Skip to content

L
linux
Commit 5c56f466 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc 

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (34 commits)
  [POWERPC] 86xx: Cleaned up platform dts files
  [POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards
  [POWERPC] 85xx: Cleaning up machine probing
  [POWERPC] QE: clean up ucc_slow.c and ucc_fast.c
  [POWERPC] 85xx: Cleaned up platform dts files
  [POWERPC] 83xx: Renamed MPC8323 MDS dts and defconfig to match other boards
  [POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDS
  [POWERPC] 83xx: Use of_platform_bus_probe to setup QE devices
  [POWERPC] 83xx: use default value of loops_per_jiffy
  [POWERPC] 83xx: Remove obsolete setting of ROOT_DEV.
  [POWERPC] 83xx: Cleaning up machine probing and board initcalls
  [POWERPC] Dispose irq mapping when done in mpc52xx_serial.c
  [POWERPC] 86xx: Add missing of_node_put() in mpc86xx_hpcn_init_irq().
  [POWERPC] 8[56]xx: Remove obsolete setting of ROOT_DEV for 85xx and 86xx platforms.
  [POWERPC] pseries: Enabling auto poweron after power is restored.
  [POWERPC] use winbond libata instead of ide driver for pseries CD drives
  [POWERPC] powerpc: remove references to the obsolete linux,platform property
  [POWERPC] add of_get_mac_address and update fsl_soc.c to use it
  [POWERPC] 83xx: Cleaned up 83xx platform dts files
  [POWERPC] Fix bug with early ioremap and 64k pages
  ...
parents dd397a6d c2944612
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2523 additions and 1461 deletions
Documentation/powerpc/booting-without-of.txt
View file @ 5c56f466
......@@ -497,7 +497,7 @@ looks like in practice.
| |- device_type = "cpu"
| |- reg = <0>
| |- clock-frequency = <5f5e1000>
| |- linux,boot-cpu
| |- 64-bit
| |- linux,phandle = <2>
|
o memory@0
......@@ -509,7 +509,6 @@ looks like in practice.
o chosen
|- name = "chosen"
|- bootargs = "root=/dev/sda2"
|- linux,platform = <00000600>
|- linux,phandle = <4>
This tree is almost a minimal tree. It pretty much contains the
......@@ -519,7 +518,7 @@ physical memory layout. It also includes misc information passed
through /chosen, like in this example, the platform type (mandatory)
and the kernel command line arguments (optional).
The /cpus/PowerPC,970@0/linux,boot-cpu property is an example of a
The /cpus/PowerPC,970@0/64-bit property is an example of a
property without a value. All other properties have a value. The
significance of the #address-cells and #size-cells properties will be
explained in chapter IV which defines precisely the required nodes and
......@@ -733,8 +732,7 @@ address which can extend beyond that limit.
that typically get driven by the same platform code in the
kernel, you would use a different "model" property but put a
value in "compatible". The kernel doesn't directly use that
value (see /chosen/linux,platform for how the kernel chooses a
platform type) but it is generally useful.
value but it is generally useful.
The root node is also generally where you add additional properties
specific to your board like the serial number if any, that sort of
......@@ -778,7 +776,6 @@ address which can extend beyond that limit.
bytes
- d-cache-size : one cell, size of L1 data cache in bytes
- i-cache-size : one cell, size of L1 instruction cache in bytes
- linux, boot-cpu : Should be defined if this cpu is the boot cpu.
Recommended properties:
......@@ -843,11 +840,6 @@ address which can extend beyond that limit.
the prom_init() trampoline when booting with an OF client interface,
but that you have to provide yourself when using the flattened format.
Required properties:
- linux,platform : This is your platform number as assigned by the
architecture maintainers
Recommended properties:
- bootargs : This zero-terminated string is passed as the kernel
......
arch/powerpc/Kconfig
View file @ 5c56f466
......@@ -620,6 +620,15 @@ config RTAS_FLASH
tristate "Firmware flash interface"
depends on PPC64 && RTAS_PROC
config PPC_PMI
tristate "Support for PMI"
depends PPC_IBM_CELL_BLADE
help
PMI (Platform Management Interrupt) is a way to
communicate with the BMC (Baseboard Mangement Controller).
It is used in some IBM Cell blades.
default m
config MMIO_NVRAM
bool
default n
......
arch/powerpc/boot/dts/kuroboxHD.dts
View file @ 5c56f466
......@@ -35,7 +35,6 @@ cpus {
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
linux,boot-cpu;
device_type = "cpu";
reg = <0>;
clock-frequency = <bebc200>; /* Fixed by bootwrapper */
......
arch/powerpc/boot/dts/kuroboxHG.dts
View file @ 5c56f466
......@@ -35,7 +35,6 @@ cpus {
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
linux,boot-cpu;
device_type = "cpu";
reg = <0>;
clock-frequency = <fdad680>; /* Fixed by bootwrapper */
......
arch/powerpc/boot/dts/mpc7448hpc2.dts
View file @ 5c56f466
......@@ -36,7 +36,6 @@ PowerPC,7448@0 {
bus-frequency = <0>; // From U-Boot
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
......
arch/powerpc/boot/dts/mpc8272ads.dts
View file @ 5c56f466
......@@ -34,7 +34,6 @@ PowerPC,8272@0 {
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
......
arch/powerpc/boot/dts/mpc8313erdb.dts
View file @ 5c56f466
......@@ -11,7 +11,7 @@
/ {
model = "MPC8313ERDB";
compatible = "MPC83xx";
compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
#address-cells = <1>;
#size-cells = <1>;
......@@ -59,7 +59,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -68,7 +68,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -77,7 +77,7 @@ spi@7000 {
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
mode = <0>;
};
......@@ -88,8 +88,8 @@ usb@23000 {
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
phy_type = "utmi_wide";
};
......@@ -99,18 +99,15 @@ mdio@24520 {
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <24520>;
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <700>;
interrupts = <13 2>;
phy1: ethernet-phy@1 {
interrupt-parent = < &ipic >;
interrupts = <13 8>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@4 {
linux,phandle = <2452004>;
interrupt-parent = <700>;
interrupts = <14 2>;
phy4: ethernet-phy@4 {
interrupt-parent = < &ipic >;
interrupts = <14 8>;
reg = <4>;
device_type = "ethernet-phy";
};
......@@ -123,8 +120,8 @@ ethernet@24000 {
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <25 8 24 8 23 8>;
interrupt-parent = <700>;
phy-handle = <2452001>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1 >;
};
ethernet@25000 {
......@@ -134,8 +131,8 @@ ethernet@25000 {
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <22 8 21 8 20 8>;
interrupt-parent = <700>;
phy-handle = <2452004>;
interrupt-parent = < &ipic >;
phy-handle = < &phy4 >;
};
serial@4500 {
......@@ -144,7 +141,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
serial@4600 {
......@@ -153,7 +150,7 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
pci@8500 {
......@@ -161,17 +158,17 @@ pci@8500 {
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
7000 0 0 1 700 12 8
7000 0 0 2 700 12 8
7000 0 0 3 700 12 8
7000 0 0 4 700 12 8
7000 0 0 1 &ipic 12 8
7000 0 0 2 &ipic 12 8
7000 0 0 3 &ipic 12 8
7000 0 0 4 &ipic 12 8
/* IDSEL 0x0F - PCI slot */
7800 0 0 1 700 11 8
7800 0 0 2 700 12 8
7800 0 0 3 700 11 8
7800 0 0 4 700 12 8>;
interrupt-parent = <700>;
7800 0 0 1 &ipic 11 8
7800 0 0 2 &ipic 12 8
7800 0 0 3 &ipic 11 8
7800 0 0 4 &ipic 12 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
......@@ -192,7 +189,7 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
......@@ -206,8 +203,7 @@ crypto@30000 {
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
pic@700 {
linux,phandle = <700>;
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
......
arch/powerpc/boot/dts/mpc8323emds.dts → arch/powerpc/boot/dts/mpc832x_mds.dts
View file @ 5c56f466
......@@ -11,16 +11,14 @@
/ {
model = "MPC8323EMDS";
compatible = "MPC83xx";
compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8323@0 {
device_type = "cpu";
......@@ -33,14 +31,11 @@ PowerPC,8323@0 {
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>;
};
......@@ -69,7 +64,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -79,7 +74,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
serial@4600 {
......@@ -88,7 +83,7 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
......@@ -97,7 +92,7 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
......@@ -106,51 +101,50 @@ crypto@30000 {
};
pci@8500 {
linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 700 14 8
8800 0 0 2 700 15 8
8800 0 0 3 700 16 8
8800 0 0 4 700 17 8
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 700 16 8
9000 0 0 2 700 17 8
9000 0 0 3 700 14 8
9000 0 0 4 700 15 8
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 700 17 8
9800 0 0 2 700 14 8
9800 0 0 3 700 15 8
9800 0 0 4 700 16 8
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 700 14 8
a800 0 0 2 700 15 8
a800 0 0 3 700 16 8
a800 0 0 4 700 17 8
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 700 17 8
b000 0 0 2 700 14 8
b000 0 0 3 700 15 8
b000 0 0 4 700 16 8
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 700 16 8
b800 0 0 2 700 17 8
b800 0 0 3 700 14 8
b800 0 0 4 700 15 8
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 700 15 8
c000 0 0 2 700 16 8
c000 0 0 3 700 17 8
c000 0 0 4 700 14 8>;
interrupt-parent = <700>;
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 90000000 0 10000000
......@@ -165,8 +159,7 @@ c000 0 0 3 700 17 8
device_type = "pci";
};
pic@700 {
linux,phandle = <700>;
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
......@@ -180,8 +173,7 @@ par_io@1400 {
device_type = "par_io";
num-ports = <7>;
ucc_pin@03 {
linux,phandle = <140003>;
pio3: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
......@@ -204,8 +196,7 @@ ucc_pin@03 {
1 c 1 0 1 0 /* TX_EN */
1 d 2 0 1 0>;/* CRS */
};
ucc_pin@04 {
linux,phandle = <140004>;
pio4: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 1f 2 0 1 0 /* RX_CLK (CLK7) */
......@@ -252,7 +243,7 @@ spi@4c0 {
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mode = "cpu";
};
......@@ -261,7 +252,7 @@ spi@500 {
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mode = "cpu";
};
......@@ -270,7 +261,7 @@ usb@6c0 {
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mode = "slave";
};
......@@ -281,12 +272,12 @@ ucc@2200 {
device-id = <3>;
reg = <2200 200>;
interrupts = <22>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <19>;
tx-clock = <1a>;
phy-handle = <212003>;
pio-handle = <140003>;
phy-handle = < &phy3 >;
pio-handle = < &pio3 >;
};
ucc@3200 {
......@@ -296,12 +287,12 @@ ucc@3200 {
device-id = <4>;
reg = <3000 200>;
interrupts = <23>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <17>;
tx-clock = <18>;
phy-handle = <212004>;
pio-handle = <140004>;
phy-handle = < &phy4 >;
pio-handle = < &pio4 >;
};
mdio@2320 {
......@@ -311,26 +302,23 @@ mdio@2320 {
device_type = "mdio";
compatible = "ucc_geth_phy";
ethernet-phy@03 {
linux,phandle = <212003>;
interrupt-parent = <700>;
interrupts = <11 2>;
phy3: ethernet-phy@03 {
interrupt-parent = < &ipic >;
interrupts = <11 8>;
reg = <3>;
device_type = "ethernet-phy";
interface = <3>; //ENET_100_MII
};
ethernet-phy@04 {
linux,phandle = <212004>;
interrupt-parent = <700>;
interrupts = <12 2>;
phy4: ethernet-phy@04 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <4>;
device_type = "ethernet-phy";
interface = <3>;
};
};
qeic@80 {
linux,phandle = <80>;
qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
......@@ -339,7 +327,7 @@ qeic@80 {
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
};
};
arch/powerpc/boot/dts/mpc8349emitx.dts
View file @ 5c56f466
......@@ -10,7 +10,7 @@
*/
/ {
model = "MPC8349EMITX";
compatible = "MPC834xMITX";
compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
#address-cells = <1>;
#size-cells = <1>;
......@@ -58,7 +58,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -67,7 +67,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -76,7 +76,7 @@ spi@7000 {
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
mode = <0>;
};
......@@ -86,8 +86,8 @@ usb@22000 {
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <27 2>;
interrupt-parent = < &ipic >;
interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
......@@ -98,8 +98,8 @@ usb@23000 {
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
phy_type = "ulpi";
};
......@@ -109,22 +109,19 @@ mdio@24520 {
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <24520>;
/* Vitesse 8201 */
ethernet-phy@1c {
linux,phandle = <245201c>;
interrupt-parent = <700>;
interrupts = <12 2>;
phy1c: ethernet-phy@1c {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1c>;
device_type = "ethernet-phy";
};
/* Vitesse 7385 */
ethernet-phy@1f {
linux,phandle = <245201f>;
interrupt-parent = <700>;
interrupts = <12 2>;
phy1f: ethernet-phy@1f {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1f>;
device_type = "ethernet-phy";
};
......@@ -138,8 +135,8 @@ ethernet@24000 {
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
interrupt-parent = <700>;
phy-handle = <245201c>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1c >;
};
ethernet@25000 {
......@@ -152,8 +149,8 @@ ethernet@25000 {
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
interrupt-parent = <700>;
phy-handle = <245201f>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1f >;
};
serial@4500 {
......@@ -162,7 +159,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
serial@4600 {
......@@ -171,16 +168,16 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>; // from bootloader
interrupts = <a 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 - SATA */
8000 0 0 1 700 16 8 /* SATA_INTA */
8000 0 0 1 &ipic 16 8 /* SATA_INTA */
>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
......@@ -199,13 +196,13 @@ pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E - MiniPCI Slot */
7000 0 0 1 700 15 8 /* PCI_INTA */
7000 0 0 1 &ipic 15 8 /* PCI_INTA */
/* IDSEL 0x0F - PCI Slot */
7800 0 0 1 700 14 8 /* PCI_INTA */
7800 0 0 2 700 15 8 /* PCI_INTB */
7800 0 0 1 &ipic 14 8 /* PCI_INTA */
7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
......@@ -226,15 +223,14 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
descriptor-types-mask = <01010ebf>;
};
pic@700 {
linux,phandle = <700>;
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
......
arch/powerpc/boot/dts/mpc8349emitxgp.dts
View file @ 5c56f466
......@@ -10,7 +10,7 @@
*/
/ {
model = "MPC8349EMITXGP";
compatible = "MPC834xMITXGP";
compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
#address-cells = <1>;
#size-cells = <1>;
......@@ -58,7 +58,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -67,7 +67,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -76,7 +76,7 @@ spi@7000 {
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
mode = <0>;
};
......@@ -86,8 +86,8 @@ usb@23000 {
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
......@@ -98,13 +98,11 @@ mdio@24520 {
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <24520>;
/* Vitesse 8201 */
ethernet-phy@1c {
linux,phandle = <245201c>;
interrupt-parent = <700>;
interrupts = <12 2>;
phy1c: ethernet-phy@1c {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1c>;
device_type = "ethernet-phy";
};
......@@ -117,8 +115,8 @@ ethernet@24000 {
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
interrupt-parent = <700>;
phy-handle = <245201c>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1c >;
};
serial@4500 {
......@@ -127,7 +125,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
serial@4600 {
......@@ -136,17 +134,17 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>; // from bootloader
interrupts = <a 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0F - PCI Slot */
7800 0 0 1 700 14 8 /* PCI_INTA */
7800 0 0 2 700 15 8 /* PCI_INTB */
7800 0 0 1 &ipic 14 8 /* PCI_INTA */
7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
......@@ -167,15 +165,14 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
descriptor-types-mask = <01010ebf>;
};
pic@700 {
linux,phandle = <700>;
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
......
arch/powerpc/boot/dts/mpc834x_mds.dts
View file @ 5c56f466
......@@ -11,7 +11,7 @@
/ {
model = "MPC8349EMDS";
compatible = "MPC834xMDS";
compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
......@@ -64,7 +64,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -73,7 +73,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -82,7 +82,7 @@ spi@7000 {
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
mode = <0>;
};
......@@ -94,8 +94,8 @@ usb@22000 {
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <27 2>;
interrupt-parent = < &ipic >;
interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
......@@ -106,8 +106,8 @@ usb@23000 {
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
......@@ -118,18 +118,15 @@ mdio@24520 {
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <700>;
interrupts = <11 2>;
phy0: ethernet-phy@0 {
interrupt-parent = < &ipic >;
interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <700>;
interrupts = <12 2>;
phy1: ethernet-phy@1 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
};
......@@ -143,8 +140,8 @@ ethernet@24000 {
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
interrupt-parent = <700>;
phy-handle = <2452000>;
interrupt-parent = < &ipic >;
phy-handle = < &phy0 >;
};
ethernet@25000 {
......@@ -157,8 +154,8 @@ ethernet@25000 {
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
interrupt-parent = <700>;
phy-handle = <2452001>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1 >;
};
serial@4500 {
......@@ -167,7 +164,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
serial@4600 {
......@@ -176,7 +173,7 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
pci@8500 {
......@@ -184,47 +181,47 @@ pci@8500 {
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 700 14 8
8800 0 0 2 700 15 8
8800 0 0 3 700 16 8
8800 0 0 4 700 17 8
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 700 16 8
9000 0 0 2 700 17 8
9000 0 0 3 700 14 8
9000 0 0 4 700 15 8
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 700 17 8
9800 0 0 2 700 14 8
9800 0 0 3 700 15 8
9800 0 0 4 700 16 8
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 700 14 8
a800 0 0 2 700 15 8
a800 0 0 3 700 16 8
a800 0 0 4 700 17 8
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 700 17 8
b000 0 0 2 700 14 8
b000 0 0 3 700 15 8
b000 0 0 4 700 16 8
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 700 16 8
b800 0 0 2 700 17 8
b800 0 0 3 700 14 8
b800 0 0 4 700 15 8
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 700 15 8
c000 0 0 2 700 16 8
c000 0 0 3 700 17 8
c000 0 0 4 700 14 8>;
interrupt-parent = <700>;
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
......@@ -244,47 +241,47 @@ pci@8600 {
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 700 14 8
8800 0 0 2 700 15 8
8800 0 0 3 700 16 8
8800 0 0 4 700 17 8
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 700 16 8
9000 0 0 2 700 17 8
9000 0 0 3 700 14 8
9000 0 0 4 700 15 8
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 700 17 8
9800 0 0 2 700 14 8
9800 0 0 3 700 15 8
9800 0 0 4 700 16 8
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 700 14 8
a800 0 0 2 700 15 8
a800 0 0 3 700 16 8
a800 0 0 4 700 17 8
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 700 17 8
b000 0 0 2 700 14 8
b000 0 0 3 700 15 8
b000 0 0 4 700 16 8
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 700 16 8
b800 0 0 2 700 17 8
b800 0 0 3 700 14 8
b800 0 0 4 700 15 8
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 700 15 8
c000 0 0 2 700 16 8
c000 0 0 3 700 17 8
c000 0 0 4 700 14 8>;
interrupt-parent = <700>;
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
......@@ -306,7 +303,7 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
......@@ -321,8 +318,7 @@ crypto@30000 {
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
pic@700 {
linux,phandle = <700>;
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
......
arch/powerpc/boot/dts/mpc8360emds.dts → arch/powerpc/boot/dts/mpc836x_mds.dts
View file @ 5c56f466
......@@ -15,17 +15,15 @@
*/
/ {
model = "MPC8360EPB";
compatible = "MPC83xx";
model = "MPC8360MDS";
compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8360@0 {
device_type = "cpu";
......@@ -38,14 +36,11 @@ PowerPC,8360@0 {
bus-frequency = <FBC5200>;
clock-frequency = <1F78A400>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
......@@ -74,7 +69,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -83,7 +78,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
dfsrr;
};
......@@ -93,7 +88,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <FBC5200>;
interrupts = <9 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
serial@4600 {
......@@ -102,7 +97,7 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <FBC5200>;
interrupts = <a 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
......@@ -111,7 +106,7 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
......@@ -120,52 +115,51 @@ crypto@30000 {
};
pci@8500 {
linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 700 14 8
8800 0 0 2 700 15 8
8800 0 0 3 700 16 8
8800 0 0 4 700 17 8
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 700 16 8
9000 0 0 2 700 17 8
9000 0 0 3 700 14 8
9000 0 0 4 700 15 8
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 700 17 8
9800 0 0 2 700 14 8
9800 0 0 3 700 15 8
9800 0 0 4 700 16 8
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 700 14 8
a800 0 0 2 700 15 8
a800 0 0 3 700 16 8
a800 0 0 4 700 17 8
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 700 17 8
b000 0 0 2 700 14 8
b000 0 0 3 700 15 8
b000 0 0 4 700 16 8
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 700 16 8
b800 0 0 2 700 17 8
b800 0 0 3 700 14 8
b800 0 0 4 700 15 8
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 700 15 8
c000 0 0 2 700 16 8
c000 0 0 3 700 17 8
c000 0 0 4 700 14 8>;
interrupt-parent = <700>;
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
......@@ -180,8 +174,7 @@ c000 0 0 3 700 17 8
device_type = "pci";
};
pic@700 {
linux,phandle = <700>;
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
......@@ -195,8 +188,7 @@ par_io@1400 {
device_type = "par_io";
num-ports = <7>;
ucc_pin@01 {
linux,phandle = <140001>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
......@@ -223,8 +215,7 @@ ucc_pin@01 {
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
ucc_pin@02 {
linux,phandle = <140002>;
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 11 1 0 1 0 /* TxD0 */
......@@ -281,7 +272,7 @@ spi@4c0 {
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mode = "cpu";
};
......@@ -290,7 +281,7 @@ spi@500 {
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mode = "cpu";
};
......@@ -299,7 +290,7 @@ usb@6c0 {
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mode = "slave";
};
......@@ -310,12 +301,12 @@ ucc@2000 {
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <212000>;
pio-handle = <140001>;
phy-handle = < &phy0 >;
pio-handle = < &pio1 >;
};
ucc@3000 {
......@@ -325,12 +316,12 @@ ucc@3000 {
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
interrupt-parent = <80>;
interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <212001>;
pio-handle = <140002>;
phy-handle = < &phy1 >;
pio-handle = < &pio2 >;
};
mdio@2120 {
......@@ -340,26 +331,23 @@ mdio@2120 {
device_type = "mdio";
compatible = "ucc_geth_phy";
ethernet-phy@00 {
linux,phandle = <212000>;
interrupt-parent = <700>;
interrupts = <11 2>;
phy0: ethernet-phy@00 {
interrupt-parent = < &ipic >;
interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy@01 {
linux,phandle = <212001>;
interrupt-parent = <700>;
interrupts = <12 2>;
phy1: ethernet-phy@01 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
};
qeic@80 {
linux,phandle = <80>;
qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
......@@ -368,7 +356,7 @@ qeic@80 {
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
interrupt-parent = <700>;
interrupt-parent = < &ipic >;
};
};
......
arch/powerpc/boot/dts/mpc8540ads.dts
View file @ 5c56f466
......@@ -12,16 +12,14 @@
/ {
model = "MPC8540ADS";
compatible = "MPC85xxADS";
compatible = "MPC8540ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8540@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@ PowerPC,8540@0 {
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,24 +64,20 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -102,8 +94,8 @@ ethernet@24000 {
address = [ 00 E0 0C 00 73 00 ];
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -116,8 +108,8 @@ ethernet@25000 {
address = [ 00 E0 0C 00 73 01 ];
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
ethernet@26000 {
......@@ -130,8 +122,8 @@ ethernet@26000 {
address = [ 00 E0 0C 00 73 02 ];
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 2>;
interrupt-parent = <40000>;
phy-handle = <2452003>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial@4500 {
......@@ -140,7 +132,7 @@ serial@4500 {
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -149,85 +141,84 @@ serial@4600 {
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x02 */
1000 0 0 1 40000 31 1
1000 0 0 2 40000 32 1
1000 0 0 3 40000 33 1
1000 0 0 4 40000 34 1
1000 0 0 1 &mpic 31 1
1000 0 0 2 &mpic 32 1
1000 0 0 3 &mpic 33 1
1000 0 0 4 &mpic 34 1
/* IDSEL 0x03 */
1800 0 0 1 40000 34 1
1800 0 0 2 40000 31 1
1800 0 0 3 40000 32 1
1800 0 0 4 40000 33 1
1800 0 0 1 &mpic 34 1
1800 0 0 2 &mpic 31 1
1800 0 0 3 &mpic 32 1
1800 0 0 4 &mpic 33 1
/* IDSEL 0x04 */
2000 0 0 1 40000 33 1
2000 0 0 2 40000 34 1
2000 0 0 3 40000 31 1
2000 0 0 4 40000 32 1
2000 0 0 1 &mpic 33 1
2000 0 0 2 &mpic 34 1
2000 0 0 3 &mpic 31 1
2000 0 0 4 &mpic 32 1
/* IDSEL 0x05 */
2800 0 0 1 40000 32 1
2800 0 0 2 40000 33 1
2800 0 0 3 40000 34 1
2800 0 0 4 40000 31 1
2800 0 0 1 &mpic 32 1
2800 0 0 2 &mpic 33 1
2800 0 0 3 &mpic 34 1
2800 0 0 4 &mpic 31 1
/* IDSEL 0x0c */
6000 0 0 1 40000 31 1
6000 0 0 2 40000 32 1
6000 0 0 3 40000 33 1
6000 0 0 4 40000 34 1
6000 0 0 1 &mpic 31 1
6000 0 0 2 &mpic 32 1
6000 0 0 3 &mpic 33 1
6000 0 0 4 &mpic 34 1
/* IDSEL 0x0d */
6800 0 0 1 40000 34 1
6800 0 0 2 40000 31 1
6800 0 0 3 40000 32 1
6800 0 0 4 40000 33 1
6800 0 0 1 &mpic 34 1
6800 0 0 2 &mpic 31 1
6800 0 0 3 &mpic 32 1
6800 0 0 4 &mpic 33 1
/* IDSEL 0x0e */
7000 0 0 1 40000 33 1
7000 0 0 2 40000 34 1
7000 0 0 3 40000 31 1
7000 0 0 4 40000 32 1
7000 0 0 1 &mpic 33 1
7000 0 0 2 &mpic 34 1
7000 0 0 3 &mpic 31 1
7000 0 0 4 &mpic 32 1
/* IDSEL 0x0f */
7800 0 0 1 40000 32 1
7800 0 0 2 40000 33 1
7800 0 0 3 40000 34 1
7800 0 0 4 40000 31 1
7800 0 0 1 &mpic 32 1
7800 0 0 2 &mpic 33 1
7800 0 0 3 &mpic 34 1
7800 0 0 4 &mpic 31 1
/* IDSEL 0x12 */
9000 0 0 1 40000 31 1
9000 0 0 2 40000 32 1
9000 0 0 3 40000 33 1
9000 0 0 4 40000 34 1
9000 0 0 1 &mpic 31 1
9000 0 0 2 &mpic 32 1
9000 0 0 3 &mpic 33 1
9000 0 0 4 &mpic 34 1
/* IDSEL 0x13 */
9800 0 0 1 40000 34 1
9800 0 0 2 40000 31 1
9800 0 0 3 40000 32 1
9800 0 0 4 40000 33 1
9800 0 0 1 &mpic 34 1
9800 0 0 2 &mpic 31 1
9800 0 0 3 &mpic 32 1
9800 0 0 4 &mpic 33 1
/* IDSEL 0x14 */
a000 0 0 1 40000 33 1
a000 0 0 2 40000 34 1
a000 0 0 3 40000 31 1
a000 0 0 4 40000 32 1
a000 0 0 1 &mpic 33 1
a000 0 0 2 &mpic 34 1
a000 0 0 3 &mpic 31 1
a000 0 0 4 &mpic 32 1
/* IDSEL 0x15 */
a800 0 0 1 40000 32 1
a800 0 0 2 40000 33 1
a800 0 0 3 40000 34 1
a800 0 0 4 40000 31 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 32 1
a800 0 0 2 &mpic 33 1
a800 0 0 3 &mpic 34 1
a800 0 0 4 &mpic 31 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -241,8 +232,7 @@ a800 0 0 3 40000 34 1
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8541cds.dts
View file @ 5c56f466
......@@ -12,16 +12,14 @@
/ {
model = "MPC8541CDS";
compatible = "MPC85xxCDS";
compatible = "MPC8541CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8541@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@ PowerPC,8541@0 {
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,17 +64,14 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
......@@ -94,8 +87,8 @@ ethernet@24000 {
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -107,8 +100,8 @@ ethernet@25000 {
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
serial@4500 {
......@@ -117,7 +110,7 @@ serial@4500 {
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -126,57 +119,56 @@ serial@4600 {
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 40000 30 1
08000 0 0 2 40000 31 1
08000 0 0 3 40000 32 1
08000 0 0 4 40000 33 1
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 40000 30 1
08800 0 0 2 40000 31 1
08800 0 0 3 40000 32 1
08800 0 0 4 40000 33 1
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 40000 30 1
09000 0 0 2 40000 31 1
09000 0 0 3 40000 32 1
09000 0 0 4 40000 33 1
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 40000 31 1
09800 0 0 2 40000 32 1
09800 0 0 3 40000 33 1
09800 0 0 4 40000 30 1
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 40000 32 1
0a000 0 0 2 40000 33 1
0a000 0 0 3 40000 30 1
0a000 0 0 4 40000 31 1
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 40000 33 1
0a800 0 0 2 40000 30 1
0a800 0 0 3 40000 31 1
0a800 0 0 4 40000 32 1
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 40000 30 1
19000 0 0 2 40000 31 1
19000 0 0 3 40000 32 1
19000 0 0 4 40000 33 1>;
interrupt-parent = <40000>;
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -200,21 +192,20 @@ i8259@19000 {
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <8000>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 40000 3b 1
a800 0 0 2 40000 3b 1
a800 0 0 3 40000 3b 1
a800 0 0 4 40000 3b 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
......@@ -228,8 +219,7 @@ a800 0 0 3 40000 3b 1
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8548cds.dts
View file @ 5c56f466
......@@ -12,16 +12,14 @@
/ {
model = "MPC8548CDS";
compatible = "MPC85xxCDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8548@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@ PowerPC,8548@0 {
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,32 +64,26 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -109,8 +99,8 @@ ethernet@24000 {
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -122,10 +112,11 @@ ethernet@25000 {
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
/* eTSEC 3/4 are currently broken
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -135,11 +126,10 @@ ethernet@26000 {
reg = <26000 1000>;
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <f 2 10 2 11 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
/* eTSEC 4 is currently broken
ethernet@27000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -149,8 +139,8 @@ ethernet@27000 {
reg = <27000 1000>;
local-mac-address = [ 00 E0 0C 00 73 03 ];
interrupts = <15 2 16 2 17 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
*/
......@@ -160,7 +150,7 @@ serial@4500 {
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -169,57 +159,56 @@ serial@4600 {
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 40000 30 1
08000 0 0 2 40000 31 1
08000 0 0 3 40000 32 1
08000 0 0 4 40000 33 1
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 40000 30 1
08800 0 0 2 40000 31 1
08800 0 0 3 40000 32 1
08800 0 0 4 40000 33 1
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 40000 30 1
09000 0 0 2 40000 31 1
09000 0 0 3 40000 32 1
09000 0 0 4 40000 33 1
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 40000 31 1
09800 0 0 2 40000 32 1
09800 0 0 3 40000 33 1
09800 0 0 4 40000 30 1
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 40000 32 1
0a000 0 0 2 40000 33 1
0a000 0 0 3 40000 30 1
0a000 0 0 4 40000 31 1
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 40000 33 1
0a800 0 0 2 40000 30 1
0a800 0 0 3 40000 31 1
0a800 0 0 4 40000 32 1
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 40000 30 1
19000 0 0 2 40000 31 1
19000 0 0 3 40000 32 1
19000 0 0 4 40000 33 1>;
interrupt-parent = <40000>;
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -243,21 +232,20 @@ i8259@19000 {
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <8000>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 40000 3b 1
a800 0 0 2 40000 3b 1
a800 0 0 3 40000 3b 1
a800 0 0 4 40000 3b 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
......@@ -271,8 +259,7 @@ a800 0 0 3 40000 3b 1
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8555cds.dts
View file @ 5c56f466
......@@ -12,16 +12,14 @@
/ {
model = "MPC8555CDS";
compatible = "MPC85xxCDS";
compatible = "MPC8555CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8555@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@ PowerPC,8555@0 {
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,17 +64,14 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
......@@ -94,8 +87,8 @@ ethernet@24000 {
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <0d 2 0e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -107,8 +100,8 @@ ethernet@25000 {
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
serial@4500 {
......@@ -117,7 +110,7 @@ serial@4500 {
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -126,57 +119,56 @@ serial@4600 {
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 40000 30 1
08000 0 0 2 40000 31 1
08000 0 0 3 40000 32 1
08000 0 0 4 40000 33 1
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 40000 30 1
08800 0 0 2 40000 31 1
08800 0 0 3 40000 32 1
08800 0 0 4 40000 33 1
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 40000 30 1
09000 0 0 2 40000 31 1
09000 0 0 3 40000 32 1
09000 0 0 4 40000 33 1
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 40000 31 1
09800 0 0 2 40000 32 1
09800 0 0 3 40000 33 1
09800 0 0 4 40000 30 1
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 40000 32 1
0a000 0 0 2 40000 33 1
0a000 0 0 3 40000 30 1
0a000 0 0 4 40000 31 1
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 40000 33 1
0a800 0 0 2 40000 30 1
0a800 0 0 3 40000 31 1
0a800 0 0 4 40000 32 1
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 40000 30 1
19000 0 0 2 40000 31 1
19000 0 0 3 40000 32 1
19000 0 0 4 40000 33 1>;
interrupt-parent = <40000>;
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -200,21 +192,20 @@ i8259@19000 {
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <8000>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 40000 3b 1
a800 0 0 2 40000 3b 1
a800 0 0 3 40000 3b 1
a800 0 0 4 40000 3b 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
......@@ -228,8 +219,7 @@ a800 0 0 3 40000 3b 1
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8560ads.dts
View file @ 5c56f466
......@@ -12,16 +12,14 @@
/ {
model = "MPC8560ADS";
compatible = "MPC85xxADS";
compatible = "MPC8560ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8560@0 {
device_type = "cpu";
......@@ -34,14 +32,11 @@ PowerPC,8560@0 {
bus-frequency = <13ab6680>;
clock-frequency = <312c8040>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
......@@ -58,33 +53,28 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -98,8 +88,8 @@ ethernet@24000 {
reg = <24000 1000>;
address = [ 00 00 0C 00 00 FD ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -111,12 +101,11 @@ ethernet@25000 {
reg = <25000 1000>;
address = [ 00 00 0C 00 01 FD ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
pci@8000 {
linux,phandle = <8000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
......@@ -128,96 +117,94 @@ pci@8000 {
interrupt-map = <
/* IDSEL 0x2 */
1000 0 0 1 40000 31 1
1000 0 0 2 40000 32 1
1000 0 0 3 40000 33 1
1000 0 0 4 40000 34 1
1000 0 0 1 &mpic 31 1
1000 0 0 2 &mpic 32 1
1000 0 0 3 &mpic 33 1
1000 0 0 4 &mpic 34 1
/* IDSEL 0x3 */
1800 0 0 1 40000 34 1
1800 0 0 2 40000 31 1
1800 0 0 3 40000 32 1
1800 0 0 4 40000 33 1
1800 0 0 1 &mpic 34 1
1800 0 0 2 &mpic 31 1
1800 0 0 3 &mpic 32 1
1800 0 0 4 &mpic 33 1
/* IDSEL 0x4 */
2000 0 0 1 40000 33 1
2000 0 0 2 40000 34 1
2000 0 0 3 40000 31 1
2000 0 0 4 40000 32 1
2000 0 0 1 &mpic 33 1
2000 0 0 2 &mpic 34 1
2000 0 0 3 &mpic 31 1
2000 0 0 4 &mpic 32 1
/* IDSEL 0x5 */
2800 0 0 1 40000 32 1
2800 0 0 2 40000 33 1
2800 0 0 3 40000 34 1
2800 0 0 4 40000 31 1
2800 0 0 1 &mpic 32 1
2800 0 0 2 &mpic 33 1
2800 0 0 3 &mpic 34 1
2800 0 0 4 &mpic 31 1
/* IDSEL 12 */
6000 0 0 1 40000 31 1
6000 0 0 2 40000 32 1
6000 0 0 3 40000 33 1
6000 0 0 4 40000 34 1
6000 0 0 1 &mpic 31 1
6000 0 0 2 &mpic 32 1
6000 0 0 3 &mpic 33 1
6000 0 0 4 &mpic 34 1
/* IDSEL 13 */
6800 0 0 1 40000 34 1
6800 0 0 2 40000 31 1
6800 0 0 3 40000 32 1
6800 0 0 4 40000 33 1
6800 0 0 1 &mpic 34 1
6800 0 0 2 &mpic 31 1
6800 0 0 3 &mpic 32 1
6800 0 0 4 &mpic 33 1
/* IDSEL 14*/
7000 0 0 1 40000 33 1
7000 0 0 2 40000 34 1
7000 0 0 3 40000 31 1
7000 0 0 4 40000 32 1
7000 0 0 1 &mpic 33 1
7000 0 0 2 &mpic 34 1
7000 0 0 3 &mpic 31 1
7000 0 0 4 &mpic 32 1
/* IDSEL 15 */
7800 0 0 1 40000 32 1
7800 0 0 2 40000 33 1
7800 0 0 3 40000 34 1
7800 0 0 4 40000 31 1
7800 0 0 1 &mpic 32 1
7800 0 0 2 &mpic 33 1
7800 0 0 3 &mpic 34 1
7800 0 0 4 &mpic 31 1
/* IDSEL 18 */
9000 0 0 1 40000 31 1
9000 0 0 2 40000 32 1
9000 0 0 3 40000 33 1
9000 0 0 4 40000 34 1
9000 0 0 1 &mpic 31 1
9000 0 0 2 &mpic 32 1
9000 0 0 3 &mpic 33 1
9000 0 0 4 &mpic 34 1
/* IDSEL 19 */
9800 0 0 1 40000 34 1
9800 0 0 2 40000 31 1
9800 0 0 3 40000 32 1
9800 0 0 4 40000 33 1
9800 0 0 1 &mpic 34 1
9800 0 0 2 &mpic 31 1
9800 0 0 3 &mpic 32 1
9800 0 0 4 &mpic 33 1
/* IDSEL 20 */
a000 0 0 1 40000 33 1
a000 0 0 2 40000 34 1
a000 0 0 3 40000 31 1
a000 0 0 4 40000 32 1
a000 0 0 1 &mpic 33 1
a000 0 0 2 &mpic 34 1
a000 0 0 3 &mpic 31 1
a000 0 0 4 &mpic 32 1
/* IDSEL 21 */
a800 0 0 1 40000 32 1
a800 0 0 2 40000 33 1
a800 0 0 3 40000 34 1
a800 0 0 4 40000 31 1>;
a800 0 0 1 &mpic 32 1
a800 0 0 2 &mpic 33 1
a800 0 0 3 &mpic 34 1
a800 0 0 4 &mpic 31 1>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
interrupts = <8 0>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 01000000>;
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 20100>;
reg = <40000 40000>;
built-in;
device_type = "open-pic";
};
cpm@e0000000 {
linux,phandle = <e0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
......@@ -228,13 +215,12 @@ cpm@e0000000 {
command-proc = <919c0>;
brg-frequency = <9d5b340>;
pic@90c00 {
linux,phandle = <90c00>;
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <1e 0>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
reg = <90c00 80>;
built-in;
device_type = "cpm-pic";
......@@ -251,7 +237,7 @@ scc@91a00 {
tx-clock = <1>;
current-speed = <1c200>;
interrupts = <28 8>;
interrupt-parent = <90c00>;
interrupt-parent = <&cpmpic>;
};
scc@91a20 {
......@@ -265,7 +251,7 @@ scc@91a20 {
tx-clock = <2>;
current-speed = <1c200>;
interrupts = <29 8>;
interrupt-parent = <90c00>;
interrupt-parent = <&cpmpic>;
};
fcc@91320 {
......@@ -279,8 +265,8 @@ fcc@91320 {
rx-clock = <15>;
tx-clock = <16>;
interrupts = <21 8>;
interrupt-parent = <90c00>;
phy-handle = <2452002>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
fcc@91340 {
......@@ -294,8 +280,8 @@ fcc@91340 {
rx-clock = <17>;
tx-clock = <18>;
interrupts = <22 8>;
interrupt-parent = <90c00>;
phy-handle = <2452003>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
};
};
......
arch/powerpc/boot/dts/mpc8568mds.dts
View file @ 5c56f466
......@@ -16,16 +16,14 @@
/ {
model = "MPC8568EMDS";
compatible = "MPC85xxMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8568@0 {
device_type = "cpu";
......@@ -38,13 +36,11 @@ PowerPC,8568@0 {
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
......@@ -67,7 +63,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -76,7 +72,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -86,32 +82,26 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -127,8 +117,8 @@ ethernet@24000 {
reg = <24000 1000>;
mac-address = [ 00 00 00 00 00 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
ethernet@25000 {
......@@ -140,8 +130,8 @@ ethernet@25000 {
reg = <25000 1000>;
mac-address = [ 00 00 00 00 00 00];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452003>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial@4500 {
......@@ -150,7 +140,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -159,7 +149,7 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
......@@ -168,15 +158,14 @@ crypto@30000 {
compatible = "talitos";
reg = <30000 f000>;
interrupts = <1d 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <000000fe>;
descriptor-types-mask = <012b0ebf>;
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......@@ -192,8 +181,7 @@ par_io@e0100 {
device_type = "par_io";
num-ports = <7>;
ucc_pin@01 {
linux,phandle = <e010001>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
4 0a 1 0 2 0 /* TxD0 */
......@@ -220,8 +208,7 @@ ucc_pin@01 {
4 13 1 0 2 0 /* GTX_CLK */
1 1f 2 0 3 0>; /* GTX125 */
};
ucc_pin@02 {
linux,phandle = <e010002>;
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
5 0a 1 0 2 0 /* TxD0 */
......@@ -277,7 +264,7 @@ spi@4c0 {
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
......@@ -286,7 +273,7 @@ spi@500 {
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
......@@ -297,12 +284,12 @@ ucc@2000 {
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <212000>;
pio-handle = <e010001>;
phy-handle = <&qe_phy0>;
pio-handle = <&pio1>;
};
ucc@3000 {
......@@ -312,12 +299,12 @@ ucc@3000 {
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <212001>;
pio-handle = <e010002>;
phy-handle = <&qe_phy1>;
pio-handle = <&pio2>;
};
mdio@2120 {
......@@ -329,33 +316,29 @@ mdio@2120 {
/* These are the same PHYs as on
* gianfar's MDIO bus */
ethernet-phy@00 {
linux,phandle = <212000>;
interrupt-parent = <40000>;
qe_phy0: ethernet-phy@00 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy@01 {
linux,phandle = <212001>;
interrupt-parent = <40000>;
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
ethernet-phy@02 {
linux,phandle = <212002>;
interrupt-parent = <40000>;
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy@03 {
linux,phandle = <212003>;
interrupt-parent = <40000>;
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -363,8 +346,7 @@ ethernet-phy@03 {
};
};
qeic@80 {
linux,phandle = <80>;
qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
......@@ -373,7 +355,7 @@ qeic@80 {
built-in;
big-endian;
interrupts = <1e 2 1e 2>; //high:30 low:30
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
};
......
arch/powerpc/boot/dts/mpc8641_hpcn.dts
View file @ 5c56f466
......@@ -32,7 +32,6 @@ PowerPC,8641@0 {
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
32-bit;
linux,boot-cpu;
};
PowerPC,8641@1 {
device_type = "cpu";
......@@ -67,7 +66,7 @@ i2c@3000 {
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -76,7 +75,7 @@ i2c@3100 {
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <2b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -86,31 +85,26 @@ mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -126,8 +120,8 @@ ethernet@24000 {
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <1d 2 1e 2 22 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -139,8 +133,8 @@ ethernet@25000 {
reg = <25000 1000>;
mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <23 2 24 2 28 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
ethernet@26000 {
......@@ -152,8 +146,8 @@ ethernet@26000 {
reg = <26000 1000>;
mac-address = [ 00 E0 0C 00 02 FD ];
interrupts = <1F 2 20 2 21 2>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
ethernet@27000 {
......@@ -165,8 +159,8 @@ ethernet@27000 {
reg = <27000 1000>;
mac-address = [ 00 E0 0C 00 03 FD ];
interrupts = <25 2 26 2 27 2>;
interrupt-parent = <40000>;
phy-handle = <2452003>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial@4500 {
device_type = "serial";
......@@ -174,7 +168,7 @@ serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -183,7 +177,7 @@ serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <1c 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
......@@ -197,103 +191,102 @@ pci@8000 {
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 4d0 3 2
8800 0 0 2 4d0 4 2
8800 0 0 3 4d0 5 2
8800 0 0 4 4d0 6 2
8800 0 0 1 &i8259 3 2
8800 0 0 2 &i8259 4 2
8800 0 0 3 &i8259 5 2
8800 0 0 4 &i8259 6 2
/* IDSEL 0x12 */
9000 0 0 1 4d0 4 2
9000 0 0 2 4d0 5 2
9000 0 0 3 4d0 6 2
9000 0 0 4 4d0 3 2
9000 0 0 1 &i8259 4 2
9000 0 0 2 &i8259 5 2
9000 0 0 3 &i8259 6 2
9000 0 0 4 &i8259 3 2
/* IDSEL 0x13 */
9800 0 0 1 4d0 0 0
9800 0 0 2 4d0 0 0
9800 0 0 3 4d0 0 0
9800 0 0 4 4d0 0 0
9800 0 0 1 &i8259 0 0
9800 0 0 2 &i8259 0 0
9800 0 0 3 &i8259 0 0
9800 0 0 4 &i8259 0 0
/* IDSEL 0x14 */
a000 0 0 1 4d0 0 0
a000 0 0 2 4d0 0 0
a000 0 0 3 4d0 0 0
a000 0 0 4 4d0 0 0
a000 0 0 1 &i8259 0 0
a000 0 0 2 &i8259 0 0
a000 0 0 3 &i8259 0 0
a000 0 0 4 &i8259 0 0
/* IDSEL 0x15 */
a800 0 0 1 4d0 0 0
a800 0 0 2 4d0 0 0
a800 0 0 3 4d0 0 0
a800 0 0 4 4d0 0 0
a800 0 0 1 &i8259 0 0
a800 0 0 2 &i8259 0 0
a800 0 0 3 &i8259 0 0
a800 0 0 4 &i8259 0 0
/* IDSEL 0x16 */
b000 0 0 1 4d0 0 0
b000 0 0 2 4d0 0 0
b000 0 0 3 4d0 0 0
b000 0 0 4 4d0 0 0
b000 0 0 1 &i8259 0 0
b000 0 0 2 &i8259 0 0
b000 0 0 3 &i8259 0 0
b000 0 0 4 &i8259 0 0
/* IDSEL 0x17 */
b800 0 0 1 4d0 0 0
b800 0 0 2 4d0 0 0
b800 0 0 3 4d0 0 0
b800 0 0 4 4d0 0 0
b800 0 0 1 &i8259 0 0
b800 0 0 2 &i8259 0 0
b800 0 0 3 &i8259 0 0
b800 0 0 4 &i8259 0 0
/* IDSEL 0x18 */
c000 0 0 1 4d0 0 0
c000 0 0 2 4d0 0 0
c000 0 0 3 4d0 0 0
c000 0 0 4 4d0 0 0
c000 0 0 1 &i8259 0 0
c000 0 0 2 &i8259 0 0
c000 0 0 3 &i8259 0 0
c000 0 0 4 &i8259 0 0
/* IDSEL 0x19 */
c800 0 0 1 4d0 0 0
c800 0 0 2 4d0 0 0
c800 0 0 3 4d0 0 0
c800 0 0 4 4d0 0 0
c800 0 0 1 &i8259 0 0
c800 0 0 2 &i8259 0 0
c800 0 0 3 &i8259 0 0
c800 0 0 4 &i8259 0 0
/* IDSEL 0x1a */
d000 0 0 1 4d0 6 2
d000 0 0 2 4d0 3 2
d000 0 0 3 4d0 4 2
d000 0 0 4 4d0 5 2
d000 0 0 1 &i8259 6 2
d000 0 0 2 &i8259 3 2
d000 0 0 3 &i8259 4 2
d000 0 0 4 &i8259 5 2
/* IDSEL 0x1b */
d800 0 0 1 4d0 5 2
d800 0 0 2 4d0 0 0
d800 0 0 3 4d0 0 0
d800 0 0 4 4d0 0 0
d800 0 0 1 &i8259 5 2
d800 0 0 2 &i8259 0 0
d800 0 0 3 &i8259 0 0
d800 0 0 4 &i8259 0 0
/* IDSEL 0x1c */
e000 0 0 1 4d0 9 2
e000 0 0 2 4d0 a 2
e000 0 0 3 4d0 c 2
e000 0 0 4 4d0 7 2
e000 0 0 1 &i8259 9 2
e000 0 0 2 &i8259 a 2
e000 0 0 3 &i8259 c 2
e000 0 0 4 &i8259 7 2
/* IDSEL 0x1d */
e800 0 0 1 4d0 9 2
e800 0 0 2 4d0 a 2
e800 0 0 3 4d0 b 2
e800 0 0 4 4d0 0 0
e800 0 0 1 &i8259 9 2
e800 0 0 2 &i8259 a 2
e800 0 0 3 &i8259 b 2
e800 0 0 4 &i8259 0 0
/* IDSEL 0x1e */
f000 0 0 1 4d0 c 2
f000 0 0 2 4d0 0 0
f000 0 0 3 4d0 0 0
f000 0 0 4 4d0 0 0
f000 0 0 1 &i8259 c 2
f000 0 0 2 &i8259 0 0
f000 0 0 3 &i8259 0 0
f000 0 0 4 &i8259 0 0
/* IDSEL 0x1f */
f800 0 0 1 4d0 6 2
f800 0 0 2 4d0 0 0
f800 0 0 3 4d0 0 0
f800 0 0 4 4d0 0 0
f800 0 0 1 &i8259 6 2
f800 0 0 2 &i8259 0 0
f800 0 0 3 &i8259 0 0
f800 0 0 4 &i8259 0 0
>;
i8259@4d0 {
linux,phandle = <4d0>;
i8259: i8259@4d0 {
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
......@@ -303,12 +296,11 @@ i8259@4d0 {
compatible = "chrp,iic";
big-endian;
interrupts = <49 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......@@ -318,22 +310,6 @@ pic@40000 {
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
interrupts = <
10 2 11 2 12 2 13 2
14 2 15 2 16 2 17 2
18 2 19 2 1a 2 1b 2
1c 2 1d 2 1e 2 1f 2
20 2 21 2 22 2 23 2
24 2 25 2 26 2 27 2
28 2 29 2 2a 2 2b 2
2c 2 2d 2 2e 2 2f 2
30 2 31 2 32 2 33 2
34 2 35 2 36 2 37 2
38 2 39 2 2a 2 3b 2
3c 2 3d 2 3e 2 3f 2
48 1 49 2 4a 1
>;
interrupt-parent = <40000>;
};
};
};
arch/powerpc/boot/dts/mpc866ads.dts
View file @ 5c56f466
......@@ -37,7 +37,6 @@ PowerPC,866@0 {
interrupts = <f 2>; // decrementer interrupt
interrupt-parent = <ff000000>;
linux,phandle = <201>;
linux,boot-cpu;
};
};
......
arch/powerpc/boot/dts/mpc885ads.dts
View file @ 5c56f466
......@@ -37,7 +37,6 @@ PowerPC,885@0 {
interrupts = <f 2>; // decrementer interrupt
interrupt-parent = <ff000000>;
linux,phandle = <201>;
linux,boot-cpu;
};
};
......
arch/powerpc/configs/cell_defconfig
View file @ 5c56f466
......@@ -147,6 +147,7 @@ CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
......
arch/powerpc/configs/mpc8360emds_defconfig → arch/powerpc/configs/mpc836x_mds_defconfig
View file @ 5c56f466
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Fri Jan 26 00:19:45 2007
# Linux kernel version: 2.6.20
# Sat Feb 17 10:09:26 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
......@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
......@@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
......@@ -129,10 +130,11 @@ CONFIG_PPC_GEN550=y
#
# Platform support
#
# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC834x_SYS is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC8360E_PB=y
CONFIG_MPC836x_MDS=y
CONFIG_PPC_MPC836x=y
# CONFIG_MPIC is not set
......@@ -162,6 +164,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
......@@ -171,6 +174,7 @@ CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
......@@ -219,6 +223,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
......@@ -528,6 +533,7 @@ CONFIG_UCC_GETH=y
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
......@@ -620,6 +626,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -690,6 +697,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
......@@ -804,6 +812,7 @@ CONFIG_FIRMWARE_EDID=y
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
......@@ -867,6 +876,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
......@@ -1011,7 +1024,8 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
......@@ -1060,8 +1074,10 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
......@@ -1075,6 +1091,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
......
arch/powerpc/configs/mpc8568mds_defconfig
View file @ 5c56f466
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Wed Feb 7 23:54:25 2007
# Linux kernel version: 2.6.20
# Sat Feb 17 16:26:53 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
......@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
......@@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
......@@ -130,7 +131,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC8568_MDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC85xx=y
CONFIG_PPC_INDIRECT_PCI_BE=y
CONFIG_MPIC=y
......@@ -162,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
......@@ -171,6 +173,7 @@ CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
......@@ -216,6 +219,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
......@@ -301,6 +305,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
......@@ -341,7 +346,6 @@ CONFIG_BLK_DEV_INITRD=y
#
# Misc devices
#
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -543,6 +547,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -698,6 +703,7 @@ CONFIG_FIRMWARE_EDID=y
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
......@@ -759,6 +765,10 @@ CONFIG_HID=y
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
......@@ -896,7 +906,8 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
......@@ -914,6 +925,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
......@@ -922,7 +934,6 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
......@@ -932,6 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
......@@ -943,6 +956,8 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
#
# Security options
......@@ -970,8 +985,10 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
......@@ -985,6 +1002,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
......
arch/powerpc/configs/ppc64_defconfig
View file @ 5c56f466
......@@ -500,7 +500,7 @@ CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
......@@ -646,7 +646,7 @@ CONFIG_SATA_SVW=y
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_WINBOND=y
#
# Multi-device support (RAID and LVM)
......
arch/powerpc/configs/pseries_defconfig
View file @ 5c56f466
......@@ -483,7 +483,7 @@ CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
......@@ -628,7 +628,7 @@ CONFIG_ATA=y
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_WINBOND=y
#
# Multi-device support (RAID and LVM)
......
arch/powerpc/kernel/prom.c
View file @ 5c56f466
......@@ -1599,6 +1599,7 @@ struct property *of_find_property(const struct device_node *np,
return pp;
}
EXPORT_SYMBOL(of_find_property);
/*
* Find a property with a given name for a given node
......
arch/powerpc/kernel/prom_parse.c
View file @ 5c56f466
......@@ -5,6 +5,7 @@
#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
......@@ -1003,3 +1004,42 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
return res;
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
/**
* Search the device tree for the best MAC address to use. 'mac-address' is
* checked first, because that is supposed to contain to "most recent" MAC
* address. If that isn't set, then 'local-mac-address' is checked next,
* because that is the default address. If that isn't set, then the obsolete
* 'address' is checked, just in case we're using an old device tree.
*
* Note that the 'address' property is supposed to contain a virtual address of
* the register set, but some DTS files have redefined that property to be the
* MAC address.
*
* All-zero MAC addresses are rejected, because those could be properties that
* exist in the device tree, but were not set by U-Boot. For example, the
* DTS could define 'mac-address' and 'local-mac-address', with zero MAC
* addresses. Some older U-Boots only initialized 'local-mac-address'. In
* this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
* but is all zeros.
*/
const void *of_get_mac_address(struct device_node *np)
{
struct property *pp;
pp = of_find_property(np, "mac-address", NULL);
if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
return pp->value;
pp = of_find_property(np, "local-mac-address", NULL);
if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
return pp->value;
pp = of_find_property(np, "address", NULL);
if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
return pp->value;
return NULL;
}
EXPORT_SYMBOL(of_get_mac_address);
arch/powerpc/mm/pgtable_64.c
View file @ 5c56f466
......@@ -103,7 +103,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
*
*/
if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags,
mmu_virtual_psize)) {
mmu_io_psize)) {
printk(KERN_ERR "Failed to do bolted mapping IO "
"memory at %016lx !\n", pa);
return -ENOMEM;
......
arch/powerpc/platforms/83xx/Kconfig
View file @ 5c56f466
......@@ -38,12 +38,12 @@ config MPC834x_ITX
Be aware that PCI initialization is the bootloader's
responsibility.
config MPC8360E_PB
bool "Freescale MPC8360E PB"
config MPC836x_MDS
bool "Freescale MPC836x MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
help
This option enables support for the MPC836x EMDS Processor Board.
This option enables support for the MPC836x MDS Processor Board.
endchoice
......@@ -69,6 +69,6 @@ config PPC_MPC836x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC8360E_PB
default y if MPC836x_MDS
endmenu
arch/powerpc/platforms/83xx/Makefile
View file @ 5c56f466
......@@ -6,5 +6,5 @@ obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
arch/powerpc/platforms/83xx/mpc8313_rdb.c
View file @ 5c56f466
......@@ -74,16 +74,9 @@ void __init mpc8313_rdb_init_IRQ(void)
*/
static int __init mpc8313_rdb_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8313ERDB"))
return 0;
unsigned long root = of_get_flat_dt_root();
DBG("MPC8313 RDB found\n");
return 1;
return of_flat_dt_is_compatible(root, "MPC8313ERDB");
}
define_machine(mpc8313_rdb) {
......
arch/powerpc/platforms/83xx/mpc832x_mds.c
View file @ 5c56f466
......@@ -57,11 +57,6 @@ unsigned long isa_mem_base = 0;
static u8 *bcsr_regs = NULL;
u8 *get_bcsr(void)
{
return bcsr_regs;
}
/* ************************************************************************
*
* Setup the architecture
......@@ -74,17 +69,6 @@ static void __init mpc832x_sys_setup_arch(void)
if (ppc_md.progress)
ppc_md.progress("mpc832x_sys_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
unsigned int *fp =
(int *)get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != 0) {
......@@ -121,34 +105,23 @@ static void __init mpc832x_sys_setup_arch(void)
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{},
};
static int __init mpc832x_declare_of_platform_devices(void)
{
struct device_node *np;
for (np = NULL; (np = of_find_compatible_node(np, "network",
"ucc_geth")) != NULL;) {
int ucc_num;
char bus_id[BUS_ID_SIZE];
if (!machine_is(mpc832x_mds))
return 0;
ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
of_platform_device_create(np, bus_id, NULL);
}
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
return 0;
}
......@@ -156,7 +129,6 @@ device_initcall(mpc832x_declare_of_platform_devices);
static void __init mpc832x_sys_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
......@@ -189,6 +161,9 @@ static int __init mpc832x_rtc_hookup(void)
{
struct timespec tv;
if (!machine_is(mpc832x_mds))
return 0;
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
......@@ -207,17 +182,9 @@ late_initcall(mpc832x_rtc_hookup);
*/
static int __init mpc832x_sys_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8323EMDS"))
return 0;
DBG("%s found\n", model);
unsigned long root = of_get_flat_dt_root();
return 1;
return of_flat_dt_is_compatible(root, "MPC832xMDS");
}
define_machine(mpc832x_mds) {
......
arch/powerpc/platforms/83xx/mpc834x_itx.c
View file @ 5c56f466
......@@ -55,28 +55,12 @@ static void __init mpc834x_itx_setup_arch(void)
if (ppc_md.progress)
ppc_md.progress("mpc834x_itx_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
const unsigned int *fp =
get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
static void __init mpc834x_itx_init_IRQ(void)
......@@ -100,10 +84,9 @@ static void __init mpc834x_itx_init_IRQ(void)
*/
static int __init mpc834x_itx_probe(void)
{
/* We always match for now, eventually we should look at the flat
dev tree to ensure this is the board we are suppose to run on
*/
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC834xMITX");
}
define_machine(mpc834x_itx) {
......
arch/powerpc/platforms/83xx/mpc834x_mds.c
View file @ 5c56f466
......@@ -125,17 +125,6 @@ static void __init mpc834x_mds_setup_arch(void)
if (ppc_md.progress)
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
const unsigned int *fp =
get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
......@@ -144,12 +133,6 @@ static void __init mpc834x_mds_setup_arch(void)
#endif
mpc834x_usb_cfg();
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
static void __init mpc834x_mds_init_IRQ(void)
......@@ -176,6 +159,9 @@ static int __init mpc834x_rtc_hookup(void)
{
struct timespec tv;
if (!machine_is(mpc834x_mds))
return 0;
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
......@@ -194,10 +180,9 @@ late_initcall(mpc834x_rtc_hookup);
*/
static int __init mpc834x_mds_probe(void)
{
/* We always match for now, eventually we should look at the flat
dev tree to ensure this is the board we are suppose to run on
*/
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC834xMDS");
}
define_machine(mpc834x_mds) {
......
arch/powerpc/platforms/83xx/mpc8360e_pb.c → arch/powerpc/platforms/83xx/mpc836x_mds.c
View file @ 5c56f466
......@@ -5,7 +5,7 @@
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC8360E MDS PB board specific routines.
* MPC8360E MDS board specific routines.
*
* Changelog:
* Jun 21, 2006 Initial version
......@@ -62,33 +62,17 @@ unsigned long isa_mem_base = 0;
static u8 *bcsr_regs = NULL;
u8 *get_bcsr(void)
{
return bcsr_regs;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc8360_sys_setup_arch(void)
static void __init mpc836x_mds_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc8360_sys_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
const unsigned int *fp =
get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
ppc_md.progress("mpc836x_mds_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
......@@ -128,40 +112,29 @@ static void __init mpc8360_sys_setup_arch(void)
}
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
static int __init mpc8360_declare_of_platform_devices(void)
{
struct device_node *np;
static struct of_device_id mpc836x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{},
};
for (np = NULL; (np = of_find_compatible_node(np, "network",
"ucc_geth")) != NULL;) {
int ucc_num;
char bus_id[BUS_ID_SIZE];
static int __init mpc836x_declare_of_platform_devices(void)
{
if (!machine_is(mpc836x_mds))
return 0;
ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
of_platform_device_create(np, bus_id, NULL);
}
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc836x_ids, NULL);
return 0;
}
device_initcall(mpc8360_declare_of_platform_devices);
device_initcall(mpc836x_declare_of_platform_devices);
static void __init mpc8360_sys_init_IRQ(void)
static void __init mpc836x_mds_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
......@@ -194,6 +167,9 @@ static int __init mpc8360_rtc_hookup(void)
{
struct timespec tv;
if (!machine_is(mpc836x_mds))
return 0;
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
......@@ -210,25 +186,18 @@ late_initcall(mpc8360_rtc_hookup);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc8360_sys_probe(void)
static int __init mpc836x_mds_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8360EPB"))
return 0;
DBG("MPC8360EMDS-PB found\n");
unsigned long root = of_get_flat_dt_root();
return 1;
return of_flat_dt_is_compatible(root, "MPC836xMDS");
}
define_machine(mpc8360_sys) {
.name = "MPC8360E PB",
.probe = mpc8360_sys_probe,
.setup_arch = mpc8360_sys_setup_arch,
.init_IRQ = mpc8360_sys_init_IRQ,
define_machine(mpc836x_mds) {
.name = "MPC836x MDS",
.probe = mpc836x_mds_probe,
.setup_arch = mpc836x_mds_setup_arch,
.init_IRQ = mpc836x_mds_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
......
arch/powerpc/platforms/85xx/Kconfig
View file @ 5c56f466
......@@ -23,12 +23,12 @@ config MPC85xx_CDS
help
This option enables support for the MPC85xx CDS board
config MPC8568_MDS
bool "Freescale MPC8568 MDS"
config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
# select QUICC_ENGINE
help
This option enables support for the MPC8568 MDS board
This option enables support for the MPC85xx MDS board
endchoice
......@@ -47,7 +47,7 @@ config MPC85xx
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS
config PPC_INDIRECT_PCI_BE
bool
......
arch/powerpc/platforms/85xx/Makefile
View file @ 5c56f466
......@@ -5,4 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
arch/powerpc/platforms/85xx/mpc85xx_ads.c
View file @ 5c56f466
......@@ -17,7 +17,6 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/time.h>
......@@ -245,12 +244,6 @@ static void __init mpc85xx_ads_setup_arch(void)
add_bridge(np);
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
......@@ -279,10 +272,9 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
*/
static int __init mpc85xx_ads_probe(void)
{
/* We always match for now, eventually we should look at the flat
dev tree to ensure this is the board we are suppose to run on
*/
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC85xxADS");
}
define_machine(mpc85xx_ads) {
......
arch/powerpc/platforms/85xx/mpc85xx_cds.c
View file @ 5c56f466
......@@ -22,7 +22,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
......@@ -263,12 +262,6 @@ static void __init mpc85xx_cds_setup_arch(void)
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
......@@ -298,11 +291,9 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
*/
static int __init mpc85xx_cds_probe(void)
{
/* We always match for now, eventually we should look at
* the flat dev tree to ensure this is the board we are
* supposed to run on
*/
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC85xxCDS");
}
define_machine(mpc85xx_cds) {
......
arch/powerpc/platforms/85xx/mpc8568_mds.c → arch/powerpc/platforms/85xx/mpc85xx_mds.c
View file @ 5c56f466
......@@ -8,7 +8,7 @@
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC8568E MDS PB board specific routines.
* MPC85xx MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -27,7 +27,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
......@@ -70,14 +69,13 @@ unsigned long isa_mem_base = 0;
* Setup the architecture
*
*/
static void __init mpc8568_mds_setup_arch(void)
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
static u8 *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc8568_mds_setup_arch()", 0);
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != NULL) {
......@@ -145,26 +143,26 @@ static void __init mpc8568_mds_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
static struct of_device_id mpc8568_ids[] = {
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{},
};
static int __init mpc8568_publish_devices(void)
static int __init mpc85xx_publish_devices(void)
{
if (!machine_is(mpc8568_mds))
if (!machine_is(mpc85xx_mds))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL,mpc8568_ids,NULL);
of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
return 0;
}
device_initcall(mpc8568_publish_devices);
device_initcall(mpc85xx_publish_devices);
static void __init mpc8568_mds_pic_init(void)
static void __init mpc85xx_mds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
......@@ -207,7 +205,6 @@ static void __init mpc8568_mds_pic_init(void)
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
......@@ -218,27 +215,18 @@ static void __init mpc8568_mds_pic_init(void)
#endif /* CONFIG_QUICC_ENGINE */
}
static int __init mpc8568_mds_probe(void)
static int __init mpc85xx_mds_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8568EMDS"))
return 0;
DBG("MPC8568EMDS found\n");
unsigned long root = of_get_flat_dt_root();
return 1;
return of_flat_dt_is_compatible(root, "MPC85xxMDS");
}
define_machine(mpc8568_mds) {
.name = "MPC8568E MDS",
.probe = mpc8568_mds_probe,
.setup_arch = mpc8568_mds_setup_arch,
.init_IRQ = mpc8568_mds_pic_init,
define_machine(mpc85xx_mds) {
.name = "MPC85xx MDS",
.probe = mpc85xx_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = mpc85xx_restart,
.calibrate_decr = generic_calibrate_decr,
......
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
View file @ 5c56f466
......@@ -18,7 +18,6 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/time.h>
......@@ -120,6 +119,8 @@ mpc86xx_hpcn_init_irq(void)
DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
i8259_init(cascade_node, 0);
of_node_put(cascade_node);
set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
#endif
}
......@@ -365,12 +366,6 @@ mpc86xx_hpcn_setup_arch(void)
printk("MPC86xx HPCN board from Freescale Semiconductor\n");
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
#ifdef CONFIG_SMP
mpc86xx_smp_init();
#endif
......
arch/powerpc/platforms/celleb/Makefile
View file @ 5c56f466
obj-y += interrupt.o iommu.o setup.o \
htab.o beat.o pci.o \
scc_epci.o hvCall.o
scc_epci.o scc_uhc.o hvCall.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PPC_UDBG_BEAT) += udbg_beat.o
obj-$(CONFIG_USB) += scc_uhc.o
obj-$(CONFIG_HAS_TXX9_SERIAL) += scc_sio.o
obj-$(CONFIG_SPU_BASE) += spu_priv1.o
arch/powerpc/platforms/celleb/setup.c
View file @ 5c56f466
......@@ -137,10 +137,12 @@ static int celleb_check_legacy_ioport(unsigned int baseport)
return -ENODEV;
}
#ifdef CONFIG_KEXEC
static void celleb_kexec_cpu_down(int crash, int secondary)
{
beatic_deinit_IRQ();
}
#endif
static struct of_device_id celleb_bus_ids[] = {
{ .type = "scc", },
......
arch/powerpc/platforms/ps3/Kconfig
View file @ 5c56f466
......@@ -62,4 +62,14 @@ config PS3_PS3AV
This support is required for graphics and sound. In
general, all users will say Y or M.
config PS3_SYS_MANAGER
bool "PS3 System Manager driver"
select PS3_VUART
default y
help
Include support for the PS3 System Manager.
This support is required for system control. In
general, all users will say Y.
endmenu
arch/powerpc/platforms/ps3/setup.c
View file @ 5c56f466
......@@ -42,6 +42,10 @@
#define DBG(fmt...) do{if(0)printk(fmt);}while(0)
#endif
#if !defined(CONFIG_SMP)
static void smp_send_stop(void) {}
#endif
int ps3_get_firmware_version(union ps3_firmware_version *v)
{
int result = lv1_get_version_info(&v->raw);
......@@ -66,22 +70,35 @@ static void ps3_power_save(void)
lv1_pause(0);
}
static void ps3_restart(char *cmd)
{
DBG("%s:%d cmd '%s'\n", __func__, __LINE__, cmd);
smp_send_stop();
ps3_sys_manager_restart(); /* never returns */
}
static void ps3_power_off(void)
{
DBG("%s:%d\n", __func__, __LINE__);
smp_send_stop();
ps3_sys_manager_power_off(); /* never returns */
}
static void ps3_panic(char *str)
{
DBG("%s:%d %s\n", __func__, __LINE__, str);
#ifdef CONFIG_SMP
smp_send_stop();
#endif
printk("\n");
printk(" System does not reboot automatically.\n");
printk(" Please press POWER button.\n");
printk("\n");
for (;;) ;
while(1);
}
static void prealloc(struct ps3_prealloc *p)
{
if (!p->size)
......@@ -219,6 +236,8 @@ define_machine(ps3) {
.get_rtc_time = ps3_get_rtc_time,
.calibrate_decr = ps3_calibrate_decr,
.progress = ps3_progress,
.restart = ps3_restart,
.power_off = ps3_power_off,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
.machine_kexec = ps3_machine_kexec,
......
arch/powerpc/platforms/pseries/Makefile
View file @ 5c56f466
......@@ -4,7 +4,7 @@ endif
obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \
setup.o iommu.o ras.o rtasd.o pci_dlpar.o \
firmware.o
firmware.o power.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
......
arch/powerpc/platforms/pseries/power.c 0 → 100644
View file @ 5c56f466
/*
* Interface for power-management for ppc64 compliant platform
*
* Manish Ahuja <mahuja@us.ibm.com>
*
* Feb 2007
*
* Copyright (C) 2007 IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
unsigned long rtas_poweron_auto; /* default and normal state is 0 */
static ssize_t auto_poweron_show(struct subsystem *subsys, char *buf)
{
return sprintf(buf, "%lu\n", rtas_poweron_auto);
}
static ssize_t
auto_poweron_store(struct subsystem *subsys, const char *buf, size_t n)
{
int ret;
unsigned long ups_restart;
ret = sscanf(buf, "%lu", &ups_restart);
if ((ret == 1) && ((ups_restart == 1) || (ups_restart == 0))){
rtas_poweron_auto = ups_restart;
return n;
}
return -EINVAL;
}
static struct subsys_attribute auto_poweron_attr = {
.attr = {
.name = __stringify(auto_poweron),
.mode = 0644,
},
.show = auto_poweron_show,
.store = auto_poweron_store,
};
#ifndef CONFIG_PM
decl_subsys(power,NULL,NULL);
static struct attribute *g[] = {
&auto_poweron_attr.attr,
NULL,
};
static struct attribute_group attr_group = {
.attrs = g,
};
static int __init pm_init(void)
{
int error = subsystem_register(&power_subsys);
if (!error)
error = sysfs_create_group(&power_subsys.kset.kobj,&attr_group);
return error;
}
core_initcall(pm_init);
#else
extern struct subsystem power_subsys;
static int __init apo_pm_init(void)
{
return (subsys_create_file(&power_subsys, &auto_poweron_attr));
}
__initcall(apo_pm_init);
#endif
arch/powerpc/platforms/pseries/pseries.h
View file @ 5c56f466
......@@ -29,8 +29,11 @@ static inline smp_init_pseries_xics(void) { };
extern void setup_kexec_cpu_down_xics(void);
extern void setup_kexec_cpu_down_mpic(void);
#else
static inline setup_kexec_cpu_down_xics(void) { };
static inline setup_kexec_cpu_down_mpic(void) { };
static inline void setup_kexec_cpu_down_xics(void) { }
static inline void setup_kexec_cpu_down_mpic(void) { }
#endif
/* Poweron flag used for enabling auto ups restart */
extern unsigned long rtas_poweron_auto;
#endif /* _PSERIES_PSERIES_H */
arch/powerpc/platforms/pseries/setup.c
View file @ 5c56f466
......@@ -486,6 +486,34 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
return PCI_PROBE_NORMAL;
}
/**
* pSeries_power_off - tell firmware about how to power off the system.
*
* This function calls either the power-off rtas token in normal cases
* or the ibm,power-off-ups token (if present & requested) in case of
* a power failure. If power-off token is used, power on will only be
* possible with power button press. If ibm,power-off-ups token is used
* it will allow auto poweron after power is restored.
*/
void pSeries_power_off(void)
{
int rc;
int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
if (rtas_flash_term_hook)
rtas_flash_term_hook(SYS_POWER_OFF);
if (rtas_poweron_auto == 0 ||
rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
printk(KERN_INFO "RTAS power-off returned %d\n", rc);
} else {
rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
}
for (;;);
}
define_machine(pseries) {
.name = "pSeries",
.probe = pSeries_probe,
......@@ -496,7 +524,7 @@ define_machine(pseries) {
.pcibios_fixup = pSeries_final_fixup,
.pci_probe_mode = pSeries_pci_probe_mode,
.restart = rtas_restart,
.power_off = rtas_power_off,
.power_off = pSeries_power_off,
.halt = rtas_halt,
.panic = rtas_os_term,
.get_boot_time = rtas_get_boot_time,
......
arch/powerpc/sysdev/Makefile
View file @ 5c56f466
......@@ -7,6 +7,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
......
arch/powerpc/sysdev/fsl_soc.c
View file @ 5c56f466
......@@ -233,14 +233,7 @@ static int __init gfar_of_init(void)
goto err;
}
mac_addr = get_property(np, "local-mac-address", NULL);
if (mac_addr == NULL)
mac_addr = get_property(np, "mac-address", NULL);
if (mac_addr == NULL) {
/* Obsolete */
mac_addr = get_property(np, "address", NULL);
}
mac_addr = of_get_mac_address(np);
if (mac_addr)
memcpy(gfar_data.mac_addr, mac_addr, 6);
......@@ -646,7 +639,8 @@ static int __init fs_enet_of_init(void)
goto unreg;
}
mac_addr = get_property(np, "mac-address", NULL);
mac_addr = of_get_mac_address(np);
if (mac_addr)
memcpy(fs_enet_data.macaddr, mac_addr, 6);
ph = get_property(np, "phy-handle", NULL);
......@@ -931,7 +925,8 @@ static int __init fs_enet_of_init(void)
goto err;
r[0].name = enet_regs;
mac_addr = (void *)get_property(np, "mac-address", NULL);
mac_addr = of_get_mac_address(np);
if (mac_addr)
memcpy(fs_enet_data.macaddr, mac_addr, 6);
ph = (phandle *) get_property(np, "phy-handle", NULL);
......
arch/powerpc/sysdev/mpic.c
View file @ 5c56f466
......@@ -1370,7 +1370,7 @@ void mpic_request_ipis(void)
printk(KERN_ERR "Failed to map IPI %d\n", i);
break;
}
request_irq(vipi, mpic_ipi_action, IRQF_DISABLED,
request_irq(vipi, mpic_ipi_action, IRQF_DISABLED|IRQF_PERCPU,
ipi_names[i], mpic);
}
}
......
arch/powerpc/sysdev/pmi.c 0 → 100644
View file @ 5c56f466
/*
* pmi driver
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* PMI (Platform Management Interrupt) is a way to communicate
* with the BMC (Baseboard Management Controller) via interrupts.
* Unlike IPMI it is bidirectional and has a low latency.
*
* Author: Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <asm/of_device.h>
#include <asm/of_platform.h>
#include <asm/io.h>
#include <asm/pmi.h>
struct pmi_data {
struct list_head handler;
spinlock_t handler_spinlock;
spinlock_t pmi_spinlock;
struct mutex msg_mutex;
pmi_message_t msg;
struct completion *completion;
struct of_device *dev;
int irq;
u8 __iomem *pmi_reg;
struct work_struct work;
};
static void __iomem *of_iomap(struct device_node *np)
{
struct resource res;
if (of_address_to_resource(np, 0, &res))
return NULL;
pr_debug("Resource start: 0x%lx\n", res.start);
pr_debug("Resource end: 0x%lx\n", res.end);
return ioremap(res.start, 1 + res.end - res.start);
}
static int pmi_irq_handler(int irq, void *dev_id)
{
struct pmi_data *data;
u8 type;
int rc;
data = dev_id;
spin_lock(&data->pmi_spinlock);
type = ioread8(data->pmi_reg + PMI_READ_TYPE);
pr_debug("pmi: got message of type %d\n", type);
if (type & PMI_ACK && !data->completion) {
printk(KERN_WARNING "pmi: got unexpected ACK message.\n");
rc = -EIO;
goto unlock;
}
if (data->completion && !(type & PMI_ACK)) {
printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type);
rc = -EIO;
goto unlock;
}
data->msg.type = type;
data->msg.data0 = ioread8(data->pmi_reg + PMI_READ_DATA0);
data->msg.data1 = ioread8(data->pmi_reg + PMI_READ_DATA1);
data->msg.data2 = ioread8(data->pmi_reg + PMI_READ_DATA2);
rc = 0;
unlock:
spin_unlock(&data->pmi_spinlock);
if (rc == -EIO) {
rc = IRQ_HANDLED;
goto out;
}
if (data->msg.type & PMI_ACK) {
complete(data->completion);
rc = IRQ_HANDLED;
goto out;
}
schedule_work(&data->work);
rc = IRQ_HANDLED;
out:
return rc;
}
static struct of_device_id pmi_match[] = {
{ .type = "ibm,pmi", .name = "ibm,pmi" },
{},
};
MODULE_DEVICE_TABLE(of, pmi_match);
static void pmi_notify_handlers(struct work_struct *work)
{
struct pmi_data *data;
struct pmi_handler *handler;
data = container_of(work, struct pmi_data, work);
spin_lock(&data->handler_spinlock);
list_for_each_entry(handler, &data->handler, node) {
pr_debug(KERN_INFO "pmi: notifying handler %p\n", handler);
if (handler->type == data->msg.type)
handler->handle_pmi_message(data->dev, data->msg);
}
spin_unlock(&data->handler_spinlock);
}
static int pmi_of_probe(struct of_device *dev,
const struct of_device_id *match)
{
struct device_node *np = dev->node;
struct pmi_data *data;
int rc;
data = kzalloc(sizeof(struct pmi_data), GFP_KERNEL);
if (!data) {
printk(KERN_ERR "pmi: could not allocate memory.\n");
rc = -ENOMEM;
goto out;
}
data->pmi_reg = of_iomap(np);
if (!data->pmi_reg) {
printk(KERN_ERR "pmi: invalid register address.\n");
rc = -EFAULT;
goto error_cleanup_data;
}
INIT_LIST_HEAD(&data->handler);
mutex_init(&data->msg_mutex);
spin_lock_init(&data->pmi_spinlock);
spin_lock_init(&data->handler_spinlock);
INIT_WORK(&data->work, pmi_notify_handlers);
dev->dev.driver_data = data;
data->dev = dev;
data->irq = irq_of_parse_and_map(np, 0);
if (data->irq == NO_IRQ) {
printk(KERN_ERR "pmi: invalid interrupt.\n");
rc = -EFAULT;
goto error_cleanup_iomap;
}
rc = request_irq(data->irq, pmi_irq_handler, 0, "pmi", data);
if (rc) {
printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n",
data->irq, rc);
goto error_cleanup_iomap;
}
printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg);
goto out;
error_cleanup_iomap:
iounmap(data->pmi_reg);
error_cleanup_data:
kfree(data);
out:
return rc;
}
static int pmi_of_remove(struct of_device *dev)
{
struct pmi_data *data;
struct pmi_handler *handler, *tmp;
data = dev->dev.driver_data;
free_irq(data->irq, data);
iounmap(data->pmi_reg);
spin_lock(&data->handler_spinlock);
list_for_each_entry_safe(handler, tmp, &data->handler, node)
list_del(&handler->node);
spin_unlock(&data->handler_spinlock);
kfree(dev->dev.driver_data);
return 0;
}
static struct of_platform_driver pmi_of_platform_driver = {
.name = "pmi",
.match_table = pmi_match,
.probe = pmi_of_probe,
.remove = pmi_of_remove
};
static int __init pmi_module_init(void)
{
return of_register_platform_driver(&pmi_of_platform_driver);
}
module_init(pmi_module_init);
static void __exit pmi_module_exit(void)
{
of_unregister_platform_driver(&pmi_of_platform_driver);
}
module_exit(pmi_module_exit);
void pmi_send_message(struct of_device *device, pmi_message_t msg)
{
struct pmi_data *data;
unsigned long flags;
DECLARE_COMPLETION_ONSTACK(completion);
data = device->dev.driver_data;
mutex_lock(&data->msg_mutex);
data->msg = msg;
pr_debug("pmi_send_message: msg is %08x\n", *(u32*)&msg);
data->completion = &completion;
spin_lock_irqsave(&data->pmi_spinlock, flags);
iowrite8(msg.data0, data->pmi_reg + PMI_WRITE_DATA0);
iowrite8(msg.data1, data->pmi_reg + PMI_WRITE_DATA1);
iowrite8(msg.data2, data->pmi_reg + PMI_WRITE_DATA2);
iowrite8(msg.type, data->pmi_reg + PMI_WRITE_TYPE);
spin_unlock_irqrestore(&data->pmi_spinlock, flags);
pr_debug("pmi_send_message: wait for completion\n");
wait_for_completion_interruptible_timeout(data->completion,
PMI_TIMEOUT);
data->completion = NULL;
mutex_unlock(&data->msg_mutex);
}
EXPORT_SYMBOL_GPL(pmi_send_message);
void pmi_register_handler(struct of_device *device,
struct pmi_handler *handler)
{
struct pmi_data *data;
data = device->dev.driver_data;
spin_lock(&data->handler_spinlock);
list_add_tail(&handler->node, &data->handler);
spin_unlock(&data->handler_spinlock);
}
EXPORT_SYMBOL_GPL(pmi_register_handler);
void pmi_unregister_handler(struct of_device *device,
struct pmi_handler *handler)
{
struct pmi_data *data;
pr_debug("pmi: unregistering handler %p\n", handler);
data = device->dev.driver_data;
spin_lock(&data->handler_spinlock);
list_del(&handler->node);
spin_unlock(&data->handler_spinlock);
}
EXPORT_SYMBOL_GPL(pmi_unregister_handler);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
MODULE_DESCRIPTION("IBM Platform Management Interrupt driver");
arch/powerpc/sysdev/qe_lib/ucc_fast.c
View file @ 5c56f466
This diff is collapsed.
arch/powerpc/sysdev/qe_lib/ucc_slow.c
View file @ 5c56f466
This diff is collapsed.
drivers/ps3/Makefile
View file @ 5c56f466
obj-$(CONFIG_PS3_VUART) += vuart.o
obj-$(CONFIG_PS3_PS3AV) += ps3av.o ps3av_cmd.o
obj-$(CONFIG_PS3_SYS_MANAGER) += sys-manager.o
drivers/ps3/sys-manager.c 0 → 100644
View file @ 5c56f466
This diff is collapsed.
drivers/ps3/vuart.c
View file @ 5c56f466
This diff is collapsed.
drivers/ps3/vuart.h
View file @ 5c56f466
......@@ -21,6 +21,44 @@
#if !defined(_PS3_VUART_H)
#define _PS3_VUART_H
#include <asm/ps3.h>
struct ps3_vuart_stats {
unsigned long bytes_written;
unsigned long bytes_read;
unsigned long tx_interrupts;
unsigned long rx_interrupts;
unsigned long disconnect_interrupts;
};
struct ps3_vuart_work {
struct work_struct work;
unsigned long trigger;
spinlock_t lock;
struct ps3_vuart_port_device* dev; /* to convert work to device */
};
/**
* struct ps3_vuart_port_priv - private vuart device data.
*/
struct ps3_vuart_port_priv {
unsigned int port_number;
u64 interrupt_mask;
struct {
spinlock_t lock;
struct list_head head;
} tx_list;
struct {
unsigned long bytes_held;
spinlock_t lock;
struct list_head head;
} rx_list;
struct ps3_vuart_stats stats;
struct ps3_vuart_work work;
};
/**
* struct ps3_vuart_port_driver - a driver for a device on a vuart port
*/
......@@ -41,10 +79,6 @@ struct ps3_vuart_port_driver {
int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv);
void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv);
int ps3_vuart_write(struct ps3_vuart_port_device *dev,
const void* buf, unsigned int bytes);
int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
unsigned int bytes);
static inline struct ps3_vuart_port_driver *to_ps3_vuart_port_driver(
struct device_driver *_drv)
{
......@@ -55,5 +89,22 @@ static inline struct ps3_vuart_port_device *to_ps3_vuart_port_device(
{
return container_of(_dev, struct ps3_vuart_port_device, core);
}
static inline struct ps3_vuart_port_device *ps3_vuart_work_to_port_device(
struct work_struct *_work)
{
struct ps3_vuart_work *vw = container_of(_work, struct ps3_vuart_work,
work);
return vw->dev;
}
int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
unsigned int bytes);
int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
unsigned int bytes);
int ps3_vuart_read_async(struct ps3_vuart_port_device *dev, work_func_t func,
unsigned int bytes);
void ps3_vuart_cancel_async(struct ps3_vuart_port_device *dev);
void ps3_vuart_clear_rx_bytes(struct ps3_vuart_port_device *dev,
unsigned int bytes);
#endif
drivers/serial/cpm_uart/cpm_uart_cpm2.c
View file @ 5c56f466
......@@ -285,7 +285,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
int __init cpm_uart_init_portdesc(void)
{
#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
u32 addr;
u16 *addr;
#endif
pr_debug("CPM uart[-]:init portdesc\n");
......
drivers/serial/mpc52xx_uart.c
View file @ 5c56f466
......@@ -995,8 +995,10 @@ mpc52xx_uart_of_remove(struct of_device *op)
struct uart_port *port = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
if (port)
if (port) {
uart_remove_one_port(&mpc52xx_uart_driver, port);
irq_dispose_mapping(port->irq);
}
return 0;
}
......
include/asm-powerpc/atomic.h
View file @ 5c56f466
......@@ -165,7 +165,8 @@ static __inline__ int atomic_dec_return(atomic_t *v)
return t;
}
#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
#define atomic_cmpxchg(v, o, n) \
((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
/**
......@@ -413,6 +414,43 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
return t;
}
#define atomic64_cmpxchg(v, o, n) \
((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
/**
* atomic64_add_unless - add unless the number is a given value
* @v: pointer of type atomic64_t
* @a: the amount to add to v...
* @u: ...unless v is equal to u.
*
* Atomically adds @a to @v, so long as it was not @u.
* Returns non-zero if @v was not @u, and zero otherwise.
*/
static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
{
long t;
__asm__ __volatile__ (
LWSYNC_ON_SMP
"1: ldarx %0,0,%1 # atomic_add_unless\n\
cmpd 0,%0,%3 \n\
beq- 2f \n\
add %0,%2,%0 \n"
" stdcx. %0,0,%1 \n\
bne- 1b \n"
ISYNC_ON_SMP
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
: "r" (&v->counter), "r" (a), "r" (u)
: "cc", "memory");
return t != u;
}
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#endif /* __powerpc64__ */
#include <asm-generic/atomic.h>
......
include/asm-powerpc/dcr-native.h
View file @ 5c56f466
......@@ -26,8 +26,8 @@ typedef struct {} dcr_host_t;
#define DCR_MAP_OK(host) (1)
#define dcr_map(dev, dcr_n, dcr_c) {}
#define dcr_unmap(host, dcr_n, dcr_c) {}
#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){})
#define dcr_unmap(host, dcr_n, dcr_c) do {} while (0)
#define dcr_read(host, dcr_n) mfdcr(dcr_n)
#define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value)
......
include/asm-powerpc/pmi.h 0 → 100644
View file @ 5c56f466
#ifndef _POWERPC_PMI_H
#define _POWERPC_PMI_H
/*
* Definitions for talking with PMI device on PowerPC
*
* PMI (Platform Management Interrupt) is a way to communicate
* with the BMC (Baseboard Management Controller) via interrupts.
* Unlike IPMI it is bidirectional and has a low latency.
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* Author: Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef __KERNEL__
#include <asm/of_device.h>
#define PMI_TYPE_FREQ_CHANGE 0x01
#define PMI_READ_TYPE 0
#define PMI_READ_DATA0 1
#define PMI_READ_DATA1 2
#define PMI_READ_DATA2 3
#define PMI_WRITE_TYPE 4
#define PMI_WRITE_DATA0 5
#define PMI_WRITE_DATA1 6
#define PMI_WRITE_DATA2 7
#define PMI_ACK 0x80
#define PMI_TIMEOUT 100
typedef struct {
u8 type;
u8 data0;
u8 data1;
u8 data2;
} pmi_message_t;
struct pmi_handler {
struct list_head node;
u8 type;
void (*handle_pmi_message) (struct of_device *, pmi_message_t);
};
void pmi_register_handler(struct of_device *, struct pmi_handler *);
void pmi_unregister_handler(struct of_device *, struct pmi_handler *);
void pmi_send_message(struct of_device *, pmi_message_t);
#endif /* __KERNEL__ */
#endif /* _POWERPC_PMI_H */
include/asm-powerpc/prom.h
View file @ 5c56f466
......@@ -255,6 +255,8 @@ extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
/* Get the MAC address */
extern const void *of_get_mac_address(struct device_node *np);
/*
* OF interrupt mapping
......
include/asm-powerpc/ps3.h
View file @ 5c56f466
This diff is collapsed.
include/asm-powerpc/ucc_slow.h
View file @ 5c56f466
......@@ -150,7 +150,7 @@ struct ucc_slow_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
struct ucc_slow *regs;
u32 regs;
int irq;
u16 uccm_mask;
int data_mem_part;
......@@ -199,9 +199,9 @@ struct ucc_slow_private {
and length for first BD in a frame */
u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
u8 *confBd; /* next BD for confirm after Tx */
u8 *tx_bd; /* next BD for new Tx request */
u8 *rx_bd; /* next BD to collect after Rx */
struct qe_bd *confBd; /* next BD for confirm after Tx */
struct qe_bd *tx_bd; /* next BD for new Tx request */
struct qe_bd *rx_bd; /* next BD to collect after Rx */
void *p_rx_frame; /* accumulating receive frame */
u16 *p_ucce; /* a pointer to the event register in memory.
*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7