Commit 5ff49f70 authored by Martin Dalecki's avatar Martin Dalecki Committed by Linus Torvalds

[PATCH] 2.5.15 IDE 62a

- Streamline device detection reporting to always use ->slot_name.

- Apply 64 bit sector size fixes to the overall code.

- Push ->handler down to the struct ata_channel.

- Introduce channel group based locking instead of a single global lock for all
   operations. There are still some places where we have preserved the ide_lock.
   We can't lock for queues during device probe and we protect global data
   structures during device registration and unregistration in ide.c with it.

- Start replacement of serialized access to the registers of
   channels which share them with proper host chip driver specific locking.
   This affects the following host chip drivers:

   cmd640.c, rz1000, ... ?

   Seems some are setting the serialize flag just in case. So better let's do it
   gradually over time.

   Well, I still have to think whatever we really need to put channels sharing
   an IRQ line in the same locking group.

   From now on the sick concept of a hw group is gone now. We have full blown
   per channel request queues! Hopefully I will be able soon to get my hands on
   a dual Athlon machine to check how this all behaves on a multi SMP machine.

- Move the whole SUPPORT_VLB_SYNC stuff to the only place where it is used: the
   pdc4030 host chip driver.  Eliminate it from the global driver part.

- Eliminate pseudo portability macros from pdc4030. This is a host chip firmly
   based on VLB.
parent 938f5b72
......@@ -166,36 +166,42 @@ int cmd640_vlb = 0;
/*
* Registers and masks for easy access by drive index:
*/
static byte prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
static byte prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
static byte arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
static byte drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
/*
* Protects register file access from overlapping on primary and secondary
* channel, since those share hardware resources.
*/
static spinlock_t cmd640_lock __cacheline_aligned = SPIN_LOCK_UNLOCKED;
static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
/*
* Current cmd640 timing values for each drive.
* The defaults for each are the slowest possible timings.
*/
static byte setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
static byte active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
static byte recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
#endif
/*
* These are initialized to point at the devices we control
*/
static struct ata_channel *cmd_hwif0, *cmd_hwif1;
static ide_drive_t *cmd_drives[4];
static struct ata_device *cmd_drives[4];
/*
* Interface to access cmd640x registers
*/
static unsigned int cmd640_key;
static void (*put_cmd640_reg)(unsigned short reg, byte val);
static byte (*get_cmd640_reg)(unsigned short reg);
static u8 (*get_cmd640_reg)(unsigned short reg);
/*
* This is read from the CFR reg, and is used in several places.
......@@ -221,9 +227,9 @@ static void put_cmd640_reg_pci1 (unsigned short reg, byte val)
restore_flags(flags);
}
static byte get_cmd640_reg_pci1 (unsigned short reg)
static u8 get_cmd640_reg_pci1 (unsigned short reg)
{
byte b;
u8 b;
unsigned long flags;
save_flags(flags);
......@@ -236,7 +242,7 @@ static byte get_cmd640_reg_pci1 (unsigned short reg)
/* PCI method 2 access (from CMD datasheet) */
static void put_cmd640_reg_pci2 (unsigned short reg, byte val)
static void put_cmd640_reg_pci2 (unsigned short reg, u8 val)
{
unsigned long flags;
......@@ -248,9 +254,9 @@ static void put_cmd640_reg_pci2 (unsigned short reg, byte val)
restore_flags(flags);
}
static byte get_cmd640_reg_pci2 (unsigned short reg)
static u8 get_cmd640_reg_pci2 (unsigned short reg)
{
byte b;
u8 b;
unsigned long flags;
save_flags(flags);
......@@ -264,7 +270,7 @@ static byte get_cmd640_reg_pci2 (unsigned short reg)
/* VLB access */
static void put_cmd640_reg_vlb (unsigned short reg, byte val)
static void put_cmd640_reg_vlb (unsigned short reg, u8 val)
{
unsigned long flags;
......@@ -275,9 +281,9 @@ static void put_cmd640_reg_vlb (unsigned short reg, byte val)
restore_flags(flags);
}
static byte get_cmd640_reg_vlb (unsigned short reg)
static u8 get_cmd640_reg_vlb (unsigned short reg)
{
byte b;
u8 b;
unsigned long flags;
save_flags(flags);
......@@ -290,7 +296,7 @@ static byte get_cmd640_reg_vlb (unsigned short reg)
static int __init match_pci_cmd640_device (void)
{
const byte ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
unsigned int i;
for (i = 0; i < 4; i++) {
if (get_cmd640_reg(i) != ven_dev[i])
......@@ -338,7 +344,7 @@ static int __init probe_for_cmd640_pci2 (void)
*/
static int __init probe_for_cmd640_vlb (void)
{
byte b;
u8 b;
get_cmd640_reg = get_cmd640_reg_vlb;
put_cmd640_reg = put_cmd640_reg_vlb;
......@@ -404,7 +410,7 @@ void cmd640_dump_regs (void)
static void __init check_prefetch (unsigned int index)
{
struct ata_device *drive = cmd_drives[index];
byte b = get_cmd640_reg(prefetch_regs[index]);
u8 b = get_cmd640_reg(prefetch_regs[index]);
if (b & prefetch_masks[index]) { /* is prefetch off? */
drive->channel->no_unmask = 0;
......@@ -450,19 +456,19 @@ static void __init setup_device_ptrs (void)
*/
static void set_prefetch_mode (unsigned int index, int mode)
{
ide_drive_t *drive = cmd_drives[index];
struct ata_device *drive = cmd_drives[index];
int reg = prefetch_regs[index];
byte b;
u8 b;
unsigned long flags;
save_flags(flags);
cli();
b = get_cmd640_reg(reg);
if (mode) { /* want prefetch on? */
#if CMD640_PREFETCH_MASKS
# if CMD640_PREFETCH_MASKS
drive->channel->no_unmask = 1;
drive->channel->unmask = 0;
#endif
# endif
drive->channel->no_io_32bit = 0;
b &= ~prefetch_masks[index]; /* enable prefetch */
} else {
......@@ -480,7 +486,7 @@ static void set_prefetch_mode (unsigned int index, int mode)
*/
static void display_clocks (unsigned int index)
{
byte active_count, recovery_count;
u8 active_count, recovery_count;
active_count = active_counts[index];
if (active_count == 1)
......@@ -497,7 +503,7 @@ static void display_clocks (unsigned int index)
* Pack active and recovery counts into single byte representation
* used by controller
*/
inline static byte pack_nibbles (byte upper, byte lower)
static inline u8 pack_nibbles (u8 upper, u8 lower)
{
return ((upper & 0x0f) << 4) | (lower & 0x0f);
}
......@@ -507,7 +513,7 @@ inline static byte pack_nibbles (byte upper, byte lower)
*/
static void __init retrieve_drive_counts (unsigned int index)
{
byte b;
u8 b;
/*
* Get the internal setup timing, and convert to clock count
......@@ -537,9 +543,9 @@ static void __init retrieve_drive_counts (unsigned int index)
static void program_drive_counts (unsigned int index)
{
unsigned long flags;
byte setup_count = setup_counts[index];
byte active_count = active_counts[index];
byte recovery_count = recovery_counts[index];
u8 setup_count = setup_counts[index];
u8 active_count = active_counts[index];
u8 recovery_count = recovery_counts[index];
/*
* Set up address setup count and drive read/write timing registers.
......@@ -589,10 +595,12 @@ static void program_drive_counts (unsigned int index)
/*
* Set a specific pio_mode for a drive
*/
static void cmd640_set_mode (unsigned int index, byte pio_mode, unsigned int cycle_time, unsigned int active_time, unsigned int setup_time)
static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time, unsigned int active_time, unsigned int setup_time)
{
int recovery_time, clock_time;
byte setup_count, active_count, recovery_count, recovery_count2, cycle_count;
u8 setup_count, active_count;
u8 recovery_count, recovery_count2;
u8 cycle_count;
recovery_time = cycle_time - (setup_time + active_time);
clock_time = 1000 / system_bus_speed;
......@@ -639,16 +647,19 @@ static void cmd640_set_mode (unsigned int index, byte pio_mode, unsigned int cyc
/*
* Drive PIO mode selection:
*/
static void cmd640_tune_drive (ide_drive_t *drive, byte mode_wanted)
static void cmd640_tune_drive(struct ata_device *drive, byte mode_wanted)
{
byte b;
u8 b;
struct ata_timing *t;
unsigned int index = 0;
unsigned long flags;
spin_lock_irqsave(&cmd640_lock, flags);
while (drive != cmd_drives[index]) {
if (++index > 3) {
printk("%s: bad news in cmd640_tune_drive\n", drive->name);
return;
printk(KERN_ERR "%s: bad news in cmd640_tune_drive\n", drive->name);
goto out_lock;
}
}
switch (mode_wanted) {
......@@ -659,21 +670,21 @@ static void cmd640_tune_drive (ide_drive_t *drive, byte mode_wanted)
if (mode_wanted)
b |= 0x27;
put_cmd640_reg(CNTRL, b);
printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
return;
printk(KERN_INFO "%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
goto out_lock;
case 8: /* set prefetch off */
case 9: /* set prefetch on */
mode_wanted &= 1;
set_prefetch_mode(index, mode_wanted);
printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
return;
goto out_lock;
}
if (mode_wanted == 255)
t = ata_timing_data(ata_timing_mode(drive, XFER_PIO | XFER_EPIO));
else
t = ata_timing_data(XFER_PIO_0 + min_t(byte, mode_wanted, 4));
t = ata_timing_data(XFER_PIO_0 + min_t(u8, mode_wanted, 4));
cmd640_set_mode(index, t->mode - XFER_PIO_0, t->cycle, t->active, t->setup);
......@@ -681,10 +692,14 @@ static void cmd640_tune_drive (ide_drive_t *drive, byte mode_wanted)
drive->name, t->mode, t->cycle);
display_clocks(index);
out_lock:
spin_unlock_irqrestore(&cmd640_lock, flags);
return;
}
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
#endif
/*
* Probe for a cmd640 chipset, and initialize it if found. Called from ide.c
......@@ -697,7 +712,7 @@ int __init ide_probe_for_cmd640x(void)
int second_port_cmd640 = 0;
const char *bus_type, *port2;
unsigned int index;
byte b, cfr;
u8 b, cfr;
if (cmd640_vlb && probe_for_cmd640_vlb()) {
bus_type = "VLB";
......@@ -743,7 +758,7 @@ int __init ide_probe_for_cmd640x(void)
cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif0->tuneproc = &cmd640_tune_drive;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
#endif
/*
* Ensure compatibility by always using the slowest timings
......@@ -777,7 +792,7 @@ int __init ide_probe_for_cmd640x(void)
second_port_cmd640 = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
second_port_toggled = 1;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
#endif
port2 = "enabled";
} else {
put_cmd640_reg(CNTRL, b); /* restore original setting */
......@@ -796,7 +811,7 @@ int __init ide_probe_for_cmd640x(void)
cmd_hwif1->unit = ATA_SECONDARY;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif1->tuneproc = &cmd640_tune_drive;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
#endif
}
printk("%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
cmd_hwif0->serialized ? "" : "not ", port2);
......@@ -806,7 +821,7 @@ int __init ide_probe_for_cmd640x(void)
* Do not unnecessarily disturb any prior BIOS setup of these.
*/
for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
ide_drive_t *drive = cmd_drives[index];
struct ata_device *drive = cmd_drives[index];
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
if (drive->autotune || ((index > 1) && second_port_toggled)) {
/*
......@@ -837,7 +852,7 @@ int __init ide_probe_for_cmd640x(void)
check_prefetch (index);
printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
index, drive->channel->no_io_32bit ? "off" : "on");
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
#endif
}
#ifdef CMD640_DUMP_REGS
......
......@@ -316,7 +316,7 @@ static ide_startstop_t idedisk_do_request(struct ata_device *drive, struct reque
unsigned long flags;
int ret;
spin_lock_irqsave(&ide_lock, flags);
spin_lock_irqsave(drive->channel->lock, flags);
ret = blk_queue_start_tag(&drive->queue, rq);
......@@ -325,7 +325,7 @@ static ide_startstop_t idedisk_do_request(struct ata_device *drive, struct reque
if (ata_pending_commands(drive) > drive->max_last_depth)
drive->max_last_depth = ata_pending_commands(drive);
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(drive->channel->lock, flags);
if (ret) {
BUG_ON(!ata_pending_commands(drive));
......@@ -438,13 +438,6 @@ static int set_multcount(struct ata_device *drive, int arg)
if (!drive->id)
return -EIO;
/* FIXME: Hmm... just bailing out my be problematic, since there *is*
* activity during boot. For now the same problem persists in
* set_pio_mode() we will have to do something about it soon.
*/
if (HWGROUP(drive)->handler)
return -EBUSY;
if (arg > drive->id->max_multsect)
arg = drive->id->max_multsect;
......@@ -466,9 +459,6 @@ static int set_multcount(struct ata_device *drive, int arg)
static int set_nowerr(struct ata_device *drive, int arg)
{
if (HWGROUP(drive)->handler)
return -EBUSY;
drive->nowerr = arg;
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
......@@ -576,8 +566,8 @@ static int idedisk_suspend(struct device *dev, u32 state, u32 level)
return 0;
/* wait until all commands are finished */
printk("ide_disk_suspend()\n");
while (HWGROUP(drive)->handler)
/* FIXME: waiting for spinlocks should be done instead. */
while (drive->channel->handler)
yield();
/* set the drive to standby */
......@@ -1022,7 +1012,7 @@ static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct f
return -EBUSY;
val = set_lba_addressing(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -1048,7 +1038,7 @@ static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct f
return -EBUSY;
val = set_multcount(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -1072,7 +1062,7 @@ static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct f
return -EBUSY;
val = set_nowerr(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -1096,7 +1086,7 @@ static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct f
return -EBUSY;
val = write_cache(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -1119,7 +1109,7 @@ static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct f
return -EBUSY;
val = set_acoustic(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -1144,7 +1134,7 @@ static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct f
return -EBUSY;
val = set_using_tcq(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......
......@@ -553,15 +553,14 @@ static void __init pdc20270_device_order_fixup (struct pci_dev *dev, struct ata_
}
}
}
printk("ATA: %s: controller on PCI bus %02x dev %02x\n",
dev->name, dev->bus->number, dev->devfn);
printk(KERN_INFO "ATA: %s: controller on PCI slot %s dev %02x\n",
dev->name, dev->slot_name, dev->devfn);
setup_pci_device(dev, d);
if (!dev2)
return;
d2 = d;
printk("ATA: %s: controller on PCI bus %02x dev %02x\n",
dev2->name, dev2->bus->number, dev2->devfn);
printk(KERN_INFO "ATA: %s: controller on PCI slot %s dev %02x\n",
dev2->name, dev2->slot_name, dev2->devfn);
setup_pci_device(dev2, d2);
}
......@@ -584,8 +583,8 @@ static void __init hpt374_device_order_fixup (struct pci_dev *dev, struct ata_pc
}
}
printk("%s: IDE controller on PCI bus %02x dev %02x\n",
dev->name, dev->bus->number, dev->devfn);
printk(KERN_INFO "ATA: %s: controller on PCI slot %s dev %02x\n",
dev->name, dev->slot_name, dev->devfn);
setup_pci_device(dev, d);
if (!dev2) {
return;
......@@ -601,8 +600,8 @@ static void __init hpt374_device_order_fixup (struct pci_dev *dev, struct ata_pc
}
}
d2 = d;
printk("%s: IDE controller on PCI bus %02x dev %02x\n",
dev2->name, dev2->bus->number, dev2->devfn);
printk(KERN_INFO "ATA: %s: controller on PCI slot %s dev %02x\n",
dev2->name, dev2->slot_name, dev2->devfn);
setup_pci_device(dev2, d2);
}
......@@ -623,7 +622,7 @@ static void __init hpt366_device_order_fixup (struct pci_dev *dev, struct ata_pc
switch(class_rev) {
case 5:
case 4:
case 3: printk("%s: IDE controller on PCI slot %s\n", dev->name, dev->slot_name);
case 3: printk(KERN_INFO "ATA: %s: controller on PCI slot %s\n", dev->name, dev->slot_name);
setup_pci_device(dev, d);
return;
default: break;
......@@ -639,17 +638,17 @@ static void __init hpt366_device_order_fixup (struct pci_dev *dev, struct ata_pc
pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
if ((pin1 != pin2) && (dev->irq == dev2->irq)) {
d->bootable = ON_BOARD;
printk("%s: onboard version of chipset, pin1=%d pin2=%d\n", dev->name, pin1, pin2);
printk(KERN_INFO "ATAL: %s: onboard version of chipset, pin1=%d pin2=%d\n", dev->name, pin1, pin2);
}
break;
}
}
printk("%s: IDE controller on PCI slot %s\n", dev->name, dev->slot_name);
printk(KERN_INFO "ATA: %s: controller on PCI slot %s\n", dev->name, dev->slot_name);
setup_pci_device(dev, d);
if (!dev2)
return;
d2 = d;
printk("%s: IDE controller on PCI slot %s\n", dev2->name, dev2->slot_name);
printk(KERN_INFO "ATA: %s: controller on PCI slot %s\n", dev2->name, dev2->slot_name);
setup_pci_device(dev2, d2);
}
......@@ -679,6 +678,10 @@ static void __init scan_pcidev(struct pci_dev *dev)
}
if (!d) {
/* Only check the device calls, if it wasn't listed, since
* there are in esp. some pdc202xx chips which "work around"
* beeing grabbed by generic drivers.
*/
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
printk(KERN_INFO "ATA: unknown interface: %s, on PCI slot %s\n",
dev->name, dev->slot_name);
......
......@@ -20,7 +20,9 @@
*
* - Find a way to duplicate less code with ide-dma and use the
* dma fileds in the hwif structure instead of our own
*
* - Fix check_disk_change() call
*
* - Make module-able (includes setting ppc_md. hooks from within
* this file and not from arch code, and handling module deps with
* mediabay (by having both modules do dynamic lookup of each other
......@@ -280,7 +282,7 @@ struct pmu_sleep_notifier idepmac_sleep_notifier = {
#endif /* CONFIG_PMAC_PBOOK */
static int __pmac
pmac_ide_find(ide_drive_t *drive)
pmac_ide_find(struct ata_device *drive)
{
struct ata_channel *hwif = drive->channel;
ide_ioreg_t base;
......@@ -352,7 +354,7 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw,
* device for yaboot configuration
*/
struct device_node*
pmac_ide_get_devnode(ide_drive_t *drive)
pmac_ide_get_devnode(struct ata_device *drive)
{
int i = pmac_ide_find(drive);
if (i < 0)
......@@ -365,7 +367,7 @@ pmac_ide_get_devnode(ide_drive_t *drive)
* is enough, I beleive selectproc will be called whenever an IDE command is started,
* but... */
static void __pmac
pmac_ide_selectproc(ide_drive_t *drive)
pmac_ide_selectproc(struct ata_device *drive)
{
int i = pmac_ide_find(drive);
if (i < 0)
......@@ -391,7 +393,7 @@ pmac_ide_selectproc(ide_drive_t *drive)
* --BenH
*/
static int __pmac
wait_for_ready(ide_drive_t *drive)
wait_for_ready(struct ata_device *drive)
{
/* Timeout bumped for some powerbooks */
int timeout = 2000;
......@@ -417,7 +419,7 @@ wait_for_ready(ide_drive_t *drive)
}
static int __pmac
pmac_ide_do_setfeature(ide_drive_t *drive, byte command)
pmac_ide_do_setfeature(struct ata_device *drive, byte command)
{
int result = 1;
unsigned long flags;
......@@ -477,7 +479,7 @@ pmac_ide_do_setfeature(ide_drive_t *drive, byte command)
/* Calculate PIO timings */
static void __pmac
pmac_ide_tuneproc(ide_drive_t *drive, byte pio)
pmac_ide_tuneproc(struct ata_device *drive, byte pio)
{
struct ata_timing *t;
int i;
......@@ -667,19 +669,19 @@ set_timings_mdma(int intf_type, u32 *timings, byte speed, int drive_cycle_time)
if (halfTick)
*timings |= TR_33_MDMA_HALFTICK;
}
#ifdef IDE_PMAC_DEBUG
# ifdef IDE_PMAC_DEBUG
printk(KERN_ERR "ide_pmac: Set MDMA timing for mode %d, reg: 0x%08x\n",
speed & 0xf, *timings);
#endif
# endif
return 0;
}
#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
#endif
/* You may notice we don't use this function on normal operation,
* our, normal mdma function is supposed to be more precise
*/
static int __pmac
pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
pmac_ide_tune_chipset (struct ata_device *drive, byte speed)
{
int intf = pmac_ide_find(drive);
int unit = (drive->select.b.unit & 0x01);
......@@ -714,7 +716,7 @@ pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
return 1;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
#endif
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
......@@ -950,7 +952,7 @@ pmac_ide_probe(void)
&& strcasecmp(np->parent->name, "media-bay") == 0) {
#ifdef CONFIG_PMAC_PBOOK
media_bay_set_ide_infos(np->parent,base,irq,i);
#endif /* CONFIG_PMAC_PBOOK */
#endif
in_bay = 1;
if (!bidp)
pmif->aapl_bus_id = 1;
......@@ -981,14 +983,14 @@ pmac_ide_probe(void)
#ifdef CONFIG_PMAC_PBOOK
if (in_bay && check_media_bay_by_base(base, MB_CD) == 0)
hwif->noprobe = 0;
#endif /* CONFIG_PMAC_PBOOK */
#endif
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (pdev && np->n_addrs >= 2) {
/* has a DBDMA controller channel */
pmac_ide_setup_dma(np, i);
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
#endif
++i;
}
......@@ -998,7 +1000,7 @@ pmac_ide_probe(void)
#ifdef CONFIG_PMAC_PBOOK
pmu_register_sleep_notifier(&idepmac_sleep_notifier);
#endif /* CONFIG_PMAC_PBOOK */
#endif
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
......@@ -1230,7 +1232,7 @@ udma_bits_to_command(unsigned char bits, int high_speed)
/* Calculate MultiWord DMA timings */
static int __pmac
pmac_ide_mdma_enable(ide_drive_t *drive, int idx)
pmac_ide_mdma_enable(struct ata_device *drive, int idx)
{
byte bits = drive->id->dma_mword & 0x07;
byte feature = dma_bits_to_command(bits);
......@@ -1271,7 +1273,7 @@ pmac_ide_mdma_enable(ide_drive_t *drive, int idx)
/* Calculate Ultra DMA timings */
static int __pmac
pmac_ide_udma_enable(ide_drive_t *drive, int idx, int high_speed)
pmac_ide_udma_enable(struct ata_device *drive, int idx, int high_speed)
{
byte bits = drive->id->dma_ultra & 0x1f;
byte feature = udma_bits_to_command(bits, high_speed);
......@@ -1302,7 +1304,7 @@ pmac_ide_udma_enable(ide_drive_t *drive, int idx, int high_speed)
}
static int __pmac
pmac_ide_check_dma(ide_drive_t *drive)
pmac_ide_check_dma(struct ata_device *drive)
{
int ata4, udma, idx;
struct hd_driveid *id = drive->id;
......@@ -1343,7 +1345,7 @@ pmac_ide_check_dma(ide_drive_t *drive)
return 0;
}
static void ide_toggle_bounce(ide_drive_t *drive, int on)
static void ide_toggle_bounce(struct ata_device *drive, int on)
{
dma64_addr_t addr = BLK_BOUNCE_HIGH;
......@@ -1530,7 +1532,7 @@ static int pmac_ide_dmaproc(struct ata_device *drive)
}
#endif
static void idepmac_sleep_device(ide_drive_t *drive, int i, unsigned base)
static void idepmac_sleep_device(struct ata_device *drive, int i, unsigned base)
{
int j;
......@@ -1568,7 +1570,7 @@ static void idepmac_sleep_device(ide_drive_t *drive, int i, unsigned base)
#ifdef CONFIG_PMAC_PBOOK
static void __pmac
idepmac_wake_device(ide_drive_t *drive, int used_dma)
idepmac_wake_device(struct ata_device *drive, int used_dma)
{
/* We force the IDE subdriver to check for a media change
* This must be done first or we may lost the condition
......@@ -1590,12 +1592,12 @@ idepmac_wake_device(ide_drive_t *drive, int used_dma)
*/
if (used_dma && !ide_spin_wait_hwgroup(drive)) {
/* Lock HW group */
set_bit(IDE_BUSY, &HWGROUP(drive)->flags);
set_bit(IDE_BUSY, &drive->channel->active);
pmac_ide_check_dma(drive);
clear_bit(IDE_BUSY, &HWGROUP(drive)->flags);
spin_unlock_irq(&ide_lock);
clear_bit(IDE_BUSY, &drive->channel->active);
spin_unlock_irq(drive->channel->lock);
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
#endif
}
static void __pmac
......@@ -1630,7 +1632,7 @@ idepmac_wake_interface(int i, unsigned long base, int mediabay)
}
static void
idepmac_sleep_drive(ide_drive_t *drive, int idx, unsigned long base)
idepmac_sleep_drive(struct ata_device *drive, int idx, unsigned long base)
{
/* Wait for HW group to complete operations */
if (ide_spin_wait_hwgroup(drive))
......@@ -1639,15 +1641,15 @@ idepmac_sleep_drive(ide_drive_t *drive, int idx, unsigned long base)
return;
else {
/* Lock HW group */
set_bit(IDE_BUSY, &HWGROUP(drive)->flags);
set_bit(IDE_BUSY, &drive->channel->active);
/* Stop the device */
idepmac_sleep_device(drive, idx, base);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
}
}
static void
idepmac_wake_drive(ide_drive_t *drive, unsigned long base)
idepmac_wake_drive(struct ata_device *drive, unsigned long base)
{
int j;
......@@ -1669,7 +1671,7 @@ idepmac_wake_drive(ide_drive_t *drive, unsigned long base)
/* We resume processing on the HW group */
spin_lock_irq(&ide_lock);
clear_bit(IDE_BUSY, &HWGROUP(drive)->flags);
clear_bit(IDE_BUSY, &drive->channel->active);
if (!list_empty(&drive->queue.queue_head))
do_ide_request(&drive->queue);
spin_unlock_irq(&ide_lock);
......@@ -1750,7 +1752,7 @@ idepmac_notify_sleep(struct pmu_sleep_notifier *self, int when)
hwif = &ide_hwifs[i];
for (dn=0; dn<MAX_DRIVES; dn++) {
ide_drive_t *drive = &hwif->drives[dn];
struct ata_device *drive = &hwif->drives[dn];
if (!drive->present)
continue;
/* We don't have re-configured DMA yet */
......
......@@ -578,15 +578,15 @@ static int init_irq(struct ata_channel *ch)
{
unsigned long flags;
int i;
ide_hwgroup_t *hwgroup;
ide_hwgroup_t *new_hwgroup;
spinlock_t *lock;
spinlock_t *new_lock;
struct ata_channel *match = NULL;
/* Spare allocation before sleep. */
new_hwgroup = kmalloc(sizeof(*hwgroup), GFP_KERNEL);
new_lock = kmalloc(sizeof(*lock), GFP_KERNEL);
spin_lock_irqsave(&ide_lock, flags);
ch->hwgroup = NULL;
ch->lock = NULL;
#if MAX_HWIFS > 1
/*
......@@ -596,7 +596,7 @@ static int init_irq(struct ata_channel *ch)
struct ata_channel *h = &ide_hwifs[i];
/* scan only initialized channels */
if (!h->hwgroup)
if (!h->lock)
continue;
if (ch->irq != h->irq)
......@@ -606,7 +606,7 @@ static int init_irq(struct ata_channel *ch)
if (ch->chipset != ide_pci || h->chipset != ide_pci ||
ch->serialized || h->serialized) {
if (match && match->hwgroup && match->hwgroup != h->hwgroup)
if (match && match->lock && match->lock != h->lock)
printk("%s: potential irq problem with %s and %s\n", ch->name, h->name, match->name);
/* don't undo a prior perfect match */
if (!match || match->irq != ch->irq)
......@@ -615,19 +615,20 @@ static int init_irq(struct ata_channel *ch)
}
#endif
/*
* If we are still without a hwgroup, then form a new one
* If we are still without a lock group, then form a new one
*/
if (match) {
hwgroup = match->hwgroup;
if(new_hwgroup)
kfree(new_hwgroup);
} else {
hwgroup = new_hwgroup;
if (!hwgroup) {
if (!match) {
lock = new_lock;
if (!lock) {
spin_unlock_irqrestore(&ide_lock, flags);
return 1;
}
memset(hwgroup, 0, sizeof(*hwgroup));
spin_lock_init(lock);
} else {
lock = match->lock;
if(new_lock)
kfree(new_lock);
}
/*
......@@ -645,7 +646,8 @@ static int init_irq(struct ata_channel *ch)
if (request_irq(ch->irq, &ata_irq_request, sa, ch->name, ch)) {
if (!match)
kfree(hwgroup);
kfree(lock);
spin_unlock_irqrestore(&ide_lock, flags);
return 1;
......@@ -653,9 +655,9 @@ static int init_irq(struct ata_channel *ch)
}
/*
* Everything is okay. Tag us as member of this hardware group.
* Everything is okay. Tag us as member of this lock group.
*/
ch->hwgroup = hwgroup;
ch->lock = lock;
init_timer(&ch->timer);
ch->timer.function = &ide_timer_expiry;
......@@ -678,7 +680,7 @@ static int init_irq(struct ata_channel *ch)
q = &drive->queue;
q->queuedata = drive->channel;
blk_init_queue(q, do_ide_request, &ide_lock);
blk_init_queue(q, do_ide_request, drive->channel->lock);
blk_queue_segment_boundary(q, 0xffff);
/* ATA can do up to 128K per request, pdc4030 needs smaller limit */
......
......@@ -61,41 +61,6 @@ static inline void ide_unmap_rq(struct request *rq, char *to,
* Data transfer functions for polled IO.
*/
#if SUPPORT_VLB_SYNC
/*
* Some localbus EIDE interfaces require a special access sequence
* when using 32-bit I/O instructions to transfer data. We call this
* the "vlb_sync" sequence, which consists of three successive reads
* of the sector count register location, with interrupts disabled
* to ensure that the reads all happen together.
*/
static void ata_read_vlb(struct ata_device *drive, void *buffer, unsigned int wcount)
{
unsigned long flags;
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
IN_BYTE(IDE_NSECTOR_REG);
IN_BYTE(IDE_NSECTOR_REG);
IN_BYTE(IDE_NSECTOR_REG);
insl(IDE_DATA_REG, buffer, wcount);
__restore_flags(flags); /* local CPU only */
}
static void ata_write_vlb(struct ata_device *drive, void *buffer, unsigned int wcount)
{
unsigned long flags;
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
IN_BYTE(IDE_NSECTOR_REG);
IN_BYTE(IDE_NSECTOR_REG);
IN_BYTE(IDE_NSECTOR_REG);
outsl(IDE_DATA_REG, buffer, wcount);
__restore_flags(flags); /* local CPU only */
}
#endif
static void ata_read_32(struct ata_device *drive, void *buffer, unsigned int wcount)
{
insl(IDE_DATA_REG, buffer, wcount);
......@@ -157,11 +122,6 @@ void ata_read(struct ata_device *drive, void *buffer, unsigned int wcount)
io_32bit = drive->channel->io_32bit;
if (io_32bit) {
#if SUPPORT_VLB_SYNC
if (io_32bit & 2)
ata_read_vlb(drive, buffer, wcount);
else
#endif
ata_read_32(drive, buffer, wcount);
} else {
#if SUPPORT_SLOW_DATA_PORTS
......@@ -188,11 +148,6 @@ void ata_write(struct ata_device *drive, void *buffer, unsigned int wcount)
io_32bit = drive->channel->io_32bit;
if (io_32bit) {
#if SUPPORT_VLB_SYNC
if (io_32bit & 2)
ata_write_vlb(drive, buffer, wcount);
else
#endif
ata_write_32(drive, buffer, wcount);
} else {
#if SUPPORT_SLOW_DATA_PORTS
......@@ -320,7 +275,6 @@ static ide_startstop_t pre_task_mulout_intr(struct ata_device *drive, struct req
static ide_startstop_t task_mulout_intr(struct ata_device *drive, struct request *rq)
{
u8 stat = GET_STAT();
ide_hwgroup_t *hwgroup = HWGROUP(drive);
int mcount = drive->mult_count;
ide_startstop_t startstop;
......@@ -349,7 +303,7 @@ static ide_startstop_t task_mulout_intr(struct ata_device *drive, struct request
}
/* no data yet, so wait for another interrupt */
if (hwgroup->handler == NULL)
if (!drive->channel->handler)
ide_set_handler(drive, task_mulout_intr, WAIT_CMD, NULL);
return ide_started;
......@@ -392,7 +346,7 @@ static ide_startstop_t task_mulout_intr(struct ata_device *drive, struct request
} while (mcount);
rq->errors = 0;
if (hwgroup->handler == NULL)
if (!drive->channel->handler)
ide_set_handler(drive, task_mulout_intr, WAIT_CMD, NULL);
return ide_started;
......
......@@ -290,7 +290,7 @@ int __ide_end_request(struct ata_device *drive, struct request *rq, int uptodate
unsigned long flags;
int ret = 1;
spin_lock_irqsave(&ide_lock, flags);
spin_lock_irqsave(drive->channel->lock, flags);
BUG_ON(!(rq->flags & REQ_STARTED));
......@@ -322,7 +322,8 @@ int __ide_end_request(struct ata_device *drive, struct request *rq, int uptodate
ret = 0;
}
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(drive->channel->lock, flags);
return ret;
}
......@@ -338,18 +339,19 @@ void ide_set_handler(struct ata_device *drive, ata_handler_t handler,
{
unsigned long flags;
struct ata_channel *ch = drive->channel;
ide_hwgroup_t *hwgroup = ch->hwgroup;
spin_lock_irqsave(&ide_lock, flags);
if (hwgroup->handler != NULL) {
spin_lock_irqsave(ch->lock, flags);
if (ch->handler != NULL) {
printk("%s: ide_set_handler: handler not null; old=%p, new=%p, from %p\n",
drive->name, hwgroup->handler, handler, __builtin_return_address(0));
drive->name, ch->handler, handler, __builtin_return_address(0));
}
hwgroup->handler = handler;
ch->handler = handler;
ch->expiry = expiry;
ch->timer.expires = jiffies + timeout;
add_timer(&ch->timer);
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(ch->lock, flags);
}
static void check_crc_errors(struct ata_device *drive)
......@@ -1067,20 +1069,21 @@ static ide_startstop_t start_request(struct ata_device *drive, struct request *r
ide_startstop_t restart_request(struct ata_device *drive)
{
struct ata_channel *ch = drive->channel;
ide_hwgroup_t *hwgroup = ch->hwgroup;
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
hwgroup->handler = NULL;
spin_lock_irqsave(ch->lock, flags);
ch->handler = NULL;
del_timer(&ch->timer);
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(ch->lock, flags);
return start_request(drive, drive->rq);
}
/*
* This is used by a drive to give excess bandwidth back to the hwgroup by
* sleeping for timeout jiffies.
* This is used by a drive to give excess bandwidth back by sleeping for
* timeout jiffies.
*/
void ide_stall_queue(struct ata_device *drive, unsigned long timeout)
{
......@@ -1096,20 +1099,10 @@ void ide_stall_queue(struct ata_device *drive, unsigned long timeout)
static unsigned long longest_sleep(struct ata_channel *channel)
{
unsigned long sleep = 0;
int i;
for (i = 0; i < MAX_HWIFS; ++i) {
int unit;
struct ata_channel *ch = &ide_hwifs[i];
if (!ch->present)
continue;
if (ch->hwgroup != channel->hwgroup)
continue;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
struct ata_device *drive = &ch->drives[unit];
struct ata_device *drive = &channel->drives[unit];
if (!drive->present)
continue;
......@@ -1120,32 +1113,23 @@ static unsigned long longest_sleep(struct ata_channel *channel)
if (drive->sleep && (!sleep || time_after(sleep, drive->sleep)))
sleep = drive->sleep;
}
}
return sleep;
}
/*
* Select the next device which will be serviced.
* Select the next device which will be serviced. This selects onlt between
* devices on the same channel, since everything else will be scheduled on the
* queue level.
*/
static struct ata_device *choose_urgent_device(struct ata_channel *channel)
{
struct ata_device *choice = NULL;
unsigned long sleep = 0;
int i;
for (i = 0; i < MAX_HWIFS; ++i) {
int unit;
struct ata_channel *ch = &ide_hwifs[i];
if (!ch->present)
continue;
if (ch->hwgroup != channel->hwgroup)
continue;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
struct ata_device *drive = &ch->drives[unit];
struct ata_device *drive = &channel->drives[unit];
if (!drive->present)
continue;
......@@ -1168,7 +1152,6 @@ static struct ata_device *choose_urgent_device(struct ata_channel *channel)
choice = drive;
}
}
}
if (choice)
return choice;
......@@ -1274,11 +1257,13 @@ static void queue_commands(struct ata_device *drive, int masked_irq)
if (masked_irq && drive->channel->irq != masked_irq)
disable_irq_nosync(drive->channel->irq);
spin_unlock(&ide_lock);
spin_unlock(drive->channel->lock);
ide__sti(); /* allow other IRQs while we start this request */
startstop = start_request(drive, rq);
spin_lock_irq(&ide_lock);
spin_lock_irq(drive->channel->lock);
if (masked_irq && drive->channel->irq != masked_irq)
enable_irq(drive->channel->irq);
......@@ -1301,38 +1286,12 @@ static void queue_commands(struct ata_device *drive, int masked_irq)
/*
* Issue a new request.
* Caller must have already done spin_lock_irqsave(&ide_lock, ...)
*
* A hwgroup is a serialized group of IDE interfaces. Usually there is
* exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
* may have both interfaces in a single hwgroup to "serialize" access.
* Or possibly multiple ISA interfaces can share a common IRQ by being grouped
* together into one hwgroup for serialized access.
*
* Note also that several hwgroups can end up sharing a single IRQ,
* possibly along with many other devices. This is especially common in
* PCI-based systems with off-board IDE controller cards.
*
* The IDE driver uses the queue spinlock to protect access to the request
* queues.
*
* The first thread into the driver for a particular hwgroup sets the
* hwgroup->flags IDE_BUSY flag to indicate that this hwgroup is now active,
* and then initiates processing of the top request from the request queue.
*
* Other threads attempting entry notice the busy setting, and will simply
* queue their new requests and exit immediately. Note that hwgroup->flags
* remains busy even when the driver is merely awaiting the next interrupt.
* Thus, the meaning is "this hwgroup is busy processing a request".
*
* When processing of a request completes, the completing thread or IRQ-handler
* will start the next request from the queue. If no more work remains,
* the driver will clear the hwgroup->flags IDE_BUSY flag and exit.
* Caller must have already done spin_lock_irqsave(channel->lock, ...)
*/
static void ide_do_request(struct ata_channel *channel, int masked_irq)
{
ide_get_lock(&irq_lock, ata_irq_request, hwgroup);/* for atari only: POSSIBLY BROKEN HERE(?) */
__cli(); /* necessary paranoia: ensure IRQs are masked on local CPU */
// __cli(); /* necessary paranoia: ensure IRQs are masked on local CPU */
while (!test_and_set_bit(IDE_BUSY, &channel->active)) {
struct ata_channel *ch;
......@@ -1362,6 +1321,7 @@ static void ide_do_request(struct ata_channel *channel, int masked_irq)
queue_commands(drive, masked_irq);
}
}
void do_ide_request(request_queue_t *q)
......@@ -1413,7 +1373,6 @@ static void dma_timeout_retry(struct ata_device *drive, struct request *rq)
void ide_timer_expiry(unsigned long data)
{
struct ata_channel *ch = (struct ata_channel *) data;
ide_hwgroup_t *hwgroup = ch->hwgroup;
ata_handler_t *handler;
ata_expiry_t *expiry;
unsigned long flags;
......@@ -1424,10 +1383,11 @@ void ide_timer_expiry(unsigned long data)
* worth mentioning.
*/
spin_lock_irqsave(&ide_lock, flags);
spin_lock_irqsave(ch->lock, flags);
del_timer(&ch->timer);
if ((handler = hwgroup->handler) == NULL) {
handler = ch->handler;
if (!handler) {
/*
* Either a marginal timeout occurred (got the interrupt just
......@@ -1441,31 +1401,35 @@ void ide_timer_expiry(unsigned long data)
} else {
struct ata_device *drive = ch->drive;
if (!drive) {
printk("ide_timer_expiry: hwgroup->drive was NULL\n");
hwgroup->handler = NULL;
printk(KERN_ERR "ide_timer_expiry: IRQ handler was NULL\n");
ch->handler = NULL;
} else {
ide_startstop_t startstop;
/* paranoia */
if (!test_and_set_bit(IDE_BUSY, &ch->active))
printk("%s: ide_timer_expiry: hwgroup was not busy??\n", drive->name);
printk(KERN_ERR "%s: ide_timer_expiry: IRQ handler was not busy??\n", drive->name);
if ((expiry = ch->expiry) != NULL) {
/* continue */
if ((wait = expiry(drive, drive->rq)) != 0) {
/* reengage timer */
ch->timer.expires = jiffies + wait;
add_timer(&ch->timer);
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(ch->lock, flags);
return;
}
}
hwgroup->handler = NULL;
ch->handler = NULL;
/*
* We need to simulate a real interrupt when invoking
* the handler() function, which means we need to globally
* mask the specific IRQ:
*/
spin_unlock(&ide_lock);
spin_unlock(ch->lock);
ch = drive->channel;
#if DISABLE_IRQ_NOSYNC
disable_irq_nosync(ch->irq);
......@@ -1490,7 +1454,9 @@ void ide_timer_expiry(unsigned long data)
}
set_recovery_timer(ch);
enable_irq(ch->irq);
spin_lock_irq(&ide_lock);
spin_lock_irq(ch->lock);
if (startstop == ide_stopped)
clear_bit(IDE_BUSY, &ch->active);
}
......@@ -1498,7 +1464,7 @@ void ide_timer_expiry(unsigned long data)
ide_do_request(ch->drive->channel, 0);
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(ch->lock, flags);
}
/*
......@@ -1560,14 +1526,12 @@ static void unexpected_irq(int irq)
void ata_irq_request(int irq, void *data, struct pt_regs *regs)
{
struct ata_channel *ch = data;
ide_hwgroup_t *hwgroup = ch->hwgroup;
unsigned long flags;
struct ata_device *drive;
ata_handler_t *handler = hwgroup->handler;
ata_handler_t *handler = ch->handler;
ide_startstop_t startstop;
spin_lock_irqsave(&ide_lock, flags);
spin_lock_irqsave(ch->lock, flags);
if (!ide_ack_intr(ch))
goto out_lock;
......@@ -1619,16 +1583,17 @@ void ata_irq_request(int irq, void *data, struct pt_regs *regs)
/* paranoia */
if (!test_and_set_bit(IDE_BUSY, &ch->active))
printk(KERN_ERR "%s: %s: hwgroup was not busy!?\n", drive->name, __FUNCTION__);
hwgroup->handler = NULL;
ch->handler = NULL;
del_timer(&ch->timer);
spin_unlock(&ide_lock);
spin_unlock(ch->lock);
if (ch->unmask)
ide__sti(); /* local CPU only */
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive, drive->rq);
spin_lock_irq(&ide_lock);
spin_lock_irq(ch->lock);
/*
* Note that handler() may have set things up for another
......@@ -1639,7 +1604,7 @@ void ata_irq_request(int irq, void *data, struct pt_regs *regs)
*/
set_recovery_timer(drive->channel);
if (startstop == ide_stopped) {
if (hwgroup->handler == NULL) { /* paranoia */
if (!ch->handler) { /* paranoia */
clear_bit(IDE_BUSY, &ch->active);
ide_do_request(ch, ch->irq);
} else {
......@@ -1649,7 +1614,7 @@ void ata_irq_request(int irq, void *data, struct pt_regs *regs)
queue_commands(drive, ch->irq);
out_lock:
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(ch->lock, flags);
}
/*
......@@ -1725,7 +1690,9 @@ int ide_do_drive_cmd(struct ata_device *drive, struct request *rq, ide_action_t
rq->rq_dev = mk_kdev(major,(drive->select.b.unit)<<PARTN_BITS);
if (action == ide_wait)
rq->waiting = &wait;
spin_lock_irqsave(&ide_lock, flags);
spin_lock_irqsave(drive->channel->lock, flags);
if (blk_queue_empty(&drive->queue) || action == ide_preempt) {
if (action == ide_preempt)
drive->rq = NULL;
......@@ -1737,7 +1704,9 @@ int ide_do_drive_cmd(struct ata_device *drive, struct request *rq, ide_action_t
}
q->elevator.elevator_add_req_fn(q, rq, queue_head);
ide_do_request(drive->channel, 0);
spin_unlock_irqrestore(&ide_lock, flags);
spin_unlock_irqrestore(drive->channel->lock, flags);
if (action == ide_wait) {
wait_for_completion(&wait); /* wait for it to be serviced */
return rq->errors ? -EIO : 0; /* return -EIO if errors */
......@@ -1764,15 +1733,19 @@ int ide_revalidate_disk(kdev_t i_rdev)
if ((drive = get_info_ptr(i_rdev)) == NULL)
return -ENODEV;
/* FIXME: The locking here doesn't make the slightest sense! */
spin_lock_irqsave(&ide_lock, flags);
if (drive->busy || (drive->usage > 1)) {
spin_unlock_irqrestore(&ide_lock, flags);
return -EBUSY;
}
drive->busy = 1;
MOD_INC_USE_COUNT;
spin_unlock_irqrestore(&ide_lock, flags);
res = wipe_partitions(i_rdev);
......@@ -1789,6 +1762,7 @@ int ide_revalidate_disk(kdev_t i_rdev)
drive->busy = 0;
wake_up(&drive->wqueue);
MOD_DEC_USE_COUNT;
return res;
}
......@@ -1912,7 +1886,7 @@ void ide_unregister(struct ata_channel *ch)
{
struct gendisk *gd;
struct ata_device *d;
ide_hwgroup_t *hwgroup;
spinlock_t *lock;
int unit;
int i;
unsigned long flags;
......@@ -1950,6 +1924,7 @@ void ide_unregister(struct ata_channel *ch)
* All clear? Then blow away the buffer cache
*/
spin_unlock_irqrestore(&ide_lock, flags);
for (unit = 0; unit < MAX_DRIVES; ++unit) {
struct ata_device * drive = &ch->drives[unit];
......@@ -1964,6 +1939,7 @@ void ide_unregister(struct ata_channel *ch)
}
}
}
spin_lock_irqsave(&ide_lock, flags);
/*
......@@ -1987,10 +1963,10 @@ void ide_unregister(struct ata_channel *ch)
#endif
/*
* Remove us from the hwgroup.
* Remove us from the lock group.
*/
hwgroup = ch->hwgroup;
lock = ch->lock;
d = ch->drive;
for (i = 0; i < MAX_DRIVES; ++i) {
struct ata_device *drive = &ch->drives[i];
......@@ -2020,7 +1996,7 @@ void ide_unregister(struct ata_channel *ch)
/*
* Free the irq if we were the only channel using it.
*
* Free the hwgroup if we were the only member.
* Free the lock group if we were the only member.
*/
n_irq = n_ch = 0;
for (i = 0; i < MAX_HWIFS; ++i) {
......@@ -2031,14 +2007,14 @@ void ide_unregister(struct ata_channel *ch)
if (tmp->irq == ch->irq)
++n_irq;
if (tmp->hwgroup == ch->hwgroup)
if (tmp->lock == ch->lock)
++n_ch;
}
if (n_irq == 1)
free_irq(ch->irq, ch->hwgroup);
free_irq(ch->irq, ch);
if (n_ch == 1) {
kfree(ch->hwgroup);
ch->hwgroup = NULL;
kfree(ch->lock);
ch->lock = NULL;
}
#if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
......@@ -2072,7 +2048,7 @@ void ide_unregister(struct ata_channel *ch)
old = *ch;
init_hwif_data(ch, ch->index);
ch->hwgroup = old.hwgroup;
ch->lock = old.lock;
ch->tuneproc = old.tuneproc;
ch->speedproc = old.speedproc;
ch->selectproc = old.selectproc;
......@@ -2218,15 +2194,18 @@ int ide_spin_wait_hwgroup(struct ata_device *drive)
unsigned long timeout = jiffies + (10 * HZ);
spin_lock_irq(&ide_lock);
spin_lock_irq(drive->channel->lock);
while (test_bit(IDE_BUSY, &drive->channel->active)) {
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
if (time_after(jiffies, timeout)) {
printk("%s: channel busy\n", drive->name);
return -EBUSY;
}
spin_lock_irq(&ide_lock);
spin_lock_irq(drive->channel->lock);
}
return 0;
......@@ -2260,12 +2239,6 @@ static int set_pio_mode(struct ata_device *drive, int arg)
if (!drive->channel->tuneproc)
return -ENOSYS;
/* FIXME: This is very much the same kind of problem as we have with
* set_mutlmode() see for a edscription there.
*/
if (HWGROUP(drive)->handler)
return -EBUSY;
if (drive->channel->tuneproc != NULL)
drive->channel->tuneproc(drive, (u8) arg);
......@@ -2334,14 +2307,14 @@ static int ide_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
case HDIO_SET_32BIT: {
int val;
if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
if (arg < 0 || arg > 1)
return -EINVAL;
if (ide_spin_wait_hwgroup(drive))
return -EBUSY;
val = set_io_32bit(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -2356,7 +2329,7 @@ static int ide_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
return -EBUSY;
val = set_pio_mode(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -2382,7 +2355,7 @@ static int ide_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
return -EBUSY;
drive->channel->unmask = arg;
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return 0;
}
......@@ -2406,7 +2379,7 @@ static int ide_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
return -EBUSY;
val = set_using_dma(drive, arg);
spin_unlock_irq(&ide_lock);
spin_unlock_irq(drive->channel->lock);
return val;
}
......@@ -3455,7 +3428,7 @@ static int __init ata_module_init(void)
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
# if defined(__mc68000__) || defined(CONFIG_APUS)
if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) {
ide_get_lock(&irq_lock, NULL, NULL);/* for atari only */
// ide_get_lock(&irq_lock, NULL, NULL);/* for atari only */
disable_irq(ide_hwifs[0].irq); /* disable_irq_nosync ?? */
// disable_irq_nosync(ide_hwifs[0].irq);
}
......
/* -*- linux-c -*-
* linux/drivers/ide/pdc4030.c Version 0.92 Jan 15, 2002
*
* Copyright (C) 1995-2002 Linus Torvalds & authors (see below)
*/
/*
*
* Principal Author/Maintainer: peterd@pnd-pc.demon.co.uk
*
* This file provides support for the second port and cache of Promise
* IDE interfaces, e.g. DC4030VL, DC4030VL-1 and DC4030VL-2.
* VLB based IDE interfaces, e.g. DC4030VL, DC4030VL-1 and DC4030VL-2.
*
* Thanks are due to Mark Lord for advice and patiently answering stupid
* questions, and all those mugs^H^H^H^Hbrave souls who've tested this,
......@@ -94,20 +91,85 @@
#include "pdc4030.h"
#if SUPPORT_VLB_SYNC != 1
#error This driver will not work unless SUPPORT_VLB_SYNC is 1
#endif
/*
* Data transfer functions for polled IO.
*/
/*
* Some localbus EIDE interfaces require a special access sequence
* when using 32-bit I/O instructions to transfer data. We call this
* the "vlb_sync" sequence, which consists of three successive reads
* of the sector count register location, with interrupts disabled
* to ensure that the reads all happen together.
*/
static void read_vlb(struct ata_device *drive, void *buffer, unsigned int wcount)
{
unsigned long flags;
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
inb(IDE_NSECTOR_REG);
inb(IDE_NSECTOR_REG);
inb(IDE_NSECTOR_REG);
insl(IDE_DATA_REG, buffer, wcount);
__restore_flags(flags); /* local CPU only */
}
static void write_vlb(struct ata_device *drive, void *buffer, unsigned int wcount)
{
unsigned long flags;
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
inb(IDE_NSECTOR_REG);
inb(IDE_NSECTOR_REG);
inb(IDE_NSECTOR_REG);
outsl(IDE_DATA_REG, buffer, wcount);
__restore_flags(flags); /* local CPU only */
}
static void read_16(struct ata_device *drive, void *buffer, unsigned int wcount)
{
insw(IDE_DATA_REG, buffer, wcount<<1);
}
static void write_16(struct ata_device *drive, void *buffer, unsigned int wcount)
{
outsw(IDE_DATA_REG, buffer, wcount<<1);
}
/*
* This is used for most PIO data transfers *from* the device.
*/
static void promise_read(struct ata_device *drive, void *buffer, unsigned int wcount)
{
if (drive->channel->io_32bit)
read_vlb(drive, buffer, wcount);
else
read_16(drive, buffer, wcount);
}
/*
* This is used for most PIO data transfers *to* the device interface.
*/
static void promise_write(struct ata_device *drive, void *buffer, unsigned int wcount)
{
if (drive->channel->io_32bit)
write_vlb(drive, buffer, wcount);
else
write_16(drive, buffer, wcount);
}
/*
* promise_selectproc() is invoked by ide.c
* in preparation for access to the specified drive.
*/
static void promise_selectproc (ide_drive_t *drive)
static void promise_selectproc(struct ata_device *drive)
{
unsigned int number;
u8 number;
number = (drive->channel->unit << 1) + drive->select.b.unit;
OUT_BYTE(number,IDE_FEATURE_REG);
outb(number, IDE_FEATURE_REG);
}
/*
......@@ -115,15 +177,15 @@ static void promise_selectproc (ide_drive_t *drive)
* by command F0. They all have the same success/failure notification -
* 'P' (=0x50) on success, 'p' (=0x70) on failure.
*/
int pdc4030_cmd(ide_drive_t *drive, byte cmd)
int pdc4030_cmd(struct ata_device *drive, byte cmd)
{
unsigned long timeout, timer;
byte status_val;
promise_selectproc(drive); /* redundant? */
OUT_BYTE(0xF3,IDE_SECTOR_REG);
OUT_BYTE(cmd,IDE_SELECT_REG);
OUT_BYTE(PROMISE_EXTENDED_COMMAND,IDE_COMMAND_REG);
outb(0xF3, IDE_SECTOR_REG);
outb(cmd, IDE_SELECT_REG);
outb(PROMISE_EXTENDED_COMMAND, IDE_COMMAND_REG);
timeout = HZ * 10;
timeout += jiffies;
do {
......@@ -134,7 +196,7 @@ int pdc4030_cmd(ide_drive_t *drive, byte cmd)
/* Delays at least 10ms to give interface a chance */
timer = jiffies + (HZ + 99)/100 + 1;
while (time_after(timer, jiffies));
status_val = IN_BYTE(IDE_SECTOR_REG);
status_val = inb(IDE_SECTOR_REG);
} while (status_val != 0x50 && status_val != 0x70);
if(status_val == 0x50)
......@@ -146,7 +208,7 @@ int pdc4030_cmd(ide_drive_t *drive, byte cmd)
/*
* pdc4030_identify sends a vendor-specific IDENTIFY command to the drive
*/
int pdc4030_identify(ide_drive_t *drive)
int pdc4030_identify(struct ata_device *drive)
{
return pdc4030_cmd(drive, PROMISE_IDENTIFY);
}
......@@ -164,24 +226,25 @@ void __init init_pdc4030 (void)
*/
int __init setup_pdc4030(struct ata_channel *hwif)
{
ide_drive_t *drive;
struct ata_device *drive;
struct ata_channel *hwif2;
struct dc_ident ident;
int i;
ide_startstop_t startstop;
if (!hwif) return 0;
if (!hwif)
return 0;
drive = &hwif->drives[0];
hwif2 = &ide_hwifs[hwif->index+1];
if (hwif->chipset == ide_pdc4030) /* we've already been found ! */
return 1;
if (IN_BYTE(IDE_NSECTOR_REG) == 0xFF || IN_BYTE(IDE_SECTOR_REG) == 0xFF) {
if (inb(IDE_NSECTOR_REG) == 0xFF || inb(IDE_SECTOR_REG) == 0xFF) {
return 0;
}
if (IDE_CONTROL_REG)
OUT_BYTE(0x08,IDE_CONTROL_REG);
outb(0x08, IDE_CONTROL_REG);
if (pdc4030_cmd(drive,PROMISE_GET_CONFIG)) {
return 0;
}
......@@ -190,7 +253,7 @@ int __init setup_pdc4030(struct ata_channel *hwif)
"%s: Failed Promise read config!\n",hwif->name);
return 0;
}
ata_read(drive, &ident, SECTOR_WORDS);
promise_read(drive, &ident, SECTOR_WORDS);
if (ident.id[1] != 'P' || ident.id[0] != 'T') {
return 0;
}
......@@ -233,7 +296,9 @@ int __init setup_pdc4030(struct ata_channel *hwif)
hwif->chipset = hwif2->chipset = ide_pdc4030;
hwif->unit = ATA_PRIMARY;
hwif2->unit = ATA_SECONDARY;
hwif->selectproc = hwif2->selectproc = &promise_selectproc;
hwif->ata_read = hwif2->ata_read = promise_read;
hwif->ata_write = hwif2->ata_write = promise_write;
hwif->selectproc = hwif2->selectproc = promise_selectproc;
hwif->serialized = hwif2->serialized = 1;
/* Shift the remaining interfaces up by one */
......@@ -269,20 +334,20 @@ int __init setup_pdc4030(struct ata_channel *hwif)
*/
int __init detect_pdc4030(struct ata_channel *hwif)
{
ide_drive_t *drive = &hwif->drives[0];
struct ata_device *drive = &hwif->drives[0];
if (IDE_DATA_REG == 0) { /* Skip test for non-existent interface */
return 0;
}
OUT_BYTE(0xF3, IDE_SECTOR_REG);
OUT_BYTE(0x14, IDE_SELECT_REG);
OUT_BYTE(PROMISE_EXTENDED_COMMAND, IDE_COMMAND_REG);
outb(0xF3, IDE_SECTOR_REG);
outb(0x14, IDE_SELECT_REG);
outb(PROMISE_EXTENDED_COMMAND, IDE_COMMAND_REG);
ide_delay_50ms();
if (IN_BYTE(IDE_ERROR_REG) == 'P' &&
IN_BYTE(IDE_NSECTOR_REG) == 'T' &&
IN_BYTE(IDE_SECTOR_REG) == 'I') {
if (inb(IDE_ERROR_REG) == 'P' &&
inb(IDE_NSECTOR_REG) == 'T' &&
inb(IDE_SECTOR_REG) == 'I') {
return 1;
} else {
return 0;
......@@ -321,9 +386,9 @@ static ide_startstop_t promise_read_intr(struct ata_device *drive, struct reques
read_again:
do {
sectors_left = IN_BYTE(IDE_NSECTOR_REG);
IN_BYTE(IDE_SECTOR_REG);
} while (IN_BYTE(IDE_NSECTOR_REG) != sectors_left);
sectors_left = inb(IDE_NSECTOR_REG);
inb(IDE_SECTOR_REG);
} while (inb(IDE_NSECTOR_REG) != sectors_left);
sectors_avail = rq->nr_sectors - sectors_left;
if (!sectors_avail)
goto read_again;
......@@ -334,7 +399,7 @@ static ide_startstop_t promise_read_intr(struct ata_device *drive, struct reques
nsect = sectors_avail;
sectors_avail -= nsect;
to = bio_kmap_irq(rq->bio, &flags) + ide_rq_offset(rq);
ata_read(drive, to, nsect * SECTOR_WORDS);
promise_read(drive, to, nsect * SECTOR_WORDS);
#ifdef DEBUG_READ
printk(KERN_DEBUG "%s: promise_read: sectors(%ld-%ld), "
"buf=0x%08lx, rem=%ld\n", drive->name, rq->sector,
......@@ -458,7 +523,7 @@ int promise_multwrite(struct ata_device *drive, struct request *rq, unsigned int
* Ok, we're all setup for the interrupt
* re-entering us on the last transfer.
*/
ata_write(drive, buffer, nsect << 7);
promise_write(drive, buffer, nsect << 7);
bio_kunmap_irq(buffer, &flags);
} while (mcount);
......@@ -472,7 +537,7 @@ static ide_startstop_t promise_write_pollfunc(struct ata_device *drive, struct r
{
struct ata_channel *ch = drive->channel;
if (IN_BYTE(IDE_NSECTOR_REG) != 0) {
if (inb(IDE_NSECTOR_REG) != 0) {
if (time_before(jiffies, ch->poll_timeout)) {
ide_set_handler(drive, promise_write_pollfunc, HZ/100, NULL);
return ide_started; /* continue polling... */
......@@ -496,13 +561,13 @@ static ide_startstop_t promise_write_pollfunc(struct ata_device *drive, struct r
}
/*
* promise_write() transfers a block of one or more sectors of data to a
* drive as part of a disk write operation. All but 4 sectors are transferred
* in the first attempt, then the interface is polled (nicely!) for completion
* before the final 4 sectors are transferred. There is no interrupt generated
* on writes (at least on the DC4030VL-2), we just have to poll for NOT BUSY.
* This transfers a block of one or more sectors of data to a drive as part of
* a disk write operation. All but 4 sectors are transferred in the first
* attempt, then the interface is polled (nicely!) for completion before the
* final 4 sectors are transferred. There is no interrupt generated on writes
* (at least on the DC4030VL-2), we just have to poll for NOT BUSY.
*/
static ide_startstop_t promise_write(struct ata_device *drive, struct request *rq)
static ide_startstop_t promise_do_write(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
......@@ -558,18 +623,18 @@ ide_startstop_t do_pdc4030_io(struct ata_device *drive, struct ata_taskfile *arg
}
if (IDE_CONTROL_REG)
OUT_BYTE(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */
outb(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */
SELECT_MASK(drive->channel, drive, 0);
OUT_BYTE(taskfile->feature, IDE_FEATURE_REG);
OUT_BYTE(taskfile->sector_count, IDE_NSECTOR_REG);
outb(taskfile->feature, IDE_FEATURE_REG);
outb(taskfile->sector_count, IDE_NSECTOR_REG);
/* refers to number of sectors to transfer */
OUT_BYTE(taskfile->sector_number, IDE_SECTOR_REG);
outb(taskfile->sector_number, IDE_SECTOR_REG);
/* refers to sector offset or start sector */
OUT_BYTE(taskfile->low_cylinder, IDE_LCYL_REG);
OUT_BYTE(taskfile->high_cylinder, IDE_HCYL_REG);
OUT_BYTE(taskfile->device_head, IDE_SELECT_REG);
OUT_BYTE(taskfile->command, IDE_COMMAND_REG);
outb(taskfile->low_cylinder, IDE_LCYL_REG);
outb(taskfile->high_cylinder, IDE_HCYL_REG);
outb(taskfile->device_head, IDE_SELECT_REG);
outb(taskfile->command, IDE_COMMAND_REG);
switch (rq_data_dir(rq)) {
case READ:
......@@ -590,7 +655,7 @@ ide_startstop_t do_pdc4030_io(struct ata_device *drive, struct ata_taskfile *arg
udelay(1);
return promise_read_intr(drive, rq);
}
if (IN_BYTE(IDE_SELECT_REG) & 0x01) {
if (inb(IDE_SELECT_REG) & 0x01) {
#ifdef DEBUG_READ
printk(KERN_DEBUG "%s: read: waiting for "
"interrupt\n", drive->name);
......@@ -621,7 +686,7 @@ ide_startstop_t do_pdc4030_io(struct ata_device *drive, struct ata_taskfile *arg
}
if (!drive->channel->unmask)
__cli(); /* local CPU only */
return promise_write(drive, rq);
return promise_do_write(drive, rq);
}
default:
......
......@@ -83,7 +83,6 @@ static ide_startstop_t tcq_nop_handler(struct ata_device *drive, struct request
static void tcq_invalidate_queue(struct ata_device *drive)
{
struct ata_channel *ch = drive->channel;
ide_hwgroup_t *hwgroup = ch->hwgroup;
request_queue_t *q = &drive->queue;
struct ata_taskfile *args;
struct request *rq;
......@@ -104,7 +103,7 @@ static void tcq_invalidate_queue(struct ata_device *drive)
drive->queue_depth = 1;
clear_bit(IDE_BUSY, &ch->active);
clear_bit(IDE_DMA, &ch->active);
hwgroup->handler = NULL;
ch->handler = NULL;
/*
* Do some internal stuff -- we really need this command to be
......@@ -153,7 +152,6 @@ static void ata_tcq_irq_timeout(unsigned long data)
{
struct ata_device *drive = (struct ata_device *) data;
struct ata_channel *ch = drive->channel;
ide_hwgroup_t *hwgroup = HWGROUP(drive);
unsigned long flags;
printk(KERN_ERR "ATA: %s: timeout waiting for interrupt...\n", __FUNCTION__);
......@@ -161,9 +159,9 @@ static void ata_tcq_irq_timeout(unsigned long data)
spin_lock_irqsave(&ide_lock, flags);
if (test_and_set_bit(IDE_BUSY, &ch->active))
printk(KERN_ERR "ATA: %s: hwgroup not busy\n", __FUNCTION__);
if (hwgroup->handler == NULL)
printk(KERN_ERR "ATA: %s: missing isr!\n", __FUNCTION__);
printk(KERN_ERR "ATA: %s: IRQ handler not busy\n", __FUNCTION__);
if (!ch->handler)
printk(KERN_ERR "ATA: %s: missing ISR!\n", __FUNCTION__);
spin_unlock_irqrestore(&ide_lock, flags);
......@@ -181,7 +179,6 @@ static void ata_tcq_irq_timeout(unsigned long data)
static void set_irq(struct ata_device *drive, ata_handler_t *handler)
{
struct ata_channel *ch = drive->channel;
ide_hwgroup_t *hwgroup = HWGROUP(drive);
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
......@@ -197,8 +194,8 @@ static void set_irq(struct ata_device *drive, ata_handler_t *handler)
ch->timer.function = ata_tcq_irq_timeout;
ch->timer.data = (unsigned long) ch->drive;
mod_timer(&ch->timer, jiffies + 5 * HZ);
ch->handler = handler;
hwgroup->handler = handler;
spin_unlock_irqrestore(&ide_lock, flags);
}
......
......@@ -92,13 +92,11 @@ static void umc_set_speeds (byte speeds[])
out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
tmp = 0;
for (i = 3; i >= 0; i--)
{
for (i = 3; i >= 0; i--) {
tmp = (tmp << 2) | speedtab[1][speeds[i]];
}
out_umc (0xdc,tmp);
for (i = 0;i < 4; i++)
{
for (i = 0;i < 4; i++) {
out_umc (0xd0+i,speedtab[2][speeds[i]]);
out_umc (0xd8+i,speedtab[2][speeds[i]]);
}
......@@ -108,10 +106,9 @@ static void umc_set_speeds (byte speeds[])
speeds[0], speeds[1], speeds[2], speeds[3]);
}
static void tune_umc (ide_drive_t *drive, byte pio)
static void tune_umc(struct ata_device *drive, byte pio)
{
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[drive->channel->index ^ 1].hwgroup;
if (pio == 255)
pio = ata_timing_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
......@@ -121,16 +118,12 @@ static void tune_umc (ide_drive_t *drive, byte pio)
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]);
save_flags(flags); /* all CPUs */
cli(); /* all CPUs */
if (hwgroup && hwgroup->handler != NULL) {
printk("umc8672: other interface is busy: exiting tune_umc()\n");
} else {
current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
umc_set_speeds (current_speeds);
}
restore_flags(flags); /* all CPUs */
}
void __init init_umc8672 (void) /* called from ide.c */
void __init init_umc8672(void) /* called from ide.c */
{
unsigned long flags;
......
......@@ -90,9 +90,6 @@ static __inline__ void ide_init_default_hwifs(void)
/* some configuration options we don't need */
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
#undef SUPPORT_SLOW_DATA_PORTS
#define SUPPORT_SLOW_DATA_PORTS 0
......
......@@ -83,9 +83,6 @@ static __inline__ void ide_init_default_hwifs(void)
#undef SUPPORT_SLOW_DATA_PORTS
#define SUPPORT_SLOW_DATA_PORTS 0
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
/* this definition is used only on startup .. */
#undef HD_DATA
#define HD_DATA NULL
......
......@@ -65,9 +65,6 @@ static __inline__ void ide_init_default_hwifs(void)
#endif
}
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
#endif /* __KERNEL__ */
#endif /* __ASM_IDE_H */
......@@ -43,8 +43,6 @@ extern struct ide_machdep_calls ppc_ide_md;
#undef SUPPORT_SLOW_DATA_PORTS
#define SUPPORT_SLOW_DATA_PORTS 0
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
#define ide__sti() __sti()
......
......@@ -76,9 +76,6 @@ static __inline__ void ide_init_default_hwifs(void)
#undef SUPPORT_SLOW_DATA_PORTS
#define SUPPORT_SLOW_DATA_PORTS 0
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
#undef HD_DATA
#define HD_DATA ((ide_ioreg_t)0)
......
......@@ -72,9 +72,6 @@ static __inline__ void ide_init_default_hwifs(void)
#undef SUPPORT_SLOW_DATA_PORTS
#define SUPPORT_SLOW_DATA_PORTS 0
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
#undef HD_DATA
#define HD_DATA ((ide_ioreg_t)0)
......
......@@ -40,9 +40,6 @@
/* Right now this is only needed by a promise controlled.
*/
#ifndef SUPPORT_VLB_SYNC /* 1 to support weird 32-bit chips */
# define SUPPORT_VLB_SYNC 1 /* 0 to reduce kernel size */
#endif
#ifndef DISK_RECOVERY_TIME /* off=0; on=access_delay_time */
# define DISK_RECOVERY_TIME 0 /* for hardware that needs it */
#endif
......@@ -74,8 +71,6 @@ typedef unsigned char byte; /* used everywhere */
*/
#define DMA_PIO_RETRY 1 /* retrying in PIO */
#define HWGROUP(drive) (drive->channel->hwgroup)
/*
* Definitions for accessing IDE controller registers
*/
......@@ -444,18 +439,16 @@ enum {
IDE_DMA /* DMA in progress */
};
typedef struct hwgroup_s {
/* FIXME: We should look for busy request queues instead of looking at
* the !NULL state of this field.
*/
ide_startstop_t (*handler)(struct ata_device *, struct request *); /* irq handler, if active */
} ide_hwgroup_t;
struct ata_channel {
struct device dev; /* device handle */
int unit; /* channel number */
struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
/* This lock is used to serialize requests on the same device queue or
* between differen queues sharing the same irq line.
*/
spinlock_t *lock;
ide_startstop_t (*handler)(struct ata_device *, struct request *); /* irq handler, if active */
struct timer_list timer; /* failsafe timer */
int (*expiry)(struct ata_device *, struct request *); /* irq handler, if active */
unsigned long poll_timeout; /* timeout value during polled operations */
......@@ -777,11 +770,7 @@ extern int set_transfer(struct ata_device *, struct ata_taskfile *);
extern int system_bus_speed;
/*
* ide_stall_queue() can be used by a drive to give excess bandwidth back
* to the hwgroup by sleeping for timeout jiffies.
*/
void ide_stall_queue(struct ata_device *, unsigned long);
extern void ide_stall_queue(struct ata_device *, unsigned long);
/*
* CompactFlash cards and their brethern pretend to be removable hard disks,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment