Skip to content

L
linux
Commit 65d24f11 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://linux-scsi.bkbits.net/scsi-for-linus-2.6 

into home.osdl.org:/home/torvalds/v2.5/linux
parents b0e71240 e8d2250b
Show whitespace changes
Inline Side-by-side
Showing with 71 additions and 23 deletions
drivers/scsi/Kconfig
View file @ 65d24f11
...@@ -1563,7 +1563,7 @@ config OKTAGON_SCSI ...@@ -1563,7 +1563,7 @@ config OKTAGON_SCSI
If you have the BSC Oktagon SCSI disk controller for the Amiga, say If you have the BSC Oktagon SCSI disk controller for the Amiga, say
Y to this question. If you're in doubt about whether you have one, Y to this question. If you're in doubt about whether you have one,
see the picture at see the picture at
<http://amiga.multigraph.com/photos/oktagon.html>. <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
config ATARI_SCSI config ATARI_SCSI
tristate "Atari native SCSI support" tristate "Atari native SCSI support"
......
drivers/scsi/aacraid/aacraid.h
View file @ 65d24f11
...@@ -525,7 +525,15 @@ struct aac_driver_ident ...@@ -525,7 +525,15 @@ struct aac_driver_ident
char * vname; char * vname;
char * model; char * model;
u16 channels; u16 channels;
int quirks;
}; };
/*
* Some adapter firmware needs communication memory
* below 2gig. This tells the init function to set the
* dma mask such that fib memory will be allocated where the
* adapter firmware can get to it.
*/
#define AAC_QUIRK_31BIT 1
/* /*
* The adapter interface specs all queues to be located in the same * The adapter interface specs all queues to be located in the same
......
drivers/scsi/aacraid/linit.c
View file @ 65d24f11
...@@ -119,22 +119,22 @@ MODULE_DEVICE_TABLE(pci, aac_pci_tbl); ...@@ -119,22 +119,22 @@ MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
* for the card. At that time we can remove the channels from here * for the card. At that time we can remove the channels from here
*/ */
static struct aac_driver_ident aac_drivers[] = { static struct aac_driver_ident aac_drivers[] = {
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 2/Si */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 2/Si */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Di */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Di */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Si */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Si */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Si */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Si */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Di */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Di */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Di */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Di */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Di */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Di */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Di */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Di */
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2 }, /* PERC 3/Di */ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT }, /* PERC 3/Di */
{ aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2 }, /* catapult*/ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT }, /* catapult*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2 }, /* tomcat*/ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT }, /* tomcat*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1 }, /* Adaptec 2120S (Crusader)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT }, /* Adaptec 2120S (Crusader)*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2 }, /* Adaptec 2200S (Vulcan)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT }, /* Adaptec 2200S (Vulcan)*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2 }, /* Adaptec 2200S (Vulcan-2m)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT }, /* Adaptec 2200S (Vulcan-2m)*/
{ aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1 }, /* Legend S220*/ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT }, /* Legend S220*/
{ aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2 }, /* Legend S230*/ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT }, /* Legend S230*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier)*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado)*/
...@@ -144,10 +144,10 @@ static struct aac_driver_ident aac_drivers[] = { ...@@ -144,10 +144,10 @@ static struct aac_driver_ident aac_drivers[] = {
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec ", 2 }, /* (Marco)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec ", 2 }, /* (Marco)*/
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec ", 2 }, /* (Sebring)*/ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec ", 2 }, /* (Sebring)*/
{ aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2 }, /* Perc 320/DC*/ { aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT }, /* Perc 320/DC*/
{ aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4 }, /* Adaptec 5400S (Mustang)*/ { aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4 }, /* Adaptec 5400S (Mustang)*/
{ aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4 }, /* Adaptec 5400S (Mustang)*/ { aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4 }, /* Adaptec 5400S (Mustang)*/
{ aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4 }, /* Dell PERC2 "Quad Channel" */ { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_31BIT }, /* Dell PERC2 "Quad Channel" */
{ aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4 } /* HP NetRAID-4M */ { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4 } /* HP NetRAID-4M */
}; };
...@@ -407,7 +407,16 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, ...@@ -407,7 +407,16 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
if (pci_enable_device(pdev)) if (pci_enable_device(pdev))
goto out; goto out;
if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL)) if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) ||
pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL))
goto out;
/*
* If the quirk31 bit is set, the adapter needs adapter
* to driver communication memory to be allocated below 2gig
*/
if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
goto out; goto out;
pci_set_master(pdev); pci_set_master(pdev);
...@@ -443,6 +452,15 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, ...@@ -443,6 +452,15 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
if ((*aac_drivers[index].init)(aac , shost->unique_id)) if ((*aac_drivers[index].init)(aac , shost->unique_id))
goto out_free_fibs; goto out_free_fibs;
/*
* If we had set a smaller DMA mask earlier, set it to 4gig
* now since the adapter can dma data to at least a 4gig
* address space.
*/
if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL))
goto out_free_fibs;
aac_get_adapter_info(aac); aac_get_adapter_info(aac);
/* /*
......
drivers/scsi/aha1542.c
View file @ 65d24f11
...@@ -67,10 +67,10 @@ static void BAD_SG_DMA(Scsi_Cmnd * SCpnt, ...@@ -67,10 +67,10 @@ static void BAD_SG_DMA(Scsi_Cmnd * SCpnt,
int nseg, int nseg,
int badseg) int badseg)
{ {
printk(KERN_CRIT "sgpnt[%d:%d] page %p/0x%x length %u\n", printk(KERN_CRIT "sgpnt[%d:%d] page %p/0x%llx length %u\n",
badseg, nseg, badseg, nseg,
page_address(sgpnt[badseg].page) + sgpnt[badseg].offset, page_address(sgpnt[badseg].page) + sgpnt[badseg].offset,
SCSI_SG_PA(&sgpnt[badseg]), (unsigned long long)SCSI_SG_PA(&sgpnt[badseg]),
sgpnt[badseg].length); sgpnt[badseg].length);
/* /*
......
drivers/scsi/aic7xxx/Makefile
View file @ 65d24f11
# #
# Makefile for the Linux aic7xxx SCSI driver. # Makefile for the Linux aic7xxx SCSI driver.
# #
# $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Makefile#7 $ # $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Makefile#8 $
# #
# Let kbuild descend into aicasm when cleaning # Let kbuild descend into aicasm when cleaning
...@@ -61,6 +61,13 @@ aicasm-7xxx-opts-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT) := \ ...@@ -61,6 +61,13 @@ aicasm-7xxx-opts-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT) := \
-p $(obj)/aic7xxx_reg_print.c -i aic7xxx_osm.h -p $(obj)/aic7xxx_reg_print.c -i aic7xxx_osm.h
ifeq ($(CONFIG_AIC7XXX_BUILD_FIRMWARE),y) ifeq ($(CONFIG_AIC7XXX_BUILD_FIRMWARE),y)
# Create a dependency chain in generated files
# to avoid concurrent invocations of the single
# rule that builds them all.
aic7xxx_seq.h: aic7xxx_reg.h
ifeq ($(CONFIG_AIC7XXX_REG_PRETTY_PRINT),y)
aic7xxx_reg.h: aic7xxx_reg_print.c
endif
$(aic7xxx-gen-y): $(src)/aic7xxx.seq $(src)/aic7xxx.reg $(obj)/aicasm/aicasm $(aic7xxx-gen-y): $(src)/aic7xxx.seq $(src)/aic7xxx.reg $(obj)/aicasm/aicasm
$(obj)/aicasm/aicasm -I$(src) -r $(obj)/aic7xxx_reg.h \ $(obj)/aicasm/aicasm -I$(src) -r $(obj)/aic7xxx_reg.h \
$(aicasm-7xxx-opts-y) -o $(obj)/aic7xxx_seq.h \ $(aicasm-7xxx-opts-y) -o $(obj)/aic7xxx_seq.h \
...@@ -75,6 +82,13 @@ aicasm-79xx-opts-$(CONFIG_AIC79XX_REG_PRETTY_PRINT) := \ ...@@ -75,6 +82,13 @@ aicasm-79xx-opts-$(CONFIG_AIC79XX_REG_PRETTY_PRINT) := \
-p $(obj)/aic79xx_reg_print.c -i aic79xx_osm.h -p $(obj)/aic79xx_reg_print.c -i aic79xx_osm.h
ifeq ($(CONFIG_AIC79XX_BUILD_FIRMWARE),y) ifeq ($(CONFIG_AIC79XX_BUILD_FIRMWARE),y)
# Create a dependency chain in generated files
# to avoid concurrent invocations of the single
# rule that builds them all.
aic79xx_seq.h: aic79xx_reg.h
ifeq ($(CONFIG_AIC79XX_REG_PRETTY_PRINT),y)
aic79xx_reg.h: aic79xx_reg_print.c
endif
$(aic79xx-gen-y): $(src)/aic79xx.seq $(src)/aic79xx.reg $(obj)/aicasm/aicasm $(aic79xx-gen-y): $(src)/aic79xx.seq $(src)/aic79xx.reg $(obj)/aicasm/aicasm
$(obj)/aicasm/aicasm -I$(src) -r $(obj)/aic79xx_reg.h \ $(obj)/aicasm/aicasm -I$(src) -r $(obj)/aic79xx_reg.h \
$(aicasm-79xx-opts-y) -o $(obj)/aic79xx_seq.h \ $(aicasm-79xx-opts-y) -o $(obj)/aic79xx_seq.h \
......
drivers/scsi/aic7xxx/aicasm/Makefile
View file @ 65d24f11
...@@ -49,11 +49,19 @@ aicdb.h: ...@@ -49,11 +49,19 @@ aicdb.h:
clean: clean:
rm -f $(clean-files) rm -f $(clean-files)
# Create a dependency chain in generated files
# to avoid concurrent invocations of the single
# rule that builds them all.
aicasm_gram.c: aicasm_gram.h
aicasm_gram.c aicasm_gram.h: aicasm_gram.y aicasm_gram.c aicasm_gram.h: aicasm_gram.y
$(YACC) $(YFLAGS) -b $(<:.y=) $< $(YACC) $(YFLAGS) -b $(<:.y=) $<
mv $(<:.y=).tab.c $(<:.y=.c) mv $(<:.y=).tab.c $(<:.y=.c)
mv $(<:.y=).tab.h $(<:.y=.h) mv $(<:.y=).tab.h $(<:.y=.h)
# Create a dependency chain in generated files
# to avoid concurrent invocations of the single
# rule that builds them all.
aicasm_macro_gram.c: aicasm_macro_gram.h
aicasm_macro_gram.c aicasm_macro_gram.h: aicasm_macro_gram.y aicasm_macro_gram.c aicasm_macro_gram.h: aicasm_macro_gram.y
$(YACC) $(YFLAGS) -b $(<:.y=) -p mm $< $(YACC) $(YFLAGS) -b $(<:.y=) -p mm $<
mv $(<:.y=).tab.c $(<:.y=.c) mv $(<:.y=).tab.c $(<:.y=.c)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7