Merge bk://gkernel.bkbits.net/net-drivers-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/m68k/configs/atari_defconfig

@@ -430,7 +430,8 @@ CONFIG_EQUALIZER=m
 #
 # Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
 CONFIG_ATARILANCE=m
 
 #

arch/m68k/configs/hp300_defconfig

@@ -65,7 +65,7 @@ CONFIG_KMOD=y
 # CONFIG_APOLLO is not set
 # CONFIG_VME is not set
 CONFIG_HP300=y
-# CONFIG_DIO is not set
+CONFIG_DIO=y
 # CONFIG_SUN3X is not set
 # CONFIG_Q40 is not set
 
@@ -404,7 +404,7 @@ CONFIG_EQUALIZER=m
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_HPLANCE is not set
+CONFIG_HPLANCE=y
 
 #
 # Ethernet (1000 Mbit)

drivers/net/e100.c

@@ -2204,23 +2204,25 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		goto err_out_disable_pdev;
 	}
 
+	nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr));
+	if(!nic->csr) {
+		DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
+		err = -ENOMEM;
+		goto err_out_free_res;
+	}
+
+	e100_hw_reset(nic);
+
 	pci_set_master(pdev);
 
 	if((err = pci_set_dma_mask(pdev, 0xFFFFFFFFULL))) {
 		DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
-		goto err_out_free_res;
+		goto err_out_iounmap;
 	}
 
 	SET_MODULE_OWNER(netdev);
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
-	nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr));
-	if(!nic->csr) {
-		DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
-		err = -ENOMEM;
-		goto err_out_free_res;
-	}
-
 	if(ent->driver_data)
 		nic->flags |= ich;
 	else

drivers/net/hplance.c

@@ -76,25 +76,31 @@ static int __devinit hplance_init_one(struct dio_dev *d,
 				const struct dio_device_id *ent)
 {
 	struct net_device *dev;
-	int err;
+	int err = -ENOMEM;
 
 	dev = alloc_etherdev(sizeof(struct hplance_private));
 	if (!dev)
-		return -ENOMEM;
+		goto out;
 
-	if (!request_mem_region(d->resource.start, d->resource.end-d->resource.start, d->name))
-		return -EBUSY;
-
-	SET_MODULE_OWNER(dev);
+	err = -EBUSY;
+	if (!request_mem_region(dio_resource_start(d),
+				dio_resource_len(d), d->name))
+		goto out_free_netdev;
 
 	hplance_init(dev, d);
 	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
+	if (err)
+		goto out_release_mem_region;
+
 	dio_set_drvdata(d, dev);
 	return 0;
+
+ out_release_mem_region:
+	release_mem_region(dio_resource_start(d), dio_resource_len(d));
+ out_free_netdev:
+	free_netdev(dev);
+ out:
+	return err;
 }
 
 static void __devexit hplance_remove_one(struct dio_dev *d)
@@ -102,6 +108,7 @@ static void __devexit hplance_remove_one(struct dio_dev *d)
 	struct net_device *dev = dio_get_drvdata(d);
 
 	unregister_netdev(dev);
+	release_mem_region(dio_resource_start(d), dio_resource_len(d));
 	free_netdev(dev);
 }
 

drivers/net/ibmveth.c

@@ -598,7 +598,7 @@ static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *
 }
 
 static u32 netdev_get_link(struct net_device *dev) {
-	return 0;
+	return 1;
 }
 
 static struct ethtool_ops netdev_ethtool_ops = {

drivers/net/pcnet32.c

@@ -1010,7 +1010,11 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return -EBUSY;
     }
 
-    return pcnet32_probe1(ioaddr, 1, pdev);
+    err =  pcnet32_probe1(ioaddr, 1, pdev);
+    if (err < 0) {
+	pci_disable_device(pdev);
+    }
+    return err;
 }
 
 
@@ -2249,6 +2253,7 @@ static void __devexit pcnet32_remove_one(struct pci_dev *pdev)
 	release_region(dev->base_addr, PCNET32_TOTAL_SIZE);
 	pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
 	free_netdev(dev);
+	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
     }
 }

drivers/net/tulip/21142.c

@@ -14,9 +14,9 @@
 
 */
 
-#include "tulip.h"
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include "tulip.h"
 
 
 static u16 t21142_csr13[] = { 0x0001, 0x0009, 0x0009, 0x0000, 0x0001, };

drivers/net/tulip/eeprom.c

@@ -14,6 +14,7 @@
 
 */
 
+#include <linux/pci.h>
 #include "tulip.h"
 #include <linux/init.h>
 #include <asm/unaligned.h>

drivers/net/tulip/interrupt.c

@@ -14,10 +14,10 @@
 
 */
 
+#include <linux/pci.h>
 #include "tulip.h"
 #include <linux/config.h>
 #include <linux/etherdevice.h>
-#include <linux/pci.h>
 
 int tulip_rx_copybreak;
 unsigned int tulip_max_interrupt_work;

drivers/net/tulip/media.c

@@ -18,6 +18,7 @@
 #include <linux/mii.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/pci.h>
 #include "tulip.h"
 
 

drivers/net/tulip/pnic.c

@@ -15,6 +15,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/pci.h>
 #include "tulip.h"
 
 

drivers/net/tulip/pnic2.c

@@ -76,8 +76,8 @@
 
 
 
-#include "tulip.h"
 #include <linux/pci.h>
+#include "tulip.h"
 #include <linux/delay.h>
 
 

drivers/net/tulip/timer.c

@@ -14,6 +14,7 @@
 
 */
 
+#include <linux/pci.h>
 #include "tulip.h"
 
 

drivers/net/tulip/tulip.h

@@ -149,6 +149,9 @@ enum status_bits {
 	TxIntr = 0x01,
 };
 
+/* bit mask for CSR5 TX/RX process state */
+#define CSR5_TS	0x00700000
+#define CSR5_RS	0x000e0000
 
 enum tulip_mode_bits {
 	TxThreshold		= (1 << 22),
@@ -460,9 +463,19 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
 	u32 csr6 = ioread32(ioaddr + CSR6);
 
 	if (csr6 & RxTx) {
+		unsigned i=1300/10;
 		iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
 		barrier();
-		(void) ioread32(ioaddr + CSR6); /* mmio sync */
+		/* wait until in-flight frame completes.
+		 * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
+		 * Typically expect this loop to end in < 50 us on 100BT.
+		 */
+		while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
+			udelay(10);
+
+		if (!i)
+			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
+					tp->pdev->slot_name);
 	}
 }
 

drivers/net/tulip/tulip_core.c

@@ -26,8 +26,8 @@
 
 
 #include <linux/module.h>
-#include "tulip.h"
 #include <linux/pci.h>
+#include "tulip.h"
 #include <linux/init.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>