Commit 62c9072b authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next/fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (24 commits)
  ASoC: omap: McBSP: fix build breakage on OMAP1
  OMAP: hwmod: fix the i2c-reset timeout during bootup
  I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr
  I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision
  I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test
  I2C: OMAP2+:  Introduce I2C IP versioning constants
  I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32
  I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c
  OMAP4: hwmod data: Change DSS main_clk scheme
  OMAP4: powerdomain data: Remove unsupported MPU powerdomain state
  OMAP4: clock data: Keep GPMC clocks always enabled and hardware managed
  OMAP4: powerdomain data: Fix core mem states and missing cefuse flag
  OMAP2+: PM: Initialise sleep_switch to a non-valid value
  OMAP4: hwmod data: Modify DSS opt clocks
  OMAP4: iommu: fix clock name
  omap: iovmm: s/sg_dma_len(sg)/sg->length/
  omap: iommu: fix pte programming
  arm: omap3: cm-t35: fix slow path warning
  arm: omap3: cm-t35: minor comments fixes
  omap: ZOOM: QUART: Request reset GPIO
  ...
parents 4b30b6f2 c2fda222
/*
* board-cm-t35.c (CompuLab CM-T35 module)
*
* Copyright (C) 2009 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
* Copyright (C) 2009-2011 CompuLab, Ltd.
* Authors: Mike Rapoport <mike@compulab.co.il>
* Igor Grinberg <grinberg@compulab.co.il>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -13,11 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/kernel.h>
......@@ -149,12 +145,12 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
},
{
.name = "linux",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
.size = 32 * NAND_BLOCK_SIZE,
},
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
.offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
.size = MTDPART_SIZ_FULL,
},
};
......@@ -433,9 +429,9 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
gpio_export(wlan_rst, 0);
udelay(10);
gpio_set_value(wlan_rst, 0);
gpio_set_value_cansleep(wlan_rst, 0);
udelay(10);
gpio_set_value(wlan_rst, 1);
gpio_set_value_cansleep(wlan_rst, 1);
} else {
pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
}
......
......@@ -519,7 +519,6 @@ static void __init overo_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_ads7846_init();
overo_init_smsc911x();
overo_display_init();
overo_init_led();
......
......@@ -23,6 +23,7 @@
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
#define ZOOM_QUADUART_GPIO 102
#define ZOOM_QUADUART_RST_GPIO 152
#define QUART_CLK 1843200
#define DEBUG_BASE 0x08000000
#define ZOOM_ETHR_START DEBUG_BASE
......@@ -67,6 +68,14 @@ static inline void __init zoom_init_quaduart(void)
unsigned long cs_mem_base;
int quart_gpio = 0;
if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
GPIOF_OUT_INIT_LOW,
"TL16CP754C GPIO") < 0) {
pr_err("Failed to request GPIO%d for TL16CP754C\n",
ZOOM_QUADUART_RST_GPIO);
return;
}
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
......
......@@ -453,6 +453,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
if (IS_ERR_VALUE(r)) {
WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
mpurate_ck->name, mpurate, r);
clk_put(mpurate_ck);
return -EINVAL;
}
......
......@@ -1639,6 +1639,7 @@ static struct clk gpmc_ick = {
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
.flags = ENABLE_ON_INIT,
.clkdm_name = "l3_2_clkdm",
.parent = &l3_div_ck,
.recalc = &followparent_recalc,
......@@ -3068,10 +3069,10 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
CLK(NULL, "dmic_fck", &dmic_fck, CK_443X),
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X),
CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X),
CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X),
CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X),
CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X),
CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X),
CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X),
CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X),
CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
......
......@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
#include <plat/omap-pm.h>
......@@ -213,12 +214,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
if ((mmc_controller->slots[0].switch_pin > 0) && \
(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
if ((mmc_controller->slots[0].gpio_wp > 0) && \
(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
......
......@@ -21,9 +21,19 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
#include <plat/common.h>
#include <plat/omap_hwmod.h>
#include "mux.h"
/* In register I2C_CON, Bit 15 is the I2C enable bit */
#define I2C_EN BIT(15)
#define OMAP2_I2C_CON_OFFSET 0x24
#define OMAP4_I2C_CON_OFFSET 0xA4
/* Maximum microseconds to wait for OMAP module to softreset */
#define MAX_MODULE_SOFTRESET_WAIT 10000
void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
......@@ -37,3 +47,61 @@ void __init omap2_i2c_mux_pins(int bus_id)
sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
/**
* omap_i2c_reset - reset the omap i2c module.
* @oh: struct omap_hwmod *
*
* The i2c moudle in omap2, omap3 had a special sequence to reset. The
* sequence is:
* - Disable the I2C.
* - Write to SOFTRESET bit.
* - Enable the I2C.
* - Poll on the RESETDONE bit.
* The sequence is implemented in below function. This is called for 2420,
* 2430 and omap3.
*/
int omap_i2c_reset(struct omap_hwmod *oh)
{
u32 v;
u16 i2c_con;
int c = 0;
if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
i2c_con = OMAP4_I2C_CON_OFFSET;
} else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
i2c_con = OMAP2_I2C_CON_OFFSET;
} else {
WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
oh->name);
return -EINVAL;
}
/* Disable I2C */
v = omap_hwmod_read(oh, i2c_con);
v &= ~I2C_EN;
omap_hwmod_write(v, oh, i2c_con);
/* Write to the SOFTRESET bit */
omap_hwmod_softreset(oh);
/* Enable I2C */
v = omap_hwmod_read(oh, i2c_con);
v |= I2C_EN;
omap_hwmod_write(v, oh, i2c_con);
/* Poll on RESETDONE bit */
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
& SYSS_RESETDONE_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("%s: %s: softreset failed (waited %d usec)\n",
__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("%s: %s: softreset in %d usec\n", __func__,
oh->name, c);
return 0;
}
......@@ -225,8 +225,8 @@ static u32 omap2_get_pte_attr(struct iotlb_entry *e)
attr = e->mixed << 5;
attr |= e->endian;
attr |= e->elsz >> 3;
attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) ||
(e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6);
return attr;
}
......
......@@ -67,7 +67,7 @@ static struct iommu_device omap4_devices[] = {
.pdata = {
.name = "ducati",
.nr_tlb_entries = 32,
.clk_name = "ducati_ick",
.clk_name = "ipu_fck",
.da_start = 0x0,
.da_end = 0xFFFFF000,
},
......
......@@ -1655,6 +1655,33 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
__raw_writel(v, oh->_mpu_rt_va + reg_offs);
}
/**
* omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit
* @oh: struct omap_hwmod *
*
* This is a public function exposed to drivers. Some drivers may need to do
* some settings before and after resetting the device. Those drivers after
* doing the necessary settings could use this function to start a reset by
* setting the SYSCONFIG.SOFTRESET bit.
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
u32 v;
int ret;
if (!oh || !(oh->_sysc_cache))
return -EINVAL;
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}
/**
* omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
* @oh: struct omap_hwmod *
......
......@@ -1029,9 +1029,16 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
.rev = OMAP_I2C_IP_VERSION_1,
.reset = &omap_i2c_reset,
};
static struct omap_i2c_dev_attr i2c_dev_attr;
static struct omap_i2c_dev_attr i2c_dev_attr = {
.flags = OMAP_I2C_FLAG_NO_FIFO |
OMAP_I2C_FLAG_SIMPLE_CLOCK |
OMAP_I2C_FLAG_16BIT_DATA_REG |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
/* I2C1 */
......
......@@ -1078,10 +1078,15 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
.rev = OMAP_I2C_IP_VERSION_1,
.reset = &omap_i2c_reset,
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
.fifo_depth = 8, /* bytes */
.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
OMAP_I2C_FLAG_BUS_SHIFT_2 |
OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
};
/* I2C1 */
......@@ -1092,6 +1097,7 @@ static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
static struct omap_hwmod omap2430_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2chs1_fck",
......@@ -1127,6 +1133,7 @@ static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
static struct omap_hwmod omap2430_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2chs2_fck",
......
......@@ -1308,6 +1308,8 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
.rev = OMAP_I2C_IP_VERSION_1,
.reset = &omap_i2c_reset,
};
static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
......@@ -1607,6 +1609,9 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
......@@ -1615,6 +1620,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
......@@ -1638,6 +1644,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
......@@ -1646,6 +1655,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
......@@ -1669,6 +1679,9 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
static struct omap_i2c_dev_attr i2c3_dev_attr = {
.fifo_depth = 64, /* bytes */
.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
......@@ -1688,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = i2c3_mpu_irqs,
.sdma_reqs = i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
......
......@@ -22,11 +22,13 @@
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
#include <plat/i2c.h>
#include <plat/gpio.h>
#include <plat/dma.h>
#include <plat/mcspi.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/i2c.h>
#include "omap_hwmod_common_data.h"
......@@ -1136,7 +1138,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1175,7 +1177,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = {
static struct omap_hwmod omap44xx_dss_hwmod = {
.name = "dss_core",
.class = &omap44xx_dss_hwmod_class,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
......@@ -1238,7 +1240,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dispc_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_dispc_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1267,17 +1269,26 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
&omap44xx_l4_per__dss_dispc,
};
static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_dss_dispc_irqs,
.sdma_reqs = omap44xx_dss_dispc_sdma_reqs,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
.opt_clks = dss_dispc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
......@@ -1329,7 +1340,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi1_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_dsi1_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1358,17 +1369,23 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = {
&omap44xx_l4_per__dss_dsi1,
};
static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
};
static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap44xx_dsi_hwmod_class,
.mpu_irqs = omap44xx_dss_dsi1_irqs,
.sdma_reqs = omap44xx_dss_dsi1_sdma_reqs,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
.opt_clks = dss_dsi1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
......@@ -1399,7 +1416,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi2_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_dsi2_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1428,17 +1445,23 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = {
&omap44xx_l4_per__dss_dsi2,
};
static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
};
static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
.name = "dss_dsi2",
.class = &omap44xx_dsi_hwmod_class,
.mpu_irqs = omap44xx_dss_dsi2_irqs,
.sdma_reqs = omap44xx_dss_dsi2_sdma_reqs,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
.opt_clks = dss_dsi2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
......@@ -1489,7 +1512,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hdmi_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_hdmi_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1518,17 +1541,23 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = {
&omap44xx_l4_per__dss_hdmi,
};
static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
};
static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
.opt_clks = dss_hdmi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
......@@ -1574,7 +1603,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_rfbi_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_rfbi_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1603,16 +1632,22 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = {
&omap44xx_l4_per__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_fck" },
};
static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap44xx_rfbi_hwmod_class,
.sdma_reqs = omap44xx_dss_rfbi_sdma_reqs,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
......@@ -1642,7 +1677,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_venc_hwmod,
.clk = "l3_div_ck",
.clk = "dss_fck",
.addr = omap44xx_dss_venc_dma_addrs,
.user = OCP_USER_SDMA,
};
......@@ -1674,7 +1709,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = {
static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
.main_clk = "dss_fck",
.main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
......@@ -2127,6 +2162,12 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
.name = "i2c",
.sysc = &omap44xx_i2c_sysc,
.rev = OMAP_I2C_IP_VERSION_2,
.reset = &omap_i2c_reset,
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
};
/* i2c1 */
......@@ -2168,7 +2209,7 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
.class = &omap44xx_i2c_hwmod_class,
.flags = HWMOD_INIT_NO_RESET,
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c1_irqs,
.sdma_reqs = omap44xx_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
......@@ -2179,6 +2220,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
},
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
......@@ -2221,7 +2263,7 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
static struct omap_hwmod omap44xx_i2c2_hwmod = {
.name = "i2c2",
.class = &omap44xx_i2c_hwmod_class,
.flags = HWMOD_INIT_NO_RESET,
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c2_irqs,
.sdma_reqs = omap44xx_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
......@@ -2232,6 +2274,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
},
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
......@@ -2274,7 +2317,7 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
static struct omap_hwmod omap44xx_i2c3_hwmod = {
.name = "i2c3",
.class = &omap44xx_i2c_hwmod_class,
.flags = HWMOD_INIT_NO_RESET,
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c3_irqs,
.sdma_reqs = omap44xx_i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
......@@ -2285,6 +2328,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
},
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
......@@ -2327,7 +2371,7 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
static struct omap_hwmod omap44xx_i2c4_hwmod = {
.name = "i2c4",
.class = &omap44xx_i2c_hwmod_class,
.flags = HWMOD_INIT_NO_RESET,
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap44xx_i2c4_irqs,
.sdma_reqs = omap44xx_i2c4_sdma_reqs,
.main_clk = "i2c4_fck",
......@@ -2338,6 +2382,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
},
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
......
......@@ -106,7 +106,7 @@ static void omap2_init_processor_devices(void)
int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
{
u32 cur_state;
int sleep_switch = 0;
int sleep_switch = -1;
int ret = 0;
if (pwrdm == NULL || IS_ERR(pwrdm))
......
/*
* OMAP4 Power domains framework
*
* Copyright (C) 2009-2010 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Nokia Corporation
*
* Abhijit Pagare (abhijitpagare@ti.com)
......@@ -41,14 +41,14 @@ static struct powerdomain core_44xx_pwrdm = {
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF, /* core_nret_bank */
[1] = PWRSTS_OFF_RET, /* core_ocmram */
[1] = PWRSTS_RET, /* core_ocmram */
[2] = PWRSTS_RET, /* core_other_bank */
[3] = PWRSTS_OFF_RET, /* ducati_l2ram */
[4] = PWRSTS_OFF_RET, /* ducati_unicache */
},
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* core_nret_bank */
[1] = PWRSTS_OFF_RET, /* core_ocmram */
[1] = PWRSTS_ON, /* core_ocmram */
[2] = PWRSTS_ON, /* core_other_bank */
[3] = PWRSTS_ON, /* ducati_l2ram */
[4] = PWRSTS_ON, /* ducati_unicache */
......@@ -205,7 +205,7 @@ static struct powerdomain mpu_44xx_pwrdm = {
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
.pwrsts_mem_ret = {
......@@ -318,6 +318,7 @@ static struct powerdomain cefuse_44xx_pwrdm = {
.prcm_partition = OMAP4430_PRM_PARTITION,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/*
......
......@@ -209,8 +209,8 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
}
omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
/* Enable autoidle on OMAP2 / OMAP3 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
/* Enable autoidle on OMAP2+ */
if (cpu_class_is_omap2())
autoidle = 1;
/*
......
......@@ -22,6 +22,7 @@
#define __ASM__ARCH_OMAP_I2C_H
#include <linux/i2c.h>
#include <linux/i2c-omap.h>
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
......@@ -46,10 +47,13 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
*/
struct omap_i2c_dev_attr {
u8 fifo_depth;
u8 flags;
u32 flags;
};
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
struct omap_hwmod;
int omap_i2c_reset(struct omap_hwmod *oh);
#endif /* __ASM__ARCH_OMAP_I2C_H */
......@@ -566,6 +566,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
int omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
......
......@@ -72,7 +72,7 @@ static size_t sgtable_len(const struct sg_table *sgt)
for_each_sg(sgt->sgl, sg, sgt->nents, i) {
size_t bytes;
bytes = sg_dma_len(sg);
bytes = sg->length;
if (!iopgsz_ok(bytes)) {
pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
......@@ -198,7 +198,7 @@ static void *vmap_sg(const struct sg_table *sgt)
int err;
pa = sg_phys(sg);
bytes = sg_dma_len(sg);
bytes = sg->length;
BUG_ON(bytes != PAGE_SIZE);
......@@ -476,7 +476,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
struct iotlb_entry e;
pa = sg_phys(sg);
bytes = sg_dma_len(sg);
bytes = sg->length;
flags &= ~IOVMF_PGSZ_MASK;
pgsz = bytes_to_iopgsz(bytes);
......
......@@ -966,6 +966,33 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
}
EXPORT_SYMBOL(omap_mcbsp_stop);
/*
* The following functions are only required on an OMAP1-only build.
* mach-omap2/mcbsp.c contains the real functions
*/
#ifndef CONFIG_ARCH_OMAP2PLUS
int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
{
WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
__func__);
return -EINVAL;
}
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
__func__);
return;
}
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
__func__);
return;
}
#endif
#ifdef CONFIG_ARCH_OMAP3
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
......
......@@ -3,6 +3,33 @@
#include <linux/platform_device.h>
/*
* Version 2 of the I2C peripheral unit has a different register
* layout and extra registers. The ID register in the V2 peripheral
* unit on the OMAP4430 reports the same ID as the V1 peripheral
* unit on the OMAP3530, so we must inform the driver which IP
* version we know it is running on from platform / cpu-specific
* code using these constants in the hwmod class definition.
*/
#define OMAP_I2C_IP_VERSION_1 1
#define OMAP_I2C_IP_VERSION_2 2
/* struct omap_i2c_bus_platform_data .flags meanings */
#define OMAP_I2C_FLAG_NO_FIFO BIT(0)
#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1)
#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2)
#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE BIT(3)
#define OMAP_I2C_FLAG_APPLY_ERRATA_I207 BIT(4)
#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5)
#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6)
/* how the CPU address bus must be translated for I2C unit access */
#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0
#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7)
#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8)
#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7
struct omap_i2c_bus_platform_data {
u32 clkrate;
void (*set_mpu_wkup_lat)(struct device *dev, long set);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment