Commit 5effabbe authored by Yoshihiro Shimoda's avatar Yoshihiro Shimoda Committed by Greg Kroah-Hartman

USB: r8a66597-hcd: use platform_data instead of module_param

CPU/board specific parameters (PLL clock, vif etc...) can be set
by platform_data instead of module_param.

v2: remove irq_sense member in platform_data because it can OR in
    IRQF_TRIGGER_LOW or IRQF_TRIGGER_FALLING against IORESOURCE_IRQ in
    the struct resource.
Signed-off-by: default avatarYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Reviewed-by: default avatarPaul Mundt <lethal@linux-sh.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 32ebbe7b
......@@ -46,31 +46,10 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
MODULE_ALIAS("platform:r8a66597_hcd");
#define DRIVER_VERSION "10 Apr 2008"
#define DRIVER_VERSION "2009-05-26"
static const char hcd_name[] = "r8a66597_hcd";
/* module parameters */
#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
static unsigned short clock = XTAL12;
module_param(clock, ushort, 0644);
MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
"(default=0)");
#endif
static unsigned short vif = LDRV;
module_param(vif, ushort, 0644);
MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
static unsigned short endian;
module_param(endian, ushort, 0644);
MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
static unsigned short irq_sense = 0xff;
module_param(irq_sense, ushort, 0644);
MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
"(default=32)");
static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
static int r8a66597_get_frame(struct usb_hcd *hcd);
......@@ -136,7 +115,8 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
}
} while ((tmp & USBE) != USBE);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
SYSCFG0);
i = 0;
r8a66597_bset(r8a66597, XCKE, SYSCFG0);
......@@ -203,6 +183,9 @@ static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
static int enable_controller(struct r8a66597 *r8a66597)
{
int ret, port;
u16 vif = r8a66597->pdata->vif ? LDRV : 0;
u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
ret = r8a66597_clock_enable(r8a66597);
if (ret < 0)
......@@ -2418,6 +2401,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
goto clean_up;
}
if (pdev->dev.platform_data == NULL) {
dev_err(&pdev->dev, "no platform data\n");
ret = -ENODEV;
goto clean_up;
}
/* initialize hcd */
hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
if (!hcd) {
......@@ -2428,6 +2417,8 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
r8a66597 = hcd_to_r8a66597(hcd);
memset(r8a66597, 0, sizeof(struct r8a66597));
dev_set_drvdata(&pdev->dev, r8a66597);
r8a66597->pdata = pdev->dev.platform_data;
r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
......@@ -2458,29 +2449,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
hcd->rsrc_start = res->start;
/* irq_sense setting on cmdline takes precedence over resource
* settings, so the introduction of irqflags in IRQ resourse
* won't disturb existing setups */
switch (irq_sense) {
case INTL:
irq_trigger = IRQF_TRIGGER_LOW;
break;
case 0:
irq_trigger = IRQF_TRIGGER_FALLING;
break;
case 0xff:
if (irq_trigger)
irq_sense = (irq_trigger & IRQF_TRIGGER_LOW) ?
INTL : 0;
else {
irq_sense = INTL;
irq_trigger = IRQF_TRIGGER_LOW;
}
break;
default:
dev_err(&pdev->dev, "Unknown irq_sense value.\n");
}
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to add hcd\n");
......
......@@ -30,6 +30,8 @@
#include <linux/clk.h>
#endif
#include <linux/usb/r8a66597.h>
#define SYSCFG0 0x00
#define SYSCFG1 0x02
#define SYSSTS0 0x04
......@@ -488,6 +490,7 @@ struct r8a66597 {
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
struct clk *clk;
#endif
struct r8a66597_platdata *pdata;
struct r8a66597_device device0;
struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB];
struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE];
......@@ -506,6 +509,7 @@ struct r8a66597 {
unsigned long child_connect_map[4];
unsigned bus_suspended:1;
unsigned irq_sense_low:1;
};
static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
......@@ -660,10 +664,36 @@ static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
{
unsigned long dvstctr_reg = get_dvstctr_reg(port);
if (r8a66597->pdata->port_power) {
r8a66597->pdata->port_power(port, power);
} else {
if (power)
r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
else
r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
}
}
static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
{
u16 clock = 0;
switch (pdata->xtal) {
case R8A66597_PLATDATA_XTAL_12MHZ:
clock = XTAL12;
break;
case R8A66597_PLATDATA_XTAL_24MHZ:
clock = XTAL24;
break;
case R8A66597_PLATDATA_XTAL_48MHZ:
clock = XTAL48;
break;
default:
printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
break;
}
return clock;
}
#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)
......
/*
* R8A66597 driver platform data
*
* Copyright (C) 2009 Renesas Solutions Corp.
*
* Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef __LINUX_USB_R8A66597_H
#define __LINUX_USB_R8A66597_H
#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
struct r8a66597_platdata {
/* This ops can controll port power instead of DVSTCTR register. */
void (*port_power)(int port, int power);
/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
unsigned xtal:2;
/* set one = 3.3V, set zero = 1.5V */
unsigned vif:1;
/* set one = big endian, set zero = little endian */
unsigned endian:1;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment