ARM: imx: move EHCI platform defines out of platform_data header

The platform_data header usb-ehci-mxc.h has a lot of stuff used by only
IMX platform code.  They shouldn't be really in this header but a IMX
platform local header.  Create ehci.h and move these stuff into it.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

arch/arm/mach-imx/ehci-imx25.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx27.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx31.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx35.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET	0x600

arch/arm/mach-imx/ehci-imx5.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define MXC_OTG_OFFSET			0

arch/arm/mach-imx/ehci.h

+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
+#define MXC_EHCI_FORCE_FS		(1 << 24)
+#define MXC_EHCI_UTMI_8BIT		(0 << 28)
+#define MXC_EHCI_UTMI_16BIT		(1 << 28)
+#define MXC_EHCI_SERIAL			(1 << 29)
+#define MXC_EHCI_MODE_UTMI		(0 << 30)
+#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
+#define MXC_EHCI_MODE_ULPI		(2 << 30)
+#define MXC_EHCI_MODE_SERIAL		(3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
+#define MXC_EHCI_INTERFACE_MASK		(0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
+#define MXC_EHCI_TTL_ENABLED		(1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
+#define MXC_EHCI_IPPUE_UP		(1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
+
+#define MXC_USBCTRL_OFFSET		0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
+#define MXC_USBH2CTRL_OFFSET		0x14
+
+#define MX5_USBOTHER_REGS_OFFSET	0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
+
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -50,6 +50,7 @@
 #include "common.h"
 #include "devices-imx31.h"
 #include "crmregs-imx3.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-cpuimx27.c

@@ -36,6 +36,7 @@
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx27.h"

arch/arm/mach-imx/mach-cpuimx35.c

@@ -39,6 +39,7 @@
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx35.h"

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -35,6 +35,7 @@
 
 #include "common.h"
 #include "devices-imx25.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx25.h"

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -43,6 +43,7 @@
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -39,6 +39,7 @@
 
 #include "common.h"
 #include "devices-imx25.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx25.h"
 #include "mx25.h"

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -40,6 +40,7 @@
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -40,6 +40,7 @@
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-mx31lilly.c

@@ -45,6 +45,7 @@
 #include "board-mx31lilly.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-mx31lite.c

@@ -42,6 +42,7 @@
 #include "board-mx31lite.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-mx31moboard.c

@@ -47,6 +47,7 @@
 #include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -50,6 +50,7 @@
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 

arch/arm/mach-imx/mach-pca100.c

@@ -36,6 +36,7 @@
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-pcm037.c

@@ -45,6 +45,7 @@
 
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "pcm037.h"

arch/arm/mach-imx/mach-pcm038.c

@@ -36,6 +36,7 @@
 #include "board-pcm038.h"
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-pcm043.c

@@ -35,6 +35,7 @@
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 #include "ulpi.h"

arch/arm/mach-imx/mach-vpr200.c

@@ -34,6 +34,7 @@
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 

arch/arm/mach-imx/mx31moboard-devboard.c

@@ -24,6 +24,7 @@
 
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mx31moboard-marxbot.c

@@ -28,6 +28,7 @@
 
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

arch/arm/mach-imx/mx31moboard-smartbot.c

@@ -28,6 +28,7 @@
 #include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"

include/linux/platform_data/usb-ehci-mxc.h

 #ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
 #define __INCLUDE_ASM_ARCH_MXC_EHCI_H
 
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
-#define MXC_EHCI_FORCE_FS		(1 << 24)
-#define MXC_EHCI_UTMI_8BIT		(0 << 28)
-#define MXC_EHCI_UTMI_16BIT		(1 << 28)
-#define MXC_EHCI_SERIAL			(1 << 29)
-#define MXC_EHCI_MODE_UTMI		(0 << 30)
-#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
-#define MXC_EHCI_MODE_ULPI		(2 << 30)
-#define MXC_EHCI_MODE_SERIAL		(3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
-#define MXC_EHCI_INTERFACE_MASK		(0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
-#define MXC_EHCI_TTL_ENABLED		(1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
-#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
-#define MXC_EHCI_IPPUE_UP		(1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
-
-#define MXC_USBCTRL_OFFSET		0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
-#define MXC_USBH2CTRL_OFFSET		0x14
-
-#define MX5_USBOTHER_REGS_OFFSET	0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
-
 struct mxc_usbh_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);
@@ -49,11 +9,5 @@ struct mxc_usbh_platform_data {
 	struct usb_phy		*otg;
 };
 
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */