Commit 61c542bf authored by Kukjin Kim's avatar Kukjin Kim

ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c

This patch moves regarding s3c24xx dev files to one devs.c
file in plat-samsung directory and this is required to merge
to plat-samsung.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 6b6844dd
/* arch/arm/mach-s3c2410/include/mach/fb.h
*
* Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
*
* Inspired by pxafb.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_FB_H
#define __ASM_ARM_FB_H
#include <mach/regs-lcd.h>
struct s3c2410fb_hw {
unsigned long lcdcon1;
unsigned long lcdcon2;
unsigned long lcdcon3;
unsigned long lcdcon4;
unsigned long lcdcon5;
};
/* LCD description */
struct s3c2410fb_display {
/* LCD type */
unsigned type;
/* Screen size */
unsigned short width;
unsigned short height;
/* Screen info */
unsigned short xres;
unsigned short yres;
unsigned short bpp;
unsigned pixclock; /* pixclock in picoseconds */
unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
/* lcd configuration registers */
unsigned long lcdcon5;
};
struct s3c2410fb_mach_info {
struct s3c2410fb_display *displays; /* attached diplays info */
unsigned num_displays; /* number of defined displays */
unsigned default_display;
/* GPIOs */
unsigned long gpcup;
unsigned long gpcup_mask;
unsigned long gpccon;
unsigned long gpccon_mask;
unsigned long gpdup;
unsigned long gpdup_mask;
unsigned long gpdcon;
unsigned long gpdcon_mask;
/* lpc3600 control register */
unsigned long lpcsel;
};
extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
#endif /* __ASM_ARM_FB_H */
#include <plat/fb-s3c2410.h>
......@@ -49,6 +49,7 @@
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <plat/nand.h>
......
......@@ -43,6 +43,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>
......
......@@ -14,7 +14,7 @@ obj- :=
obj-y += cpu.o
obj-y += irq.o
obj-y += devs.o
obj-y += dev-uart.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
......
/* linux/arch/arm/plat-s3c24xx/dev-uart.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Base S3C24XX UART resource and platform device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
/* Serial port registrations */
static struct resource s3c2410_uart0_resource[] = {
[0] = {
.start = S3C2410_PA_UART0,
.end = S3C2410_PA_UART0 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX0,
.end = IRQ_S3CUART_ERR0,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s3c2410_uart1_resource[] = {
[0] = {
.start = S3C2410_PA_UART1,
.end = S3C2410_PA_UART1 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX1,
.end = IRQ_S3CUART_ERR1,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s3c2410_uart2_resource[] = {
[0] = {
.start = S3C2410_PA_UART2,
.end = S3C2410_PA_UART2 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX2,
.end = IRQ_S3CUART_ERR2,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s3c2410_uart3_resource[] = {
[0] = {
.start = S3C2443_PA_UART3,
.end = S3C2443_PA_UART3 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX3,
.end = IRQ_S3CUART_ERR3,
.flags = IORESOURCE_IRQ,
},
};
struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
[0] = {
.resources = s3c2410_uart0_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
},
[1] = {
.resources = s3c2410_uart1_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
},
[2] = {
.resources = s3c2410_uart2_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
},
[3] = {
.resources = s3c2410_uart3_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
},
};
# arch/arm/plat-s3c64xx/Makefile
# arch/arm/plat-samsung/Makefile
#
# Copyright 2009 Simtec Electronics
#
......@@ -30,6 +30,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o
obj-y += platformdata.o
obj-y += devs.o
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
......
/* linux/arch/arm/plat-s3c24xx/devs.c
/* linux/arch/arm/plat-samsung/devs.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Base S3C24XX platform device definitions
* Base SAMSUNG platform device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
......@@ -24,147 +23,77 @@
#include <linux/string.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/fb.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/regs-serial.h>
#include <plat/udc.h>
#include <plat/mci.h>
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-spi.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/fb-s3c2410.h>
#include <plat/mci.h>
#include <plat/ts.h>
#include <plat/udc.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
/* Serial port registrations */
static struct resource s3c2410_uart0_resource[] = {
[0] = {
.start = S3C2410_PA_UART0,
.end = S3C2410_PA_UART0 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX0,
.end = IRQ_S3CUART_ERR0,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s3c2410_uart1_resource[] = {
[0] = {
.start = S3C2410_PA_UART1,
.end = S3C2410_PA_UART1 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX1,
.end = IRQ_S3CUART_ERR1,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s3c2410_uart2_resource[] = {
[0] = {
.start = S3C2410_PA_UART2,
.end = S3C2410_PA_UART2 + 0x3fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX2,
.end = IRQ_S3CUART_ERR2,
.flags = IORESOURCE_IRQ,
}
};
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
static struct resource s3c2410_uart3_resource[] = {
/* AC97 */
#ifdef CONFIG_CPU_S3C2440
static struct resource s3c_ac97_resource[] = {
[0] = {
.start = S3C2443_PA_UART3,
.end = S3C2443_PA_UART3 + 0x3fff,
.start = S3C2440_PA_AC97,
.end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX3,
.end = IRQ_S3CUART_ERR3,
.start = IRQ_S3C244x_AC97,
.end = IRQ_S3C244x_AC97,
.flags = IORESOURCE_IRQ,
},
};
struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
[0] = {
.resources = s3c2410_uart0_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
},
[1] = {
.resources = s3c2410_uart1_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
},
[2] = {
.resources = s3c2410_uart2_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
.name = "PCM out",
.start = DMACH_PCM_OUT,
.end = DMACH_PCM_OUT,
.flags = IORESOURCE_DMA,
},
[3] = {
.resources = s3c2410_uart3_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
.name = "PCM in",
.start = DMACH_PCM_IN,
.end = DMACH_PCM_IN,
.flags = IORESOURCE_DMA,
},
};
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {
[0] = {
.start = S3C24XX_PA_LCD,
.end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
[4] = {
.name = "Mic in",
.start = DMACH_MIC_IN,
.end = DMACH_MIC_IN,
.flags = IORESOURCE_DMA,
},
[1] = {
.start = IRQ_LCD,
.end = IRQ_LCD,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
struct platform_device s3c_device_lcd = {
.name = "s3c2410-lcd",
struct platform_device s3c_device_ac97 = {
.name = "samsung-ac97",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_lcd_resource),
.resource = s3c_lcd_resource,
.num_resources = ARRAY_SIZE(s3c_ac97_resource),
.resource = s3c_ac97_resource,
.dev = {
.dma_mask = &s3c_device_lcd_dmamask,
.coherent_dma_mask = 0xffffffffUL
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
#endif /* CONFIG_CPU_S3C2440 */
EXPORT_SYMBOL(s3c_device_lcd);
void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
{
struct s3c2410fb_mach_info *npd;
npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
if (npd) {
npd->displays = kmemdup(pd->displays,
sizeof(struct s3c2410fb_display) * npd->num_displays,
GFP_KERNEL);
if (!npd->displays)
printk(KERN_ERR "no memory for LCD display data\n");
} else {
printk(KERN_ERR "no memory for LCD platform data\n");
}
}
/* Touchscreen */
/* ADC */
static struct resource s3c_ts_resource[] = {
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_adc_resource[] = {
[0] = {
.start = S3C24XX_PA_ADC,
.end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
......@@ -175,113 +104,130 @@ static struct resource s3c_ts_resource[] = {
.end = IRQ_TC,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_ADC,
.end = IRQ_ADC,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device s3c_device_ts = {
.name = "s3c2410-ts",
struct platform_device s3c_device_adc = {
.name = "s3c24xx-adc",
.id = -1,
.dev.parent = &s3c_device_adc.dev,
.num_resources = ARRAY_SIZE(s3c_ts_resource),
.resource = s3c_ts_resource,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
};
EXPORT_SYMBOL(s3c_device_ts);
#endif /* CONFIG_PLAT_S3C24XX */
void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
{
s3c_set_platdata(hard_s3c2410ts_info,
sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
}
/* USB Device (Gadget)*/
/* Camif Controller */
static struct resource s3c_usbgadget_resource[] = {
#ifdef CONFIG_CPU_S3C2440
static struct resource s3c_camif_resource[] = {
[0] = {
.start = S3C24XX_PA_USBDEV,
.end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.start = S3C2440_PA_CAMIF,
.end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBD,
.end = IRQ_USBD,
.start = IRQ_CAM,
.end = IRQ_CAM,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device s3c_device_usbgadget = {
.name = "s3c2410-usbgadget",
struct platform_device s3c_device_camif = {
.name = "s3c2440-camif",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
.resource = s3c_usbgadget_resource,
.num_resources = ARRAY_SIZE(s3c_camif_resource),
.resource = s3c_camif_resource,
.dev = {
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
#endif /* CONFIG_CPU_S3C2440 */
EXPORT_SYMBOL(s3c_device_usbgadget);
void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
}
/* I2S */
/* USB High Speed 2.0 Device (Gadget) */
static struct resource s3c_hsudc_resource[] = {
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_iis_resource[] = {
[0] = {
.start = S3C2416_PA_HSUDC,
.end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
.start = S3C24XX_PA_IIS,
.end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBD,
.end = IRQ_USBD,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_hsudc_dmamask = DMA_BIT_MASK(32);
struct platform_device s3c_device_usb_hsudc = {
.name = "s3c-hsudc",
struct platform_device s3c_device_iis = {
.name = "s3c24xx-iis",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_hsudc_resource),
.resource = s3c_hsudc_resource,
.num_resources = ARRAY_SIZE(s3c_iis_resource),
.resource = s3c_iis_resource,
.dev = {
.dma_mask = &s3c_hsudc_dmamask,
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
}
};
#endif /* CONFIG_PLAT_S3C24XX */
void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
}
#ifdef CONFIG_CPU_S3C2440
struct platform_device s3c2412_device_iis = {
.name = "s3c2412-iis",
.id = -1,
.dev = {
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
#endif /* CONFIG_CPU_S3C2440 */
/* IIS */
/* LCD Controller */
static struct resource s3c_iis_resource[] = {
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_lcd_resource[] = {
[0] = {
.start = S3C24XX_PA_IIS,
.end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
.start = S3C24XX_PA_LCD,
.end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LCD,
.end = IRQ_LCD,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_iis_dmamask = 0xffffffffUL;
struct platform_device s3c_device_iis = {
.name = "s3c24xx-iis",
struct platform_device s3c_device_lcd = {
.name = "s3c2410-lcd",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_iis_resource),
.resource = s3c_iis_resource,
.num_resources = ARRAY_SIZE(s3c_lcd_resource),
.resource = s3c_lcd_resource,
.dev = {
.dma_mask = &s3c_device_iis_dmamask,
.coherent_dma_mask = 0xffffffffUL
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
EXPORT_SYMBOL(s3c_device_iis);
void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
{
struct s3c2410fb_mach_info *npd;
npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
if (npd) {
npd->displays = kmemdup(pd->displays,
sizeof(struct s3c2410fb_display) * npd->num_displays,
GFP_KERNEL);
if (!npd->displays)
printk(KERN_ERR "no memory for LCD display data\n");
} else {
printk(KERN_ERR "no memory for LCD platform data\n");
}
}
#endif /* CONFIG_PLAT_S3C24XX */
/* RTC */
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_rtc_resource[] = {
[0] = {
.start = S3C24XX_PA_RTC,
......@@ -306,39 +252,11 @@ struct platform_device s3c_device_rtc = {
.num_resources = ARRAY_SIZE(s3c_rtc_resource),
.resource = s3c_rtc_resource,
};
EXPORT_SYMBOL(s3c_device_rtc);
/* ADC */
static struct resource s3c_adc_resource[] = {
[0] = {
.start = S3C24XX_PA_ADC,
.end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_TC,
.end = IRQ_TC,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_ADC,
.end = IRQ_ADC,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device s3c_device_adc = {
.name = "s3c24xx-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
};
#endif /* CONFIG_PLAT_S3C24XX */
/* SDI */
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_sdi_resource[] = {
[0] = {
.start = S3C24XX_PA_SDI,
......@@ -350,7 +268,6 @@ static struct resource s3c_sdi_resource[] = {
.end = IRQ_SDI,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device s3c_device_sdi = {
......@@ -360,17 +277,16 @@ struct platform_device s3c_device_sdi = {
.resource = s3c_sdi_resource,
};
EXPORT_SYMBOL(s3c_device_sdi);
void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
{
s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
&s3c_device_sdi);
}
#endif /* CONFIG_PLAT_S3C24XX */
/* SPI */
/* SPI (0) */
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_spi0_resource[] = {
[0] = {
.start = S3C24XX_PA_SPI,
......@@ -382,26 +298,19 @@ static struct resource s3c_spi0_resource[] = {
.end = IRQ_SPI0,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
struct platform_device s3c_device_spi0 = {
.name = "s3c2410-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s3c_spi0_resource),
.resource = s3c_spi0_resource,
.dev = {
.dma_mask = &s3c_device_spi0_dmamask,
.coherent_dma_mask = 0xffffffffUL
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
EXPORT_SYMBOL(s3c_device_spi0);
/* SPI (1) */
static struct resource s3c_spi1_resource[] = {
[0] = {
.start = S3C24XX_PA_SPI + S3C2410_SPI1,
......@@ -413,116 +322,110 @@ static struct resource s3c_spi1_resource[] = {
.end = IRQ_SPI1,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
struct platform_device s3c_device_spi1 = {
.name = "s3c2410-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s3c_spi1_resource),
.resource = s3c_spi1_resource,
.dev = {
.dma_mask = &s3c_device_spi1_dmamask,
.coherent_dma_mask = 0xffffffffUL
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
#endif /* CONFIG_PLAT_S3C24XX */
EXPORT_SYMBOL(s3c_device_spi1);
#ifdef CONFIG_CPU_S3C2440
/* Camif Controller */
/* Touchscreen */
static struct resource s3c_camif_resource[] = {
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_ts_resource[] = {
[0] = {
.start = S3C2440_PA_CAMIF,
.end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
.start = S3C24XX_PA_ADC,
.end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_CAM,
.end = IRQ_CAM,
.start = IRQ_TC,
.end = IRQ_TC,
.flags = IORESOURCE_IRQ,
}
},
};
static u64 s3c_device_camif_dmamask = 0xffffffffUL;
struct platform_device s3c_device_camif = {
.name = "s3c2440-camif",
struct platform_device s3c_device_ts = {
.name = "s3c2410-ts",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_camif_resource),
.resource = s3c_camif_resource,
.dev = {
.dma_mask = &s3c_device_camif_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
.dev.parent = &s3c_device_adc.dev,
.num_resources = ARRAY_SIZE(s3c_ts_resource),
.resource = s3c_ts_resource,
};
EXPORT_SYMBOL(s3c_device_camif);
void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
{
s3c_set_platdata(hard_s3c2410ts_info,
sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
}
#endif /* CONFIG_PLAT_S3C24XX */
/* AC97 */
/* USB Device (Gadget) */
static struct resource s3c_ac97_resource[] = {
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_usbgadget_resource[] = {
[0] = {
.start = S3C2440_PA_AC97,
.end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
.start = S3C24XX_PA_USBDEV,
.end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3C244x_AC97,
.end = IRQ_S3C244x_AC97,
.start = IRQ_USBD,
.end = IRQ_USBD,
.flags = IORESOURCE_IRQ,
},
[2] = {
.name = "PCM out",
.start = DMACH_PCM_OUT,
.end = DMACH_PCM_OUT,
.flags = IORESOURCE_DMA,
},
[3] = {
.name = "PCM in",
.start = DMACH_PCM_IN,
.end = DMACH_PCM_IN,
.flags = IORESOURCE_DMA,
},
[4] = {
.name = "Mic in",
.start = DMACH_MIC_IN,
.end = DMACH_MIC_IN,
.flags = IORESOURCE_DMA,
},
}
};
static u64 s3c_device_audio_dmamask = 0xffffffffUL;
struct platform_device s3c_device_ac97 = {
.name = "samsung-ac97",
struct platform_device s3c_device_usbgadget = {
.name = "s3c2410-usbgadget",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_ac97_resource),
.resource = s3c_ac97_resource,
.dev = {
.dma_mask = &s3c_device_audio_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
.num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
.resource = s3c_usbgadget_resource,
};
EXPORT_SYMBOL(s3c_device_ac97);
void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
}
#endif /* CONFIG_PLAT_S3C24XX */
/* ASoC I2S */
/* USB High Spped 2.0 Device (Gadget) */
struct platform_device s3c2412_device_iis = {
.name = "s3c2412-iis",
.id = -1,
.dev = {
.dma_mask = &s3c_device_audio_dmamask,
.coherent_dma_mask = 0xffffffffUL
#ifdef CONFIG_PLAT_S3C24XX
static struct resource s3c_hsudc_resource[] = {
[0] = {
.start = S3C2416_PA_HSUDC,
.end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBD,
.end = IRQ_USBD,
.flags = IORESOURCE_IRQ,
}
};
EXPORT_SYMBOL(s3c2412_device_iis);
struct platform_device s3c_device_usb_hsudc = {
.name = "s3c-hsudc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_hsudc_resource),
.resource = s3c_hsudc_resource,
.dev = {
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
#endif // CONFIG_CPU_S32440
void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
}
#endif /* CONFIG_PLAT_S3C24XX */
/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
*
* Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
*
* Inspired by pxafb.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_FB_S3C2410_H
#define __ASM_PLAT_FB_S3C2410_H __FILE__
struct s3c2410fb_hw {
unsigned long lcdcon1;
unsigned long lcdcon2;
unsigned long lcdcon3;
unsigned long lcdcon4;
unsigned long lcdcon5;
};
/* LCD description */
struct s3c2410fb_display {
/* LCD type */
unsigned type;
/* Screen size */
unsigned short width;
unsigned short height;
/* Screen info */
unsigned short xres;
unsigned short yres;
unsigned short bpp;
unsigned pixclock; /* pixclock in picoseconds */
unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
/* lcd configuration registers */
unsigned long lcdcon5;
};
struct s3c2410fb_mach_info {
struct s3c2410fb_display *displays; /* attached diplays info */
unsigned num_displays; /* number of defined displays */
unsigned default_display;
/* GPIOs */
unsigned long gpcup;
unsigned long gpcup_mask;
unsigned long gpccon;
unsigned long gpccon_mask;
unsigned long gpdup;
unsigned long gpdup_mask;
unsigned long gpdcon;
unsigned long gpdcon_mask;
/* lpc3600 control register */
unsigned long lpcsel;
};
extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
#endif /* __ASM_PLAT_FB_S3C2410_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment