selftests: netfilter: add bridge conntrack + multicast test case

Add test case for multicast packet confirm race.
Without preceding patch, this should result in:

 WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
 Workqueue: events_unbound macvlan_process_broadcast
 RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
  ? __nf_conntrack_confirm+0x3ed/0x5f0
  nf_confirm+0x2ad/0x2d0
  nf_hook_slow+0x36/0xd0
  ip_local_deliver+0xce/0x110
  __netif_receive_skb_one_core+0x4f/0x70
  process_backlog+0x8c/0x130
  [..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

tools/testing/selftests/netfilter/Makefile

@@ -7,7 +7,8 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
 	nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
 	ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \
 	conntrack_vrf.sh nft_synproxy.sh rpath.sh nft_audit.sh \
-	conntrack_sctp_collision.sh xt_string.sh
+	conntrack_sctp_collision.sh xt_string.sh \
+	bridge_netfilter.sh
 
 HOSTPKG_CONFIG := pkg-config
 

tools/testing/selftests/netfilter/bridge_netfilter.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bridge netfilter + conntrack, a combination that doesn't really work,
+# with multicast/broadcast packets racing for hash table insertion.
+
+#           eth0    br0     eth0
+# setup is: ns1 <->,ns0 <-> ns3
+#           ns2 <-'    `'-> ns4
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+ns3="ns3-$sfx"
+ns4="ns4-$sfx"
+
+ebtables -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ebtables"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+for i in $(seq 0 4); do
+  eval ip netns add \$ns$i
+done
+
+cleanup() {
+  for i in $(seq 0 4); do eval ip netns del \$ns$i;done
+}
+
+trap cleanup EXIT
+
+do_ping()
+{
+	fromns="$1"
+	dstip="$2"
+
+	ip netns exec $fromns ping -c 1 -q $dstip > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "ERROR: ping from $fromns to $dstip"
+		ip netns exec ${ns0} nft list ruleset
+		ret=1
+	fi
+}
+
+bcast_ping()
+{
+	fromns="$1"
+	dstip="$2"
+
+	for i in $(seq 1 1000); do
+		ip netns exec $fromns ping -q -f -b -c 1 -q $dstip > /dev/null 2>&1
+		if [ $? -ne 0 ]; then
+			echo "ERROR: ping -b from $fromns to $dstip"
+			ip netns exec ${ns0} nft list ruleset
+			fi
+	done
+}
+
+ip link add veth1 netns ${ns0} type veth peer name eth0 netns ${ns1}
+if [ $? -ne 0 ]; then
+	echo "SKIP: Can't create veth device"
+	exit $ksft_skip
+fi
+
+ip link add veth2 netns ${ns0} type veth peer name eth0 netns $ns2
+ip link add veth3 netns ${ns0} type veth peer name eth0 netns $ns3
+ip link add veth4 netns ${ns0} type veth peer name eth0 netns $ns4
+
+ip -net ${ns0} link set lo up
+
+for i in $(seq 1 4); do
+  ip -net ${ns0} link set veth$i up
+done
+
+ip -net ${ns0} link add br0 type bridge stp_state 0 forward_delay 0 nf_call_iptables 1 nf_call_ip6tables 1 nf_call_arptables 1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Can't create bridge br0"
+	exit $ksft_skip
+fi
+
+# make veth0,1,2 part of bridge.
+for i in $(seq 1 3); do
+  ip -net ${ns0} link set veth$i master br0
+done
+
+# add a macvlan on top of the bridge.
+MACVLAN_ADDR=ba:f3:13:37:42:23
+ip -net ${ns0} link add link br0 name macvlan0 type macvlan mode private
+ip -net ${ns0} link set macvlan0 address ${MACVLAN_ADDR}
+ip -net ${ns0} link set macvlan0 up
+ip -net ${ns0} addr add 10.23.0.1/24 dev macvlan0
+
+# add a macvlan on top of veth4.
+MACVLAN_ADDR=ba:f3:13:37:42:24
+ip -net ${ns0} link add link veth4 name macvlan4 type macvlan mode vepa
+ip -net ${ns0} link set macvlan4 address ${MACVLAN_ADDR}
+ip -net ${ns0} link set macvlan4 up
+
+# make the macvlan part of the bridge.
+# veth4 is not a bridge port, only the macvlan on top of it.
+ip -net ${ns0} link set macvlan4 master br0
+
+ip -net ${ns0} link set br0 up
+ip -net ${ns0} addr add 10.0.0.1/24 dev br0
+ip netns exec ${ns0} sysctl -q net.bridge.bridge-nf-call-iptables=1
+ret=$?
+if [ $ret -ne 0 ] ; then
+	echo "SKIP: bridge netfilter not available"
+	ret=$ksft_skip
+fi
+
+# for testing, so namespaces will reply to ping -b probes.
+ip netns exec ${ns0} sysctl -q net.ipv4.icmp_echo_ignore_broadcasts=0
+
+# enable conntrack in ns0 and drop broadcast packets in forward to
+# avoid them from getting confirmed in the postrouting hook before
+# the cloned skb is passed up the stack.
+ip netns exec ${ns0} nft -f - <<EOF
+table ip filter {
+	chain input {
+		type filter hook input priority 1; policy accept
+		iifname br0 counter
+		ct state new accept
+	}
+}
+
+table bridge filter {
+	chain forward {
+		type filter hook forward priority 0; policy accept
+		meta pkttype broadcast ip protocol icmp counter drop
+	}
+}
+EOF
+
+# place 1, 2 & 3 in same subnet, connected via ns0:br0.
+# ns4 is placed in same subnet as well, but its not
+# part of the bridge: the corresponding veth4 is not
+# part of the bridge, only its macvlan interface.
+for i in $(seq 1 4); do
+  eval ip -net \$ns$i link set lo up
+  eval ip -net \$ns$i link set eth0 up
+done
+for i in $(seq 1 2); do
+  eval ip -net \$ns$i addr add 10.0.0.1$i/24 dev eth0
+done
+
+ip -net ${ns3} addr add 10.23.0.13/24 dev eth0
+ip -net ${ns4} addr add 10.23.0.14/24 dev eth0
+
+# test basic connectivity
+do_ping ${ns1} 10.0.0.12
+do_ping ${ns3} 10.23.0.1
+do_ping ${ns4} 10.23.0.1
+
+if [ $ret -eq 0 ];then
+	echo "PASS: netns connectivity: ns1 can reach ns2, ns3 and ns4 can reach ns0"
+fi
+
+bcast_ping ${ns1} 10.0.0.255
+
+# This should deliver broadcast to macvlan0, which is on top of ns0:br0.
+bcast_ping ${ns3} 10.23.0.255
+
+# same, this time via veth4:macvlan4.
+bcast_ping ${ns4} 10.23.0.255
+
+read t < /proc/sys/kernel/tainted
+
+if [ $t -eq 0 ];then
+	echo PASS: kernel not tainted
+else
+	echo ERROR: kernel is tainted
+	ret=1
+fi
+
+exit $ret