Commit 5b8f9703 authored by Russell King (Oracle)'s avatar Russell King (Oracle) Committed by Jakub Kicinski

net: phy: marvell: use phy_write_paged() to set MSCR

Use phy_write_paged() in m88e1118_config_init() to set the MSCR value.
We leave the other paged write for the LEDs in case the DT register
parsing is relying on this page.
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 2d6ec255
......@@ -1225,28 +1225,22 @@ static int m88e1118_config_aneg(struct phy_device *phydev)
static int m88e1118_config_init(struct phy_device *phydev)
{
u16 leds;
int err;
/* Change address */
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
/* Enable 1000 Mbit */
err = phy_write(phydev, 0x15, 0x1070);
if (err < 0)
return err;
/* Change address */
err = marvell_set_page(phydev, MII_MARVELL_LED_PAGE);
err = phy_write_paged(phydev, MII_MARVELL_MSCR_PAGE,
MII_88E1121_PHY_MSCR_REG, 0x1070);
if (err < 0)
return err;
/* Adjust LED Control */
if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
err = phy_write(phydev, 0x10, 0x1100);
leds = 0x1100;
else
err = phy_write(phydev, 0x10, 0x021e);
leds = 0x021e;
err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, 0x10, leds);
if (err < 0)
return err;
......@@ -1254,7 +1248,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
if (err < 0)
return err;
/* Reset address */
/* Reset page register */
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment