usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value

[ Upstream commit ca02954a ]

USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide
interface or 0x9 when it has a 8-bit wide interface.
GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5.
In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim
results in 0xD (0x5 | 0x9).
That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim
value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc2/gadget.c

@@ -2532,7 +2532,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 	/* keep other bits untouched (so e.g. forced modes are not lost) */
 	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
-		GUSBCFG_HNPCAP);
+		GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
 	val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
@@ -3403,7 +3403,7 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
 	/* keep other bits untouched (so e.g. forced modes are not lost) */
 	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
-		GUSBCFG_HNPCAP);
+		GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
 	trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;