usb: musb: Ensure rx reinit occurs for shared_fifo endpoints

commit f3eec0cf upstream.

shared_fifo endpoints would only get a previous tx state cleared
out, the rx state was only cleared for non shared_fifo endpoints
Change this so that the rx state is cleared for all endpoints.
This addresses an issue that resulted in rx packets being dropped
silently.
Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drivers/usb/musb/musb_host.c

@@ -581,14 +581,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 		musb_writew(ep->regs, MUSB_TXCSR, 0);
 
 	/* scrub all previous state, clearing toggle */
-	} else {
+	}
 	csr = musb_readw(ep->regs, MUSB_RXCSR);
 	if (csr & MUSB_RXCSR_RXPKTRDY)
 		WARNING("rx%d, packet/%d ready?\n", ep->epnum,
 			musb_readw(ep->regs, MUSB_RXCOUNT));
 
 	musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
-	}
 
 	/* target addr and (for multipoint) hub addr/port */
 	if (musb->is_multipoint) {