ARM: OMAP2+: SmartReflex: Use per-OPP data structure

The SmartReflex driver incorrectly treats some per-OPP data as data
common to all OPPs (e.g., ERRMINLIMIT).  Move this data into a per-OPP
data structure.

Furthermore, in order to make the SmartReflex implementation ready for
the move to drivers/, remove the dependency from the SR driver code
to the voltage layer by querying the data tables only from the SR device
init code.

Based on Paul's original code for the SmartReflex driver conversion.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/smartreflex.c

@@ -347,22 +347,23 @@ static void sr_v2_disable(struct omap_sr *sr)
 	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
 }
 
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+				struct omap_sr *sr, u32 efuse_offs)
 {
 	int i;
 
 	if (!sr->nvalue_table) {
 		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
 			__func__);
-		return 0;
+		return NULL;
 	}
 
 	for (i = 0; i < sr->nvalue_count; i++) {
 		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
-			return sr->nvalue_table[i].nvalue;
+			return &sr->nvalue_table[i];
 	}
 
-	return 0;
+	return NULL;
 }
 
 /* Public Functions */
@@ -586,7 +587,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 {
 	struct omap_volt_data *volt_data;
 	struct omap_sr *sr = _sr_lookup(voltdm);
-	u32 nvalue_reciprocal;
+	struct omap_sr_nvalue_table *nvalue_row;
 	int ret;
 
 	if (IS_ERR(sr)) {
@@ -602,16 +603,16 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 		return PTR_ERR(volt_data);
 	}
 
-	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
+	nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs);
 
-	if (!nvalue_reciprocal) {
-		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
+	if (!nvalue_row) {
+		dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
 			 __func__, volt);
 		return -ENODATA;
 	}
 
 	/* errminlimit is opp dependent and hence linked to voltage */
-	sr->err_minlimit = volt_data->sr_errminlimit;
+	sr->err_minlimit = nvalue_row->errminlimit;
 
 	pm_runtime_get_sync(&sr->pdev->dev);
 
@@ -624,7 +625,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 	if (ret)
 		return ret;
 
-	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
 
 	/* SRCONFIG - enable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
@@ -872,7 +873,6 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
 	struct resource *mem, *irq;
 	struct dentry *nvalue_dir;
-	struct omap_volt_data *volt_data;
 	int i, ret = 0;
 
 	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
@@ -990,12 +990,10 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 		goto err_debugfs;
 	}
 
-	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
-	if (!volt_data) {
-		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the"
-			" corresponding vdd. Cannot create debugfs"
-			"entries for n-values\n",
+	if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
 			 __func__, sr_info->name);
+
 		ret = -ENODATA;
 		goto err_debugfs;
 	}
@@ -1003,8 +1001,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	for (i = 0; i < sr_info->nvalue_count; i++) {
 		char name[NVALUE_NAME_LEN + 1];
 
-		snprintf(name, sizeof(name), "volt_%d",
-			 volt_data[i].volt_nominal);
+		snprintf(name, sizeof(name), "volt_%lu",
+				sr_info->nvalue_table[i].volt_nominal);
 		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
 				&(sr_info->nvalue_table[i].nvalue));
 	}

arch/arm/mach-omap2/sr_device.c

@@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
 {
 	struct omap_sr_nvalue_table *nvalue_table;
-	int i, count = 0;
+	int i, j, count = 0;
+
+	sr_data->nvalue_count = 0;
+	sr_data->nvalue_table = NULL;
 
 	while (volt_data[count].volt_nominal)
 		count++;
@@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
 			GFP_KERNEL);
 
-	for (i = 0; i < count; i++) {
+	if (!nvalue_table) {
+		pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+		return;
+	}
+
+	for (i = 0, j = 0; i < count; i++) {
 		u32 v;
+
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
 		 * A __raw_readl will fail for non-32 bit aligned address
@@ -61,12 +70,27 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 			v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
 		}
 
-		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
-		nvalue_table[i].nvalue = v;
+		/*
+		 * Many OMAP SoCs don't have the eFuse values set.
+		 * For example, pretty much all OMAP3xxx before
+		 * ES3.something.
+		 *
+		 * XXX There needs to be some way for board files or
+		 * userspace to add these in.
+		 */
+		if (v == 0)
+			continue;
+
+		nvalue_table[j].nvalue = v;
+		nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
+		nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+		nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+		j++;
 	}
 
 	sr_data->nvalue_table = nvalue_table;
-	sr_data->nvalue_count = count;
+	sr_data->nvalue_count = j;
 }
 
 static int __init sr_dev_init(struct omap_hwmod *oh, void *user)

include/linux/power/smartreflex.h

@@ -245,10 +245,14 @@ struct omap_sr_class_data {
  *
  * @efuse_offs:	  The offset of the efuse where n-target values are stored.
  * @nvalue:	  The n-target value.
+ * @errminlimit:  The value of the ERRMINLIMIT bitfield for this n-target
+ * @volt_nominal: microvolts DC that the VDD is initially programmed to
  */
 struct omap_sr_nvalue_table {
 	u32 efuse_offs;
 	u32 nvalue;
+	u32 errminlimit;
+	unsigned long volt_nominal;
 };
 
 /**