usb: gadget: mv_udc: add iso support

In order to support iso, we need do the following things:
1. fix length for one dtd
2. allow req contains multiple packets for a ISO transfer
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Yu Xu <yuxu@marvell.com>
Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/gadget/mv_udc_core.c

@@ -355,15 +355,22 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 	return retval;
 }
 
-
 static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 		dma_addr_t *dma, int *is_last)
 {
-	u32 temp;
 	struct mv_dtd *dtd;
 	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	u32 temp, mult = 0;
 
 	/* how big will this transfer be? */
+	if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) {
+		dqh = req->ep->dqh;
+		mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS)
+				& 0x3;
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)(mult * req->ep->ep.maxpacket));
+	} else
 		*length = min(req->req.length - req->req.actual,
 				(unsigned)EP_MAX_LENGTH_TRANSFER);
 
@@ -407,6 +414,8 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 	if (*is_last && !req->req.no_interrupt)
 		temp |= DTD_IOC;
 
+	temp |= mult << 10;
+
 	dtd->size_ioc_sts = temp;
 
 	mb();
@@ -718,10 +727,6 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-		if (req->req.length > ep->ep.maxpacket)
-			return -EMSGSIZE;
-	}
 
 	udc = ep->udc;
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)