Commit 5c33696f authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC/dt fixes from Arnd Bergmann:
 "This round of fixes is almost exclusively device tree changes, with
  trivial defconfig fixes and one compiler warning fix added in.

  A number of patches are to fix dtc warnings, in particular on Amlogic,
  i.MX and Rockchips.

  Other notable changes include:

  Renesas:
   - Fix a wrong clock configuration on R-Mobile A1
   - Fix IOMMU support on R-Car V3H

  Allwinner
   - Multiple audio fixes

  Qualcomm
   - Use a safe CPU voltage on MSM8996
   - Fixes to match a late audio driver change

  Rockchip:
   - Some fixes for the newly added Pinebook Pro

  NXP i.MX:
   - Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board
   - Fix imx6dl-yapp4-ursa board Ethernet connection

  OMAP:
   - A regression fix for non-existing can device on am534x-idk
   - Fix flakey wlan on droid4 where some devices would not connect at
     all because of internal pull being used with an external pull
   - Fix occasional missed wake-up events on droid4 modem uart"

* tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
  ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
  ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
  arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
  arm64: defconfig: add MEDIA_PLATFORM_SUPPORT
  arm64: defconfig: ARCH_R8A7795: follow changed config symbol name
  arm64: defconfig: add DRM_DISPLAY_CONNECTOR
  arm64: defconfig: DRM_DUMB_VGA_DAC: follow changed config symbol name
  ARM: oxnas: make ox820_boot_secondary static
  ARM: dts: r8a7740: Add missing extal2 to CPG node
  ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1
  ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio
  arm64: dts: allwinner: a64: Remove unused SPDIF sound card
  arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name
  arm64: dts: meson-g12: remove spurious blank line
  arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property
  arm64: dts: meson-g12-common: fix dwc2 clock names
  arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supply
  arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM
  ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes
  ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi
  ...
parents 3d1c1e59 d5fef88c
......@@ -10,7 +10,8 @@ Required properties:
- compatible :
- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
LS1028A SoC.
- reg : Specifies base physical address(s) and size of the eDMA registers.
The 1st region is eDMA control register's address and size.
The 2nd and the 3rd regions are programmable channel multiplexing
......
......@@ -40,3 +40,7 @@ &mac {
status = "okay";
dual_emac;
};
&m_can0 {
status = "disabled";
};
......@@ -172,6 +172,7 @@ axi@0 {
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
dma-ranges;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
......@@ -185,7 +186,6 @@ pcie1_rc: pcie@51000000 {
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
......@@ -230,6 +230,7 @@ axi@1 {
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
dma-ranges;
status = "disabled";
pcie2_rc: pcie@51800000 {
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
......@@ -240,7 +241,6 @@ pcie2_rc: pcie@51800000 {
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
......
......@@ -75,8 +75,8 @@ &iomuxc {
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
MX27_PAD_I2C_DATA__I2C_DATA 0x0
MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};
......
......@@ -38,7 +38,7 @@ &reg_usb_h1_vbus {
};
&switch_ports {
/delete-node/ port@2;
/delete-node/ port@3;
};
&touchscreen {
......
......@@ -72,8 +72,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -367,6 +367,8 @@ &mmc2 {
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
vmmc-supply = <&wl12xx_vmmc>;
/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
......@@ -472,6 +474,37 @@ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
>;
};
/*
* Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
* for gpio_100, but the internal pull makes wlan flakey on some
* devices. Off mode value should be tested if we have off mode working
* later on.
*/
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
>;
};
/* gpmc_ncs0.gpio_50 */
poweroff_gpio: pinmux_poweroff_pins {
pinctrl-single,pins = <
......@@ -690,14 +723,18 @@ &timer9 {
};
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.
* The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
* for wake-up events for both the USB PHY and the UART. We can use gpio_149
* pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
* have gpio_149 trigger before the UART transfer starts.
*/
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0xfc>;
&omap4_pmx_core 0x110>;
uart-has-rtscts;
current-speed = <115200>;
};
&uart3 {
......
......@@ -304,7 +304,6 @@ ostm0: timer@e803b000 {
reg = <0xe803b000 0x30>;
interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
clocks = <&cpg CPG_MOD 36>;
clock-names = "ostm0";
power-domains = <&cpg>;
status = "disabled";
};
......@@ -314,7 +313,6 @@ ostm1: timer@e803c000 {
reg = <0xe803c000 0x30>;
interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
clocks = <&cpg CPG_MOD 35>;
clock-names = "ostm1";
power-domains = <&cpg>;
status = "disabled";
};
......@@ -324,7 +322,6 @@ ostm2: timer@e803d000 {
reg = <0xe803d000 0x30>;
interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
clocks = <&cpg CPG_MOD 34>;
clock-names = "ostm2";
power-domains = <&cpg>;
status = "disabled";
};
......
......@@ -131,7 +131,14 @@ i2c5: i2c@e60b0000 {
cmt1: timer@e6130000 {
compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
......
......@@ -479,7 +479,7 @@ fsibck_clk: fsibck {
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extalr_clk>;
clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
......
......@@ -84,8 +84,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -364,8 +364,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -297,8 +297,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -387,8 +387,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -181,8 +181,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -289,8 +289,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -249,14 +249,12 @@ &i2c4 {
*/
hdmi@3d {
compatible = "adi,adv7513";
reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
reg-names = "main", "cec", "edid", "packet";
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
reg-names = "main", "edid", "cec", "packet";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......@@ -280,14 +278,12 @@ adv7513_0_out: endpoint {
hdmi@39 {
compatible = "adi,adv7513";
reg = <0x39>, <0x29>, <0x49>, <0x59>;
reg-names = "main", "cec", "edid", "packet";
reg = <0x39>, <0x49>, <0x29>, <0x59>;
reg-names = "main", "edid", "cec", "packet";
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -366,8 +366,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -255,8 +255,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -128,7 +128,7 @@ gpu: gpu@10090000 {
assigned-clocks = <&cru SCLK_GPU>;
assigned-clock-rates = <100000000>;
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
clock-names = "core", "bus";
clock-names = "bus", "core";
resets = <&cru SRST_GPU>;
status = "disabled";
};
......
......@@ -46,7 +46,7 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: phy@0 {
phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC_PHY>;
......
......@@ -150,7 +150,7 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: phy@0 {
phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
......
......@@ -555,7 +555,7 @@ gpu: gpu@20000000 {
"pp1",
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "core", "bus";
clock-names = "bus", "core";
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
......@@ -1020,7 +1020,7 @@ i2c3_xfer: i2c3-xfer {
};
};
spi-0 {
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
};
......@@ -1038,7 +1038,7 @@ spi0_cs1: spi0-cs1 {
};
};
spi-1 {
spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
};
......
......@@ -84,7 +84,7 @@ gpu: gpu@10090000 {
compatible = "arm,mali-400";
reg = <0x10090000 0x10000>;
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "core", "bus";
clock-names = "bus", "core";
assigned-clocks = <&cru ACLK_GPU>;
assigned-clock-rates = <100000000>;
resets = <&cru SRST_GPU>;
......
......@@ -27,7 +27,8 @@ static void __iomem *gic_cpu_ctrl;
#define GIC_CPU_CTRL 0x00
#define GIC_CPU_CTRL_ENABLE 1
int __init ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
static int __init ox820_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
/*
* Write the address of secondary startup into the
......
......@@ -98,7 +98,7 @@ &codec {
};
&codec_analog {
hpvcc-supply = <&reg_eldo1>;
cpvdd-supply = <&reg_eldo1>;
status = "okay";
};
......
......@@ -154,24 +154,6 @@ link_codec: simple-audio-card,codec {
};
};
sound_spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_out>;
};
};
spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
timer {
compatible = "arm,armv8-timer";
allwinner,erratum-unknown1;
......
......@@ -2319,7 +2319,7 @@ dwc2: usb@ff400000 {
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
clock-names = "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
dr_mode = "peripheral";
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 BayLibre, SAS
......
......@@ -154,6 +154,10 @@ &cpu103 {
clock-latency = <50000>;
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
......
......@@ -545,7 +545,7 @@ &uart_AO {
&usb {
status = "okay";
dr_mode = "host";
vbus-regulator = <&usb_pwr_en>;
vbus-supply = <&usb_pwr_en>;
};
&usb2_phy0 {
......
......@@ -447,7 +447,7 @@ lpuart5: serial@22b0000 {
edma0: dma-controller@22c0000 {
#dma-cells = <2>;
compatible = "fsl,ls1028a-edma";
compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
reg = <0x0 0x22c0000 0x0 0x10000>,
<0x0 0x22d0000 0x0 0x10000>,
<0x0 0x22e0000 0x0 0x10000>;
......
......@@ -264,7 +264,7 @@ soc@0 {
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
......@@ -543,7 +543,7 @@ src: reset-controller@30390000 {
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x10000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
......@@ -603,7 +603,7 @@ system_counter: timer@306a0000 {
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x10000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
......@@ -863,7 +863,7 @@ fec1: ethernet@30be0000 {
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32df0000 0x10000>;
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
......
......@@ -241,7 +241,7 @@ soc@0 {
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -448,7 +448,7 @@ src: reset-controller@30390000 {
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x10000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -508,7 +508,7 @@ system_counter: timer@306a0000 {
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x10000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -718,7 +718,7 @@ sdma1: dma-controller@30bd0000 {
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
<&clk IMX8MN_CLK_SDMA1_ROOT>;
<&clk IMX8MN_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
......@@ -754,7 +754,7 @@ fec1: ethernet@30be0000 {
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32df0000 0x10000>;
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......
......@@ -151,26 +151,26 @@
#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22 0x070 0x2D0 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x074 0x2D4 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC 0x074 0x2D4 0x540 0x2 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1
#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 0x074 0x2D4 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2 0x074 0x2D4 0x618 0x6 0x0
#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23 0x074 0x2D4 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x078 0x2D8 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x078 0x2D8 0x000 0x1 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK 0x078 0x2D8 0x53C 0x2 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x0
#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1
#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 0x078 0x2D8 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3 0x078 0x2D8 0x61C 0x6 0x0
#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24 0x078 0x2D8 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x07C 0x2DC 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00 0x07C 0x2DC 0x534 0x2 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x0
#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1
#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 0x07C 0x2DC 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4 0x07C 0x2DC 0x620 0x6 0x0
#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25 0x07C 0x2DC 0x000 0x7 0x0
#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x080 0x2E0 0x000 0x0 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC 0x080 0x2E0 0x538 0x2 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x0
#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1
#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 0x080 0x2E0 0x000 0x5 0x0
#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B 0x080 0x2E0 0x000 0x6 0x0
#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26 0x080 0x2E0 0x000 0x7 0x0
......@@ -291,7 +291,7 @@
#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA 0x0C8 0x328 0x5C0 0x2 0x1
#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX 0x0C8 0x328 0x5F0 0x3 0x2
#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX 0x0C8 0x328 0x000 0x3 0x0
#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x1
#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x0C8 0x328 0x000 0x5 0x0
#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x0C8 0x328 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02 0x0C8 0x328 0x000 0x7 0x0
......@@ -313,7 +313,7 @@
#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x0D4 0x334 0x000 0x0 0x0
#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO 0x0D4 0x334 0x56C 0x2 0x0
#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN 0x0D4 0x334 0x544 0x3 0x1
#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x1
#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2
#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x0D4 0x334 0x000 0x5 0x0
#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0
#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x0D8 0x338 0x000 0x0 0x0
......@@ -487,27 +487,27 @@
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02 0x134 0x394 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x134 0x394 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x134 0x394 0x5C4 0x3 0x1
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x134 0x394 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x138 0x398 0x4FC 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03 0x138 0x398 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x138 0x398 0x4D8 0x2 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0x138 0x398 0x510 0x3 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x138 0x398 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x138 0x398 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x13C 0x39C 0x500 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04 0x13C 0x39C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC 0x13C 0x39C 0x4D8 0x2 0x1
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0x13C 0x39C 0x50C 0x3 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x13C 0x39C 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x13C 0x39C 0x54C 0x6 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x140 0x3A0 0x504 0x0 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05 0x140 0x3A0 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC 0x140 0x3A0 0x4D8 0x2 0x2
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0x140 0x3A0 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x2
#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3
#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x140 0x3A0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x140 0x3A0 0x000 0x6 0x0
#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK 0x144 0x3A4 0x4F0 0x0 0x0
......@@ -528,22 +528,22 @@
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x150 0x3B0 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x150 0x3B0 0x4F8 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01 0x150 0x3B0 0x000 0x2 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x150 0x3B0 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x150 0x3B0 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01 0x154 0x3B4 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x154 0x3B4 0x4FC 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x154 0x3B4 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x154 0x3B4 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02 0x158 0x3B8 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x158 0x3B8 0x500 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x158 0x3B8 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x158 0x3B8 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03 0x15C 0x3BC 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x15C 0x3BC 0x504 0x1 0x1
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x3
#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4
#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x15C 0x3BC 0x57C 0x4 0x1
#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x15C 0x3BC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04 0x160 0x3C0 0x000 0x0 0x0
......@@ -624,7 +624,7 @@
#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x19C 0x3FC 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX 0x19C 0x3FC 0x5E8 0x4 0x2
#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19C 0x3FC 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x4
#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00 0x19C 0x3FC 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK 0x1A0 0x400 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK 0x1A0 0x400 0x50C 0x1 0x2
......@@ -632,7 +632,7 @@
#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x1A0 0x400 0x5E8 0x4 0x3
#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX 0x1A0 0x400 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x1A0 0x400 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x4
#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01 0x1A0 0x400 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0x1A4 0x404 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00 0x1A4 0x404 0x000 0x1 0x0
......@@ -641,7 +641,7 @@
#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1A4 0x404 0x5E4 0x4 0x2
#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x1A4 0x404 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x1A4 0x404 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x4
#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5
#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02 0x1A4 0x404 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0x1A8 0x408 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01 0x1A8 0x408 0x000 0x1 0x0
......@@ -650,13 +650,13 @@
#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1A8 0x408 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x1A8 0x408 0x5E4 0x4 0x3
#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x1A8 0x408 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x5
#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6
#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE 0x1A8 0x408 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0x1AC 0x40C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02 0x1AC 0x40C 0x000 0x1 0x0
#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x1AC 0x40C 0x54C 0x3 0x1
#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1AC 0x40C 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x5
#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6
#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT 0x1AC 0x40C 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0x1B0 0x410 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03 0x1B0 0x410 0x000 0x1 0x0
......@@ -680,7 +680,7 @@
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0x1B8 0x418 0x000 0x3 0x0
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN 0x1B8 0x418 0x544 0x4 0x2
#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1B8 0x418 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x4
#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5
#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00 0x1B8 0x418 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK 0x1BC 0x41C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02 0x1BC 0x41C 0x000 0x1 0x0
......@@ -697,7 +697,7 @@
#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x1C0 0x420 0x5EC 0x4 0x3
#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS 0x1C0 0x420 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1C0 0x420 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x6
#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7
#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00 0x1C0 0x420 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1C4 0x424 0x4EC 0x0 0x1
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01 0x1C4 0x424 0x000 0x1 0x0
......@@ -706,7 +706,7 @@
#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX 0x1C4 0x424 0x5F0 0x4 0x4
#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX 0x1C4 0x424 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x1C4 0x424 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x5
#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6
#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01 0x1C4 0x424 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1C8 0x428 0x4E8 0x0 0x1
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02 0x1C8 0x428 0x000 0x1 0x0
......@@ -715,7 +715,7 @@
#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX 0x1C8 0x428 0x000 0x4 0x0
#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX 0x1C8 0x428 0x5F0 0x4 0x5
#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x1C8 0x428 0x000 0x5 0x0
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x6
#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7
#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02 0x1C8 0x428 0x000 0x7 0x0
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x1CC 0x42C 0x000 0x0 0x0
#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03 0x1CC 0x42C 0x000 0x1 0x0
......
......@@ -145,7 +145,7 @@ soc@0 {
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -318,7 +318,7 @@ src: reset-controller@30390000 {
aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x400000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -378,7 +378,7 @@ system_counter: timer@306a0000 {
aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x400000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......
......@@ -291,7 +291,7 @@ soc@0 {
bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x301f0000 0x10000>;
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
......@@ -696,7 +696,7 @@ pgc_pcie2: power-domain@a {
bus@30400000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x305f0000 0x10000>;
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
......@@ -756,7 +756,7 @@ system_counter: timer@306a0000 {
bus@30800000 { /* AIPS3 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x309f0000 0x10000>;
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
......@@ -1029,7 +1029,7 @@ fec1: ethernet@30be0000 {
bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32df0000 0x10000>;
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
......
......@@ -658,8 +658,8 @@ s10 {
s11 {
qcom,saw-leader;
regulator-always-on;
regulator-min-microvolt = <1230000>;
regulator-max-microvolt = <1230000>;
regulator-min-microvolt = <980000>;
regulator-max-microvolt = <980000>;
};
};
......@@ -908,10 +908,27 @@ &sdhc2 {
status = "okay";
};
&q6asmdai {
dai@0 {
reg = <0>;
};
dai@1 {
reg = <1>;
};
dai@2 {
reg = <2>;
};
};
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
audio-routing = "RX_BIAS", "MCLK";
audio-routing = "RX_BIAS", "MCLK",
"MM_DL1", "MultiMedia1 Playback",
"MM_DL2", "MultiMedia2 Playback",
"MultiMedia3 Capture", "MM_UL3";
mm1-dai-link {
link-name = "MultiMedia1";
......
......@@ -2066,6 +2066,8 @@ q6asm: q6asm {
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
iommus = <&lpass_q6_smmu 1>;
};
......
......@@ -442,17 +442,14 @@ qi2s@22 {
&q6asmdai {
dai@0 {
reg = <0>;
direction = <2>;
};
dai@1 {
reg = <1>;
direction = <2>;
};
dai@2 {
reg = <2>;
direction = <1>;
};
dai@3 {
......
......@@ -359,12 +359,10 @@ &qupv3_id_1 {
&q6asmdai {
dai@0 {
reg = <0>;
direction = <2>;
};
dai@1 {
reg = <1>;
direction = <1>;
};
};
......
......@@ -137,8 +137,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -150,8 +150,6 @@ hdmi@39{
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -174,8 +174,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -141,8 +141,6 @@ hdmi@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -1318,6 +1318,7 @@ ipmmu_vi0: mmu@febd0000 {
ipmmu_vip0: mmu@e7b00000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7b00000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
......@@ -1325,6 +1326,7 @@ ipmmu_vip0: mmu@e7b00000 {
ipmmu_vip1: mmu@e7960000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7960000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 11>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
......
......@@ -360,8 +360,6 @@ hdmi-encoder@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -272,8 +272,8 @@ adv7180_out: endpoint {
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
reg-names = "main", "edid", "packet", "cec";
reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
reg-names = "main", "edid", "cec", "packet";
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
......@@ -284,8 +284,6 @@ hdmi-encoder@39 {
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
......
......@@ -143,7 +143,7 @@ opp-1296000000 {
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
......
......@@ -127,7 +127,7 @@ opp-1008000000 {
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
......
......@@ -82,17 +82,16 @@ &emmc {
&gmac2phy {
phy-supply = <&vcc_phy>;
clock_in_out = "output";
assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
assigned-clock-rate = <50000000>;
assigned-clocks = <&cru SCLK_MAC2PHY>;
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
status = "okay";
};
&i2c1 {
status = "okay";
rk805: rk805@18 {
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
interrupt-parent = <&gpio2>;
......
......@@ -170,7 +170,7 @@ &hdmiphy {
&i2c1 {
status = "okay";
rk805: rk805@18 {
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
interrupt-parent = <&gpio2>;
......
......@@ -299,8 +299,6 @@ &pdmm0_sdi2_sleep
grf: syscon@ff100000 {
compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
reg = <0x0 0xff100000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
io_domains: io-domains {
compatible = "rockchip,rk3328-io-voltage-domain";
......@@ -1794,10 +1792,6 @@ rmiim1_pins: rmiim1-pins {
};
gmac2phy {
fephyled_speed100: fephyled-speed100 {
rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
};
fephyled_speed10: fephyled-speed10 {
rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
};
......@@ -1806,18 +1800,6 @@ fephyled_duplex: fephyled-duplex {
rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
};
fephyled_rxm0: fephyled-rxm0 {
rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>;
};
fephyled_txm0: fephyled-txm0 {
rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>;
};
fephyled_linkm0: fephyled-linkm0 {
rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
};
fephyled_rxm1: fephyled-rxm1 {
rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
};
......
......@@ -147,7 +147,7 @@ es8316-sound {
"Speaker", "Speaker Amplifier OUTL",
"Speaker", "Speaker Amplifier OUTR";
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
simple-audio-card,aux-devs = <&speaker_amp>;
simple-audio-card,pin-switches = "Speaker";
......@@ -690,7 +690,8 @@ &i2c4 {
fusb0: fusb30x@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int_gpio>;
vbus-supply = <&vbus_typec>;
......@@ -788,13 +789,13 @@ lidbtn_gpio: lidbtn-gpio {
dc-charger {
dc_det_gpio: dc-det-gpio {
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
es8316 {
hp_det_gpio: hp-det-gpio {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
......
......@@ -403,7 +403,7 @@ usbdrd3_0: usb@fe800000 {
reset-names = "usb3-otg";
status = "disabled";
usbdrd_dwc3_0: dwc3 {
usbdrd_dwc3_0: usb@fe800000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
......@@ -439,7 +439,7 @@ usbdrd3_1: usb@fe900000 {
reset-names = "usb3-otg";
status = "disabled";
usbdrd_dwc3_1: dwc3 {
usbdrd_dwc3_1: usb@fe900000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
......@@ -1124,8 +1124,6 @@ pd_vopl@RK3399_PD_VOPL {
pmugrf: syscon@ff320000 {
compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff320000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
pmu_io_domains: io-domains {
compatible = "rockchip,rk3399-pmu-io-voltage-domain";
......@@ -1883,10 +1881,10 @@ edp_in_vopl: endpoint@1 {
gpu: gpu@ff9a0000 {
compatible = "rockchip,rk3399-mali", "arm,mali-t860";
reg = <0x0 0xff9a0000 0x0 0x10000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "gpu", "job", "mmu";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
#cooling-cells = <2>;
power-domains = <&power RK3399_PD_GPU>;
......
......@@ -208,7 +208,7 @@ CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCIE_TEGRA194=m
CONFIG_PCIE_TEGRA194_HOST=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_FW_LOADER_USER_HELPER=y
......@@ -567,6 +567,7 @@ CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
# CONFIG_DVB_NET is not set
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
......@@ -610,8 +611,9 @@ CONFIG_DRM_MSM=m
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_DUMB_VGA_DAC=m
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TI_SN65DSI86=m
......@@ -848,7 +850,8 @@ CONFIG_QCOM_APR=m
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_R8A77950=y
CONFIG_ARCH_R8A77951=y
CONFIG_ARCH_R8A77960=y
CONFIG_ARCH_R8A77961=y
CONFIG_ARCH_R8A77965=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment