Commit 5c929ee3 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Linus Torvalds

[PATCH] m68k: HP300 DIO

HP300 DIO bus updates from Kars de Jong:
  - Removed kludges for internal HPIB, no need to handle it as a DIO device
  - Removed dio_scodetoviraddr() and introduced dio_scodetophysaddr() instead,
    to be able to support DIO-II
  - Removed trailing white space
  - Changed error return code of dio_find() from 0 to -1, since select code 0
    is a valid select code
  - Added support for DIO-II
  - Fixed problem with DIO_ENCODE_ID()
Signed-off-by: default avatarKars de Jong <jongk@linux-m68k.org>
Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 94e2c131
/* Code to support devices on the DIO (and eventually DIO-II) bus
/* Code to support devices on the DIO and DIO-II bus
* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
*
* This code has basically these routines at the moment:
......@@ -9,9 +9,8 @@
* This means that framebuffers should pass it as
* DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
* (or whatever); everybody else just uses DIO_ID_FOOBAR.
* void *dio_scodetoviraddr(int scode)
* Return the virtual address corresponding to the given select code.
* NB: DIO-II devices will have to be mapped in in this routine!
* unsigned long dio_scodetophysaddr(int scode)
* Return the physical address corresponding to the given select code.
* int dio_scodetoipl(int scode)
* Every DIO card has a fixed interrupt priority level. This function
* returns it, whatever it is.
......@@ -30,8 +29,9 @@
#include <linux/dio.h>
#include <linux/slab.h> /* kmalloc() */
#include <linux/init.h>
#include <asm/hwtest.h> /* hwreg_present() */
#include <asm/uaccess.h>
#include <asm/io.h> /* readb() */
/* not a real config option yet! */
#define CONFIG_DIO_CONSTANTS
......@@ -59,7 +59,7 @@ static struct dioname names[] =
DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
DIONAME(DCM), DIONAME(DCMREM),
DIONAME(LAN),
DIONAME(FHPIB), DIONAME(NHPIB), DIONAME(IHPIB),
DIONAME(FHPIB), DIONAME(NHPIB),
DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
DIONAME(FBUFFER),
DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
......@@ -79,7 +79,7 @@ static struct dioname names[] =
#define NUMNAMES (sizeof(names) / sizeof(struct dioname))
static const char *unknowndioname
= "unknown DIO board -- please email <pmaydell@chiark.greenend.org.uk>!";
= "unknown DIO board -- please email <linux-m68k@lists.linux-m68k.org>!";
static const char *dio_getname(int id)
{
......@@ -116,41 +116,62 @@ static int __init dio_find_slow(int deviceid)
{
/* Called to find a DIO device before the full bus scan has run. Basically
* only used by the console driver.
* We don't do the primary+secondary ID encoding thing here. Maybe we should.
* (that would break the topcat detection, though. I need to think about
* the whole primary/secondary ID thing.)
*/
int scode;
u_char prid;
int scode, id;
u_char prid, secid, i;
mm_segment_t fs;
for (scode = 0; scode < DIO_SCMAX; scode++)
{
void *va;
unsigned long pa;
if (DIO_SCINHOLE(scode))
continue;
va = dio_scodetoviraddr(scode);
if (!va || !hwreg_present(va + DIO_IDOFF))
pa = dio_scodetophysaddr(scode);
if (!pa)
continue;
if (scode < DIOII_SCBASE)
va = (void *)(pa + DIO_VIRADDRBASE);
else
va = ioremap(pa, PAGE_SIZE);
fs = get_fs();
set_fs(KERNEL_DS);
if (get_user(i, (unsigned char *)va + DIO_IDOFF))
{
set_fs(fs);
if (scode >= DIOII_SCBASE)
iounmap(va);
continue; /* no board present at that select code */
}
/* We aren't very likely to want to use this to get at the IHPIB,
* but maybe it's returning the same ID as the card we do want...
*/
if (!DIO_ISIHPIB(scode))
set_fs(fs);
prid = DIO_ID(va);
if (DIO_NEEDSSECID(prid))
{
secid = DIO_SECID(va);
id = DIO_ENCODE_ID(prid, secid);
}
else
prid = DIO_ID_IHPIB;
id = prid;
if (prid == deviceid)
if (id == deviceid)
{
if (scode >= DIOII_SCBASE)
iounmap(va);
return scode;
}
return 0;
}
return -1;
}
/* Aargh: we use 0 for an error return code, but select code 0 exists!
* FIXME (trivial, use -1, but requires changes to all the drivers :-< )
*/
int dio_find(int deviceid)
{
if (blist)
......@@ -160,9 +181,12 @@ int dio_find(int deviceid)
for (b = blist; b; b = b->next)
if (b->id == deviceid && b->configured == 0)
return b->scode;
return 0;
return -1;
}
else
{
return dio_find_slow(deviceid);
}
}
/* This is the function that scans the DIO space and works out what
......@@ -172,31 +196,48 @@ static int __init dio_init(void)
{
int scode;
struct dioboard *b, *bprev = NULL;
mm_segment_t fs;
char i;
printk("Scanning for DIO devices...\n");
printk(KERN_INFO "Scanning for DIO devices...\n");
for (scode = 0; scode < DIO_SCMAX; ++scode)
{
u_char prid, secid = 0; /* primary, secondary ID bytes */
u_char *va;
unsigned long pa;
if (DIO_SCINHOLE(scode))
continue;
va = dio_scodetoviraddr(scode);
if (!va || !hwreg_present(va + DIO_IDOFF))
pa = dio_scodetophysaddr(scode);
if (!pa)
continue;
if (scode < DIOII_SCBASE)
va = (void *)(pa + DIO_VIRADDRBASE);
else
va = ioremap(pa, PAGE_SIZE);
fs = get_fs();
set_fs(KERNEL_DS);
if (get_user(i, (unsigned char *)va + DIO_IDOFF))
{
set_fs(fs);
if (scode >= DIOII_SCBASE)
iounmap(va);
continue; /* no board present at that select code */
}
set_fs(fs);
/* Found a board, allocate it an entry in the list */
b = kmalloc(sizeof(struct dioboard), GFP_KERNEL);
/* read the ID byte(s) and encode if necessary. Note workaround
* for broken internal HPIB devices...
*/
if (!DIO_ISIHPIB(scode))
/* read the ID byte(s) and encode if necessary. */
prid = DIO_ID(va);
else
prid = DIO_ID_IHPIB;
if (DIO_NEEDSSECID(prid))
{
......@@ -210,11 +251,14 @@ static int __init dio_init(void)
b->scode = scode;
b->ipl = DIO_IPL(va);
b->name = dio_getname(b->id);
printk("select code %3d: ipl %d: ID %02X", scode, b->ipl, prid);
if (DIO_NEEDSSECID(b->id))
printk(KERN_INFO "select code %3d: ipl %d: ID %02X", b->scode, b->ipl, prid);
if (DIO_NEEDSSECID(prid))
printk(":%02X", secid);
printk(": %s\n", b->name);
if (scode >= DIOII_SCBASE)
iounmap(va);
b->next = NULL;
if (bprev)
......@@ -223,29 +267,27 @@ static int __init dio_init(void)
blist = b;
bprev = b;
}
return 0;
}
subsys_initcall(dio_init);
/* Bear in mind that this is called in the very early stages of initialisation
* in order to get the virtual address of the serial port for the console...
* in order to get the address of the serial port for the console...
*/
void *dio_scodetoviraddr(int scode)
unsigned long dio_scodetophysaddr(int scode)
{
if (scode > DIOII_SCBASE)
if (scode >= DIOII_SCBASE)
{
printk("dio_scodetoviraddr: don't support DIO-II yet!\n");
return 0;
return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
}
else if (scode > DIO_SCMAX || scode < 0)
return 0;
else if (DIO_SCINHOLE(scode))
return 0;
else if (DIO_ISIHPIB(scode))
return (void*)DIO_IHPIBADDR;
return (void*)(DIO_VIRADDRBASE + DIO_BASE + scode * 0x10000);
return (DIO_BASE + scode * DIO_DEVSIZE);
}
int dio_scodetoipl(int scode)
......@@ -257,7 +299,7 @@ int dio_scodetoipl(int scode)
if (!b)
{
printk("dio_scodetoipl: bad select code %d\n", scode);
printk(KERN_ERR "dio_scodetoipl: bad select code %d\n", scode);
return 0;
}
else
......@@ -273,7 +315,7 @@ const char *dio_scodetoname(int scode)
if (!b)
{
printk("dio_scodetoname: bad select code %d\n", scode);
printk(KERN_ERR "dio_scodetoname: bad select code %d\n", scode);
return NULL;
}
else
......@@ -288,9 +330,9 @@ void dio_config_board(int scode)
break;
if (!b)
printk("dio_config_board: bad select code %d\n", scode);
printk(KERN_ERR "dio_config_board: bad select code %d\n", scode);
else if (b->configured)
printk("dio_config_board: board at select code %d already configured\n", scode);
printk(KERN_WARNING "dio_config_board: board at select code %d already configured\n", scode);
else
b->configured = 1;
}
......@@ -303,9 +345,9 @@ void dio_unconfig_board(int scode)
break;
if (!b)
printk("dio_unconfig_board: bad select code %d\n", scode);
printk(KERN_ERR "dio_unconfig_board: bad select code %d\n", scode);
else if (!b->configured)
printk("dio_unconfig_board: board at select code %d not configured\n",
printk(KERN_WARNING "dio_unconfig_board: board at select code %d not configured\n",
scode);
else
b->configured = 0;
......
......@@ -28,6 +28,9 @@
* do with ioremap() though.
*/
#ifdef __KERNEL__
#include <asm/hp300hw.h>
/* DIO/DIO-II boards all have the following 8bit registers.
* These are offsets from the base of the device.
*/
......@@ -35,26 +38,7 @@
#define DIO_IPLOFF 0x03 /* interrupt priority level */
#define DIO_SECIDOFF 0x15 /* secondary device ID */
#define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */
/* The internal HPIB device is special; this is its physaddr; its select code is 7.
* The reason why we have to treat it specially is because apparently it's broken:
* the device ID isn't consistent/reliable. *sigh*
*/
#define DIO_IHPIBADDR 0x47800
#define DIO_IHPIBSCODE 7
/* If we don't have the internal HPIB defined, then treat select code 7 like
* any other. If we *do* have internal HPIB, then we just have to assume that
* select code 7 is the internal HPIB regardless of the ID register :-<
*/
#define CONFIG_IHPIB /* hack hack : not yet a proper config option */
#ifdef CONFIG_IHPIB
#define DIO_ISIHPIB(scode) ((scode) == DIO_IHPIBSCODE)
#else
#define DIO_ISIHPIB(scode) 0
#endif
#define DIO_VIRADDRBASE 0xf0000000 /* vir addr where IOspace is mapped */
#define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */
#define DIO_BASE 0x600000 /* start of DIO space */
#define DIO_END 0x1000000 /* end of DIO space */
......@@ -67,9 +51,10 @@
/* Highest valid select code. If we add DIO-II support this should become
* 256 for everything except HP320, which only has DIO.
*/
#define DIO_SCMAX 32
#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
#define DIOII_SCBASE 132 /* lowest DIO-II select code */
#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
/* macros to read device IDs, given base address */
#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
......@@ -91,7 +76,7 @@
* In practice this is only important for framebuffers,
* and everybody else just sets ID fields equal to the DIO_ID_FOO value.
*/
#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) & ((int)pr & 0xff))
#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
/* macro to determine whether a given primary ID requires a secondary ID byte */
#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
......@@ -112,10 +97,8 @@
#define DIO_DESC_LAN "98643A LANCE ethernet"
#define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */
#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
#define DIO_ID_NHPIB 0x80 /* 98624A HP-IB (normal ie slow) */
#define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */
#define DIO_DESC_NHPIB "98624A HPIB"
#define DIO_ID_IHPIB 0x00 /* internal HPIB (not its real ID, it hasn't got one! */
#define DIO_DESC_IHPIB "internal HPIB"
#define DIO_ID_SCSI0 0x07 /* 98625A SCSI */
#define DIO_DESC_SCSI0 "98625A SCSI0"
#define DIO_ID_SCSI1 0x27 /* ditto */
......@@ -193,7 +176,7 @@
*/
extern int dio_find(int deviceid);
extern void *dio_scodetoviraddr(int scode);
extern unsigned long dio_scodetophysaddr(int scode);
extern int dio_scodetoipl(int scode);
extern const char *dio_scodetoname(int scode);
extern void dio_config_board(int scode);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment