Commit 5fe42d5b authored by Rafał Miłecki's avatar Rafał Miłecki Committed by David Woodhouse

mtd: basic (read only) driver for BCMA serial flash

This registers MTD driver for serial flash platform device. Right now it
supports reading only, writing still has to be implemented.

Artem: minor amendments.
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 6997af7c
...@@ -120,6 +120,14 @@ config MTD_SST25L ...@@ -120,6 +120,14 @@ config MTD_SST25L
Set up your spi devices with the right board-specific platform data, Set up your spi devices with the right board-specific platform data,
if you want to specify device partitioning. if you want to specify device partitioning.
config MTD_BCM47XXSFLASH
tristate "R/O support for serial flash on BCMA bus"
depends on BCMA_SFLASH
help
BCMA bus can have various flash memories attached, they are
registered by bcma as platform devices. This enables driver for
serial flash memories (only read-only mode is implemented).
config MTD_SLRAM config MTD_SLRAM
tristate "Uncached system RAM" tristate "Uncached system RAM"
help help
......
...@@ -19,5 +19,6 @@ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o ...@@ -19,5 +19,6 @@ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_M25P80) += m25p80.o
obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o obj-$(CONFIG_MTD_SST25L) += sst25l.o
obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
CFLAGS_docg3.o += -I$(src) CFLAGS_docg3.o += -I$(src)
\ No newline at end of file
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
static const char *probes[] = { "bcm47xxpart", NULL };
static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct bcma_sflash *sflash = mtd->priv;
/* Check address range */
if ((from + len) > mtd->size)
return -EINVAL;
memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from),
len);
return len;
}
static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash,
struct mtd_info *mtd)
{
mtd->priv = sflash;
mtd->name = "bcm47xxsflash";
mtd->owner = THIS_MODULE;
mtd->type = MTD_ROM;
mtd->size = sflash->size;
mtd->_read = bcm47xxsflash_read;
/* TODO: implement writing support and verify/change following code */
mtd->flags = MTD_CAP_ROM;
mtd->writebufsize = mtd->writesize = 1;
}
static int bcm47xxsflash_probe(struct platform_device *pdev)
{
struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
int err;
sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
if (!sflash->mtd) {
err = -ENOMEM;
goto out;
}
bcm47xxsflash_fill_mtd(sflash, sflash->mtd);
err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0);
if (err) {
pr_err("Failed to register MTD device: %d\n", err);
goto err_dev_reg;
}
return 0;
err_dev_reg:
kfree(sflash->mtd);
out:
return err;
}
static int __devexit bcm47xxsflash_remove(struct platform_device *pdev)
{
struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
mtd_device_unregister(sflash->mtd);
kfree(sflash->mtd);
return 0;
}
static struct platform_driver bcma_sflash_driver = {
.remove = __devexit_p(bcm47xxsflash_remove),
.driver = {
.name = "bcma_sflash",
.owner = THIS_MODULE,
},
};
static int __init bcm47xxsflash_init(void)
{
int err;
err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe);
if (err)
pr_err("Failed to register BCMA serial flash driver: %d\n",
err);
return err;
}
static void __exit bcm47xxsflash_exit(void)
{
platform_driver_unregister(&bcma_sflash_driver);
}
module_init(bcm47xxsflash_init);
module_exit(bcm47xxsflash_exit);
...@@ -522,6 +522,8 @@ struct bcma_sflash { ...@@ -522,6 +522,8 @@ struct bcma_sflash {
u32 blocksize; u32 blocksize;
u16 numblocks; u16 numblocks;
u32 size; u32 size;
struct mtd_info *mtd;
}; };
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment