Commit 65bc2fe8 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by Mauro Carvalho Chehab

[media] cx88: convert it to use pr_foo() macros

Instead of calling printk() directly, use pr_foo()
macros, as suggested at the Kernel's coding style.

Please notice that a conversion to dev_foo() is not trivial,
as several parts on this driver uses pr_cont().
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 3b0cb24f
......@@ -24,6 +24,9 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include "cx88-reg.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
......@@ -42,18 +45,11 @@
#include <sound/tlv.h>
#include <media/i2c/wm8775.h>
#include "cx88.h"
#include "cx88-reg.h"
#define dprintk(level, fmt, arg...) do { \
if (debug + 1 > level) \
printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg);\
} while(0)
#define dprintk_core(level, fmt, arg...) do { \
if (debug + 1 > level) \
printk(KERN_DEBUG "%s/1: " fmt, chip->core->name , ## arg);\
} while(0)
printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt), \
chip->core->name, ##arg); \
} while (0)
/****************************************************************************
Data type declarations - Can be moded to a header file later
......@@ -230,12 +226,12 @@ static void cx8801_aud_irq(snd_cx88_card_t *chip)
return;
cx_write(MO_AUD_INTSTAT, status);
if (debug > 1 || (status & mask & ~0xff))
cx88_print_irqbits(core->name, "irq aud",
cx88_print_irqbits("irq aud",
cx88_aud_irqs, ARRAY_SIZE(cx88_aud_irqs),
status, mask);
/* risc op code error */
if (status & AUD_INT_OPC_ERR) {
printk(KERN_WARNING "%s/1: Audio risc op code error\n",core->name);
pr_warn("Audio risc op code error\n");
cx_clear(MO_AUD_DMACNTRL, 0x11);
cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH25]);
}
......@@ -279,9 +275,7 @@ static irqreturn_t cx8801_irq(int irq, void *dev_id)
}
if (MAX_IRQ_LOOP == loop) {
printk(KERN_ERR
"%s/1: IRQ loop detected, disabling interrupts\n",
core->name);
pr_err("IRQ loop detected, disabling interrupts\n");
cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT);
}
......@@ -423,7 +417,7 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
int err;
if (!chip) {
printk(KERN_ERR "BUG: cx88 can't find device struct. Can't proceed with open\n");
pr_err("BUG: cx88 can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
......
......@@ -26,6 +26,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -38,8 +40,6 @@
#include <media/v4l2-event.h>
#include <media/drv-intf/cx2341x.h>
#include "cx88.h"
MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards");
MODULE_AUTHOR("Jelle Foks <jelle@foks.us>, Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
......@@ -51,8 +51,9 @@ MODULE_PARM_DESC(debug,"enable debug messages [blackbird]");
#define dprintk(level, fmt, arg...) do { \
if (debug + 1 > level) \
printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg); \
} while(0)
printk(KERN_DEBUG pr_fmt("%s: blackbird:" fmt), \
__func__, ##arg); \
} while (0)
/* ------------------------------------------------------------------ */
......@@ -1118,12 +1119,11 @@ static int blackbird_register_video(struct cx8802_dev *dev)
dev->mpeg_dev.queue = &dev->vb2_mpegq;
err = video_register_device(&dev->mpeg_dev, VFL_TYPE_GRABBER, -1);
if (err < 0) {
printk(KERN_INFO "%s/2: can't register mpeg device\n",
dev->core->name);
pr_info("can't register mpeg device\n");
return err;
}
printk(KERN_INFO "%s/2: registered device %s [mpeg]\n",
dev->core->name, video_device_node_name(&dev->mpeg_dev));
pr_info("registered device %s [mpeg]\n",
video_device_node_name(&dev->mpeg_dev));
return 0;
}
......@@ -1158,8 +1158,7 @@ static int cx8802_blackbird_probe(struct cx8802_driver *drv)
v4l2_ctrl_add_handler(&dev->cxhdl.hdl, &core->video_hdl, NULL);
/* blackbird stuff */
printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n",
core->name);
pr_info("cx23416 based mpeg encoder (blackbird reference design)\n");
host_setup(dev->core);
blackbird_initialize_codec(dev);
......@@ -1219,7 +1218,7 @@ static struct cx8802_driver cx8802_blackbird_driver = {
static int __init blackbird_init(void)
{
printk(KERN_INFO "cx2388x blackbird driver version %s loaded\n",
pr_info("cx2388x blackbird driver version %s loaded\n",
CX88_VERSION);
return cx8802_register_driver(&cx8802_blackbird_driver);
}
......
......@@ -20,16 +20,16 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include "tea5767.h"
#include "xc4000.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include "cx88.h"
#include "tea5767.h"
#include "xc4000.h"
static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
static unsigned int card[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
......@@ -50,19 +50,11 @@ static int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "Disable IR support");
#define info_printk(core, fmt, arg...) \
printk(KERN_INFO "%s: " fmt, core->name , ## arg)
#define warn_printk(core, fmt, arg...) \
printk(KERN_WARNING "%s: " fmt, core->name , ## arg)
#define err_printk(core, fmt, arg...) \
printk(KERN_ERR "%s: " fmt, core->name , ## arg)
#define dprintk(level,fmt, arg...) do { \
if (cx88_core_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, core->name , ## arg); \
} while(0)
printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \
__func__, ##arg); \
} while (0)
/* ------------------------------------------------------------------ */
......@@ -2829,7 +2821,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
if (eeprom_data[4] != 0x7d ||
eeprom_data[5] != 0x10 ||
eeprom_data[7] != 0x66) {
warn_printk(core, "Leadtek eeprom invalid.\n");
pr_warn("Leadtek eeprom invalid.\n");
return;
}
......@@ -2847,7 +2839,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
break;
}
info_printk(core, "Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
pr_info("Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
core->board.tuner_type, eeprom_data[0]);
}
......@@ -2904,12 +2896,11 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
cx_set(MO_GP0_IO, 0x008989FF);
break;
default:
warn_printk(core, "warning: unknown hauppauge model #%d\n",
tv.model);
pr_warn("warning: unknown hauppauge model #%d\n", tv.model);
break;
}
info_printk(core, "hauppauge eeprom: model=%d\n", tv.model);
pr_info("hauppauge eeprom: model=%d\n", tv.model);
}
/* ----------------------------------------------------------------------- */
......@@ -2955,7 +2946,7 @@ static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data)
const char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner))
? gdi_tuner[eeprom_data[0x0d]].name : NULL;
info_printk(core, "GDI: tuner=%s\n", name ? name : "unknown");
pr_info("GDI: tuner=%s\n", name ? name : "unknown");
if (NULL == name)
return;
core->board.tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
......@@ -3106,7 +3097,7 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
msg.len = (i != 12 ? 5 : 2);
err = i2c_transfer(&core->i2c_adap, &msg, 1);
if (err != 1) {
warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",
pr_warn("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",
i, err);
return;
}
......@@ -3229,14 +3220,14 @@ int cx88_tuner_callback(void *priv, int component, int command, int arg)
struct cx88_core *core;
if (!i2c_algo) {
printk(KERN_ERR "cx88: Error - i2c private data undefined.\n");
pr_err("Error - i2c private data undefined.\n");
return -EINVAL;
}
core = i2c_algo->data;
if (!core) {
printk(KERN_ERR "cx88: Error - device struct undefined.\n");
pr_err("Error - device struct undefined.\n");
return -EINVAL;
}
......@@ -3254,7 +3245,7 @@ int cx88_tuner_callback(void *priv, int component, int command, int arg)
dprintk(1, "Calling XC5000 callback\n");
return cx88_xc5000_tuner_callback(core, command, arg);
}
err_printk(core, "Error: Calling callback for tuner %d\n",
pr_err("Error: Calling callback for tuner %d\n",
core->board.tuner_type);
return -EINVAL;
}
......@@ -3268,25 +3259,19 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
if (0 == pci->subsystem_vendor &&
0 == pci->subsystem_device) {
printk(KERN_ERR
"%s: Your board has no valid PCI Subsystem ID and thus can't\n"
"%s: be autodetected. Please pass card=<n> insmod option to\n"
"%s: workaround that. Redirect complaints to the vendor of\n"
"%s: the TV card. Best regards,\n"
"%s: -- tux\n",
core->name,core->name,core->name,core->name,core->name);
pr_err("Your board has no valid PCI Subsystem ID and thus can't\n");
pr_err("be autodetected. Please pass card=<n> insmod option to\n");
pr_err("workaround that. Redirect complaints to the vendor of\n");
pr_err("the TV card\n");
} else {
printk(KERN_ERR
"%s: Your board isn't known (yet) to the driver. You can\n"
"%s: try to pick one of the existing card configs via\n"
"%s: card=<n> insmod option. Updating to the latest\n"
"%s: version might help as well.\n",
core->name,core->name,core->name,core->name);
pr_err("Your board isn't known (yet) to the driver. You can\n");
pr_err("try to pick one of the existing card configs via\n");
pr_err("card=<n> insmod option. Updating to the latest\n");
pr_err("version might help as well.\n");
}
err_printk(core, "Here is a list of valid choices for the card=<n> insmod option:\n");
pr_err("Here is a list of valid choices for the card=<n> insmod option:\n");
for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
printk(KERN_ERR "%s: card=%d -> %s\n",
core->name, i, cx88_boards[i].name);
pr_err(" card=%d -> %s\n", i, cx88_boards[i].name);
}
static void cx88_card_setup_pre_i2c(struct cx88_core *core)
......@@ -3508,7 +3493,7 @@ static void cx88_card_setup(struct cx88_core *core)
for (i = 0; i < ARRAY_SIZE(buffer); i++)
if (2 != i2c_master_send(&core->i2c_client,
buffer[i],2))
warn_printk(core, "Unable to enable tuner(%i).\n",
pr_warn("Unable to enable tuner(%i).\n",
i);
}
break;
......@@ -3608,29 +3593,24 @@ static int cx88_pci_quirks(const char *name, struct pci_dev *pci)
/* check pci quirks */
if (pci_pci_problems & PCIPCI_TRITON) {
printk(KERN_INFO "%s: quirk: PCIPCI_TRITON -- set TBFX\n",
name);
pr_info("quirk: PCIPCI_TRITON -- set TBFX\n");
ctrl |= CX88X_EN_TBFX;
}
if (pci_pci_problems & PCIPCI_NATOMA) {
printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA -- set TBFX\n",
name);
pr_info("quirk: PCIPCI_NATOMA -- set TBFX\n");
ctrl |= CX88X_EN_TBFX;
}
if (pci_pci_problems & PCIPCI_VIAETBF) {
printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF -- set TBFX\n",
name);
pr_info("quirk: PCIPCI_VIAETBF -- set TBFX\n");
ctrl |= CX88X_EN_TBFX;
}
if (pci_pci_problems & PCIPCI_VSFX) {
printk(KERN_INFO "%s: quirk: PCIPCI_VSFX -- set VSFX\n",
name);
pr_info("quirk: PCIPCI_VSFX -- set VSFX\n");
ctrl |= CX88X_EN_VSFX;
}
#ifdef PCIPCI_ALIMAGIK
if (pci_pci_problems & PCIPCI_ALIMAGIK) {
printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
name);
pr_info("quirk: PCIPCI_ALIMAGIK -- latency fixup\n");
lat = 0x0A;
}
#endif
......@@ -3646,8 +3626,8 @@ static int cx88_pci_quirks(const char *name, struct pci_dev *pci)
pci_write_config_byte(pci, CX88X_DEVCTRL, value);
}
if (UNSET != lat) {
printk(KERN_INFO "%s: setting pci latency timer to %d\n",
name, latency);
pr_info("setting pci latency timer to %d\n",
latency);
pci_write_config_byte(pci, PCI_LATENCY_TIMER, latency);
}
return 0;
......@@ -3659,9 +3639,8 @@ int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci)
pci_resource_len(pci,0),
core->name))
return 0;
printk(KERN_ERR
"%s/%d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n",
core->name, PCI_FUNC(pci->devfn),
pr_err("func %d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n",
PCI_FUNC(pci->devfn),
(unsigned long long)pci_resource_start(pci, 0),
pci->subsystem_vendor, pci->subsystem_device);
return -EBUSY;
......@@ -3755,7 +3734,7 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB))
core->board.num_frontends = 1;
info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
pr_info("subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
pci->subsystem_vendor, pci->subsystem_device, core->board.name,
core->boardnr, card[core->nr] == core->boardnr ?
"insmod option" : "autodetected",
......
......@@ -25,6 +25,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
......@@ -38,7 +40,6 @@
#include <linux/videodev2.h>
#include <linux/mutex.h>
#include "cx88.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
......@@ -60,10 +61,15 @@ static unsigned int nocomb;
module_param(nocomb,int,0644);
MODULE_PARM_DESC(nocomb,"disable comb filter");
#define dprintk(level,fmt, arg...) do { \
#define dprintk0(fmt, arg...) \
printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \
__func__, ##arg) \
#define dprintk(level, fmt, arg...) do { \
if (cx88_core_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, core->name , ## arg); \
} while(0)
printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \
__func__, ##arg); \
} while (0)
static unsigned int cx88_devcount;
static LIST_HEAD(cx88_devlist);
......@@ -363,7 +369,7 @@ int cx88_sram_channel_setup(struct cx88_core *core,
cx_write(ch->cnt1_reg, (bpl >> 3) -1);
cx_write(ch->cnt2_reg, (lines*16) >> 3);
dprintk(2,"sram setup %s: bpl=%d lines=%d\n", ch->name, bpl, lines);
dprintk(2, "sram setup %s: bpl=%d lines=%d\n", ch->name, bpl, lines);
return 0;
}
......@@ -399,12 +405,12 @@ static int cx88_risc_decode(u32 risc)
};
int i;
printk(KERN_DEBUG "0x%08x [ %s", risc,
dprintk0("0x%08x [ %s", risc,
instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
for (i = ARRAY_SIZE(bits)-1; i >= 0; i--)
if (risc & (1 << (i + 12)))
printk(KERN_CONT " %s", bits[i]);
printk(KERN_CONT " count=%d ]\n", risc & 0xfff);
pr_cont(" %s", bits[i]);
pr_cont(" count=%d ]\n", risc & 0xfff);
return incr[risc >> 28] ? incr[risc >> 28] : 1;
}
......@@ -428,43 +434,39 @@ void cx88_sram_channel_dump(struct cx88_core *core,
u32 risc;
unsigned int i,j,n;
printk(KERN_DEBUG "%s: %s - dma channel status dump\n",
core->name,ch->name);
dprintk0("%s - dma channel status dump\n",
ch->name);
for (i = 0; i < ARRAY_SIZE(name); i++)
printk(KERN_DEBUG "%s: cmds: %-12s: 0x%08x\n",
core->name,name[i],
dprintk0(" cmds: %-12s: 0x%08x\n",
name[i],
cx_read(ch->cmds_start + 4*i));
for (n = 1, i = 0; i < 4; i++) {
risc = cx_read(ch->cmds_start + 4 * (i+11));
printk(KERN_CONT "%s: risc%d: ", core->name, i);
pr_cont(" risc%d: ", i);
if (--n)
printk(KERN_CONT "0x%08x [ arg #%d ]\n", risc, n);
pr_cont("0x%08x [ arg #%d ]\n", risc, n);
else
n = cx88_risc_decode(risc);
}
for (i = 0; i < 16; i += n) {
risc = cx_read(ch->ctrl_start + 4 * i);
printk(KERN_DEBUG "%s: iq %x: ", core->name, i);
dprintk0(" iq %x: ", i);
n = cx88_risc_decode(risc);
for (j = 1; j < n; j++) {
risc = cx_read(ch->ctrl_start + 4 * (i+j));
printk(KERN_CONT "%s: iq %x: 0x%08x [ arg #%d ]\n",
core->name, i+j, risc, j);
pr_cont(" iq %x: 0x%08x [ arg #%d ]\n",
i + j, risc, j);
}
}
printk(KERN_DEBUG "%s: fifo: 0x%08x -> 0x%x\n",
core->name, ch->fifo_start, ch->fifo_start+ch->fifo_size);
printk(KERN_DEBUG "%s: ctrl: 0x%08x -> 0x%x\n",
core->name, ch->ctrl_start, ch->ctrl_start+6*16);
printk(KERN_DEBUG "%s: ptr1_reg: 0x%08x\n",
core->name,cx_read(ch->ptr1_reg));
printk(KERN_DEBUG "%s: ptr2_reg: 0x%08x\n",
core->name,cx_read(ch->ptr2_reg));
printk(KERN_DEBUG "%s: cnt1_reg: 0x%08x\n",
core->name,cx_read(ch->cnt1_reg));
printk(KERN_DEBUG "%s: cnt2_reg: 0x%08x\n",
core->name,cx_read(ch->cnt2_reg));
dprintk0("fifo: 0x%08x -> 0x%x\n",
ch->fifo_start, ch->fifo_start+ch->fifo_size);
dprintk0("ctrl: 0x%08x -> 0x%x\n",
ch->ctrl_start, ch->ctrl_start + 6 * 16);
dprintk0(" ptr1_reg: 0x%08x\n", cx_read(ch->ptr1_reg));
dprintk0(" ptr2_reg: 0x%08x\n", cx_read(ch->ptr2_reg));
dprintk0(" cnt1_reg: 0x%08x\n", cx_read(ch->cnt1_reg));
dprintk0(" cnt2_reg: 0x%08x\n", cx_read(ch->cnt2_reg));
}
static const char *cx88_pci_irqs[32] = {
......@@ -474,24 +476,24 @@ static const char *cx88_pci_irqs[32] = {
"i2c", "i2c_rack", "ir_smp", "gpio0", "gpio1"
};
void cx88_print_irqbits(const char *name, const char *tag, const char *strings[],
void cx88_print_irqbits(const char *tag, const char *strings[],
int len, u32 bits, u32 mask)
{
unsigned int i;
printk(KERN_DEBUG "%s: %s [0x%x]", name, tag, bits);
dprintk0("%s [0x%x]", tag, bits);
for (i = 0; i < len; i++) {
if (!(bits & (1 << i)))
continue;
if (strings[i])
printk(KERN_CONT " %s", strings[i]);
pr_cont(" %s", strings[i]);
else
printk(KERN_CONT " %d", i);
pr_cont(" %d", i);
if (!(mask & (1 << i)))
continue;
printk(KERN_CONT "*");
pr_cont("*");
}
printk(KERN_CONT "\n");
pr_cont("\n");
}
/* ------------------------------------------------------------------ */
......@@ -505,7 +507,7 @@ int cx88_core_irq(struct cx88_core *core, u32 status)
handled++;
}
if (!handled)
cx88_print_irqbits(core->name, "irq pci",
cx88_print_irqbits("irq pci",
cx88_pci_irqs, ARRAY_SIZE(cx88_pci_irqs),
status, core->pci_irqmask);
return handled;
......@@ -551,7 +553,7 @@ void cx88_shutdown(struct cx88_core *core)
int cx88_reset(struct cx88_core *core)
{
dprintk(1,"%s\n",__func__);
dprintk(1, "");
cx88_shutdown(core);
/* clear irq status */
......@@ -663,7 +665,7 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig
unsigned int sheight = norm_maxh(core->tvnorm);
u32 value;
dprintk(1,"set_scale: %dx%d [%s%s,%s]\n", width, height,
dprintk(1, "set_scale: %dx%d [%s%s,%s]\n", width, height,
V4L2_FIELD_HAS_TOP(field) ? "T" : "",
V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
v4l2_norm_to_name(core->tvnorm));
......@@ -675,30 +677,30 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig
value &= 0x3fe;
cx_write(MO_HDELAY_EVEN, value);
cx_write(MO_HDELAY_ODD, value);
dprintk(1,"set_scale: hdelay 0x%04x (width %d)\n", value,swidth);
dprintk(1, "set_scale: hdelay 0x%04x (width %d)\n", value, swidth);
value = (swidth * 4096 / width) - 4096;
cx_write(MO_HSCALE_EVEN, value);
cx_write(MO_HSCALE_ODD, value);
dprintk(1,"set_scale: hscale 0x%04x\n", value);
dprintk(1, "set_scale: hscale 0x%04x\n", value);
cx_write(MO_HACTIVE_EVEN, width);
cx_write(MO_HACTIVE_ODD, width);
dprintk(1,"set_scale: hactive 0x%04x\n", width);
dprintk(1, "set_scale: hactive 0x%04x\n", width);
// recalc V scale Register (delay is constant)
cx_write(MO_VDELAY_EVEN, norm_vdelay(core->tvnorm));
cx_write(MO_VDELAY_ODD, norm_vdelay(core->tvnorm));
dprintk(1,"set_scale: vdelay 0x%04x\n", norm_vdelay(core->tvnorm));
dprintk(1, "set_scale: vdelay 0x%04x\n", norm_vdelay(core->tvnorm));
value = (0x10000 - (sheight * 512 / height - 512)) & 0x1fff;
cx_write(MO_VSCALE_EVEN, value);
cx_write(MO_VSCALE_ODD, value);
dprintk(1,"set_scale: vscale 0x%04x\n", value);
dprintk(1, "set_scale: vscale 0x%04x\n", value);
cx_write(MO_VACTIVE_EVEN, sheight);
cx_write(MO_VACTIVE_ODD, sheight);
dprintk(1,"set_scale: vactive 0x%04x\n", sheight);
dprintk(1, "set_scale: vactive 0x%04x\n", sheight);
// setup filters
value = 0;
......@@ -720,7 +722,7 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig
cx_andor(MO_FILTER_EVEN, 0x7ffc7f, value); /* preserve PEAKEN, PSEL */
cx_andor(MO_FILTER_ODD, 0x7ffc7f, value);
dprintk(1,"set_scale: filter 0x%04x\n", value);
dprintk(1, "set_scale: filter 0x%04x\n", value);
return 0;
}
......@@ -743,11 +745,11 @@ static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
do_div(pll,xtal);
reg = (pll & 0x3ffffff) | (pre[prescale] << 26);
if (((reg >> 20) & 0x3f) < 14) {
printk("%s/0: pll out of range\n",core->name);
pr_err("pll out of range\n");
return -1;
}
dprintk(1,"set_pll: MO_PLL_REG 0x%08x [old=0x%08x,freq=%d]\n",
dprintk(1, "set_pll: MO_PLL_REG 0x%08x [old=0x%08x,freq=%d]\n",
reg, cx_read(MO_PLL_REG), ofreq);
cx_write(MO_PLL_REG, reg);
for (i = 0; i < 100; i++) {
......@@ -757,10 +759,10 @@ static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
prescale,ofreq);
return 0;
}
dprintk(1,"pll not locked yet, waiting ...\n");
dprintk(1, "pll not locked yet, waiting ...\n");
msleep(10);
}
dprintk(1,"pll NOT locked [pre=%d,ofreq=%d]\n",prescale,ofreq);
dprintk(1, "pll NOT locked [pre=%d,ofreq=%d]\n", prescale, ofreq);
return -1;
}
......@@ -836,8 +838,8 @@ static int set_tvaudio(struct cx88_core *core)
core->tvaudio = WW_EIAJ;
} else {
printk("%s/0: tvaudio support needs work for this tv norm [%s], sorry\n",
core->name, v4l2_norm_to_name(core->tvnorm));
pr_info("tvaudio support needs work for this tv norm [%s], sorry\n",
v4l2_norm_to_name(core->tvnorm));
core->tvaudio = WW_NONE;
return 0;
}
......@@ -912,12 +914,12 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
cxoformat = 0x181f0008;
}
dprintk(1,"set_tvnorm: \"%s\" fsc8=%d adc=%d vdec=%d db/dr=%d/%d\n",
dprintk(1, "set_tvnorm: \"%s\" fsc8=%d adc=%d vdec=%d db/dr=%d/%d\n",
v4l2_norm_to_name(core->tvnorm), fsc8, adc_clock, vdec_clock,
step_db, step_dr);
set_pll(core,2,vdec_clock);
dprintk(1,"set_tvnorm: MO_INPUT_FORMAT 0x%08x [old=0x%08x]\n",
dprintk(1, "set_tvnorm: MO_INPUT_FORMAT 0x%08x [old=0x%08x]\n",
cxiformat, cx_read(MO_INPUT_FORMAT) & 0x0f);
/* Chroma AGC must be disabled if SECAM is used, we enable it
by default on PAL and NTSC */
......@@ -925,35 +927,36 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
norm & V4L2_STD_SECAM ? cxiformat : cxiformat | 0x400);
// FIXME: as-is from DScaler
dprintk(1,"set_tvnorm: MO_OUTPUT_FORMAT 0x%08x [old=0x%08x]\n",
dprintk(1, "set_tvnorm: MO_OUTPUT_FORMAT 0x%08x [old=0x%08x]\n",
cxoformat, cx_read(MO_OUTPUT_FORMAT));
cx_write(MO_OUTPUT_FORMAT, cxoformat);
// MO_SCONV_REG = adc clock / video dec clock * 2^17
tmp64 = adc_clock * (u64)(1 << 17);
do_div(tmp64, vdec_clock);
dprintk(1,"set_tvnorm: MO_SCONV_REG 0x%08x [old=0x%08x]\n",
dprintk(1, "set_tvnorm: MO_SCONV_REG 0x%08x [old=0x%08x]\n",
(u32)tmp64, cx_read(MO_SCONV_REG));
cx_write(MO_SCONV_REG, (u32)tmp64);
// MO_SUB_STEP = 8 * fsc / video dec clock * 2^22
tmp64 = step_db * (u64)(1 << 22);
do_div(tmp64, vdec_clock);
dprintk(1,"set_tvnorm: MO_SUB_STEP 0x%08x [old=0x%08x]\n",
dprintk(1, "set_tvnorm: MO_SUB_STEP 0x%08x [old=0x%08x]\n",
(u32)tmp64, cx_read(MO_SUB_STEP));
cx_write(MO_SUB_STEP, (u32)tmp64);
// MO_SUB_STEP_DR = 8 * 4406250 / video dec clock * 2^22
tmp64 = step_dr * (u64)(1 << 22);
do_div(tmp64, vdec_clock);
dprintk(1,"set_tvnorm: MO_SUB_STEP_DR 0x%08x [old=0x%08x]\n",
dprintk(1, "set_tvnorm: MO_SUB_STEP_DR 0x%08x [old=0x%08x]\n",
(u32)tmp64, cx_read(MO_SUB_STEP_DR));
cx_write(MO_SUB_STEP_DR, (u32)tmp64);
// bdelay + agcdelay
bdelay = vdec_clock * 65 / 20000000 + 21;
agcdelay = vdec_clock * 68 / 20000000 + 15;
dprintk(1,"set_tvnorm: MO_AGC_BURST 0x%08x [old=0x%08x,bdelay=%d,agcdelay=%d]\n",
dprintk(1,
"set_tvnorm: MO_AGC_BURST 0x%08x [old=0x%08x,bdelay=%d,agcdelay=%d]\n",
(bdelay << 8) | agcdelay, cx_read(MO_AGC_BURST), bdelay, agcdelay);
cx_write(MO_AGC_BURST, (bdelay << 8) | agcdelay);
......@@ -961,7 +964,8 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
tmp64 = norm_htotal(norm) * (u64)vdec_clock;
do_div(tmp64, fsc8);
htotal = (u32)tmp64;
dprintk(1,"set_tvnorm: MO_HTOTAL 0x%08x [old=0x%08x,htotal=%d]\n",
dprintk(1,
"set_tvnorm: MO_HTOTAL 0x%08x [old=0x%08x,htotal=%d]\n",
htotal, cx_read(MO_HTOTAL), (u32)tmp64);
cx_andor(MO_HTOTAL, 0x07ff, htotal);
......
......@@ -19,15 +19,15 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include "cx88-reg.h"
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <asm/div64.h>
#include "cx88.h"
#include "cx88-reg.h"
#define INT_PI ((s32)(3.141592653589 * 32768.0))
#define compat_remainder(a, b) \
......@@ -71,8 +71,11 @@ static unsigned int dsp_debug;
module_param(dsp_debug, int, 0644);
MODULE_PARM_DESC(dsp_debug, "enable audio dsp debug messages");
#define dprintk(level, fmt, arg...) if (dsp_debug >= level) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
#define dprintk(level, fmt, arg...) do { \
if (dsp_debug >= level) \
printk(KERN_DEBUG pr_fmt("%s: dsp:" fmt), \
__func__, ##arg); \
} while (0)
static s32 int_cos(u32 x)
{
......@@ -176,8 +179,8 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
dual_freq = FREQ_EIAJ_DUAL;
break;
default:
printk(KERN_WARNING "%s/0: unsupported audio mode %d for %s\n",
core->name, core->tvaudio, __func__);
pr_warn("unsupported audio mode %d for %s\n",
core->tvaudio, __func__);
return UNSET;
}
......
......@@ -21,6 +21,9 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include "dvb-pll.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
......@@ -29,8 +32,6 @@
#include <linux/file.h>
#include <linux/suspend.h>
#include "cx88.h"
#include "dvb-pll.h"
#include <media/v4l2-common.h>
#include "mt352.h"
......@@ -77,8 +78,11 @@ MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define dprintk(level,fmt, arg...) if (debug >= level) \
printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg)
#define dprintk(level, fmt, arg...) do { \
if (debug >= level) \
printk(KERN_DEBUG pr_fmt("%s: dvb:" fmt), \
__func__, ##arg); \
} while (0)
/* ------------------------------------------------------------------ */
......@@ -178,7 +182,7 @@ static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire)
fe_id = vb2_dvb_find_frontend(&dev->frontends, fe);
if (!fe_id) {
printk(KERN_ERR "%s() No frontend found\n", __func__);
pr_err("%s() No frontend found\n", __func__);
return -EINVAL;
}
......@@ -625,8 +629,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
return -EINVAL;
if (!fe0->dvb.frontend) {
printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc3028\n",
dev->core->name);
pr_err("dvb frontend not attached. Can't attach xc3028\n");
return -EINVAL;
}
......@@ -639,16 +642,14 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->core->name);
pr_err("xc3028 attach failed\n");
dvb_frontend_detach(fe0->dvb.frontend);
dvb_unregister_frontend(fe0->dvb.frontend);
fe0->dvb.frontend = NULL;
return -EINVAL;
}
printk(KERN_INFO "%s/2: xc3028 attached\n",
dev->core->name);
pr_info("xc3028 attached\n");
return 0;
}
......@@ -664,23 +665,21 @@ static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
return -EINVAL;
if (!fe0->dvb.frontend) {
printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc4000\n",
dev->core->name);
pr_err("dvb frontend not attached. Can't attach xc4000\n");
return -EINVAL;
}
fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap,
cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc4000 attach failed\n",
dev->core->name);
pr_err("xc4000 attach failed\n");
dvb_frontend_detach(fe0->dvb.frontend);
dvb_unregister_frontend(fe0->dvb.frontend);
fe0->dvb.frontend = NULL;
return -EINVAL;
}
printk(KERN_INFO "%s/2: xc4000 attached\n", dev->core->name);
pr_info("xc4000 attached\n");
return 0;
}
......@@ -798,12 +797,12 @@ static int cx8802_alloc_frontends(struct cx8802_dev *dev)
if (!core->board.num_frontends)
return -ENODEV;
printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
pr_info("%s: allocating %d frontend(s)\n", __func__,
core->board.num_frontends);
for (i = 1; i <= core->board.num_frontends; i++) {
fe = vb2_dvb_alloc_frontend(&dev->frontends, i);
if (!fe) {
printk(KERN_ERR "%s() failed to alloc\n", __func__);
pr_err("%s() failed to alloc\n", __func__);
vb2_dvb_dealloc_frontends(&dev->frontends);
return -ENOMEM;
}
......@@ -1007,7 +1006,7 @@ static int dvb_register(struct cx8802_dev *dev)
int res = -EINVAL;
if (0 != core->i2c_rc) {
printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
pr_err("no i2c-bus available, cannot attach dvb drivers\n");
goto frontend_detach;
}
......@@ -1182,8 +1181,7 @@ static int dvb_register(struct cx8802_dev *dev)
goto frontend_detach;
}
#else
printk(KERN_ERR "%s/2: built without vp3054 support\n",
core->name);
pr_err("built without vp3054 support\n");
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
......@@ -1615,15 +1613,12 @@ static int dvb_register(struct cx8802_dev *dev)
break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
core->name);
pr_err("The frontend of your DVB/ATSC card isn't supported yet\n");
break;
}
if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) {
printk(KERN_ERR
"%s/2: frontend initialization failed\n",
core->name);
pr_err("frontend initialization failed\n");
goto frontend_detach;
}
/* define general-purpose callback pointer */
......@@ -1762,7 +1757,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
goto fail_core;
/* dvb stuff */
printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
pr_info("cx2388x based DVB/ATSC card\n");
dev->ts_gen_cntrl = 0x0c;
err = cx8802_alloc_frontends(dev);
......@@ -1774,7 +1769,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
fe = vb2_dvb_get_frontend(&core->dvbdev->frontends, i);
if (fe == NULL) {
printk(KERN_ERR "%s() failed to get frontend(%d)\n",
pr_err("%s() failed to get frontend(%d)\n",
__func__, i);
err = -ENODEV;
goto fail_probe;
......@@ -1803,8 +1798,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
err = dvb_register(dev);
if (err)
/* frontends/adapter de-allocated in dvb_register */
printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
core->name, err);
pr_err("dvb_register failed (err = %d)\n", err);
return err;
fail_probe:
vb2_dvb_dealloc_frontends(&core->dvbdev->frontends);
......@@ -1839,8 +1833,7 @@ static struct cx8802_driver cx8802_dvb_driver = {
static int __init dvb_init(void)
{
printk(KERN_INFO "cx88/2: cx2388x dvb driver version %s loaded\n",
CX88_VERSION);
pr_info("cx2388x dvb driver version %s loaded\n", CX88_VERSION);
return cx8802_register_driver(&cx8802_dvb_driver);
}
......
......@@ -27,12 +27,13 @@
*/
#include "cx88.h"
#include <linux/module.h>
#include <linux/init.h>
#include <asm/io.h>
#include "cx88.h"
#include <media/v4l2-common.h>
static unsigned int i2c_debug;
......@@ -47,8 +48,11 @@ static unsigned int i2c_udelay = 5;
module_param(i2c_udelay, int, 0644);
MODULE_PARM_DESC(i2c_udelay, "i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
#define dprintk(level,fmt, arg...) if (i2c_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)
#define dprintk(level, fmt, arg...) do { \
if (i2c_debug >= level) \
printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \
__func__, ##arg); \
} while (0)
/* ----------------------------------------------------------------------- */
......@@ -126,8 +130,8 @@ static void do_i2c_scan(const char *name, struct i2c_client *c)
rc = i2c_master_recv(c,&buf,0);
if (rc < 0)
continue;
printk("%s: i2c scan: found device @ 0x%x [%s]\n",
name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
pr_info("i2c scan: found device @ 0x%x [%s]\n",
i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
}
......@@ -166,8 +170,7 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
case CX88_BOARD_HAUPPAUGE_HVR1300:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR4000:
printk("%s: i2c init: enabling analog demod on HVR1300/3000/4000 tuner\n",
core->name);
pr_info("i2c init: enabling analog demod on HVR1300/3000/4000 tuner\n");
i2c_transfer(core->i2c_client.adapter, &tuner_msg, 1);
break;
default:
......@@ -176,7 +179,7 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
if (i2c_scan)
do_i2c_scan(core->name,&core->i2c_client);
} else
printk("%s: i2c register FAILED\n", core->name);
pr_err("i2c register FAILED\n");
return core->i2c_rc;
}
......@@ -22,13 +22,14 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "cx88.h"
#include <linux/init.h>
#include <linux/hrtimer.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
#include "cx88.h"
#include <media/rc-core.h>
#define MODULE_NAME "cx88xx"
......
......@@ -22,6 +22,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
......@@ -30,8 +32,6 @@
#include <linux/interrupt.h>
#include <asm/delay.h>
#include "cx88.h"
/* ------------------------------------------------------------------ */
MODULE_DESCRIPTION("mpeg driver for cx2388x based TV cards");
......@@ -47,13 +47,9 @@ MODULE_PARM_DESC(debug,"enable debug messages [mpeg]");
#define dprintk(level, fmt, arg...) do { \
if (debug + 1 > level) \
printk(KERN_DEBUG "%s/2-mpeg: " fmt, dev->core->name, ## arg); \
} while(0)
#define mpeg_dbg(level, fmt, arg...) do { \
if (debug + 1 > level) \
printk(KERN_DEBUG "%s/2-mpeg: " fmt, core->name, ## arg); \
} while(0)
printk(KERN_DEBUG pr_fmt("%s: mpeg:" fmt), \
__func__, ##arg); \
} while (0)
#if defined(CONFIG_MODULES) && defined(MODULE)
static void request_module_async(struct work_struct *work)
......@@ -92,7 +88,7 @@ int cx8802_start_dma(struct cx8802_dev *dev,
{
struct cx88_core *core = dev->core;
dprintk(1, "cx8802_start_dma w: %d, h: %d, f: %d\n",
dprintk(1, "w: %d, h: %d, f: %d\n",
core->width, core->height, core->field);
/* setup fifo + format */
......@@ -105,12 +101,12 @@ int cx8802_start_dma(struct cx8802_dev *dev,
/* FIXME: this needs a review.
* also: move to cx88-blackbird + cx88-dvb source files? */
dprintk( 1, "core->active_type_id = 0x%08x\n", core->active_type_id);
dprintk(1, "core->active_type_id = 0x%08x\n", core->active_type_id);
if ( (core->active_type_id == CX88_MPEG_DVB) &&
(core->board.mpeg & CX88_MPEG_DVB) ) {
dprintk( 1, "cx8802_start_dma doing .dvb\n");
dprintk(1, "cx8802_start_dma doing .dvb\n");
/* negedge driven & software reset */
cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl);
udelay(100);
......@@ -154,7 +150,7 @@ int cx8802_start_dma(struct cx8802_dev *dev,
udelay(100);
} else if ( (core->active_type_id == CX88_MPEG_BLACKBIRD) &&
(core->board.mpeg & CX88_MPEG_BLACKBIRD) ) {
dprintk( 1, "cx8802_start_dma doing .blackbird\n");
dprintk(1, "cx8802_start_dma doing .blackbird\n");
cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */
cx_write(TS_GEN_CNTRL, 0x46); /* punctured clock TS & posedge driven & software reset */
......@@ -166,8 +162,8 @@ int cx8802_start_dma(struct cx8802_dev *dev,
cx_write(TS_GEN_CNTRL, 0x06); /* punctured clock TS & posedge driven */
udelay(100);
} else {
printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __func__,
core->board.mpeg );
pr_err("%s() Failed. Unsupported value in .mpeg (0x%08x)\n",
__func__, core->board.mpeg);
return -EINVAL;
}
......@@ -176,7 +172,7 @@ int cx8802_start_dma(struct cx8802_dev *dev,
q->count = 0;
/* enable irqs */
dprintk( 1, "setting the interrupt mask\n" );
dprintk(1, "setting the interrupt mask\n");
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
cx_set(MO_TS_INTMSK, 0x1f0011);
......@@ -189,7 +185,7 @@ int cx8802_start_dma(struct cx8802_dev *dev,
static int cx8802_stop_dma(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
dprintk( 1, "cx8802_stop_dma\n" );
dprintk(1, "\n");
/* stop dma */
cx_clear(MO_TS_DMACNTRL, 0x11);
......@@ -208,7 +204,7 @@ static int cx8802_restart_queue(struct cx8802_dev *dev,
{
struct cx88_buffer *buf;
dprintk( 1, "cx8802_restart_queue\n" );
dprintk(1, "\n");
if (list_empty(&q->active))
return 0;
......@@ -249,25 +245,25 @@ void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf)
struct cx88_buffer *prev;
struct cx88_dmaqueue *cx88q = &dev->mpegq;
dprintk( 1, "cx8802_buf_queue\n" );
dprintk(1, "\n");
/* add jump to start */
buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8);
buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8);
if (list_empty(&cx88q->active)) {
dprintk( 1, "queue is empty - first active\n" );
dprintk(1, "queue is empty - first active\n");
list_add_tail(&buf->list, &cx88q->active);
dprintk(1,"[%p/%d] %s - first active\n",
buf, buf->vb.vb2_buf.index, __func__);
} else {
buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
dprintk( 1, "queue is not empty - append to active\n" );
dprintk(1, "queue is not empty - append to active\n");
prev = list_entry(cx88q->active.prev, struct cx88_buffer, list);
list_add_tail(&buf->list, &cx88q->active);
prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
dprintk( 1, "[%p/%d] %s - append to active\n",
dprintk(1, "[%p/%d] %s - append to active\n",
buf, buf->vb.vb2_buf.index, __func__);
}
}
......@@ -291,7 +287,7 @@ static void do_cancel_buffers(struct cx8802_dev *dev)
void cx8802_cancel_buffers(struct cx8802_dev *dev)
{
dprintk( 1, "cx8802_cancel_buffers" );
dprintk(1, "\n");
cx8802_stop_dma(dev);
do_cancel_buffers(dev);
}
......@@ -310,7 +306,7 @@ static void cx8802_mpeg_irq(struct cx8802_dev *dev)
struct cx88_core *core = dev->core;
u32 status, mask, count;
dprintk( 1, "cx8802_mpeg_irq\n" );
dprintk(1, "\n");
status = cx_read(MO_TS_INTSTAT);
mask = cx_read(MO_TS_INTMSK);
if (0 == (status & mask))
......@@ -319,20 +315,20 @@ static void cx8802_mpeg_irq(struct cx8802_dev *dev)
cx_write(MO_TS_INTSTAT, status);
if (debug || (status & mask & ~0xff))
cx88_print_irqbits(core->name, "irq mpeg ",
cx88_print_irqbits("irq mpeg ",
cx88_mpeg_irqs, ARRAY_SIZE(cx88_mpeg_irqs),
status, mask);
/* risc op code error */
if (status & (1 << 16)) {
printk(KERN_WARNING "%s: mpeg risc op code error\n",core->name);
pr_warn("mpeg risc op code error\n");
cx_clear(MO_TS_DMACNTRL, 0x11);
cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH28]);
}
/* risc1 y */
if (status & 0x01) {
dprintk( 1, "wake up\n" );
dprintk(1, "wake up\n");
spin_lock(&dev->slock);
count = cx_read(MO_TS_GPCNT);
cx88_wakeup(dev->core, &dev->mpegq, count);
......@@ -341,7 +337,7 @@ static void cx8802_mpeg_irq(struct cx8802_dev *dev)
/* other general errors */
if (status & 0x1f0100) {
dprintk( 0, "general errors: 0x%08x\n", status & 0x1f0100 );
dprintk(0, "general errors: 0x%08x\n", status & 0x1f0100);
spin_lock(&dev->slock);
cx8802_stop_dma(dev);
spin_unlock(&dev->slock);
......@@ -362,9 +358,9 @@ static irqreturn_t cx8802_irq(int irq, void *dev_id)
(core->pci_irqmask | PCI_INT_TSINT);
if (0 == status)
goto out;
dprintk( 1, "cx8802_irq\n" );
dprintk( 1, " loop: %d/%d\n", loop, MAX_IRQ_LOOP );
dprintk( 1, " status: %d\n", status );
dprintk(1, "cx8802_irq\n");
dprintk(1, " loop: %d/%d\n", loop, MAX_IRQ_LOOP);
dprintk(1, " status: %d\n", status);
handled = 1;
cx_write(MO_PCI_INTSTAT, status);
......@@ -374,9 +370,8 @@ static irqreturn_t cx8802_irq(int irq, void *dev_id)
cx8802_mpeg_irq(dev);
}
if (MAX_IRQ_LOOP == loop) {
dprintk( 0, "clearing mask\n" );
printk(KERN_WARNING "%s/0: irq loop -- clearing mask\n",
core->name);
dprintk(0, "clearing mask\n");
pr_warn("irq loop -- clearing mask\n");
cx_write(MO_PCI_INTMSK,0);
}
......@@ -395,16 +390,16 @@ static int cx8802_init_common(struct cx8802_dev *dev)
pci_set_master(dev->pci);
err = pci_set_dma_mask(dev->pci,DMA_BIT_MASK(32));
if (err) {
printk("%s/2: Oops: no 32bit PCI DMA ???\n",dev->core->name);
pr_err("Oops: no 32bit PCI DMA ???\n");
return -EIO;
}
dev->pci_rev = dev->pci->revision;
pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat);
printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
dev->core->name,
pr_info("found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
pci_name(dev->pci), dev->pci_rev, dev->pci->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0));
dev->pci_lat,
(unsigned long long)pci_resource_start(dev->pci, 0));
/* initialize driver struct */
spin_lock_init(&dev->slock);
......@@ -416,8 +411,7 @@ static int cx8802_init_common(struct cx8802_dev *dev)
err = request_irq(dev->pci->irq, cx8802_irq,
IRQF_SHARED, dev->core->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get IRQ %d\n",
dev->core->name, dev->pci->irq);
pr_err("can't get IRQ %d\n", dev->pci->irq);
return err;
}
cx_set(MO_PCI_INTMSK, core->pci_irqmask);
......@@ -429,7 +423,7 @@ static int cx8802_init_common(struct cx8802_dev *dev)
static void cx8802_fini_common(struct cx8802_dev *dev)
{
dprintk( 2, "cx8802_fini_common\n" );
dprintk(2, "\n");
cx8802_stop_dma(dev);
pci_disable_device(dev->pci);
......@@ -442,14 +436,13 @@ static void cx8802_fini_common(struct cx8802_dev *dev)
static int cx8802_suspend_common(struct pci_dev *pci_dev, pm_message_t state)
{
struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
struct cx88_core *core = dev->core;
unsigned long flags;
/* stop mpeg dma */
spin_lock_irqsave(&dev->slock, flags);
if (!list_empty(&dev->mpegq.active)) {
dprintk( 2, "suspend\n" );
printk("%s: suspend mpeg\n", core->name);
dprintk(2, "suspend\n");
pr_info("suspend mpeg\n");
cx8802_stop_dma(dev);
}
spin_unlock_irqrestore(&dev->slock, flags);
......@@ -468,23 +461,20 @@ static int cx8802_suspend_common(struct pci_dev *pci_dev, pm_message_t state)
static int cx8802_resume_common(struct pci_dev *pci_dev)
{
struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
struct cx88_core *core = dev->core;
unsigned long flags;
int err;
if (dev->state.disabled) {
err=pci_enable_device(pci_dev);
if (err) {
printk(KERN_ERR "%s: can't enable device\n",
dev->core->name);
pr_err("can't enable device\n");
return err;
}
dev->state.disabled = 0;
}
err=pci_set_power_state(pci_dev, PCI_D0);
if (err) {
printk(KERN_ERR "%s: can't enable device\n",
dev->core->name);
pr_err("can't enable device\n");
pci_disable_device(pci_dev);
dev->state.disabled = 1;
......@@ -498,7 +488,7 @@ static int cx8802_resume_common(struct pci_dev *pci_dev)
/* restart video+vbi capture */
spin_lock_irqsave(&dev->slock, flags);
if (!list_empty(&dev->mpegq.active)) {
printk("%s: resume mpeg\n", core->name);
pr_info("resume mpeg\n");
cx8802_restart_queue(dev,&dev->mpegq);
}
spin_unlock_irqrestore(&dev->slock, flags);
......@@ -550,7 +540,7 @@ static int cx8802_request_acquire(struct cx8802_driver *drv)
drv->advise_acquire(drv);
}
mpeg_dbg(1,"%s() Post acquire GPIO=%x\n", __func__, cx_read(MO_GP0_IO));
dprintk(1, "Post acquire GPIO=%x\n", cx_read(MO_GP0_IO));
}
return 0;
......@@ -571,7 +561,7 @@ static int cx8802_request_release(struct cx8802_driver *drv)
drv->advise_release(drv);
core->active_type_id = CX88_BOARD_NONE;
mpeg_dbg(1,"%s() Post release GPIO=%x\n", __func__, cx_read(MO_GP0_IO));
dprintk(1, "Post release GPIO=%x\n", cx_read(MO_GP0_IO));
}
return 0;
......@@ -605,22 +595,20 @@ int cx8802_register_driver(struct cx8802_driver *drv)
struct cx8802_driver *driver;
int err, i = 0;
printk(KERN_INFO
"cx88/2: registering cx8802 driver, type: %s access: %s\n",
pr_info("registering cx8802 driver, type: %s access: %s\n",
drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive");
if ((err = cx8802_check_driver(drv)) != 0) {
printk(KERN_ERR "cx88/2: cx8802_driver is invalid\n");
pr_err("cx8802_driver is invalid\n");
return err;
}
mutex_lock(&cx8802_mutex);
list_for_each_entry(dev, &cx8802_devlist, devlist) {
printk(KERN_INFO
"%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n",
dev->core->name, dev->pci->subsystem_vendor,
pr_info("subsystem: %04x:%04x, board: %s [card=%d]\n",
dev->pci->subsystem_vendor,
dev->pci->subsystem_device, dev->core->board.name,
dev->core->boardnr);
......@@ -645,9 +633,7 @@ int cx8802_register_driver(struct cx8802_driver *drv)
i++;
list_add_tail(&driver->drvlist, &dev->drvlist);
} else {
printk(KERN_ERR
"%s/2: cx8802 probe failed, err = %d\n",
dev->core->name, err);
pr_err("cx8802 probe failed, err = %d\n", err);
}
mutex_unlock(&drv->core->lock);
}
......@@ -664,17 +650,15 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
struct cx8802_driver *d, *dtmp;
int err = 0;
printk(KERN_INFO
"cx88/2: unregistering cx8802 driver, type: %s access: %s\n",
pr_info("unregistering cx8802 driver, type: %s access: %s\n",
drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive");
mutex_lock(&cx8802_mutex);
list_for_each_entry(dev, &cx8802_devlist, devlist) {
printk(KERN_INFO
"%s/2: subsystem: %04x:%04x, board: %s [card=%d]\n",
dev->core->name, dev->pci->subsystem_vendor,
pr_info("subsystem: %04x:%04x, board: %s [card=%d]\n",
dev->pci->subsystem_vendor,
dev->pci->subsystem_device, dev->core->board.name,
dev->core->boardnr);
......@@ -690,8 +674,8 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
list_del(&d->drvlist);
kfree(d);
} else
printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
dev->core->name, err);
pr_err("cx8802 driver remove failed (%d)\n",
err);
}
mutex_unlock(&dev->core->lock);
......@@ -715,7 +699,7 @@ static int cx8802_probe(struct pci_dev *pci_dev,
if (NULL == core)
return -EINVAL;
printk("%s/2: cx2388x 8802 Driver Manager\n", core->name);
pr_info("cx2388x 8802 Driver Manager\n");
err = -ENODEV;
if (!core->board.mpeg)
......@@ -758,7 +742,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
dev = pci_get_drvdata(pci_dev);
dprintk( 1, "%s\n", __func__);
dprintk(1, "%s\n", __func__);
flush_request_modules(dev);
......@@ -768,16 +752,15 @@ static void cx8802_remove(struct pci_dev *pci_dev)
struct cx8802_driver *drv, *tmp;
int err;
printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n",
dev->core->name);
pr_warn("Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n");
list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) {
err = drv->remove(drv);
if (err == 0) {
list_del(&drv->drvlist);
} else
printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
dev->core->name, err);
pr_err("cx8802 driver remove failed (%d)\n",
err);
kfree(drv);
}
}
......
......@@ -35,6 +35,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/freezer.h>
......@@ -50,8 +52,6 @@
#include <linux/delay.h>
#include <linux/kthread.h>
#include "cx88.h"
static unsigned int audio_debug;
module_param(audio_debug, int, 0644);
MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
......@@ -64,9 +64,11 @@ static unsigned int radio_deemphasis;
module_param(radio_deemphasis,int,0644);
MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)");
#define dprintk(fmt, arg...) if (audio_debug) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
#define dprintk(fmt, arg...) do { \
if (audio_debug) \
printk(KERN_DEBUG pr_fmt("%s: tvaudio:" fmt), \
__func__, ##arg); \
} while (0)
/* ----------------------------------------------------------- */
static const char * const aud_ctl_names[64] = {
......@@ -797,8 +799,7 @@ void cx88_set_tvaudio(struct cx88_core *core)
break;
case WW_NONE:
case WW_I2SPT:
printk("%s/0: unknown tv audio mode [%d]\n",
core->name, core->tvaudio);
pr_info("unknown tv audio mode [%d]\n", core->tvaudio);
break;
}
return;
......
/*
*/
#include "cx88.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include "cx88.h"
static unsigned int vbi_debug;
module_param(vbi_debug,int,0644);
MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]");
#define dprintk(level,fmt, arg...) if (vbi_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg)
#define dprintk(level, fmt, arg...) do { \
if (vbi_debug >= level) \
printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt), \
__func__, ##arg); \
} while (0)
/* ------------------------------------------------------------------ */
......
......@@ -25,6 +25,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx88.h"
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
......@@ -37,7 +39,6 @@
#include <linux/kthread.h>
#include <asm/div64.h>
#include "cx88.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-event.h>
......@@ -70,8 +71,12 @@ static unsigned int irq_debug;
module_param(irq_debug,int,0644);
MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
#define dprintk(level,fmt, arg...) if (video_debug >= level) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
#define dprintk(level, fmt, arg...) do { \
if (video_debug >= level) \
printk(KERN_DEBUG pr_fmt("%s: video:" fmt), \
__func__, ##arg); \
} while (0)
/* ------------------------------------------------------------------- */
/* static data */
......@@ -414,7 +419,6 @@ static int stop_video_dma(struct cx8800_dev *dev)
static int restart_video_queue(struct cx8800_dev *dev,
struct cx88_dmaqueue *q)
{
struct cx88_core *core = dev->core;
struct cx88_buffer *buf;
if (!list_empty(&q->active)) {
......@@ -513,7 +517,6 @@ static void buffer_queue(struct vb2_buffer *vb)
struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
struct cx88_buffer *prev;
struct cx88_core *core = dev->core;
struct cx88_dmaqueue *q = &dev->vidq;
/* add jump to start */
......@@ -1090,13 +1093,13 @@ static void cx8800_vid_irq(struct cx8800_dev *dev)
return;
cx_write(MO_VID_INTSTAT, status);
if (irq_debug || (status & mask & ~0xff))
cx88_print_irqbits(core->name, "irq vid",
cx88_print_irqbits("irq vid",
cx88_vid_irqs, ARRAY_SIZE(cx88_vid_irqs),
status, mask);
/* risc op code error */
if (status & (1 << 16)) {
printk(KERN_WARNING "%s/0: video risc op code error\n",core->name);
pr_warn("video risc op code error\n");
cx_clear(MO_VID_DMACNTRL, 0x11);
cx_clear(VID_CAPTURE_CONTROL, 0x06);
cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH21]);
......@@ -1140,8 +1143,7 @@ static irqreturn_t cx8800_irq(int irq, void *dev_id)
cx8800_vid_irq(dev);
}
if (10 == loop) {
printk(KERN_WARNING "%s/0: irq loop -- clearing mask\n",
core->name);
pr_warn("irq loop -- clearing mask\n");
cx_write(MO_PCI_INTMSK,0);
}
......@@ -1307,15 +1309,15 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
core->name,
pr_info("found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
dev->pci_lat,
(unsigned long long)pci_resource_start(pci_dev, 0));
pci_set_master(pci_dev);
err = pci_set_dma_mask(pci_dev,DMA_BIT_MASK(32));
if (err) {
printk("%s/0: Oops: no 32bit PCI DMA ???\n",core->name);
pr_err("Oops: no 32bit PCI DMA ???\n");
goto fail_core;
}
......@@ -1332,8 +1334,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
err = request_irq(pci_dev->irq, cx8800_irq,
IRQF_SHARED, core->name, dev);
if (err < 0) {
printk(KERN_ERR "%s/0: can't get IRQ %d\n",
core->name,pci_dev->irq);
pr_err("can't get IRQ %d\n", pci_dev->irq);
goto fail_core;
}
cx_set(MO_PCI_INTMSK, core->pci_irqmask);
......@@ -1470,12 +1471,11 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
err = video_register_device(&dev->video_dev, VFL_TYPE_GRABBER,
video_nr[core->nr]);
if (err < 0) {
printk(KERN_ERR "%s/0: can't register video device\n",
core->name);
pr_err("can't register video device\n");
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device %s [v4l2]\n",
core->name, video_device_node_name(&dev->video_dev));
pr_info("registered device %s [v4l2]\n",
video_device_node_name(&dev->video_dev));
cx88_vdev_init(core, dev->pci, &dev->vbi_dev,
&cx8800_vbi_template, "vbi");
......@@ -1484,12 +1484,11 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
err = video_register_device(&dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[core->nr]);
if (err < 0) {
printk(KERN_ERR "%s/0: can't register vbi device\n",
core->name);
pr_err("can't register vbi device\n");
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device %s\n",
core->name, video_device_node_name(&dev->vbi_dev));
pr_info("registered device %s\n",
video_device_node_name(&dev->vbi_dev));
if (core->board.radio.type == CX88_RADIO) {
cx88_vdev_init(core, dev->pci, &dev->radio_dev,
......@@ -1499,12 +1498,11 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
err = video_register_device(&dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[core->nr]);
if (err < 0) {
printk(KERN_ERR "%s/0: can't register radio device\n",
core->name);
pr_err("can't register radio device\n");
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device %s\n",
core->name, video_device_node_name(&dev->radio_dev));
pr_info("registered device %s\n",
video_device_node_name(&dev->radio_dev));
}
/* start tvaudio thread */
......@@ -1512,8 +1510,8 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
core->kthread = kthread_run(cx88_audio_thread, core, "cx88 tvaudio");
if (IS_ERR(core->kthread)) {
err = PTR_ERR(core->kthread);
printk(KERN_ERR "%s/0: failed to create cx88 audio thread, err=%d\n",
core->name, err);
pr_err("failed to create cx88 audio thread, err=%d\n",
err);
}
}
mutex_unlock(&core->lock);
......@@ -1571,11 +1569,11 @@ static int cx8800_suspend(struct pci_dev *pci_dev, pm_message_t state)
/* stop video+vbi capture */
spin_lock_irqsave(&dev->slock, flags);
if (!list_empty(&dev->vidq.active)) {
printk("%s/0: suspend video\n", core->name);
pr_info("suspend video\n");
stop_video_dma(dev);
}
if (!list_empty(&dev->vbiq.active)) {
printk("%s/0: suspend vbi\n", core->name);
pr_info("suspend vbi\n");
cx8800_stop_vbi_dma(dev);
}
spin_unlock_irqrestore(&dev->slock, flags);
......@@ -1603,8 +1601,7 @@ static int cx8800_resume(struct pci_dev *pci_dev)
if (dev->state.disabled) {
err=pci_enable_device(pci_dev);
if (err) {
printk(KERN_ERR "%s/0: can't enable device\n",
core->name);
pr_err("can't enable device\n");
return err;
}
......@@ -1612,7 +1609,7 @@ static int cx8800_resume(struct pci_dev *pci_dev)
}
err= pci_set_power_state(pci_dev, PCI_D0);
if (err) {
printk(KERN_ERR "%s/0: can't set power state\n", core->name);
pr_err("can't set power state\n");
pci_disable_device(pci_dev);
dev->state.disabled = 1;
......@@ -1630,11 +1627,11 @@ static int cx8800_resume(struct pci_dev *pci_dev)
/* restart video+vbi capture */
spin_lock_irqsave(&dev->slock, flags);
if (!list_empty(&dev->vidq.active)) {
printk("%s/0: resume video\n", core->name);
pr_info("resume video\n");
restart_video_queue(dev,&dev->vidq);
}
if (!list_empty(&dev->vbiq.active)) {
printk("%s/0: resume vbi\n", core->name);
pr_info("resume vbi\n");
cx8800_restart_vbi_queue(dev,&dev->vbiq);
}
spin_unlock_irqrestore(&dev->slock, flags);
......
......@@ -22,15 +22,15 @@
*/
#include "cx88.h"
#include "cx88-vp3054-i2c.h"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <asm/io.h>
#include "cx88.h"
#include "cx88-vp3054-i2c.h"
MODULE_DESCRIPTION("driver for cx2388x VP3054 design");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
MODULE_LICENSE("GPL");
......@@ -133,7 +133,7 @@ int vp3054_i2c_probe(struct cx8802_dev *dev)
rc = i2c_bit_add_bus(&vp3054_i2c->adap);
if (0 != rc) {
printk("%s: vp3054_i2c register FAILED\n", core->name);
pr_err("vp3054_i2c register FAILED\n");
kfree(dev->vp3054);
dev->vp3054 = NULL;
......
......@@ -19,6 +19,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef CX88_H
#define CX88_H
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
......@@ -614,7 +619,7 @@ struct cx8802_dev {
extern unsigned int cx88_core_debug;
extern void cx88_print_irqbits(const char *name, const char *tag, const char *strings[],
extern void cx88_print_irqbits(const char *tag, const char *strings[],
int len, u32 bits, u32 mask);
extern int cx88_core_irq(struct cx88_core *core, u32 status);
......@@ -738,3 +743,5 @@ int cx88_set_freq(struct cx88_core *core, const struct v4l2_frequency *f);
int cx88_video_mux(struct cx88_core *core, unsigned int input);
void cx88_querycap(struct file *file, struct cx88_core *core,
struct v4l2_capability *cap);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment