mtd: nand: Rename nand_chip .dn to .flash_node

Use a more descriptive name for the device_node element in struct nand_chip .
This name matches the element name used for device_node property of a flash
in the spi-nor framework.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drivers/mtd/nand/brcmnand/brcmnand.c

@@ -1792,7 +1792,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 
 	memset(cfg, 0, sizeof(*cfg));
 
-	ret = of_property_read_u32(chip->dn, "brcm,nand-oob-sector-size",
+	ret = of_property_read_u32(chip->flash_node,
+				   "brcm,nand-oob-sector-size",
 				   &oob_sector);
 	if (ret) {
 		/* Use detected size */
@@ -1899,7 +1900,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host)
 	mtd = &host->mtd;
 	chip = &host->chip;
 
-	chip->dn = dn;
+	chip->flash_node = dn;
 	chip->priv = host;
 	mtd->priv = chip;
 	mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "brcmnand.%d",

drivers/mtd/nand/nand_base.c

@@ -3846,8 +3846,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 	struct nand_flash_dev *type;
 	int ret;
 
-	if (chip->dn) {
-		ret = nand_dt_init(mtd, chip, chip->dn);
+	if (chip->flash_node) {
+		ret = nand_dt_init(mtd, chip, chip->flash_node);
 		if (ret)
 			return ret;
 	}

include/linux/mtd/nand.h

@@ -544,7 +544,7 @@ struct nand_buffers {
  *			flash device
  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
  *			flash device.
- * @dn:			[BOARDSPECIFIC] device node describing this instance
+ * @flash_node:		[BOARDSPECIFIC] device node describing this instance
  * @read_byte:		[REPLACEABLE] read one byte from the chip
  * @read_word:		[REPLACEABLE] read one word from the chip
  * @write_byte:		[REPLACEABLE] write a single byte to the chip on the
@@ -647,7 +647,7 @@ struct nand_chip {
 	void __iomem *IO_ADDR_R;
 	void __iomem *IO_ADDR_W;
 
-	struct device_node *dn;
+	struct device_node *flash_node;
 
 	uint8_t (*read_byte)(struct mtd_info *mtd);
 	u16 (*read_word)(struct mtd_info *mtd);