net: stmmac: enable platform specific safety features

On Intel platforms, not all safety features are enabled on the hardware.
The current implementation enable all safety features by default. This
will cause mass error and warning printouts after the module is loaded.

Introduce platform specific safety features flag to enable or disable
each safety features.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c

@@ -568,6 +568,16 @@ static int ehl_common_data(struct pci_dev *pdev,
 	plat->tx_queues_to_use = 8;
 	plat->clk_ptp_rate = 200000000;
 
+	plat->safety_feat_cfg->tsoee = 1;
+	plat->safety_feat_cfg->mrxpee = 1;
+	plat->safety_feat_cfg->mestee = 1;
+	plat->safety_feat_cfg->mrxee = 1;
+	plat->safety_feat_cfg->mtxee = 1;
+	plat->safety_feat_cfg->epsi = 0;
+	plat->safety_feat_cfg->edpp = 0;
+	plat->safety_feat_cfg->prtyen = 0;
+	plat->safety_feat_cfg->tmouten = 0;
+
 	return intel_mgbe_common_data(pdev, plat);
 }
 
@@ -683,6 +693,16 @@ static int tgl_common_data(struct pci_dev *pdev,
 	plat->tx_queues_to_use = 4;
 	plat->clk_ptp_rate = 200000000;
 
+	plat->safety_feat_cfg->tsoee = 1;
+	plat->safety_feat_cfg->mrxpee = 0;
+	plat->safety_feat_cfg->mestee = 1;
+	plat->safety_feat_cfg->mrxee = 1;
+	plat->safety_feat_cfg->mtxee = 1;
+	plat->safety_feat_cfg->epsi = 0;
+	plat->safety_feat_cfg->edpp = 0;
+	plat->safety_feat_cfg->prtyen = 0;
+	plat->safety_feat_cfg->tmouten = 0;
+
 	return intel_mgbe_common_data(pdev, plat);
 }
 
@@ -959,6 +979,12 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	if (!plat->dma_cfg)
 		return -ENOMEM;
 
+	plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
+					     sizeof(*plat->safety_feat_cfg),
+					     GFP_KERNEL);
+	if (!plat->safety_feat_cfg)
+		return -ENOMEM;
+
 	/* Enable pci device */
 	ret = pcim_enable_device(pdev);
 	if (ret) {

drivers/net/ethernet/stmicro/stmmac/dwmac5.c

@@ -183,7 +183,8 @@ static void dwmac5_handle_dma_err(struct net_device *ndev,
 			STAT_OFF(dma_errors), stats);
 }
 
-int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp)
+int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp,
+			      struct stmmac_safety_feature_cfg *safety_feat_cfg)
 {
 	u32 value;
 
@@ -193,10 +194,15 @@ int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp)
 	/* 1. Enable Safety Features */
 	value = readl(ioaddr + MTL_ECC_CONTROL);
 	value |= MEEAO; /* MTL ECC Error Addr Status Override */
+	if (safety_feat_cfg->tsoee)
 		value |= TSOEE; /* TSO ECC */
+	if (safety_feat_cfg->mrxpee)
 		value |= MRXPEE; /* MTL RX Parser ECC */
+	if (safety_feat_cfg->mestee)
 		value |= MESTEE; /* MTL EST ECC */
+	if (safety_feat_cfg->mrxee)
 		value |= MRXEE; /* MTL RX FIFO ECC */
+	if (safety_feat_cfg->mtxee)
 		value |= MTXEE; /* MTL TX FIFO ECC */
 	writel(value, ioaddr + MTL_ECC_CONTROL);
 
@@ -219,12 +225,15 @@ int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp)
 
 	/* 5. Enable Parity and Timeout for FSM */
 	value = readl(ioaddr + MAC_FSM_CONTROL);
+	if (safety_feat_cfg->prtyen)
 		value |= PRTYEN; /* FSM Parity Feature */
+	if (safety_feat_cfg->tmouten)
 		value |= TMOUTEN; /* FSM Timeout Feature */
 	writel(value, ioaddr + MAC_FSM_CONTROL);
 
 	/* 4. Enable Data Parity Protection */
 	value = readl(ioaddr + MTL_DPP_CONTROL);
+	if (safety_feat_cfg->edpp)
 		value |= EDPP;
 	writel(value, ioaddr + MTL_DPP_CONTROL);
 
@@ -235,6 +244,7 @@ int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp)
 	if (asp <= 0x2)
 		return 0;
 
+	if (safety_feat_cfg->epsi)
 		value |= EPSI;
 	writel(value, ioaddr + MTL_DPP_CONTROL);
 	return 0;

drivers/net/ethernet/stmicro/stmmac/dwmac5.h

@@ -137,7 +137,8 @@
 
 #define GMAC_INT_FPE_EN			BIT(17)
 
-int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp);
+int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp,
+			      struct stmmac_safety_feature_cfg *safety_cfg);
 int dwmac5_safety_feat_irq_status(struct net_device *ndev,
 		void __iomem *ioaddr, unsigned int asp,
 		struct stmmac_safety_stats *stats);

drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c

@@ -801,7 +801,9 @@ static void dwxgmac3_handle_dma_err(struct net_device *ndev,
 			   dwxgmac3_dma_errors, STAT_OFF(dma_errors), stats);
 }
 
-static int dwxgmac3_safety_feat_config(void __iomem *ioaddr, unsigned int asp)
+static int
+dwxgmac3_safety_feat_config(void __iomem *ioaddr, unsigned int asp,
+			    struct stmmac_safety_feature_cfg *safety_cfg)
 {
 	u32 value;
 

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -348,7 +348,8 @@ struct stmmac_ops {
 	void (*pcs_rane)(void __iomem *ioaddr, bool restart);
 	void (*pcs_get_adv_lp)(void __iomem *ioaddr, struct rgmii_adv *adv);
 	/* Safety Features */
-	int (*safety_feat_config)(void __iomem *ioaddr, unsigned int asp);
+	int (*safety_feat_config)(void __iomem *ioaddr, unsigned int asp,
+				  struct stmmac_safety_feature_cfg *safety_cfg);
 	int (*safety_feat_irq_status)(struct net_device *ndev,
 			void __iomem *ioaddr, unsigned int asp,
 			struct stmmac_safety_stats *stats);

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -3172,7 +3172,8 @@ static void stmmac_safety_feat_configuration(struct stmmac_priv *priv)
 {
 	if (priv->dma_cap.asp) {
 		netdev_info(priv->dev, "Enabling Safety Features\n");
-		stmmac_safety_feat_config(priv, priv->ioaddr, priv->dma_cap.asp);
+		stmmac_safety_feat_config(priv, priv->ioaddr, priv->dma_cap.asp,
+					  priv->plat->safety_feat_cfg);
 	} else {
 		netdev_info(priv->dev, "No Safety Features support found\n");
 	}

drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

@@ -174,6 +174,12 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
 	if (!plat->dma_cfg)
 		return -ENOMEM;
 
+	plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
+					     sizeof(*plat->safety_feat_cfg),
+					     GFP_KERNEL);
+	if (!plat->safety_feat_cfg)
+		return -ENOMEM;
+
 	/* Enable pci device */
 	ret = pci_enable_device(pdev);
 	if (ret) {
@@ -203,6 +209,16 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
 	res.wol_irq = pdev->irq;
 	res.irq = pdev->irq;
 
+	plat->safety_feat_cfg->tsoee = 1;
+	plat->safety_feat_cfg->mrxpee = 1;
+	plat->safety_feat_cfg->mestee = 1;
+	plat->safety_feat_cfg->mrxee = 1;
+	plat->safety_feat_cfg->mtxee = 1;
+	plat->safety_feat_cfg->epsi = 1;
+	plat->safety_feat_cfg->edpp = 1;
+	plat->safety_feat_cfg->prtyen = 1;
+	plat->safety_feat_cfg->tmouten = 1;
+
 	return stmmac_dvr_probe(&pdev->dev, plat, &res);
 }
 

include/linux/stmmac.h

@@ -172,6 +172,18 @@ struct stmmac_fpe_cfg {
 	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
 };
 
+struct stmmac_safety_feature_cfg {
+	u32 tsoee;
+	u32 mrxpee;
+	u32 mestee;
+	u32 mrxee;
+	u32 mtxee;
+	u32 epsi;
+	u32 edpp;
+	u32 prtyen;
+	u32 tmouten;
+};
+
 struct plat_stmmacenet_data {
 	int bus_id;
 	int phy_addr;
@@ -184,6 +196,7 @@ struct plat_stmmacenet_data {
 	struct stmmac_dma_cfg *dma_cfg;
 	struct stmmac_est *est;
 	struct stmmac_fpe_cfg *fpe_cfg;
+	struct stmmac_safety_feature_cfg *safety_feat_cfg;
 	int clk_csr;
 	int has_gmac;
 	int enh_desc;