Commit 62e11d1b authored by Hauke Mehrtens's avatar Hauke Mehrtens Committed by Greg Kroah-Hartman

USB: Add driver for the bcma bus

This adds a USB driver using the generic platform device driver for the
USB controller found on the Broadcom bcma bus. The bcma bus just
exposes one device which serves the OHCI and the EHCI controller at the
same time. This driver probes for this USB controller and creates and
registers two new platform devices which will be probed by the new
generic platform device driver. This makes it possible to use the EHCI
and the OCHI controller on the bcma bus at the same time.
Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent e167d9fb
......@@ -638,3 +638,15 @@ config USB_OCTEON_OHCI
config USB_OCTEON2_COMMON
bool
default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
config USB_HCD_BCMA
tristate "BCMA usb host driver"
depends on BCMA && EXPERIMENTAL
select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
help
Enbale support for the EHCI and OCHI host controller on an bcma bus.
It converts the bcma driver into two platform device drivers
for ehci and ohci.
If unsure, say N.
......@@ -41,3 +41,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
/*
* Broadcom specific Advanced Microcontroller Bus
* Broadcom USB-core driver (BCMA bus glue)
*
* Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* Based on ssb-ohci driver
* Copyright 2007 Michael Buesch <m@bues.ch>
*
* Derived from the OHCI-PCI driver
* Copyright 1999 Roman Weissgaerber
* Copyright 2000-2002 David Brownell
* Copyright 1999 Linus Torvalds
* Copyright 1999 Gregory P. Smith
*
* Derived from the USBcore related parts of Broadcom-SB
* Copyright 2005-2011 Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
MODULE_AUTHOR("Hauke Mehrtens");
MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
MODULE_LICENSE("GPL");
struct bcma_hcd_device {
struct platform_device *ehci_dev;
struct platform_device *ohci_dev;
};
/* Wait for bitmask in a register to get set or cleared.
* timeout is in units of ten-microseconds.
*/
static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
int timeout)
{
int i;
u32 val;
for (i = 0; i < timeout; i++) {
val = bcma_read32(dev, reg);
if ((val & bitmask) == bitmask)
return 0;
udelay(10);
}
return -ETIMEDOUT;
}
static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
{
#ifdef CONFIG_BCMA_DRIVER_MIPS
/* Work around for 4716 failures. */
if (dev->bus->chipinfo.id == 0x4716) {
u32 tmp;
tmp = bcma_cpu_clock(&dev->bus->drv_mips);
if (tmp >= 480000000)
tmp = 0x1846b; /* set CDR to 0x11(fast) */
else if (tmp == 453000000)
tmp = 0x1046b; /* set CDR to 0x10(slow) */
else
tmp = 0;
/* Change Shim mdio control reg to fix host not acking at
* high frequencies
*/
if (tmp) {
bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
udelay(500);
bcma_write32(dev, 0x524, tmp);
udelay(500);
bcma_write32(dev, 0x524, 0x4ab);
udelay(500);
bcma_read32(dev, 0x528);
bcma_write32(dev, 0x528, 0x80000000);
}
}
#endif /* CONFIG_BCMA_DRIVER_MIPS */
}
/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
{
u32 tmp;
/*
* USB 2.0 special considerations:
*
* 1. Since the core supports both OHCI and EHCI functions, it must
* only be reset once.
*
* 2. In addition to the standard SI reset sequence, the Host Control
* Register must be programmed to bring the USB core and various
* phy components out of reset.
*/
if (!bcma_core_is_enabled(dev)) {
bcma_core_enable(dev, 0);
mdelay(10);
if (dev->id.rev >= 5) {
/* Enable Misc PLL */
tmp = bcma_read32(dev, 0x1e0);
tmp |= 0x100;
bcma_write32(dev, 0x1e0, tmp);
if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
printk(KERN_EMERG "Failed to enable misc PPL!\n");
/* Take out of resets */
bcma_write32(dev, 0x200, 0x4ff);
udelay(25);
bcma_write32(dev, 0x200, 0x6ff);
udelay(25);
/* Make sure digital and AFE are locked in USB PHY */
bcma_write32(dev, 0x524, 0x6b);
udelay(50);
tmp = bcma_read32(dev, 0x524);
udelay(50);
bcma_write32(dev, 0x524, 0xab);
udelay(50);
tmp = bcma_read32(dev, 0x524);
udelay(50);
bcma_write32(dev, 0x524, 0x2b);
udelay(50);
tmp = bcma_read32(dev, 0x524);
udelay(50);
bcma_write32(dev, 0x524, 0x10ab);
udelay(50);
tmp = bcma_read32(dev, 0x524);
if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
tmp = bcma_read32(dev, 0x528);
printk(KERN_EMERG
"USB20H mdio_rddata 0x%08x\n", tmp);
}
bcma_write32(dev, 0x528, 0x80000000);
tmp = bcma_read32(dev, 0x314);
udelay(265);
bcma_write32(dev, 0x200, 0x7ff);
udelay(10);
/* Take USB and HSIC out of non-driving modes */
bcma_write32(dev, 0x510, 0);
} else {
bcma_write32(dev, 0x200, 0x7ff);
udelay(1);
}
bcma_hcd_4716wa(dev);
}
}
static const struct usb_ehci_pdata ehci_pdata = {
};
static const struct usb_ohci_pdata ohci_pdata = {
};
static struct platform_device * __devinit
bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
{
struct platform_device *hci_dev;
struct resource hci_res[2];
int ret = -ENOMEM;
memset(hci_res, 0, sizeof(hci_res));
hci_res[0].start = addr;
hci_res[0].end = hci_res[0].start + 0x1000 - 1;
hci_res[0].flags = IORESOURCE_MEM;
hci_res[1].start = dev->irq;
hci_res[1].flags = IORESOURCE_IRQ;
hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
"ehci-platform" , 0);
if (!hci_dev)
return NULL;
hci_dev->dev.parent = &dev->dev;
hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
ret = platform_device_add_resources(hci_dev, hci_res,
ARRAY_SIZE(hci_res));
if (ret)
goto err_alloc;
if (ohci)
ret = platform_device_add_data(hci_dev, &ohci_pdata,
sizeof(ohci_pdata));
else
ret = platform_device_add_data(hci_dev, &ehci_pdata,
sizeof(ehci_pdata));
if (ret)
goto err_alloc;
ret = platform_device_add(hci_dev);
if (ret)
goto err_alloc;
return hci_dev;
err_alloc:
platform_device_put(hci_dev);
return ERR_PTR(ret);
}
static int __devinit bcma_hcd_probe(struct bcma_device *dev)
{
int err;
u16 chipid_top;
u32 ohci_addr;
struct bcma_hcd_device *usb_dev;
struct bcma_chipinfo *chipinfo;
chipinfo = &dev->bus->chipinfo;
/* USBcores are only connected on embedded devices. */
chipid_top = (chipinfo->id & 0xFF00);
if (chipid_top != 0x4700 && chipid_top != 0x5300)
return -ENODEV;
/* TODO: Probably need checks here; is the core connected? */
if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
return -EOPNOTSUPP;
usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
if (!usb_dev)
return -ENOMEM;
bcma_hcd_init_chip(dev);
/* In AI chips EHCI is addrspace 0, OHCI is 1 */
ohci_addr = dev->addr1;
if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
&& chipinfo->rev == 0)
ohci_addr = 0x18009000;
usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
if (IS_ERR(usb_dev->ohci_dev)) {
err = PTR_ERR(usb_dev->ohci_dev);
goto err_free_usb_dev;
}
usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
if (IS_ERR(usb_dev->ehci_dev)) {
err = PTR_ERR(usb_dev->ehci_dev);
goto err_unregister_ohci_dev;
}
bcma_set_drvdata(dev, usb_dev);
return 0;
err_unregister_ohci_dev:
platform_device_unregister(usb_dev->ohci_dev);
err_free_usb_dev:
kfree(usb_dev);
return err;
}
static void __devexit bcma_hcd_remove(struct bcma_device *dev)
{
struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
struct platform_device *ohci_dev = usb_dev->ohci_dev;
struct platform_device *ehci_dev = usb_dev->ehci_dev;
if (ohci_dev)
platform_device_unregister(ohci_dev);
if (ehci_dev)
platform_device_unregister(ehci_dev);
bcma_core_disable(dev, 0);
}
static void bcma_hcd_shutdown(struct bcma_device *dev)
{
bcma_core_disable(dev, 0);
}
#ifdef CONFIG_PM
static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
{
bcma_core_disable(dev, 0);
return 0;
}
static int bcma_hcd_resume(struct bcma_device *dev)
{
bcma_core_enable(dev, 0);
return 0;
}
#else /* !CONFIG_PM */
#define bcma_hcd_suspend NULL
#define bcma_hcd_resume NULL
#endif /* CONFIG_PM */
static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
BCMA_CORETABLE_END
};
MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
static struct bcma_driver bcma_hcd_driver = {
.name = KBUILD_MODNAME,
.id_table = bcma_hcd_table,
.probe = bcma_hcd_probe,
.remove = __devexit_p(bcma_hcd_remove),
.shutdown = bcma_hcd_shutdown,
.suspend = bcma_hcd_suspend,
.resume = bcma_hcd_resume,
};
static int __init bcma_hcd_init(void)
{
return bcma_driver_register(&bcma_hcd_driver);
}
module_init(bcma_hcd_init);
static void __exit bcma_hcd_exit(void)
{
bcma_driver_unregister(&bcma_hcd_driver);
}
module_exit(bcma_hcd_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment