x1000)
+#define RT3883_PCI_REG_BAR0SETUP(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x10)
+#define RT3883_PCI_REG_IMBASEBAR0(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x18)
+#define RT3883_PCI_REG_ID(_x)		(RT3883_PCI_REG_BASE((_x)) + 0x30)
+#define RT3883_PCI_REG_CLASS(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x34)
+#define RT3883_PCI_REG_SUBID(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x38)
+#define RT3883_PCI_REG_STATUS(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x50)
+
+#define RT3883_PCI_MODE_NONE	0
+#define RT3883_PCI_MODE_PCI	BIT(0)
+#define RT3883_PCI_MODE_PCIE	BIT(1)
+#define RT3883_PCI_MODE_BOTH	(RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
+
+#define RT3883_PCI_IRQ_COUNT	32
+
+#define RT3883_P2P_BR_DEVNUM	1
+
+struct rt3883_pci_controller {
+	void __iomem *base;
+	spinlock_t lock;
+
+	struct device_node *intc_of_node;
+	struct irq_domain *irq_domain;
+
+	struct pci_controller pci_controller;
+	struct resource io_res;
+	struct resource mem_res;
+
+	bool pcie_ready;
+};
+
+static inline struct rt3883_pci_controller *
+pci_bus_to_rt3883_controller(struct pci_bus *bus)
+{
+	struct pci_controller *hose;
+
+	hose = (struct pci_controller *) bus->sysdata;
+	return container_of(hose, struct rt3883_pci_controller, pci_controller);
+}
+
+static inline u32 rt3883_pci_r32(struct rt3883_pci_controller *rpc,
+				 unsigned reg)
+{
+	return ioread32(rpc->base + reg);
+}
+
+static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc,
+				  u32 val, unsigned reg)
+{
+	iowrite32(val, rpc->base + reg);
+}
+
+static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+					 unsigned int func, unsigned int where)
+{
+	return (bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
+	       0x80000000;
+}
+
+static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
+			       unsigned bus, unsigned slot,
+			       unsigned func, unsigned reg)
+{
+	unsigned long flags;
+	u32 address;
+	u32 ret;
+
+	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+
+	return ret;
+}
+
+static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
+				 unsigned bus, unsigned slot,
+				 unsigned func, unsigned reg, u32 val)
+{
+	unsigned long flags;
+	u32 address;
+
+	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+}
+
+static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct rt3883_pci_controller *rpc;
+	u32 pending;
+
+	rpc = irq_get_handler_data(irq);
+
+	pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
+		  rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+
+	if (!pending) {
+		spurious_interrupt();
+		return;
+	}
+
+	while (pending) {
+		unsigned bit = __ffs(pending);
+
+		irq = irq_find_mapping(rpc->irq_domain, bit);
+		generic_handle_irq(irq);
+
+		pending &= ~BIT(bit);
+	}
+}
+
+static void rt3883_pci_irq_unmask(struct irq_data *d)
+{
+	struct rt3883_pci_controller *rpc;
+	u32 t;
+
+	rpc = irq_data_get_irq_chip_data(d);
+
+	t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+	rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+	/* flush write */
+	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static void rt3883_pci_irq_mask(struct irq_data *d)
+{
+	struct rt3883_pci_controller *rpc;
+	u32 t;
+
+	rpc = irq_data_get_irq_chip_data(d);
+
+	t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+	rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+	/* flush write */
+	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static struct irq_chip rt3883_pci_irq_chip = {
+	.name		= "RT3883 PCI",
+	.irq_mask	= rt3883_pci_irq_mask,
+	.irq_unmask	= rt3883_pci_irq_unmask,
+	.irq_mask_ack	= rt3883_pci_irq_mask,
+};
+
+static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, d->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops rt3883_pci_irq_domain_ops = {
+	.map = rt3883_pci_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int rt3883_pci_irq_init(struct device *dev,
+			       struct rt3883_pci_controller *rpc)
+{
+	int irq;
+
+	irq = irq_of_parse_and_map(rpc->intc_of_node, 0);
+	if (irq == 0) {
+		dev_err(dev, "%s has no IRQ",
+			of_node_full_name(rpc->intc_of_node));
+		return -EINVAL;
+	}
+
+	/* disable all interrupts */
+	rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
+
+	rpc->irq_domain =
+		irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
+				      &rt3883_pci_irq_domain_ops,
+				      rpc);
+	if (!rpc->irq_domain) {
+		dev_err(dev, "unable to add IRQ domain\n");
+		return -ENODEV;
+	}
+
+	irq_set_handler_data(irq, rpc);
+	irq_set_chained_handler(irq, rt3883_pci_irq_handler);
+
+	return 0;
+}
+
+static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *val)
+{
+	struct rt3883_pci_controller *rpc;
+	unsigned long flags;
+	u32 address;
+	u32 data;
+
+	rpc = pci_bus_to_rt3883_controller(bus);
+
+	if (!rpc->pcie_ready && bus->number == 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+					 PCI_FUNC(devfn), where);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+
+	switch (size) {
+	case 1:
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+		break;
+	case 4:
+		*val = data;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	struct rt3883_pci_controller *rpc;
+	unsigned long flags;
+	u32 address;
+	u32 data;
+
+	rpc = pci_bus_to_rt3883_controller(bus);
+
+	if (!rpc->pcie_ready && bus->number == 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+					 PCI_FUNC(devfn), where);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+
+	switch (size) {
+	case 1:
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		       (val << ((where & 3) << 3));
+		break;
+	case 2:
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		       (val << ((where & 3) << 3));
+		break;
+	case 4:
+		data = val;
+		break;
+	}
+
+	rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rt3883_pci_ops = {
+	.read	= rt3883_pci_config_read,
+	.write	= rt3883_pci_config_write,
+};
+
+static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode)
+{
+	u32 syscfg1;
+	u32 rstctrl;
+	u32 clkcfg1;
+	u32 t;
+
+	rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+	syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+	clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+
+	if (mode & RT3883_PCI_MODE_PCIE) {
+		rstctrl |= RT3883_RSTCTRL_PCIE;
+		rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+
+		/* setup PCI PAD drive mode */
+		syscfg1 &= ~(0x30);
+		syscfg1 |= (2 << 4);
+		rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+		t &= ~BIT(31);
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+		t &= 0x80ffffff;
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+		t |= 0xa << 24;
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+		t |= BIT(31);
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+		msleep(50);
+
+		rstctrl &= ~RT3883_RSTCTRL_PCIE;
+		rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+	}
+
+	syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE);
+
+	clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN);
+
+	if (mode & RT3883_PCI_MODE_PCI) {
+		clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
+		rstctrl &= ~RT3883_RSTCTRL_PCI;
+	}
+
+	if (mode & RT3883_PCI_MODE_PCIE) {
+		clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
+		rstctrl &= ~RT3883_RSTCTRL_PCIE;
+	}
+
+	rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+	rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+	rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
+
+	msleep(500);
+
+	/*
+	 * setup the device number of the P2P bridge
+	 * and de-assert the reset line
+	 */
+	t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S);
+	rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG);
+
+	/* flush write */
+	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG);
+	msleep(500);
+
+	if (mode & RT3883_PCI_MODE_PCIE) {
+		msleep(500);
+
+		t = rt3883_pci_r32(rpc, RT3883_PCI_REG_STATUS(1));
+
+		rpc->pcie_ready = t & BIT(0);
+
+		if (!rpc->pcie_ready) {
+			/* reset the PCIe block */
+			t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+			t |= RT3883_RSTCTRL_PCIE;
+			rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+			t &= ~RT3883_RSTCTRL_PCIE;
+			rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+
+			/* turn off PCIe clock */
+			t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+			t &= ~RT3883_CLKCFG1_PCIE_CLK_EN;
+			rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
+
+			t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+			t &= ~0xf000c080;
+			rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+		}
+	}
+
+	/* enable PCI arbiter */
+	rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL);
+}
+
+static int rt3883_pci_probe(struct platform_device *pdev)
+{
+	struct rt3883_pci_controller *rpc;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	struct device_node *child;
+	u32 val;
+	int err;
+	int mode;
+
+	rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
+	if (!rpc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	rpc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rpc->base))
+		return PTR_ERR(rpc->base);
+
+	/* find the interrupt controller child node */
+	for_each_child_of_node(np, child) {
+		if (of_get_property(child, "interrupt-controller", NULL) &&
+		    of_node_get(child)) {
+			rpc->intc_of_node = child;
+			break;
+		}
+	}
+
+	if (!rpc->intc_of_node) {
+		dev_err(dev, "%s has no %s child node",
+			of_node_full_name(rpc->intc_of_node),
+			"interrupt controller");
+		return -EINVAL;
+	}
+
+	/* find the PCI host bridge child node */
+	for_each_child_of_node(np, child) {
+		if (child->type &&
+		    of_node_cmp(child->type, "pci") == 0 &&
+		    of_node_get(child)) {
+			rpc->pci_controller.of_node = child;
+			break;
+		}
+	}
+
+	if (!rpc->pci_controller.of_node) {
+		dev_err(dev, "%s has no %s child node",
+			of_node_full_name(rpc->intc_of_node),
+			"PCI host bridge");
+		err = -EINVAL;
+		goto err_put_intc_node;
+	}
+
+	mode = RT3883_PCI_MODE_NONE;
+	for_each_available_child_of_node(rpc->pci_controller.of_node, child) {
+		int devfn;
+
+		if (!child->type ||
+		    of_node_cmp(child->type, "pci") != 0)
+			continue;
+
+		devfn = of_pci_get_devfn(child);
+		if (devfn < 0)
+			continue;
+
+		switch (PCI_SLOT(devfn)) {
+		case 1:
+			mode |= RT3883_PCI_MODE_PCIE;
+			break;
+
+		case 17:
+		case 18:
+			mode |= RT3883_PCI_MODE_PCI;
+			break;
+		}
+	}
+
+	if (mode == RT3883_PCI_MODE_NONE) {
+		dev_err(dev, "unable to determine PCI mode\n");
+		err = -EINVAL;
+		goto err_put_hb_node;
+	}
+
+	dev_info(dev, "mode:%s%s\n",
+		 (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "",
+		 (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : "");
+
+	rt3883_pci_preinit(rpc, mode);
+
+	rpc->pci_controller.pci_ops = &rt3883_pci_ops;
+	rpc->pci_controller.io_resource = &rpc->io_res;
+	rpc->pci_controller.mem_resource = &rpc->mem_res;
+
+	/* Load PCI I/O and memory resources from DT */
+	pci_load_of_ranges(&rpc->pci_controller,
+			   rpc->pci_controller.of_node);
+
+	rt3883_pci_w32(rpc, rpc->mem_res.start, RT3883_PCI_REG_MEMBASE);
+	rt3883_pci_w32(rpc, rpc->io_res.start, RT3883_PCI_REG_IOBASE);
+
+	ioport_resource.start = rpc->io_res.start;
+	ioport_resource.end = rpc->io_res.end;
+
+	/* PCI */
+	rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0));
+	rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0));
+	rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0));
+	rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0));
+	rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0));
+
+	/* PCIe */
+	rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1));
+	rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1));
+	rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1));
+	rt3883_pci_w32(rpc, 0x06040001, RT3883_PCI_REG_CLASS(1));
+	rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(1));
+
+	err = rt3883_pci_irq_init(dev, rpc);
+	if (err)
+		goto err_put_hb_node;
+
+	/* PCIe */
+	val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND);
+	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val);
+
+	/* PCI */
+	val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND);
+	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val);
+
+	if (mode == RT3883_PCI_MODE_PCIE) {
+		rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(0));
+		rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(1));
+
+		rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+				       PCI_BASE_ADDRESS_0,
+				       RT3883_MEMORY_BASE);
+		/* flush write */
+		rt3883_pci_read_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+				      PCI_BASE_ADDRESS_0);
+	} else {
+		rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+				       PCI_IO_BASE, 0x00000101);
+	}
+
+	register_pci_controller(&rpc->pci_controller);
+
+	return 0;
+
+err_put_hb_node:
+	of_node_put(rpc->pci_controller.of_node);
+err_put_intc_node:
+	of_node_put(rpc->intc_of_node);
+	return err;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct of_irq dev_irq;
+	int err;
+	int irq;
+
+	err = of_irq_map_pci(dev, &dev_irq);
+	if (err) {
+		pr_err("pci %s: unable to get irq map, err=%d\n",
+		       pci_name((struct pci_dev *) dev), err);
+		return 0;
+	}
+
+	irq = irq_create_of_mapping(dev_irq.controller,
+				    dev_irq.specifier,
+				    dev_irq.size);
+
+	if (irq == 0)
+		pr_crit("pci %s: no irq found for pin %u\n",
+			pci_name((struct pci_dev *) dev), pin);
+	else
+		pr_info("pci %s: using irq %d for pin %u\n",
+			pci_name((struct pci_dev *) dev), irq, pin);
+
+	return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static const struct of_device_id rt3883_pci_ids[] = {
+	{ .compatible = "ralink,rt3883-pci" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
+
+static struct platform_driver rt3883_pci_driver = {
+	.probe = rt3883_pci_probe,
+	.driver = {
+		.name = "rt3883-pci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(rt3883_pci_ids),
+	},
+};
+
+static int __init rt3883_pci_init(void)
+{
+	return platform_driver_register(&rt3883_pci_driver);
+}
+
+postcore_initcall(rt3883_pci_init);

arch/mips/powertv/Kconfig

-config BOOTLOADER_DRIVER
-	bool "PowerTV Bootloader Driver Support"
-	default n
-	depends on POWERTV
-	help
-	  Use this option if you want to load bootloader driver.
-
 config BOOTLOADER_FAMILY
 	string "POWERTV Bootloader Family string"
 	default "85"
-	depends on POWERTV && !BOOTLOADER_DRIVER
+	depends on POWERTV
 	help
 	  This value should be specified when the bootloader driver is disabled
 	  and must be exactly two characters long. Families supported are:

arch/mips/powertv/asic/asic_devices.c

@@ -147,20 +147,10 @@ static __init noinline void platform_set_family(void)
 	if (check_forcefamily(forced_family) == 0)
 		bootldr_family = BOOTLDRFAMILY(forced_family[0],
 			forced_family[1]);
-	else {
-
-#ifdef CONFIG_BOOTLOADER_DRIVER
-		bootldr_family = (unsigned short) kbldr_GetSWFamily();
-#else
-#if defined(CONFIG_BOOTLOADER_FAMILY)
+	else
 		bootldr_family = (unsigned short) BOOTLDRFAMILY(
 			CONFIG_BOOTLOADER_FAMILY[0],
 			CONFIG_BOOTLOADER_FAMILY[1]);
-#else
-#error "Unknown Bootloader Family"
-#endif
-#endif
-	}
 
 	pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
 

arch/mips/powertv/init.c

@@ -87,8 +87,4 @@ void __init prom_init(void)
 
 	configure_platform();
 	prom_meminit();
-
-#ifndef CONFIG_BOOTLOADER_DRIVER
-	pr_info("\nBootloader driver isn't loaded...\n");
-#endif
 }

arch/mips/powertv/reset.c

@@ -21,24 +21,12 @@
 #include <linux/io.h>
 #include <asm/reboot.h>			/* Not included by linux/reboot.h */
 
-#ifdef CONFIG_BOOTLOADER_DRIVER
-#include <asm/mach-powertv/kbldr.h>
-#endif
-
 #include <asm/mach-powertv/asic_regs.h>
 #include "reset.h"
 
 static void mips_machine_restart(char *command)
 {
-#ifdef CONFIG_BOOTLOADER_DRIVER
-	/*
-	 * Call the bootloader's reset function to ensure
-	 * that persistent data is flushed before hard reset
-	 */
-	kbldr_SetCauseAndReset();
-#else
 	writel(0x1, asic_reg_addr(watchdog));
-#endif
 }
 
 void mips_reboot_setup(void)

arch/mips/ralink/Kconfig

 if RALINK
 
+config CLKEVT_RT3352
+	bool
+	depends on SOC_RT305X || SOC_MT7620
+	default y
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+
 choice
 	prompt "Ralink SoC selection"
 	default SOC_RT305X
@@ -19,9 +26,12 @@ choice
 		bool "RT3883"
 		select USB_ARCH_HAS_OHCI
 		select USB_ARCH_HAS_EHCI
+		select HW_HAS_PCI
 
 	config SOC_MT7620
 		bool "MT7620"
+		select USB_ARCH_HAS_OHCI
+		select USB_ARCH_HAS_EHCI
 
 endchoice
 

arch/mips/ralink/Makefile

@@ -6,7 +6,9 @@
 # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
 # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
 
-obj-y := prom.o of.o reset.o clk.o irq.o
+obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+
+obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
 
 obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o

arch/mips/ralink/Platform

@@ -26,3 +26,4 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
 # Ralink MT7620
 #
 load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620

arch/mips/ralink/cevt-rt3352.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSTICK_FREQ		(50 * 1000)
+
+#define SYSTICK_CONFIG		0x00
+#define SYSTICK_COMPARE		0x04
+#define SYSTICK_COUNT		0x08
+
+/* route systick irq to mips irq 7 instead of the r4k-timer */
+#define CFG_EXT_STK_EN		0x2
+/* enable the counter */
+#define CFG_CNT_EN		0x1
+
+struct systick_device {
+	void __iomem *membase;
+	struct clock_event_device dev;
+	int irq_requested;
+	int freq_scale;
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt);
+
+static int systick_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+	u32 count;
+
+	sdev = container_of(evt, struct systick_device, dev);
+	count = ioread32(sdev->membase + SYSTICK_COUNT);
+	count = (count + delta) % SYSTICK_FREQ;
+	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+
+	return 0;
+}
+
+static void systick_event_handler(struct clock_event_device *dev)
+{
+	/* noting to do here */
+}
+
+static irqreturn_t systick_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
+
+	dev->event_handler(dev);
+
+	return IRQ_HANDLED;
+}
+
+static struct systick_device systick = {
+	.dev = {
+		/*
+		 * cevt-r4k uses 300, make sure systick
+		 * gets used if available
+		 */
+		.rating		= 310,
+		.features	= CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event	= systick_next_event,
+		.set_mode	= systick_set_clock_mode,
+		.event_handler	= systick_event_handler,
+	},
+};
+
+static struct irqaction systick_irqaction = {
+	.handler = systick_interrupt,
+	.flags = IRQF_PERCPU | IRQF_TIMER,
+	.dev_id = &systick.dev,
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		if (!sdev->irq_requested)
+			setup_irq(systick.dev.irq, &systick_irqaction);
+		sdev->irq_requested = 1;
+		iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+				systick.membase + SYSTICK_CONFIG);
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		if (sdev->irq_requested)
+			free_irq(systick.dev.irq, &systick_irqaction);
+		sdev->irq_requested = 0;
+		iowrite32(0, systick.membase + SYSTICK_CONFIG);
+		break;
+
+	default:
+		pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
+		break;
+	}
+}
+
+static void __init ralink_systick_init(struct device_node *np)
+{
+	systick.membase = of_iomap(np, 0);
+	if (!systick.membase)
+		return;
+
+	systick_irqaction.name = np->name;
+	systick.dev.name = np->name;
+	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+	systick.dev.irq = irq_of_parse_and_map(np, 0);
+	if (!systick.dev.irq) {
+		pr_err("%s: request_irq failed", np->name);
+		return;
+	}
+
+	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+			SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
+
+	clockevents_register_device(&systick.dev);
+
+	pr_info("%s: runing - mult: %d, shift: %d\n",
+			np->name, systick.dev.mult, systick.dev.shift);
+}
+
+CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);

arch/mips/ralink/clk.c

@@ -69,4 +69,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
+	clocksource_of_init();
 }

arch/mips/ralink/common.h

@@ -46,6 +46,8 @@ extern void ralink_of_remap(void);
 extern void ralink_clk_init(void);
 extern void ralink_clk_add(const char *dev, unsigned long rate);
 
+extern void ralink_rst_init(void);
+
 extern void prom_soc_init(struct ralink_soc_info *soc_info);
 
 __iomem void *plat_of_remap_node(const char *node);

arch/mips/ralink/mt7620.c

@@ -23,9 +23,6 @@
 /* does the board have sdram or ddram */
 static int dram_type;
 
-/* the pll dividers */
-static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
-
 static struct ralink_pinmux_grp mode_mux[] = {
 	{
 		.name = "i2c",
@@ -140,34 +137,189 @@ struct ralink_pinmux rt_gpio_pinmux = {
 	.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
 };
 
-void __init ralink_clk_init(void)
+static __init u32
+mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
-	unsigned long cpu_rate, sys_rate;
-	u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
-	u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
-	u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
-	u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
-
-	if (cpu_clk) {
-		cpu_rate = 480000000;
-	} else if (!swconfig) {
-		cpu_rate = 600000000;
-	} else {
-		u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
-		u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
+	u64 t;
 
-		cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
-	}
+	t = ref_rate;
+	t *= mul;
+	do_div(t, div);
+
+	return t;
+}
+
+#define MHZ(x)		((x) * 1000 * 1000)
+
+static __init unsigned long
+mt7620_get_xtal_rate(void)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+	if (reg & SYSCFG0_XTAL_FREQ_SEL)
+		return MHZ(40);
+
+	return MHZ(20);
+}
+
+static __init unsigned long
+mt7620_get_periph_rate(unsigned long xtal_rate)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
+	if (reg & CLKCFG0_PERI_CLK_SEL)
+		return xtal_rate;
+
+	return MHZ(40);
+}
+
+static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
+
+static __init unsigned long
+mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
+{
+	u32 reg;
+	u32 mul;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+	if (reg & CPLL_CFG0_BYPASS_REF_CLK)
+		return xtal_rate;
+
+	if ((reg & CPLL_CFG0_SW_CFG) == 0)
+		return MHZ(600);
+
+	mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
+	      CPLL_CFG0_PLL_MULT_RATIO_MASK;
+	mul += 24;
+	if (reg & CPLL_CFG0_LC_CURFCK)
+		mul *= 2;
+
+	div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
+	      CPLL_CFG0_PLL_DIV_RATIO_MASK;
+
+	WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
+
+	return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
+}
+
+static __init unsigned long
+mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+	if (reg & CPLL_CFG1_CPU_AUX1)
+		return xtal_rate;
+
+	if (reg & CPLL_CFG1_CPU_AUX0)
+		return MHZ(480);
 
+	return cpu_pll_rate;
+}
+
+static __init unsigned long
+mt7620_get_cpu_rate(unsigned long pll_rate)
+{
+	u32 reg;
+	u32 mul;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+	mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
+	div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
+	      CPU_SYS_CLKCFG_CPU_FDIV_MASK;
+
+	return mt7620_calc_rate(pll_rate, mul, div);
+}
+
+static const u32 mt7620_ocp_dividers[16] __initconst = {
+	[CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
+	[CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
+	[CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
+	[CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
+	[CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
+};
+
+static __init unsigned long
+mt7620_get_dram_rate(unsigned long pll_rate)
+{
 	if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
-		sys_rate = cpu_rate / 4;
-	else
-		sys_rate = cpu_rate / 3;
+		return pll_rate / 4;
+
+	return pll_rate / 3;
+}
+
+static __init unsigned long
+mt7620_get_sys_rate(unsigned long cpu_rate)
+{
+	u32 reg;
+	u32 ocp_ratio;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+	ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
+		    CPU_SYS_CLKCFG_OCP_RATIO_MASK;
+
+	if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
+		return cpu_rate;
+
+	div = mt7620_ocp_dividers[ocp_ratio];
+	if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
+		return cpu_rate;
+
+	return cpu_rate / div;
+}
+
+void __init ralink_clk_init(void)
+{
+	unsigned long xtal_rate;
+	unsigned long cpu_pll_rate;
+	unsigned long pll_rate;
+	unsigned long cpu_rate;
+	unsigned long sys_rate;
+	unsigned long dram_rate;
+	unsigned long periph_rate;
+
+	xtal_rate = mt7620_get_xtal_rate();
+
+	cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+	pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+
+	cpu_rate = mt7620_get_cpu_rate(pll_rate);
+	dram_rate = mt7620_get_dram_rate(pll_rate);
+	sys_rate = mt7620_get_sys_rate(cpu_rate);
+	periph_rate = mt7620_get_periph_rate(xtal_rate);
+
+#define RFMT(label)	label ":%lu.%03luMHz "
+#define RINT(x)		((x) / 1000000)
+#define RFRAC(x)	(((x) / 1000) % 1000)
+
+	pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+		 RINT(xtal_rate), RFRAC(xtal_rate),
+		 RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+		 RINT(pll_rate), RFRAC(pll_rate));
+
+	pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
+		 RINT(cpu_rate), RFRAC(cpu_rate),
+		 RINT(dram_rate), RFRAC(dram_rate),
+		 RINT(sys_rate), RFRAC(sys_rate),
+		 RINT(periph_rate), RFRAC(periph_rate));
+
+#undef RFRAC
+#undef RINT
+#undef RFMT
 
 	ralink_clk_add("cpu", cpu_rate);
-	ralink_clk_add("10000100.timer", 40000000);
-	ralink_clk_add("10000500.uart", 40000000);
-	ralink_clk_add("10000c00.uartlite", 40000000);
+	ralink_clk_add("10000100.timer", periph_rate);
+	ralink_clk_add("10000120.watchdog", periph_rate);
+	ralink_clk_add("10000500.uart", periph_rate);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000c00.uartlite", periph_rate);
 }
 
 void __init ralink_of_remap(void)
@@ -214,16 +366,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	switch (dram_type) {
 	case SYSCFG0_DRAM_TYPE_SDRAM:
+		pr_info("Board has SDRAM\n");
 		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
 		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
 		break;
 
 	case SYSCFG0_DRAM_TYPE_DDR1:
+		pr_info("Board has DDR1\n");
 		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
 		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
 		break;
 
 	case SYSCFG0_DRAM_TYPE_DDR2:
+		pr_info("Board has DDR2\n");
 		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
 		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
 		break;

arch/mips/ralink/of.c

@@ -110,6 +110,9 @@ static int __init plat_of_setup(void)
 	if (of_platform_populate(NULL, of_ids, NULL, NULL))
 		panic("failed to populate DT\n");
 
+	/* make sure ithat the reset controller is setup early */
+	ralink_rst_init();
+
 	return 0;
 }
 

arch/mips/ralink/reset.c

@@ -10,6 +10,8 @@
 
 #include <linux/pm.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
 
@@ -19,6 +21,66 @@
 #define SYSC_REG_RESET_CTRL     0x034
 #define RSTCTL_RESET_SYSTEM     BIT(0)
 
+static int ralink_assert_device(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	u32 val;
+
+	if (id < 8)
+		return -1;
+
+	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+	val |= BIT(id);
+	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+	return 0;
+}
+
+static int ralink_deassert_device(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	u32 val;
+
+	if (id < 8)
+		return -1;
+
+	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+	val &= ~BIT(id);
+	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+	return 0;
+}
+
+static int ralink_reset_device(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	ralink_assert_device(rcdev, id);
+	return ralink_deassert_device(rcdev, id);
+}
+
+static struct reset_control_ops reset_ops = {
+	.reset = ralink_reset_device,
+	.assert = ralink_assert_device,
+	.deassert = ralink_deassert_device,
+};
+
+static struct reset_controller_dev reset_dev = {
+	.ops			= &reset_ops,
+	.owner			= THIS_MODULE,
+	.nr_resets		= 32,
+	.of_reset_n_cells	= 1,
+};
+
+void ralink_rst_init(void)
+{
+	reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+						"ralink,rt2880-reset");
+	if (!reset_dev.of_node)
+		pr_err("Failed to find reset controller node");
+	else
+		reset_controller_register(&reset_dev);
+}
+
 static void ralink_restart(char *command)
 {
 	local_irq_disable();

arch/mips/ralink/timer.c

+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define TIMER_REG_TMRSTAT		0x00
+#define TIMER_REG_TMR0LOAD		0x10
+#define TIMER_REG_TMR0CTL		0x18
+
+#define TMRSTAT_TMR0INT			BIT(0)
+
+#define TMR0CTL_ENABLE			BIT(7)
+#define TMR0CTL_MODE_PERIODIC		BIT(4)
+#define TMR0CTL_PRESCALER		1
+#define TMR0CTL_PRESCALE_VAL		(0xf - TMR0CTL_PRESCALER)
+#define TMR0CTL_PRESCALE_DIV		(65536 / BIT(TMR0CTL_PRESCALER))
+
+struct rt_timer {
+	struct device	*dev;
+	void __iomem	*membase;
+	int		irq;
+	unsigned long	timer_freq;
+	unsigned long	timer_div;
+};
+
+static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
+{
+	__raw_writel(val, rt->membase + reg);
+}
+
+static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+{
+	return __raw_readl(rt->membase + reg);
+}
+
+static irqreturn_t rt_timer_irq(int irq, void *_rt)
+{
+	struct rt_timer *rt =  (struct rt_timer *) _rt;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+	rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
+
+	return IRQ_HANDLED;
+}
+
+
+static int rt_timer_request(struct rt_timer *rt)
+{
+	int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
+						dev_name(rt->dev), rt);
+	if (err) {
+		dev_err(rt->dev, "failed to request irq\n");
+	} else {
+		u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
+		rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+	}
+	return err;
+}
+
+static void rt_timer_free(struct rt_timer *rt)
+{
+	free_irq(rt->irq, rt);
+}
+
+static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+{
+	if (rt->timer_freq < divisor)
+		rt->timer_div = rt->timer_freq;
+	else
+		rt->timer_div = divisor;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+	return 0;
+}
+
+static int rt_timer_enable(struct rt_timer *rt)
+{
+	u32 t;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+	t |= TMR0CTL_ENABLE;
+	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+
+	return 0;
+}
+
+static void rt_timer_disable(struct rt_timer *rt)
+{
+	u32 t;
+
+	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+	t &= ~TMR0CTL_ENABLE;
+	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+}
+
+static int rt_timer_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct rt_timer *rt;
+	struct clk *clk;
+
+	rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
+	if (!rt) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	rt->irq = platform_get_irq(pdev, 0);
+	if (!rt->irq) {
+		dev_err(&pdev->dev, "failed to load irq\n");
+		return -ENOENT;
+	}
+
+	rt->membase = devm_request_and_ioremap(&pdev->dev, res);
+	if (IS_ERR(rt->membase))
+		return PTR_ERR(rt->membase);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed get clock rate\n");
+		return PTR_ERR(clk);
+	}
+
+	rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
+	if (!rt->timer_freq)
+		return -EINVAL;
+
+	rt->dev = &pdev->dev;
+	platform_set_drvdata(pdev, rt);
+
+	rt_timer_request(rt);
+	rt_timer_config(rt, 2);
+	rt_timer_enable(rt);
+
+	dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
+
+	return 0;
+}
+
+static int rt_timer_remove(struct platform_device *pdev)
+{
+	struct rt_timer *rt = platform_get_drvdata(pdev);
+
+	rt_timer_disable(rt);
+	rt_timer_free(rt);
+
+	return 0;
+}
+
+static const struct of_device_id rt_timer_match[] = {
+	{ .compatible = "ralink,rt2880-timer" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt_timer_match);
+
+static struct platform_driver rt_timer_driver = {
+	.probe = rt_timer_probe,
+	.remove = rt_timer_remove,
+	.driver = {
+		.name		= "rt-timer",
+		.owner          = THIS_MODULE,
+		.of_match_table	= rt_timer_match
+	},
+};
+
+module_platform_driver(rt_timer_driver);
+
+MODULE_DESCRIPTION("Ralink RT2880 timer");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL");

arch/mips/txx9/generic/setup.c

@@ -350,7 +350,7 @@ static void __init select_board(void)
 	}
 
 	/* select "default" board */
-#ifdef CONFIG_CPU_TX39XX
+#ifdef CONFIG_TOSHIBA_JMR3927
 	txx9_board_vec = &jmr3927_vec;
 #endif
 #ifdef CONFIG_CPU_TX49XX

drivers/gpio/Kconfig

@@ -203,6 +203,14 @@ config GPIO_MXS
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
+config GPIO_OCTEON
+	tristate "Cavium OCTEON GPIO"
+	depends on GPIOLIB && CAVIUM_OCTEON_SOC
+	default y
+	help
+	  Say yes here to support the on-chip GPIO lines on the OCTEON
+	  family of SOCs.
+
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
 	depends on ARM && ARM_AMBA

drivers/gpio/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
 obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
+obj-$(CONFIG_GPIO_OCTEON)	+= gpio-octeon.o
 obj-$(CONFIG_ARCH_OMAP)		+= gpio-omap.o
 obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o

drivers/gpio/gpio-octeon.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-gpio-defs.h>
+
+#define RX_DAT 0x80
+#define TX_SET 0x88
+#define TX_CLEAR 0x90
+/*
+ * The address offset of the GPIO configuration register for a given
+ * line.
+ */
+static unsigned int bit_cfg_reg(unsigned int offset)
+{
+	/*
+	 * The register stride is 8, with a discontinuity after the
+	 * first 16.
+	 */
+	if (offset < 16)
+		return 8 * offset;
+	else
+		return 8 * (offset - 16) + 0x100;
+}
+
+struct octeon_gpio {
+	struct gpio_chip chip;
+	u64 register_base;
+};
+
+static int octeon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
+
+	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), 0);
+	return 0;
+}
+
+static void octeon_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
+	u64 mask = 1ull << offset;
+	u64 reg = gpio->register_base + (value ? TX_SET : TX_CLEAR);
+	cvmx_write_csr(reg, mask);
+}
+
+static int octeon_gpio_dir_out(struct gpio_chip *chip, unsigned offset,
+			       int value)
+{
+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
+	union cvmx_gpio_bit_cfgx cfgx;
+
+	octeon_gpio_set(chip, offset, value);
+
+	cfgx.u64 = 0;
+	cfgx.s.tx_oe = 1;
+
+	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), cfgx.u64);
+	return 0;
+}
+
+static int octeon_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
+	u64 read_bits = cvmx_read_csr(gpio->register_base + RX_DAT);
+
+	return ((1ull << offset) & read_bits) != 0;
+}
+
+static int octeon_gpio_probe(struct platform_device *pdev)
+{
+	struct octeon_gpio *gpio;
+	struct gpio_chip *chip;
+	struct resource *res_mem;
+	int err = 0;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+	chip = &gpio->chip;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem == NULL) {
+		dev_err(&pdev->dev, "found no memory resource\n");
+		err = -ENXIO;
+		goto out;
+	}
+	if (!devm_request_mem_region(&pdev->dev, res_mem->start,
+					resource_size(res_mem),
+				     res_mem->name)) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		err = -ENXIO;
+		goto out;
+	}
+	gpio->register_base = (u64)devm_ioremap(&pdev->dev, res_mem->start,
+						resource_size(res_mem));
+
+	pdev->dev.platform_data = chip;
+	chip->label = "octeon-gpio";
+	chip->dev = &pdev->dev;
+	chip->owner = THIS_MODULE;
+	chip->base = 0;
+	chip->can_sleep = 0;
+	chip->ngpio = 20;
+	chip->direction_input = octeon_gpio_dir_in;
+	chip->get = octeon_gpio_get;
+	chip->direction_output = octeon_gpio_dir_out;
+	chip->set = octeon_gpio_set;
+	err = gpiochip_add(chip);
+	if (err)
+		goto out;
+
+	dev_info(&pdev->dev, "OCTEON GPIO driver probed.\n");
+out:
+	return err;
+}
+
+static int octeon_gpio_remove(struct platform_device *pdev)
+{
+	struct gpio_chip *chip = pdev->dev.platform_data;
+	return gpiochip_remove(chip);
+}
+
+static struct of_device_id octeon_gpio_match[] = {
+	{
+		.compatible = "cavium,octeon-3860-gpio",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_gpio_match);
+
+static struct platform_driver octeon_gpio_driver = {
+	.driver = {
+		.name		= "octeon_gpio",
+		.owner		= THIS_MODULE,
+		.of_match_table = octeon_gpio_match,
+	},
+	.probe		= octeon_gpio_probe,
+	.remove		= octeon_gpio_remove,
+};
+
+module_platform_driver(octeon_gpio_driver);
+
+MODULE_DESCRIPTION("Cavium Inc. OCTEON GPIO Driver");
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");

scripts/package/buildtar

@@ -87,6 +87,27 @@ case "${ARCH}" in
 		[ -f "${objtree}/vmlinux.SYS" ] && cp -v -- "${objtree}/vmlinux.SYS" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}.SYS"
 		[ -f "${objtree}/vmlinux.dsk" ] && cp -v -- "${objtree}/vmlinux.dsk" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}.dsk"
 		;;
+	mips)
+		if [ -f "${objtree}/arch/mips/boot/compressed/vmlinux.bin" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/compressed/vmlinux.bin" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/compressed/vmlinux.ecoff" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/compressed/vmlinux.ecoff" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/compressed/vmlinux.srec" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/compressed/vmlinux.srec" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		elif [ -f "${objtree}/vmlinux.32" ]; then
+			cp -v -- "${objtree}/vmlinux.32" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/vmlinux.64" ]; then
+			cp -v -- "${objtree}/vmlinux.64" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/vmlinux.bin" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/vmlinux.bin" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/vmlinux.ecoff" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/vmlinux.ecoff" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/vmlinux.srec" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/vmlinux.srec" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/vmlinux" ]; then
+			cp -v -- "${objtree}/vmlinux" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		fi
+		;;
 	*)
 		[ -f "${KBUILD_IMAGE}" ] && cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-kbuild-${KERNELRELEASE}"
 		echo "" >&2