Skip to content

L
linux
Commit 62e3d2b6 authored by Scott Feldman's avatar Scott Feldman Committed by Stephen Hemminger
Browse files
Options

[e1000] new 82541/5/6/7 hardware support 

* Added 82545 (rev3), 82546 (rev3), and 82541/7 (rev2) support
	- new device IDs
	- internal SERDES support for 82545/6 (rev3)
	- don't apply MMRBC workaround for 82545/6 (rev3)
	- don't use IO mapping for reset for 82545/6 (rev3)
parent 6cc43e74
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1177 additions and 557 deletions
drivers/net/e1000/e1000_ethtool.c
View file @ 62e3d2b6
......@@ -958,9 +958,13 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
case e1000_82544:
case e1000_82540:
case e1000_82545:
case e1000_82545_rev_3:
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82541:
case e1000_82541_rev_2:
case e1000_82547:
case e1000_82547_rev_2:
return e1000_integrated_phy_loopback(adapter);
break;
......@@ -983,9 +987,12 @@ e1000_setup_loopback_test(struct e1000_adapter *adapter)
{
uint32_t rctl;
if(adapter->hw.media_type == e1000_media_type_fiber) {
if(adapter->hw.media_type == e1000_media_type_fiber ||
adapter->hw.media_type == e1000_media_type_internal_serdes) {
if(adapter->hw.mac_type == e1000_82545 ||
adapter->hw.mac_type == e1000_82546)
adapter->hw.mac_type == e1000_82546 ||
adapter->hw.mac_type == e1000_82545_rev_3 ||
adapter->hw.mac_type == e1000_82546_rev_3)
return e1000_set_phy_loopback(adapter);
else {
rctl = E1000_READ_REG(&adapter->hw, RCTL);
......@@ -1010,9 +1017,12 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
if(adapter->hw.media_type == e1000_media_type_copper ||
(adapter->hw.media_type == e1000_media_type_fiber &&
((adapter->hw.media_type == e1000_media_type_fiber ||
adapter->hw.media_type == e1000_media_type_internal_serdes) &&
(adapter->hw.mac_type == e1000_82545 ||
adapter->hw.mac_type == e1000_82546))) {
adapter->hw.mac_type == e1000_82546 ||
adapter->hw.mac_type == e1000_82545_rev_3 ||
adapter->hw.mac_type == e1000_82546_rev_3))) {
adapter->hw.autoneg = TRUE;
e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
if(phy_reg & MII_CR_LOOPBACK) {
......@@ -1162,6 +1172,7 @@ e1000_ethtool_gwol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
return;
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
/* Wake events only supported on port A for dual fiber */
if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
wol->supported = 0;
......@@ -1200,6 +1211,7 @@ e1000_ethtool_swol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
return wol->wolopts ? -EOPNOTSUPP : 0;
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
/* Wake events only supported on port A for dual fiber */
if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
return wol->wolopts ? -EOPNOTSUPP : 0;
......
drivers/net/e1000/e1000_hw.c
View file @ 62e3d2b6
This diff is collapsed.
drivers/net/e1000/e1000_hw.h
View file @ 62e3d2b6
This diff is collapsed.
drivers/net/e1000/e1000_main.c
View file @ 62e3d2b6
......@@ -71,15 +71,28 @@ static struct pci_device_id e1000_pci_tbl[] = {
{0x8086, 0x100D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x100E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x100F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1015, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1016, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1017, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x101E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x101D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1018, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x101D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x101E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1026, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1027, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1075, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1076, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1077, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1078, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x1079, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x107A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0x8086, 0x107B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
/* required last entry */
{0,}
};
......@@ -426,6 +439,11 @@ e1000_probe(struct pci_dev *pdev,
if(pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
/* before reading the EEPROM, reset the controller to
* put the device in a known good starting state */
e1000_reset_hw(&adapter->hw);
/* make sure the EEPROM is good */
if(e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
......@@ -584,7 +602,10 @@ e1000_sw_init(struct e1000_adapter *adapter)
hw->fc_pause_time = E1000_FC_PAUSE_TIME;
hw->fc_send_xon = 1;
if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547))
if((hw->mac_type == e1000_82541) ||
(hw->mac_type == e1000_82547) ||
(hw->mac_type == e1000_82541_rev_2) ||
(hw->mac_type == e1000_82547_rev_2))
hw->phy_init_script = 1;
/* Media type - copper or fiber */
......@@ -763,7 +784,8 @@ e1000_configure_tx(struct e1000_adapter *adapter)
tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
break;
default:
if(adapter->hw.media_type == e1000_media_type_fiber)
if(adapter->hw.media_type == e1000_media_type_fiber ||
adapter->hw.media_type == e1000_media_type_internal_serdes)
tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
else
tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
......@@ -2387,7 +2409,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
uint16_t mii_reg;
uint16_t spddplx;
if(adapter->hw.media_type == e1000_media_type_fiber)
if(adapter->hw.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
switch (cmd) {
......@@ -2706,7 +2728,8 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state)
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
}
if(adapter->hw.media_type == e1000_media_type_fiber) {
if(adapter->hw.media_type == e1000_media_type_fiber ||
adapter->hw.media_type == e1000_media_type_internal_serdes) {
/* keep the laser running in D3 */
ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
......
drivers/net/e1000/e1000_param.c
View file @ 62e3d2b6
......@@ -458,6 +458,7 @@ e1000_check_options(struct e1000_adapter *adapter)
switch(adapter->hw.media_type) {
case e1000_media_type_fiber:
case e1000_media_type_internal_serdes:
e1000_check_fiber_options(adapter);
break;
case e1000_media_type_copper:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7