Commit 64972acd authored by Greg Ungerer's avatar Greg Ungerer Committed by Shawn Guo

ARM: dts: imx: add IMX50 SoC device tree

Create device tree source for the Freescale IMX50 SoC. This was based on
the IMX53 source with changes made as necessary.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 5c7135cd
/*
* Copyright 2013 Greg Ungerer <gerg@uclinux.org>
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "skeleton.dtsi"
#include "imx50-pinfunc.h"
/ {
aliases {
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
};
};
tzic: tz-interrupt-controller@0fffc000 {
compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x0fffc000 0x4000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x10000000>;
ranges;
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
esdhc1: esdhc@50004000 {
compatible = "fsl,imx50-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc2: esdhc@50008000 {
compatible = "fsl,imx50-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
uart3: serial@5000c000 {
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks 32>, <&clks 33>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks 51>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi2: ssi@50014000 {
compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
esdhc3: esdhc@50020000 {
compatible = "fsl,imx50-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc4: esdhc@50024000 {
compatible = "fsl,imx50-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
};
usbotg: usb@53f80000 {
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
clocks = <&clks 124>;
status = "disabled";
};
usbh1: usb@53f80200 {
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
clocks = <&clks 125>;
status = "disabled";
};
usbh2: usb@53f80400 {
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
clocks = <&clks 108>;
status = "disabled";
};
usbh3: usb@53f80600 {
compatible = "fsl,imx50-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
clocks = <&clks 108>;
status = "disabled";
};
gpio1: gpio@53f84000 {
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
wdog1: wdog@53f98000 {
compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
gpt: timer@53fa0000 {
compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks 36>, <&clks 41>;
clock-names = "ipg", "per";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
};
gpr: iomuxc-gpr@53fa8000 {
compatible = "fsl,imx50-iomuxc-gpr", "syscon";
reg = <0x53fa8000 0xc>;
};
pwm1: pwm@53fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks 37>, <&clks 38>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@53fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks 39>, <&clks 40>;
clock-names = "ipg", "per";
interrupts = <94>;
};
uart1: serial@53fbc000 {
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks 28>, <&clks 29>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@53fc0000 {
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks 30>, <&clks 31>;
clock-names = "ipg", "per";
status = "disabled";
};
src: src@53fd0000 {
compatible = "fsl,imx50-src", "fsl,imx51-src";
reg = <0x53fd0000 0x4000>;
#reset-cells = <1>;
};
clks: ccm@53fd4000{
compatible = "fsl,imx50-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
gpio5: gpio@53fdc000 {
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c3: i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
clocks = <&clks 88>;
status = "disabled";
};
uart4: serial@53ff0000 {
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks 65>, <&clks 66>;
clock-names = "ipg", "per";
status = "disabled";
};
};
aips@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000000 0x10000000>;
ranges;
uart5: serial@63f90000 {
compatible = "fsl,imx50-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks 67>, <&clks 68>;
clock-names = "ipg", "per";
status = "disabled";
};
owire: owire@63fa4000 {
compatible = "fsl,imx50-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
clocks = <&clks 159>;
status = "disabled";
};
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks 53>, <&clks 54>;
clock-names = "ipg", "per";
status = "disabled";
};
sdma: sdma@63fb0000 {
compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
cspi: cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
clocks = <&clks 35>;
status = "disabled";
};
i2c1: i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
clocks = <&clks 34>;
status = "disabled";
};
ssi1: ssi@63fcc000 {
compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
audmux: audmux@63fd0000 {
compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
fec: ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment