Commit 65753f38 authored by Dmitry Baryshkov's avatar Dmitry Baryshkov Committed by Vinod Koul

phy: qcom-qmp-usb: drop multi-PHY support

Each USB QMP PHY device provides just a single UFS PHY. Drop support
for handling multiple child PHYs. Use phy->init_count to check if the
PHY was initialized rather than duplicating this count.
Acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-27-dmitry.baryshkov@linaro.orgSigned-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent 1da7115e
......@@ -1440,8 +1440,6 @@ struct qmp_phy {
* @vregs: regulator supplies bulk data
*
* @phys: array of per-lane phy descriptors
* @phy_mutex: mutex lock for PHY common block initialization
* @init_count: phy common block initialization count
*/
struct qcom_qmp {
struct device *dev;
......@@ -1452,9 +1450,6 @@ struct qcom_qmp {
struct regulator_bulk_data *vregs;
struct qmp_phy **phys;
struct mutex phy_mutex;
int init_count;
};
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
......@@ -2016,17 +2011,11 @@ static int qcom_qmp_phy_usb_com_init(struct qmp_phy *qphy)
void __iomem *dp_com = qmp->dp_com;
int ret, i;
mutex_lock(&qmp->phy_mutex);
if (qmp->init_count++) {
mutex_unlock(&qmp->phy_mutex);
return 0;
}
/* turn on regulator supplies */
ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
if (ret) {
dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
goto err_unlock;
return ret;
}
for (i = 0; i < cfg->num_resets; i++) {
......@@ -2082,8 +2071,6 @@ static int qcom_qmp_phy_usb_com_init(struct qmp_phy *qphy)
qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL,
cfg->pwrdn_ctrl);
mutex_unlock(&qmp->phy_mutex);
return 0;
err_assert_reset:
......@@ -2091,8 +2078,6 @@ static int qcom_qmp_phy_usb_com_init(struct qmp_phy *qphy)
reset_control_assert(qmp->resets[i]);
err_disable_regulators:
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
err_unlock:
mutex_unlock(&qmp->phy_mutex);
return ret;
}
......@@ -2103,12 +2088,6 @@ static int qcom_qmp_phy_usb_com_exit(struct qmp_phy *qphy)
const struct qmp_phy_cfg *cfg = qphy->cfg;
int i = cfg->num_resets;
mutex_lock(&qmp->phy_mutex);
if (--qmp->init_count) {
mutex_unlock(&qmp->phy_mutex);
return 0;
}
while (--i >= 0)
reset_control_assert(qmp->resets[i]);
......@@ -2116,8 +2095,6 @@ static int qcom_qmp_phy_usb_com_exit(struct qmp_phy *qphy)
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
mutex_unlock(&qmp->phy_mutex);
return 0;
}
......@@ -2332,7 +2309,7 @@ static int __maybe_unused qcom_qmp_phy_usb_runtime_suspend(struct device *dev)
if (cfg->type != PHY_TYPE_USB3)
return 0;
if (!qmp->init_count) {
if (!qphy->phy->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
}
......@@ -2358,7 +2335,7 @@ static int __maybe_unused qcom_qmp_phy_usb_runtime_resume(struct device *dev)
if (cfg->type != PHY_TYPE_USB3)
return 0;
if (!qmp->init_count) {
if (!qphy->phy->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
}
......@@ -2673,7 +2650,7 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev)
struct phy_provider *phy_provider;
void __iomem *serdes;
const struct qmp_phy_cfg *cfg = NULL;
int num, id, expected_phys;
int num, id;
int ret;
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
......@@ -2700,10 +2677,6 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev)
return PTR_ERR(qmp->dp_com);
}
expected_phys = cfg->nlanes;
mutex_init(&qmp->phy_mutex);
ret = qcom_qmp_phy_usb_clk_init(dev, cfg);
if (ret)
return ret;
......@@ -2722,7 +2695,7 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev)
num = of_get_available_child_count(dev->of_node);
/* do we have a rogue child node ? */
if (num > expected_phys)
if (num > 1)
return -EINVAL;
qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment