Merge tag 'mmc-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull mmc fixes from Ulf Hansson:
 "MMC core:

   - Fix initialization for eMMC's HS200/HS400 mode

  MMC host:

   - sdhci-msm: Reset GCC_SDCC_BCR register to prevent timeout issues

   - sunxi-mmc: Fix DMA descriptors allocated above 32 bits"

* tag 'mmc-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC
  mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bits
  mmc: core: Set HS clock speed before sending HS CMD13

drivers/mmc/core/mmc.c

@@ -1384,13 +1384,17 @@ static int mmc_select_hs400es(struct mmc_card *card)
 		goto out_err;
 	}
 
+	/*
+	 * Bump to HS timing and frequency. Some cards don't handle
+	 * SEND_STATUS reliably at the initial frequency.
+	 */
 	mmc_set_timing(host, MMC_TIMING_MMC_HS);
+	mmc_set_bus_speed(card);
+
 	err = mmc_switch_status(card, true);
 	if (err)
 		goto out_err;
 
-	mmc_set_clock(host, card->ext_csd.hs_max_dtr);
-
 	/* Switch card to DDR with strobe bit */
 	val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE;
 	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
@@ -1448,7 +1452,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
 static int mmc_select_hs200(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
-	unsigned int old_timing, old_signal_voltage;
+	unsigned int old_timing, old_signal_voltage, old_clock;
 	int err = -EINVAL;
 	u8 val;
 
@@ -1479,8 +1483,17 @@ static int mmc_select_hs200(struct mmc_card *card)
 				   false, true, MMC_CMD_RETRIES);
 		if (err)
 			goto err;
+
+		/*
+		 * Bump to HS timing and frequency. Some cards don't handle
+		 * SEND_STATUS reliably at the initial frequency.
+		 * NB: We can't move to full (HS200) speeds until after we've
+		 * successfully switched over.
+		 */
 		old_timing = host->ios.timing;
+		old_clock = host->ios.clock;
 		mmc_set_timing(host, MMC_TIMING_MMC_HS200);
+		mmc_set_clock(card->host, card->ext_csd.hs_max_dtr);
 
 		/*
 		 * For HS200, CRC errors are not a reliable way to know the
@@ -1493,9 +1506,11 @@ static int mmc_select_hs200(struct mmc_card *card)
 		 * mmc_select_timing() assumes timing has not changed if
 		 * it is a switch error.
 		 */
-		if (err == -EBADMSG)
+		if (err == -EBADMSG) {
+			mmc_set_clock(host, old_clock);
 			mmc_set_timing(host, old_timing);
 		}
+	}
 err:
 	if (err) {
 		/* fall back to the old signal voltage, if fails report error */

drivers/mmc/host/sdhci-msm.c

@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/interconnect.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/reset.h>
 
 #include "sdhci-pltfm.h"
 #include "cqhci.h"
@@ -2482,6 +2483,43 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev,
 	of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config);
 }
 
+static int sdhci_msm_gcc_reset(struct device *dev, struct sdhci_host *host)
+{
+	struct reset_control *reset;
+	int ret = 0;
+
+	reset = reset_control_get_optional_exclusive(dev, NULL);
+	if (IS_ERR(reset))
+		return dev_err_probe(dev, PTR_ERR(reset),
+				"unable to acquire core_reset\n");
+
+	if (!reset)
+		return ret;
+
+	ret = reset_control_assert(reset);
+	if (ret) {
+		reset_control_put(reset);
+		return dev_err_probe(dev, ret, "core_reset assert failed\n");
+	}
+
+	/*
+	 * The hardware requirement for delay between assert/deassert
+	 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
+	 * ~125us (4/32768). To be on the safe side add 200us delay.
+	 */
+	usleep_range(200, 210);
+
+	ret = reset_control_deassert(reset);
+	if (ret) {
+		reset_control_put(reset);
+		return dev_err_probe(dev, ret, "core_reset deassert failed\n");
+	}
+
+	usleep_range(200, 210);
+	reset_control_put(reset);
+
+	return ret;
+}
 
 static int sdhci_msm_probe(struct platform_device *pdev)
 {
@@ -2529,6 +2567,10 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 
 	msm_host->saved_tuning_phase = INVALID_TUNING_PHASE;
 
+	ret = sdhci_msm_gcc_reset(&pdev->dev, host);
+	if (ret)
+		goto pltfm_free;
+
 	/* Setup SDCC bus voter clock. */
 	msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
 	if (!IS_ERR(msm_host->bus_clk)) {

drivers/mmc/host/sunxi-mmc.c

@@ -377,7 +377,8 @@ static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
 		pdes[i].buf_addr_ptr1 =
 			cpu_to_le32(sg_dma_address(&data->sg[i]) >>
 				    host->cfg->idma_des_shift);
-		pdes[i].buf_addr_ptr2 = cpu_to_le32((u32)next_desc >>
+		pdes[i].buf_addr_ptr2 =
+			cpu_to_le32(next_desc >>
 				    host->cfg->idma_des_shift);
 	}