cxgb4: always sync access when flashing PHY firmware

Access to on-chip memory for flashing PHY firmware must always
be synchronized. So, ensure the callers take on-chip memory lock.

Also fixes following sparse warning:
sge.c:1641:26: warning: context imbalance in 't4_load_phy_fw' -
different lock contexts for basic block

Fixes: 01b69614 ("cxgb4: Add PHY firmware support for T420-BT cards")
Fixes: 4ee339e1 ("cxgb4: add support to flash PHY image")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4.h

@@ -1813,8 +1813,7 @@ int t4_get_pfres(struct adapter *adapter);
 int t4_read_flash(struct adapter *adapter, unsigned int addr,
 		  unsigned int nwords, u32 *data, int byte_oriented);
 int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size);
-int t4_load_phy_fw(struct adapter *adap,
-		   int win, spinlock_t *lock,
+int t4_load_phy_fw(struct adapter *adap, int win,
 		   int (*phy_fw_version)(const u8 *, size_t),
 		   const u8 *phy_fw_data, size_t phy_fw_size);
 int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver);

drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c

@@ -1305,8 +1305,9 @@ static int cxgb4_ethtool_flash_phy(struct net_device *netdev,
 		return ret;
 	}
 
-	ret = t4_load_phy_fw(adap, MEMWIN_NIC, &adap->win0_lock,
-			     NULL, data, size);
+	spin_lock_bh(&adap->win0_lock);
+	ret = t4_load_phy_fw(adap, MEMWIN_NIC, NULL, data, size);
+	spin_unlock_bh(&adap->win0_lock);
 	if (ret)
 		dev_err(adap->pdev_dev, "Failed to load PHY FW\n");
 

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

@@ -4146,9 +4146,10 @@ static int adap_init0_phy(struct adapter *adap)
 
 	/* Load PHY Firmware onto adapter.
 	 */
-	ret = t4_load_phy_fw(adap, MEMWIN_NIC, &adap->win0_lock,
-			     phy_info->phy_fw_version,
+	spin_lock_bh(&adap->win0_lock);
+	ret = t4_load_phy_fw(adap, MEMWIN_NIC, phy_info->phy_fw_version,
 			     (u8 *)phyf->data, phyf->size);
+	spin_unlock_bh(&adap->win0_lock);
 	if (ret < 0)
 		dev_err(adap->pdev_dev, "PHY Firmware transfer error %d\n",
 			-ret);

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -3752,7 +3752,6 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
  *	t4_load_phy_fw - download port PHY firmware
  *	@adap: the adapter
  *	@win: the PCI-E Memory Window index to use for t4_memory_rw()
- *	@win_lock: the lock to use to guard the memory copy
  *	@phy_fw_version: function to check PHY firmware versions
  *	@phy_fw_data: the PHY firmware image to write
  *	@phy_fw_size: image size
@@ -3761,9 +3760,7 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
  *	@phy_fw_version is supplied, then it will be used to determine if
  *	it's necessary to perform the transfer by comparing the version
  *	of any existing adapter PHY firmware with that of the passed in
- *	PHY firmware image.  If @win_lock is non-NULL then it will be used
- *	around the call to t4_memory_rw() which transfers the PHY firmware
- *	to the adapter.
+ *	PHY firmware image.
  *
  *	A negative error number will be returned if an error occurs.  If
  *	version number support is available and there's no need to upgrade
@@ -3775,14 +3772,13 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
  *	contents.  Thus, loading PHY firmware on such adapters must happen
  *	after any FW_RESET_CMDs ...
  */
-int t4_load_phy_fw(struct adapter *adap,
-		   int win, spinlock_t *win_lock,
+int t4_load_phy_fw(struct adapter *adap, int win,
 		   int (*phy_fw_version)(const u8 *, size_t),
 		   const u8 *phy_fw_data, size_t phy_fw_size)
 {
+	int cur_phy_fw_ver = 0, new_phy_fw_vers = 0;
 	unsigned long mtype = 0, maddr = 0;
 	u32 param, val;
-	int cur_phy_fw_ver = 0, new_phy_fw_vers = 0;
 	int ret;
 
 	/* If we have version number support, then check to see if the adapter
@@ -3822,13 +3818,9 @@ int t4_load_phy_fw(struct adapter *adap,
 	/* Copy the supplied PHY Firmware image to the adapter memory location
 	 * allocated by the adapter firmware.
 	 */
-	if (win_lock)
-		spin_lock_bh(win_lock);
 	ret = t4_memory_rw(adap, win, mtype, maddr,
 			   phy_fw_size, (__be32 *)phy_fw_data,
 			   T4_MEMORY_WRITE);
-	if (win_lock)
-		spin_unlock_bh(win_lock);
 	if (ret)
 		return ret;