usb: dwc2: Add exit clock gating from wakeup interrupt

Added exit from clock gating mode when wakeup interrupt
is detected. To exit from the clock gating
in device mode "dwc2_gadget_exit_clock_gating()"
function is used with rem_wakeup parameter 0. To exit
clock gating in host mode "dwc2_host_exit_clock_gating()"
with rem_wakeup parameter 1.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210413073630.EF2CEA0094@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc2/core_intr.c

@@ -415,7 +415,8 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 	if (dwc2_is_device_mode(hsotg)) {
 		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
 			dwc2_readl(hsotg, DSTS));
-		if (hsotg->lx_state == DWC2_L2 && hsotg->in_ppd) {
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
 				u32 dctl = dwc2_readl(hsotg, DCTL);
 				/* Clear Remote Wakeup Signaling */
 				dctl &= ~DCTL_RMTWKUPSIG;
@@ -426,6 +427,12 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 					dev_err(hsotg->dev,
 						"exit partial_power_down failed\n");
 				call_gadget(hsotg, resume);
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
 		} else {
 			/* Change to L0 state */
 			hsotg->lx_state = DWC2_L0;
@@ -440,6 +447,10 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 						"exit partial_power_down failed\n");
 			}
 
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_host_exit_clock_gating(hsotg, 1);
+
 			/*
 			 * If we've got this quirk then the PHY is stuck upon
 			 * wakeup.  Assert reset.  This will propagate out and