Skip to content

L
linux
Commit 5ce0ba88 authored by Hiep Cao Minh's avatar Hiep Cao Minh Committed by Mark Brown
Browse files
Options

spi: rcar: add Renesas QSPI support on RSPI 

The R8A7790 has QSPI module which is very similar to RSPI.
This patch adds into RSPI module together to supports QSPI module.
Signed-off-by: default avatarHiep Cao Minh <cm-hiep@jinso.co.jp>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 272b98c6
Show whitespace changes
Inline Side-by-side
Showing with 145 additions and 42 deletions
drivers/spi/Kconfig
View file @ 5ce0ba88
......@@ -369,7 +369,7 @@ config SPI_PXA2XX_PCI
config SPI_RSPI
tristate "Renesas RSPI controller"
depends on SUPERH && SH_DMAE_BASE
depends on (SUPERH || ARCH_SHMOBILE) && SH_DMAE_BASE
help
SPI driver for Renesas RSPI blocks.
......
drivers/spi/spi-rspi.c
View file @ 5ce0ba88
......@@ -59,6 +59,14 @@
#define RSPI_SPCMD6 0x1c
#define RSPI_SPCMD7 0x1e
/*qspi only */
#define QSPI_SPBFCR 0x18
#define QSPI_SPBDCR 0x1a
#define QSPI_SPBMUL0 0x1c
#define QSPI_SPBMUL1 0x20
#define QSPI_SPBMUL2 0x24
#define QSPI_SPBMUL3 0x28
/* SPCR */
#define SPCR_SPRIE 0x80
#define SPCR_SPE 0x40
......@@ -126,6 +134,8 @@
#define SPCMD_LSBF 0x1000
#define SPCMD_SPB_MASK 0x0f00
#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
#define SPCMD_SPB_8BIT 0x0000 /* qspi only */
#define SPCMD_SPB_16BIT 0x0100
#define SPCMD_SPB_20BIT 0x0000
#define SPCMD_SPB_24BIT 0x0100
#define SPCMD_SPB_32BIT 0x0200
......@@ -135,6 +145,10 @@
#define SPCMD_CPOL 0x0002
#define SPCMD_CPHA 0x0001
/* SPBFCR */
#define SPBFCR_TXRST 0x80 /* qspi only */
#define SPBFCR_RXRST 0x40 /* qspi only */
struct rspi_data {
void __iomem *addr;
u32 max_speed_hz;
......@@ -145,6 +159,7 @@ struct rspi_data {
spinlock_t lock;
struct clk *clk;
unsigned char spsr;
const struct spi_ops *ops;
/* for dmaengine */
struct dma_chan *chan_tx;
......@@ -165,6 +180,11 @@ static void rspi_write16(struct rspi_data *rspi, u16 data, u16 offset)
iowrite16(data, rspi->addr + offset);
}
static void rspi_write32(struct rspi_data *rspi, u32 data, u16 offset)
{
iowrite32(data, rspi->addr + offset);
}
static u8 rspi_read8(struct rspi_data *rspi, u16 offset)
{
return ioread8(rspi->addr + offset);
......@@ -175,17 +195,98 @@ static u16 rspi_read16(struct rspi_data *rspi, u16 offset)
return ioread16(rspi->addr + offset);
}
static unsigned char rspi_calc_spbr(struct rspi_data *rspi)
/* optional functions */
struct spi_ops {
int (*set_config_register)(struct rspi_data *rspi, int access_size);
};
/*
* functions for RSPI
*/
static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
{
int tmp;
unsigned char spbr;
int spbr;
/* Sets output mode(CMOS) and MOSI signal(from previous transfer) */
rspi_write8(rspi, 0x00, RSPI_SPPCR);
tmp = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1;
spbr = clamp(tmp, 0, 255);
/* Sets transfer bit rate */
spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Sets number of frames to be used: 1 frame */
rspi_write8(rspi, 0x00, RSPI_SPDCR);
return spbr;
/* Sets RSPCK, SSL, next-access delay value */
rspi_write8(rspi, 0x00, RSPI_SPCKD);
rspi_write8(rspi, 0x00, RSPI_SSLND);
rspi_write8(rspi, 0x00, RSPI_SPND);
/* Sets parity, interrupt mask */
rspi_write8(rspi, 0x00, RSPI_SPCR2);
/* Sets SPCMD */
rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP,
RSPI_SPCMD0);
/* Sets RSPI mode */
rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
return 0;
}
/*
* functions for QSPI
*/
static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
{
u16 spcmd;
int spbr;
/* Sets output mode(CMOS) and MOSI signal(from previous transfer) */
rspi_write8(rspi, 0x00, RSPI_SPPCR);
/* Sets transfer bit rate */
spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz);
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Sets number of frames to be used: 1 frame */
rspi_write8(rspi, 0x00, RSPI_SPDCR);
/* Sets RSPCK, SSL, next-access delay value */
rspi_write8(rspi, 0x00, RSPI_SPCKD);
rspi_write8(rspi, 0x00, RSPI_SSLND);
rspi_write8(rspi, 0x00, RSPI_SPND);
/* Data Length Setting */
if (access_size == 8)
spcmd = SPCMD_SPB_8BIT;
else if (access_size == 16)
spcmd = SPCMD_SPB_16BIT;
else if (access_size == 32)
spcmd = SPCMD_SPB_32BIT;
spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SSLKP | SPCMD_SPNDEN;
/* Resets transfer data length */
rspi_write32(rspi, 0, QSPI_SPBMUL0);
/* Resets transmit and receive buffer */
rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
/* Sets buffer to allow normal operation */
rspi_write8(rspi, 0x00, QSPI_SPBFCR);
/* Sets SPCMD */
rspi_write16(rspi, spcmd, RSPI_SPCMD0);
/* Enables SPI function in a master mode */
rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR);
return 0;
}
#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
static void rspi_enable_irq(struct rspi_data *rspi, u8 enable)
{
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
......@@ -220,35 +321,6 @@ static void rspi_negate_ssl(struct rspi_data *rspi)
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
}
static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
{
/* Sets output mode(CMOS) and MOSI signal(from previous transfer) */
rspi_write8(rspi, 0x00, RSPI_SPPCR);
/* Sets transfer bit rate */
rspi_write8(rspi, rspi_calc_spbr(rspi), RSPI_SPBR);
/* Sets number of frames to be used: 1 frame */
rspi_write8(rspi, 0x00, RSPI_SPDCR);
/* Sets RSPCK, SSL, next-access delay value */
rspi_write8(rspi, 0x00, RSPI_SPCKD);
rspi_write8(rspi, 0x00, RSPI_SSLND);
rspi_write8(rspi, 0x00, RSPI_SPND);
/* Sets parity, interrupt mask */
rspi_write8(rspi, 0x00, RSPI_SPCR2);
/* Sets SPCMD */
rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP,
RSPI_SPCMD0);
/* Sets RSPI mode */
rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
return 0;
}
static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg,
struct spi_transfer *t)
{
......@@ -616,7 +688,7 @@ static int rspi_setup(struct spi_device *spi)
spi->bits_per_word = 8;
rspi->max_speed_hz = spi->max_speed_hz;
rspi_set_config_register(rspi, 8);
set_config_register(rspi, 8);
return 0;
}
......@@ -745,7 +817,16 @@ static int rspi_probe(struct platform_device *pdev)
struct rspi_data *rspi;
int ret, irq;
char clk_name[16];
struct rspi_plat_data *rspi_pd = pdev->dev.platform_data;
const struct spi_ops *ops;
const struct platform_device_id *id_entry = pdev->id_entry;
ops = (struct spi_ops *)id_entry->driver_data;
/* ops parameter check */
if (!ops->set_config_register) {
dev_err(&pdev->dev, "there is no set_config_register\n");
return -ENODEV;
}
/* get base addr */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(res == NULL)) {
......@@ -767,7 +848,7 @@ static int rspi_probe(struct platform_device *pdev)
rspi = spi_master_get_devdata(master);
platform_set_drvdata(pdev, rspi);
rspi->ops = ops;
rspi->master = master;
rspi->addr = ioremap(res->start, resource_size(res));
if (rspi->addr == NULL) {
......@@ -776,7 +857,7 @@ static int rspi_probe(struct platform_device *pdev)
goto error1;
}
snprintf(clk_name, sizeof(clk_name), "rspi%d", pdev->id);
snprintf(clk_name, sizeof(clk_name), "%s%d", id_entry->name, pdev->id);
rspi->clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(rspi->clk)) {
dev_err(&pdev->dev, "cannot get clock\n");
......@@ -790,7 +871,10 @@ static int rspi_probe(struct platform_device *pdev)
INIT_WORK(&rspi->ws, rspi_work);
init_waitqueue_head(&rspi->wait);
master->num_chipselect = 2;
master->num_chipselect = rspi_pd->num_chipselect;
if (!master->num_chipselect)
master->num_chipselect = 2; /* default */
master->bus_num = pdev->id;
master->setup = rspi_setup;
master->transfer = rspi_transfer;
......@@ -832,11 +916,28 @@ static int rspi_probe(struct platform_device *pdev)
return ret;
}
static struct spi_ops rspi_ops = {
.set_config_register = rspi_set_config_register,
};
static struct spi_ops qspi_ops = {
.set_config_register = qspi_set_config_register,
};
static struct platform_device_id spi_driver_ids[] = {
{ "rspi", (kernel_ulong_t)&rspi_ops },
{ "qspi", (kernel_ulong_t)&qspi_ops },
{},
};
MODULE_DEVICE_TABLE(platform, spi_driver_ids);
static struct platform_driver rspi_driver = {
.probe = rspi_probe,
.remove = rspi_remove,
.id_table = spi_driver_ids,
.driver = {
.name = "rspi",
.name = "renesas_spi",
.owner = THIS_MODULE,
},
};
......
include/linux/spi/rspi.h
View file @ 5ce0ba88
......@@ -26,6 +26,8 @@ struct rspi_plat_data {
unsigned int dma_rx_id;
unsigned dma_width_16bit:1; /* DMAC read/write width = 16-bit */
u16 num_chipselect;
};
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7