Merge http://linux.bkbits.net/linux-2.5

into debian.org:/usr/src/kernel/ieee1394-2.6

Documentation/DocBook/kernel-locking.tmpl

@@ -1444,27 +1444,6 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
     </para>
    </sect1>
 
-   <sect1 id="sparc">
-    <title>The Fucked Up Sparc</title>
-
-    <para>
-      Alan Cox says <quote>the irq disable/enable is in the register
-      window on a sparc</quote>.  Andi Kleen says <quote>when you do
-      restore_flags in a different function you mess up all the
-      register windows</quote>.
-    </para>
-
-    <para>
-      So never pass the flags word set by
-      <function>spin_lock_irqsave()</function> and brethren to another
-      function (unless it's declared <type>inline</type>).  Usually no-one
-      does this, but now you've been warned.  Dave Miller can never do
-      anything in a straightforward manner (I can say that, because I have
-      pictures of him and a certain PowerPC maintainer in a compromising
-      position).
-    </para>
-   </sect1>
-
   </chapter>
 
  <chapter id="Efficiency">

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 3
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc4
 NAME=Feisty Dunnart
 
 # *DOCUMENTATION*

arch/alpha/kernel/core_apecs.c

@@ -10,20 +10,18 @@
  * Code common to all APECS core logic chips.
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 
-#include <asm/system.h>
 #include <asm/ptrace.h>
 #include <asm/smp.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_cia.c

@@ -11,23 +11,19 @@
  * Code common to all CIA core logic chips.
  */
 
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/ptrace.h>
-#include <asm/hwrpb.h>
-
 #define __EXTERN_INLINE inline
 #include <asm/io.h>
 #include <asm/core_cia.h>
 #undef __EXTERN_INLINE
 
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
 #include <linux/bootmem.h>
 
+#include <asm/ptrace.h>
+
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_irongate.c

@@ -9,27 +9,23 @@
  * Code common to all IRONGATE core logic chips.
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_irongate.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/initrd.h>
+#include <linux/bootmem.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/pci.h>
-#include <asm/hwrpb.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_irongate.h>
-#undef __EXTERN_INLINE
-
-#include <linux/bootmem.h>
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_lca.c

@@ -8,21 +8,19 @@
  * Code common to all LCA core logic chips.
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_lca.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/tty.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/smp.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_marvel.c

@@ -4,14 +4,11 @@
  * Code common to all Marvel based systems.
  */
 
-#include <linux/config.h>
-
 #define __EXTERN_INLINE inline
 #include <asm/io.h>
 #include <asm/core_marvel.h>
 #undef __EXTERN_INLINE
 
-#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
@@ -20,18 +17,15 @@
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
 #include <linux/module.h>
+#include <linux/bootmem.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/smp.h>
-#include <asm/hwrpb.h>
 #include <asm/gct.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/rtc.h>
 
-#include <linux/bootmem.h>
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_mcpcia.c

@@ -6,7 +6,11 @@
  * Code common to all MCbus-PCI Adaptor core logic chipsets
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_mcpcia.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
@@ -14,13 +18,6 @@
 #include <linux/delay.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/hwrpb.h>
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_mcpcia.h>
-#undef __EXTERN_INLINE
 
 #include "proto.h"
 #include "pci_impl.h"

arch/alpha/kernel/core_polaris.c

@@ -4,20 +4,18 @@
  * POLARIS chip-specific code
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_polaris.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 
-#include <asm/system.h>
 #include <asm/ptrace.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_polaris.h>
-#undef __EXTERN_INLINE
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_t2.c

@@ -9,21 +9,19 @@
  * Code common to all T2 core logic chips.
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/core_t2.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/delay.h>
 
-#define __EXTERN_INLINE
-#include <asm/io.h>
-#include <asm/core_t2.h>
-#undef __EXTERN_INLINE
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_titan.c

@@ -4,29 +4,24 @@
  * Code common to all TITAN core logic chips.
  */
 
-#include <linux/config.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_titan.h>
+#undef __EXTERN_INLINE
+
 #include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/vmalloc.h>
+#include <linux/bootmem.h>
 
-#include <asm/hwrpb.h>
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/smp.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_titan.h>
-#undef __EXTERN_INLINE
-
-#include <linux/bootmem.h>
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_tsunami.c

@@ -6,23 +6,20 @@
  * Code common to all TSUNAMI core logic chips.
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_tsunami.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/init.h>
+#include <linux/bootmem.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/smp.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_tsunami.h>
-#undef __EXTERN_INLINE
-
-#include <linux/bootmem.h>
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/alpha/kernel/core_wildfire.c

@@ -6,21 +6,19 @@
  *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
  */
 
-#include <linux/kernel.h>
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_wildfire.h>
+#undef __EXTERN_INLINE
+
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 
 #include <asm/ptrace.h>
-#include <asm/system.h>
 #include <asm/smp.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_wildfire.h>
-#undef __EXTERN_INLINE
-
 #include "proto.h"
 #include "pci_impl.h"
 

arch/arm/common/amba.c

@@ -50,7 +50,7 @@ static int amba_hotplug(struct device *dev, char **envp, int nr_env, char *buf,
 	if (nr_env < 2)
 		return -ENOMEM;
 
-	snprintf(buf, bufsz, "AMBA_ID=%08lx", pcdev->periphid);
+	snprintf(buf, bufsz, "AMBA_ID=%08x", pcdev->periphid);
 	*envp++ = buf;
 	*envp++ = NULL;
 	return 0;

arch/arm/kernel/time.c

@@ -72,8 +72,10 @@ unsigned long (*gettimeoffset)(void) = dummy_gettimeoffset;
 
 /*
  * Scheduler clock - returns current time in nanosec units.
+ * This is the default implementation.  Sub-architecture
+ * implementations can override this.
  */
-unsigned long long sched_clock(void)
+unsigned long long __attribute__((weak)) sched_clock(void)
 {
 	return (unsigned long long)jiffies * (1000000000 / HZ);
 }
@@ -114,7 +116,7 @@ static inline void do_set_rtc(void)
 		return;
 
 	if (next_rtc_update &&
-	    time_before(xtime.tv_sec, next_rtc_update))
+	    time_before((unsigned long)xtime.tv_sec, next_rtc_update))
 		return;
 
 	if (xtime.tv_nsec < 500000000 - ((unsigned) tick_nsec >> 1) &&

arch/arm/mach-sa1100/generic.c

@@ -159,9 +159,14 @@ static struct resource sa11x0mcp_resources[] = {
 	},
 };
 
+static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
+
 static struct platform_device sa11x0mcp_device = {
 	.name		= "sa11x0-mcp",
 	.id		= 0,
+	.dev = {
+		.dma_mask = &sa11x0mcp_dma_mask,
+	},
 	.num_resources	= ARRAY_SIZE(sa11x0mcp_resources),
 	.resource	= sa11x0mcp_resources,
 };

arch/arm/mm/Kconfig

@@ -291,8 +291,8 @@ config ARM_THUMB
 	depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE
 	default y
 	help
-	  Say Y if you want to have kernel support for ARM Thumb instructions,
-	  fault handlers, and system calls.
+	  Say Y if you want to include kernel support for running user space
+	  Thumb binaries.
 
 	  The Thumb instruction set is a compressed form of the standard ARM
 	  instruction set resulting in smaller binaries at the expense of

arch/i386/Kconfig

@@ -701,7 +701,7 @@ config X86_PAE
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation Support"
-	depends on SMP && HIGHMEM64G && (X86_PC || X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI && !ACPI_HT_ONLY))
+	depends on SMP && HIGHMEM64G && (X86_PC || X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI))
 	default n if X86_PC
 	default y if (X86_NUMAQ || X86_SUMMIT)
 
@@ -709,8 +709,8 @@ config NUMA
 comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
 	depends on X86_NUMAQ && (!HIGHMEM64G || !SMP)
 
-comment "NUMA (Summit) requires SMP, 64GB highmem support, full ACPI"
-	depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI || ACPI_HT_ONLY)
+comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
+	depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
 
 config DISCONTIGMEM
 	bool

arch/i386/kernel/acpi/boot.c

@@ -141,6 +141,10 @@ acpi_parse_lapic (
 
 	acpi_table_print_madt_entry(header);
 
+	/* no utility in registering a disabled processor */
+	if (processor->flags.enabled == 0)
+		return 0;
+
 	mp_register_lapic (
 		processor->id,					   /* APIC ID */
 		processor->flags.enabled);			  /* Enabled? */

arch/i386/kernel/mpparse.c

@@ -634,7 +634,7 @@ void __init get_smp_config (void)
 
 	/*
 	 * ACPI may be used to obtain the entire SMP configuration or just to 
-	 * enumerate/configure processors (CONFIG_ACPI_HT).  Note that 
+	 * enumerate/configure processors (CONFIG_ACPI_BOOT).  Note that 
 	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
 	 * processors, where MPS only supports physical.
 	 */
@@ -940,7 +940,7 @@ void __init mp_override_legacy_irq (
 	 *      erroneously sets the trigger to level, resulting in a HUGE 
 	 *      increase of timer interrupts!
 	 */
-	if ((bus_irq == 0) && (global_irq == 2) && (trigger == 3))
+	if ((bus_irq == 0) && (trigger == 3))
 		trigger = 1;
 
 	intsrc.mpc_type = MP_INTSRC;
@@ -961,7 +961,7 @@ void __init mp_override_legacy_irq (
 	 * Otherwise create a new entry (e.g. global_irq == 2).
 	 */
 	for (i = 0; i < mp_irq_entries; i++) {
-		if ((mp_irqs[i].mpc_dstapic == intsrc.mpc_dstapic) 
+		if ((mp_irqs[i].mpc_srcbus == intsrc.mpc_srcbus) 
 			&& (mp_irqs[i].mpc_srcbusirq == intsrc.mpc_srcbusirq)) {
 			mp_irqs[i] = intsrc;
 			found = 1;
@@ -1008,9 +1008,10 @@ void __init mp_config_acpi_legacy_irqs (void)
 	 */
 	for (i = 0; i < 16; i++) {
 
-		if (i == 2) continue;			/* Don't connect IRQ2 */
+		if (i == 2)
+			continue;			/* Don't connect IRQ2 */
 
-		intsrc.mpc_irqtype = i ? mp_INT : mp_ExtINT;   /* 8259A to #0 */
+		intsrc.mpc_irqtype = mp_INT;
 		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */
 		intsrc.mpc_dstirq = i;
 

arch/ia64/kernel/acpi.c

@@ -589,7 +589,7 @@ acpi_boot_init (void)
 	smp_boot_data.cpu_count = available_cpus;
 
 	smp_build_cpu_map();
-# ifdef CONFIG_NUMA
+# ifdef CONFIG_ACPI_NUMA
 	if (srat_num_cpus == 0) {
 		int cpu, i = 1;
 		for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)

arch/ia64/kernel/irq.c

@@ -465,8 +465,6 @@ unsigned int do_IRQ(unsigned long irq, struct pt_regs *regs)
 		desc->handler->ack(irq);
 		action_ret = handle_IRQ_event(irq, regs, desc->action);
 		desc->handler->end(irq);
-		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret);
 	} else {
 		spin_lock(&desc->lock);
 		desc->handler->ack(irq);

arch/ia64/kernel/mca.c

@@ -239,10 +239,9 @@ ia64_log_get(int sal_info_type, u8 **buffer, int irq_safe)
  *  and wakes up any processes waiting for error records.
  *
  *  Inputs  :   sal_info_type   (Type of error record MCA/CMC/CPE/INIT)
- *  		called_from_init (1 for boot processing)
  */
 static void
-ia64_mca_log_sal_error_record(int sal_info_type, int called_from_init)
+ia64_mca_log_sal_error_record(int sal_info_type)
 {
 	u8 *buffer;
 	u64 size;
@@ -255,7 +254,7 @@ ia64_mca_log_sal_error_record(int sal_info_type, int called_from_init)
 
 	salinfo_log_wakeup(sal_info_type, buffer, size, irq_safe);
 
-	if (irq_safe || called_from_init)
+	if (irq_safe)
 		printk(KERN_INFO "CPU %d: SAL log contains %s error record\n",
 			smp_processor_id(),
 			sal_info_type < ARRAY_SIZE(rec_name) ? rec_name[sal_info_type] : "UNKNOWN");
@@ -280,7 +279,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs)
 	local_irq_enable();
 
 	/* Get the CMC error record and log it */
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE, 0);
+	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
 	return IRQ_HANDLED;
 }
 
@@ -469,32 +468,6 @@ init_handler_platform (pal_min_state_area_t *ms,
 	while (1);			/* hang city if no debugger */
 }
 
-/*
- *  ia64_mca_check_errors
- *
- *  External entry to check for error records which may have been posted by SAL
- *  for a prior failure which resulted in a machine shutdown before an the
- *  error could be logged.  This function must be called after the filesystem
- *  is initialized.
- *
- *  Inputs  :   None
- *
- *  Outputs :   None
- */
-int
-ia64_mca_check_errors (void)
-{
-	/*
-	 *  If there is an MCA error record pending, get it and log it.
-	 */
-	printk(KERN_INFO "CPU %d: checking for saved MCA error records\n", smp_processor_id());
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 1);
-
-	return 0;
-}
-
-device_initcall(ia64_mca_check_errors);
-
 #ifdef CONFIG_ACPI
 /*
  * ia64_mca_register_cpev
@@ -831,7 +804,7 @@ ia64_mca_ucmc_handler(void)
 	int recover = psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc);
 
 	/* Get the MCA error record and log it */
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA, 0);
+	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
 
 	/*
 	 *  Wakeup all the processors which are spinning in the rendezvous
@@ -875,7 +848,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
 	local_irq_enable();
 
 	/* Get the CMC error record and log it */
-	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC, 0);
+	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
 
 	spin_lock(&cmc_history_lock);
 	if (!cmc_polling_enabled) {

arch/ia64/kernel/smp.c

@@ -18,10 +18,6 @@
  * 10/13/00 Goutham Rao <goutham.rao@intel.com> Updated smp_call_function and
  *		smp_call_function_single to resend IPI on timeouts
  */
-#define __KERNEL_SYSCALLS__
-
-#include <linux/config.h>
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>

arch/ia64/kernel/smpboot.c

@@ -10,10 +10,6 @@
  *						smp_boot_cpus()/smp_commence() is replaced by
  *						smp_prepare_cpus()/__cpu_up()/smp_cpus_done().
  */
-
-
-#define __KERNEL_SYSCALLS__
-
 #include <linux/config.h>
 
 #include <linux/module.h>
@@ -306,7 +302,6 @@ smp_callin (void)
 
 #ifdef CONFIG_IA64_MCA
 	ia64_mca_cmc_vector_setup();	/* Setup vector on AP & enable */
-	ia64_mca_check_errors();	/* For post-failure MCA error logging */
 #endif
 
 #ifdef CONFIG_PERFMON

arch/ia64/scripts/toolchain-flags

@@ -5,9 +5,14 @@
 CPPFLAGS=""
 CC=$1
 OBJDUMP=$2
+READELF=$3
 dir=$(dirname $0)
 tmp=${TMPDIR:-/tmp}
 out=$tmp/out$$
+
+# Check whether cross-segment segment-relative relocs work fine.  We need
+# that for building the gate DSO:
+
 $CC -nostdlib -static -Wl,-T$dir/check-segrel.lds $dir/check-segrel.S -o $out
 res=$($OBJDUMP --full --section .rodata $out | fgrep 000 | cut -f3 -d' ')
 rm -f $out
@@ -20,6 +25,16 @@ warning: your linker cannot handle cross-segment segment-relative relocations.
 EOF
 fi
 
+# Check whether .align inside a function works as expected.
+
+$CC -c $dir/check-text-align.S -o $out
+$READELF -u $out | fgrep -q 'prologue(rlen=12)'
+res=$?
+rm -f $out
+if [ $res -eq 0 ]; then
+    CPPFLAGS="$CPPFLAGS -DHAVE_WORKING_TEXT_ALIGN"
+fi
+
 if ! $CC -c $dir/check-model.c -o $out 2>&1 | grep  __model__ | grep -q attrib
 then
     CPPFLAGS="$CPPFLAGS -DHAVE_MODEL_SMALL_ATTRIBUTE"

arch/ia64/sn/kernel/setup.c

@@ -71,6 +71,8 @@ u64 sn_partition_serial_number;
 
 short physical_node_map[MAX_PHYSNODE_ID];
 
+EXPORT_SYMBOL(physical_node_map);
+
 int	numionodes;
 /*
  * This is the address of the RRegs in the HSpace of the global

arch/ia64/sn/kernel/sn2/cache.c

@@ -6,7 +6,7 @@
  * Copyright (C) 2001-2003 Silicon Graphics, Inc. All rights reserved.
  *
  */
-
+#include <linux/module.h>
 #include <asm/pgalloc.h>
 
 /**

arch/ppc/8260_io/uart.c

@@ -5,6 +5,9 @@
  *	2.3.99 updates
  *  Copyright (c) 2002 Allen Curtis, Ones and Zeros, Inc. (acurtis@onz.com)
  *	2.5.50 updates
+ *  Fix the console driver to be registered with initcalls and some minor fixup
+ *  for 2.6.2, by Petter Larsen, moreCom as (petter.larsen@morecom.no) and
+ *  Miguel Valero, AxxessIT ASA (miguel.valero@axxessit.no)
  *
  * I used the 8xx uart.c driver as the framework for this driver.
  * The original code was written for the EST8260 board.  I tried to make
@@ -75,11 +78,11 @@ static char *serial_name = "CPM UART driver";
 static char *serial_version = "0.02";
 
 static struct tty_driver *serial_driver;
-static int serial_console_setup(struct console *co, char *options);
-
+static int __init serial_console_setup( struct console *co, char *options);
 static void serial_console_write(struct console *c, const char *s,
 		                                unsigned count);
-static kdev_t serial_console_device(struct console *c);
+
+static struct tty_driver *serial_console_device(struct console *c, int *index);
 
 #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 static unsigned long break_pressed; /* break, really ... */
@@ -533,8 +536,6 @@ static _INLINE_ void receive_break(ser_info_t *info, struct pt_regs *regs)
 	*(tty->flip.flag_buf_ptr++) = TTY_BREAK;
 	*(tty->flip.char_buf_ptr++) = 0;
 	tty->flip.count++;
-
-	queue_task(&tty->flip.tqueue, &tq_timer);
 }
 
 
@@ -1864,8 +1865,8 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 {
 #ifdef DO_THIS_LATER
 	DECLARE_WAITQUEUE(wait, current);
-#endif
 	struct serial_state *state = info->state;
+#endif
 	int		retval;
 	int		do_clocal = 0;
 
@@ -2467,12 +2468,14 @@ static struct tty_driver *serial_console_device(struct console *c, int *index)
 /*
  *	Register console.
  */
-long __init console_8xx_init(long kmem_start, long kmem_end)
+static int __init console_8xx_init(void)
 {
 	register_console(&sercons);
-	return kmem_start;
+	return 0;
 }
 
+console_initcall(console_8xx_init);
+
 #endif
 
 /* Default console baud rate as determined by the board information
@@ -2879,8 +2882,10 @@ static int __init serial_console_setup(struct console *co, char *options)
 	volatile	smc_t		*sp;
 	volatile	smc_uart_t	*up;
 #endif
+#ifdef SCC_CONSOLE
 	volatile	scc_t		*scp;
 	volatile	scc_uart_t	*sup;
+#endif
 	volatile	iop8260_t	*io;
 	bd_t				*bd;
 

arch/ppc/Kconfig

@@ -609,7 +609,7 @@ config PPC_OF
 
 config PPC_GEN550
 	bool
-	depends on SANDPOINT || MCPN765
+	depends on SANDPOINT || MCPN765 || SPRUCE
 	default y
 
 config FORCE

arch/ppc/boot/common/bootinfo.c

+/*
+ * arch/ppc/common/bootinfo.c
+ *
+ * General bootinfo record utilities
+ * Author: Randy Vinson <rvinson@mvista.com>
+ *
+ * 2002 (c) MontaVista Software, Inc. This file is licensed under the terms
+ * of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/bootinfo.h>
+
+#include "nonstdio.h"
+
+static struct bi_record * birec = NULL;
+
+static struct bi_record *
+__bootinfo_build(struct bi_record *rec, unsigned long tag, unsigned long size,
+		 void *data)
+{
+	/* set the tag */
+	rec->tag = tag;
+
+	/* if the caller has any data, copy it */
+	if (size)
+		memcpy(rec->data, (char *)data, size);
+
+	/* set the record size */
+	rec->size = sizeof(struct bi_record) + size;
+
+	/* advance to the next available space */
+	rec = (struct bi_record *)((unsigned long)rec + rec->size);
+
+	return rec;
+}
+
+void
+bootinfo_init(struct bi_record *rec)
+{
+
+	/* save start of birec area */
+	birec = rec;
+
+	/* create an empty list */
+	rec = __bootinfo_build(rec, BI_FIRST, 0, NULL);
+	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
+
+}
+
+void
+bootinfo_append(unsigned long tag, unsigned long size, void * data)
+{
+
+	struct bi_record *rec = birec;
+
+	/* paranoia */
+	if ((rec == NULL) || (rec->tag != BI_FIRST))
+		return;
+
+	/* find the last entry in the list */
+	while (rec->tag != BI_LAST)
+		rec = (struct bi_record *)((ulong)rec + rec->size);
+
+	/* overlay BI_LAST record with new one and tag on a new BI_LAST */
+	rec = __bootinfo_build(rec, tag, size, data);
+	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
+}

arch/ppc/boot/simple/Makefile

@@ -30,7 +30,7 @@ tftpboot			:= /tftpboot
 
 # Normally, we use the 'misc.c' file for decompress_kernel and
 # whatnot.  Sometimes we need to override this however.
-misc-y	:= misc.o
+misc-y	:= misc.o ../common/bootinfo.o
 
 # Normally, we have our images end in .elf, but something we want to
 # change this.
@@ -103,7 +103,7 @@ zimageinitrd-$(pcore)			:= zImage.initrd-STRIPELF
 zimageinitrd-$(CONFIG_SPRUCE)		:= zImage.initrd-TREE
          end-$(CONFIG_SPRUCE)		:= spruce
   entrypoint-$(CONFIG_SPRUCE)		:= 0x00800000
-        misc-$(CONFIG_SPRUCE)		:= misc-spruce.o
+        misc-$(CONFIG_SPRUCE)		+= misc-spruce.o
 
 # SMP images should have a '.smp' suffix.
          end-$(CONFIG_SMP)		+= .smp

arch/ppc/boot/simple/misc-spruce.c

@@ -15,55 +15,19 @@
  */
 
 #include <linux/types.h>
-#include <linux/elf.h>
 #include <linux/config.h>
 #include <linux/pci.h>
 
-#include <asm/page.h>
-#include <asm/mmu.h>
 #include <asm/bootinfo.h>
 
-#include "zlib.h"
+extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
+				       unsigned long cksum);
 
 /* Define some important locations of the Spruce. */
 #define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
 #define SPRUCE_PCI_CONFIG_DATA	0xfec00004
 #define SPRUCE_ISA_IO_BASE	0xf8000000
 
-unsigned long com_port;
-
-char *avail_ram;
-char *end_avail;
-
-/* The linker tells us where the image is. */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-
-#ifdef CONFIG_CMDLINE
-#define CMDLINE CONFIG_CMDLINE
-#else
-#define CMDLINE ""
-#endif
-char cmd_preset[] = CMDLINE;
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-
-unsigned long initrd_size = 0;
-
-char *zimage_start;
-int zimage_size;
-
-extern void udelay(long);
-extern void puts(const char *);
-extern void putc(const char c);
-extern void puthex(unsigned long val);
-extern int getc(void);
-extern int tstc(void);
-extern void gunzip(void *, int, unsigned char *, int *);
-
-extern unsigned long serial_init(int chan, void *ignored);
-
 /* PCI configuration space access routines. */
 unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR;
 unsigned char *pci_config_data   = (unsigned char *)SPRUCE_PCI_CONFIG_DATA;
@@ -146,45 +110,16 @@ unsigned long isa_io_base = SPRUCE_ISA_IO_BASE;
 #define MEM_B2EA	0x60
 
 unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
+get_mem_size(void)
 {
-	int timer = 0;
-	char *cp, ch;
-
 	int loop;
-	int csr0;
-	int csr_id;
-	int *mem_addr = (int *)0xff500008;
-	int *mem_data = (int *)0xff50000c;
-	int mem_size = 0;
+	unsigned long mem_size = 0;
 	unsigned long mem_mben;
 	unsigned long mem_type;
 	unsigned long mem_start;
 	unsigned long mem_end;
-	int *pif_addr = (int *)0xff500000;
-	int *pif_data = (int *)0xff500004;
-	int pci_devfn;
-	int found_multi = 0;
-	unsigned short vendor;
-	unsigned short device;
-	unsigned short command;
-	unsigned char header_type;
-	unsigned int bar0;
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/* Initialize the serial console port */
-	com_port = serial_init(0, NULL);
-#endif
-
-	/*
-	 * Gah, these firmware guys need to learn that hardware
-	 * byte swapping is evil! Disable all hardware byte
-	 * swapping so it doesn't hurt anyone.
-	 */
-	*pif_addr = PLBMIFOPT;
-	asm("sync");
-	*pif_data = 0x00000000;
-	asm("sync");
+	volatile int *mem_addr = (int *)0xff500008;
+	volatile int *mem_data = (int *)0xff50000c;
 
 	/* Get the size of memory from the memory controller. */
 	*mem_addr = MEM_MBEN;
@@ -235,6 +170,33 @@ load_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 
 		mem_size += mem_end - mem_start + 0x100000;
 	}
+	return mem_size;
+}
+
+unsigned long
+load_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
+{
+	int csr0;
+	int csr_id;
+	int pci_devfn;
+	int found_multi = 0;
+	unsigned short vendor;
+	unsigned short device;
+	unsigned short command;
+	unsigned char header_type;
+	unsigned int bar0;
+	volatile int *pif_addr = (int *)0xff500000;
+	volatile int *pif_data = (int *)0xff500004;
+
+	/*
+	 * Gah, these firmware guys need to learn that hardware
+	 * byte swapping is evil! Disable all hardware byte
+	 * swapping so it doesn't hurt anyone.
+	 */
+	*pif_addr = PLBMIFOPT;
+	asm("sync");
+	*pif_data = 0x00000000;
+	asm("sync");
 
 	/* Search out and turn off the PcNet ethernet boot device. */
 	for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) {
@@ -310,134 +272,5 @@ load_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 		}
 	}
 
-	/* assume the chunk below 8M is free */
-	end_avail = (char *)0x00800000;
-
-	/*
-	 * We link ourself to 0x00800000.  When we run, we relocate
-	 * ourselves there.  So we just need __image_begin for the
-	 * start. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-	avail_ram = (char *)0x00400000;
-	end_avail = (char *)0x00800000;
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-
-	/* Display standard Linux/PPC boot prompt for kernel args */
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	memcpy (cmd_line, cmd_preset, sizeof(cmd_preset));
-	while ( *cp ) putc(*cp++);
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				if (ch == '\b') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-	puts("\n");
-
-	puts("Uncompressing Linux...");
-
-	gunzip(0, 0x400000, zimage_start, &zimage_size);
-
-	puts("done.\n");
-
-	{
-		struct bi_record *rec;
-		unsigned long initrd_loc;
-		unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) +
-				(1 << 20) - 1, (1 << 20));
-		rec = (struct bi_record *)rec_loc;
-
-		/* We need to make sure that the initrd and bi_recs do not
-		 * overlap. */
-		if ( initrd_size ) {
-			initrd_loc = (unsigned long)(&__ramdisk_begin);
-			/* If the bi_recs are in the middle of the current
-			 * initrd, move the initrd to the next MB
-			 * boundary. */
-			if ((rec_loc > initrd_loc) &&
-					((initrd_loc + initrd_size)
-					 > rec_loc)) {
-				initrd_loc = _ALIGN((unsigned long)(zimage_size)
-						+ (2 << 20) - 1, (2 << 20));
-			 	memmove((void *)initrd_loc, &__ramdisk_begin,
-					 initrd_size);
-		         	puts("initrd moved:  "); puthex(initrd_loc);
-			 	puts(" "); puthex(initrd_loc + initrd_size);
-			 	puts("\n");
-			}
-		}
-
-		rec->tag = BI_FIRST;
-        	rec->size = sizeof(struct bi_record);
-        	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-        	rec->tag = BI_BOOTLOADER_ID;
-        	memcpy( (void *)rec->data, "spruceboot", 11);
-        	rec->size = sizeof(struct bi_record) + 10 + 1;
-        	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-        	rec->tag = BI_MEMSIZE;
-        	rec->data[0] = mem_size;
-        	rec->size = sizeof(struct bi_record) + sizeof(unsigned long);
-        	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-        	rec->tag = BI_CMD_LINE;
-        	memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
-        	rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
-        	rec = (struct bi_record *)((ulong)rec + rec->size);
-
-		if ( initrd_size ) {
-			rec->tag = BI_INITRD;
-			rec->data[0] = initrd_loc;
-			rec->data[1] = initrd_size;
-			rec->size = sizeof(struct bi_record) + 2 *
-				sizeof(unsigned long);
-			rec = (struct bi_record *)((unsigned long)rec +
-					rec->size);
-		}
-
-        	rec->tag = BI_LAST;
-        	rec->size = sizeof(struct bi_record);
-        	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-	}
-
-	puts("Now booting the kernel\n");
-
-	return 0;
+	return decompress_kernel(load_addr, num_words, cksum);
 }

arch/ppc/boot/simple/misc.c

 /*
- * arch/ppc/common/misc-simple.c
+ * arch/ppc/simple/misc.c
  *
  * Misc. bootloader code for many machines.  This assumes you have are using
  * a 6xx/7xx/74xx CPU in your machine.  This assumes the chunk of memory
@@ -46,6 +46,15 @@
 #define HAS_KEYB 0
 #endif
 
+/* Will / Can the user give input?
+ * Val Henson has requested that Gemini doesn't wait for the
+ * user to edit the cmdline or not.
+ */
+#if (defined(CONFIG_SERIAL_8250_CONSOLE) || defined(CONFIG_VGA_CONSOLE)) \
+	&& !defined(CONFIG_GEMINI)
+#define INTERACTIVE_CONSOLE	1
+#endif
+
 char *avail_ram;
 char *end_avail;
 char *zimage_start;
@@ -66,19 +75,28 @@ extern char _end[];
 extern unsigned long start;
 
 extern int CRT_tstc(void);
-extern unsigned long get_mem_size(void);
 extern unsigned long serial_init(int chan, void *ignored);
 extern void serial_close(unsigned long com_port);
 extern void gunzip(void *, int, unsigned char *, int *);
 extern void serial_fixups(void);
 
+/* Allow get_mem_size to be hooked into.  This is the default. */
+unsigned long __attribute__ ((weak))
+get_mem_size(void)
+{
+	return 0;
+}
+
 struct bi_record *
 decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 {
+#ifdef INTERACTIVE_CONSOLE
 	int timer = 0;
-	char *cp, ch;
+	char ch;
+#endif
+	char *cp;
 	struct bi_record *rec;
-	unsigned long TotalMemory = 0, rec_loc, initrd_loc;
+	unsigned long initrd_loc, TotalMemory = 0;
 
 	serial_fixups();
 	com_port = serial_init(0, NULL);
@@ -93,13 +111,11 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 	__asm__ __volatile__("eieio");
 #endif
 
-#if defined(CONFIG_LOPEC) || defined(CONFIG_PAL4)
 	/*
 	 * Call get_mem_size(), which is memory controller dependent,
 	 * and we must have the correct file linked in here.
 	 */
 	TotalMemory = get_mem_size();
-#endif
 
 	/* assume the chunk below 8M is free */
 	end_avail = (char *)0x00800000;
@@ -170,9 +186,11 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 	memcpy (cmd_line, cmd_preset, sizeof(cmd_preset));
 	while ( *cp ) putc(*cp++);
 
-#ifndef CONFIG_GEMINI
-	/* Val Henson has requested that Gemini doesn't wait for the
-	 * user to edit the cmdline or not. */
+#ifdef INTERACTIVE_CONSOLE
+	/*
+	 * If they have a console, allow them to edit the command line.
+	 * Otherwise, don't bother wasting the five seconds.
+	 */
 	while (timer++ < 5*1000) {
 		if (tstc()) {
 			while ((ch = getc()) != '\n' && ch != '\r') {
@@ -205,16 +223,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 	gunzip(0, 0x400000, zimage_start, &zimage_size);
 	puts("done.\n");
 
-	/*
-	 * Create bi_recs for cmd_line and initrds
-	 */
-	rec_loc = _ALIGN((unsigned long)(zimage_size) +
-			(1 << 20) - 1, (1 << 20));
-	rec = (struct bi_record *)rec_loc;
+	/* get the bi_rec address */
+	rec = bootinfo_addr(zimage_size);
 
 	/* We need to make sure that the initrd and bi_recs do not
 	 * overlap. */
 	if ( initrd_size ) {
+		unsigned long rec_loc = (unsigned long) rec;
 		initrd_loc = (unsigned long)(&__ramdisk_begin);
 		/* If the bi_recs are in the middle of the current
 		 * initrd, move the initrd to the next MB
@@ -231,39 +246,25 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 		}
 	}
 
-	rec->tag = BI_FIRST;
-	rec->size = sizeof(struct bi_record);
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
+	bootinfo_init(rec);
+	if ( TotalMemory )
+		bootinfo_append(BI_MEMSIZE, sizeof(int), (void*)&TotalMemory);
 
-	if ( TotalMemory ) {
-		rec->tag = BI_MEMSIZE;
-		rec->data[0] = TotalMemory;
-		rec->size = sizeof(struct bi_record) + sizeof(unsigned long);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-	}
+	bootinfo_append(BI_CMD_LINE, strlen(cmd_line)+1, (void*)cmd_line);
 
-	rec->tag = BI_CMD_LINE;
-	memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
-	rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
+	/* add a bi_rec for the initrd if it exists */
+	if (initrd_size) {
+		unsigned long initrd[2];
 
-	if ( initrd_size ) {
-		rec->tag = BI_INITRD;
-		rec->data[0] = initrd_loc;
-		rec->data[1] = initrd_size;
-		rec->size = sizeof(struct bi_record) + 2 *
-			sizeof(unsigned long);
-		rec = (struct bi_record *)((unsigned long)rec +
-				rec->size);
-	}
+		initrd[0] = initrd_loc;
+		initrd[1] = initrd_size;
 
-	rec->tag = BI_LAST;
-	rec->size = sizeof(struct bi_record);
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
+		bootinfo_append(BI_INITRD, sizeof(initrd), &initrd);
+	}
 	puts("Now booting the kernel\n");
 	serial_close(com_port);
 
-	return (struct bi_record *)rec_loc;
+	return rec;
 }
 
 /* Allow decompress_kernel to be hooked into.  This is the default. */

arch/ppc/configs/spruce_defconfig

@@ -4,11 +4,17 @@
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
@@ -18,9 +24,15 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_EMBEDDED is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 
 #
 # Loadable module support
@@ -33,24 +45,25 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 
 #
-# Platform support
+# Processor
 #
-CONFIG_PPC=y
-CONFIG_PPC32=y
 CONFIG_6xx=y
 # CONFIG_40x is not set
+# CONFIG_44x is not set
 # CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+# CONFIG_ALTIVEC is not set
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
 
 #
-# IBM 4xx options
+# Platform options
 #
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
 # CONFIG_PPC_MULTIPLATFORM is not set
 # CONFIG_APUS is not set
-# CONFIG_WILLOW_2 is not set
+# CONFIG_WILLOW is not set
 # CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
 # CONFIG_EV64260 is not set
@@ -66,35 +79,31 @@ CONFIG_SPRUCE=y
 # CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
-# CONFIG_SPRUCE_BAUD_33M is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX6 is not set
+# CONFIG_TQM8260 is not set
+CONFIG_PPC_GEN550=y
+CONFIG_SPRUCE_BAUD_33M=y
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_KERNEL_ELF=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
 
 #
-# General setup
+# Bus options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_NAMES is not set
 # CONFIG_HOTPLUG is not set
 
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
 #
 # Advanced setup
 #
@@ -109,15 +118,27 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_BOOT_LOAD=0x00800000
 
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+
 #
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
 
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
@@ -131,21 +152,22 @@ CONFIG_BOOT_LOAD=0x00800000
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
 
 #
-# Multi-device support (RAID and LVM)
+# ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_MD is not set
+# CONFIG_IDE is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# SCSI device support
 #
-# CONFIG_IDE is not set
+# CONFIG_SCSI is not set
 
 #
-# SCSI support
+# Multi-device support (RAID and LVM)
 #
-# CONFIG_SCSI is not set
+# CONFIG_MD is not set
 
 #
 # Fusion MPT device support
@@ -161,6 +183,10 @@ CONFIG_BOOT_LOAD=0x00800000
 #
 # CONFIG_I2O is not set
 
+#
+# Macintosh device drivers
+#
+
 #
 # Networking support
 #
@@ -172,7 +198,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 # CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -191,7 +216,9 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -200,9 +227,9 @@ CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_NET_DIVERT is not set
@@ -230,13 +257,13 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_CRC32=y
 # CONFIG_OAKNET is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -252,6 +279,7 @@ CONFIG_PCNET32=y
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
@@ -276,6 +304,7 @@ CONFIG_PCNET32=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 
@@ -294,8 +323,9 @@ CONFIG_PCNET32=y
 # CONFIG_NET_RADIO is not set
 
 #
-# Token Ring devices (depends on LLC=y)
+# Token Ring devices
 #
+# CONFIG_TR is not set
 # CONFIG_RCPCI is not set
 # CONFIG_SHAPER is not set
 
@@ -315,19 +345,19 @@ CONFIG_PCNET32=y
 # CONFIG_IRDA is not set
 
 #
-# ISDN subsystem
+# Bluetooth support
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_BT is not set
 
 #
-# Graphics support
+# ISDN subsystem
 #
-# CONFIG_FB is not set
+# CONFIG_ISDN_BOOL is not set
 
 #
-# Old CD-ROM drivers (not SCSI, not IDE)
+# Telephony Support
 #
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -347,18 +377,16 @@ CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_PCIPS2=y
 
 #
 # Input Device Drivers
 #
 
-#
-# Macintosh device drivers
-#
-
 #
 # Character devices
 #
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -366,6 +394,7 @@ CONFIG_SERIO_SERPORT=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -376,20 +405,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_UNIX98_PTY_COUNT=256
 
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
 #
 # Mice
 #
@@ -419,7 +434,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
 
 #
 # Multimedia devices
@@ -431,6 +450,26 @@ CONFIG_GEN_RTC=y
 #
 # CONFIG_DVB is not set
 
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
 #
 # File systems
 #
@@ -470,10 +509,12 @@ CONFIG_ISO9660_FS=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
 # CONFIG_DEVFS_FS is not set
 CONFIG_DEVPTS_FS=y
 # CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
 #
@@ -498,6 +539,7 @@ CONFIG_RAMFS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -518,31 +560,19 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 
 #
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
+# Native Language Support
 #
-# CONFIG_USB is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_NLS is not set
 
 #
 # Library routines
 #
-# CONFIG_CRC32 is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
 
 #
 # Security options

arch/ppc/kernel/entry.S

@@ -689,8 +689,8 @@ ret_from_crit_exc:
 	mtspr	SPRN_ESR,r10
 	lwz	r11,_NIP(r1)
 	lwz	r12,_MSR(r1)
-	mtspr	SRR2,r11
-	mtspr	SRR3,r12
+	mtspr	CSRR0,r11
+	mtspr	CSRR1,r12
 	lwz	r9,GPR9(r1)
 	lwz	r12,GPR12(r1)
 	lwz	r10,crit_sprg0@l(0)

arch/ppc/kernel/head.S

@@ -1657,7 +1657,7 @@ m8260_gorom:
 	andc	r11, r11, r10
 	mtspr	HID0, r11
 	isync
-	li	r5, MSR_
+	li	r5, MSR_ME|MSR_RI
 	lis	r6,2f@h
 	addis	r6,r6,-KERNELBASE@h
 	ori	r6,r6,2f@l

arch/ppc/kernel/misc.S

@@ -406,17 +406,18 @@ _GLOBAL(_tlbia)
 	tlbia
 	isync			/* Flush shadow TLB */
 #elif defined(CONFIG_44x)
-	lis	r3,0
+	li	r3,0
 	sync
-1:
-	tlbwe	r3,r3,PPC44x_TLB_PAGEID
-	addi	r3,r3,1
+
 	/* Load high watermark */
-	lis	r4,tlb_44x_hwater@h
-	ori	r4,r4,tlb_44x_hwater@l
-	lwz	r5,0(r4)
+	lis	r4,tlb_44x_hwater@ha
+	lwz	r5,tlb_44x_hwater@l(r4)
+
+1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
+	addi	r3,r3,1
 	cmpw	0,r3,r5
 	ble	1b
+
 	isync
 #else /* !(CONFIG_40x || CONFIG_44x) */
 #if defined(CONFIG_SMP)
@@ -470,17 +471,10 @@ _GLOBAL(_tlbie)
 	isync
 10:
 #elif defined(CONFIG_44x)
-	mfspr	r4,SPRN_MMUCR			/* Get MMUCR */
-	lis	r5,PPC44x_MMUCR_STS@h
-	ori	r5,r5,PPC44x_MMUCR_TID@l	/* Create mask */
-	andc	r4,r4,r5			/* Clear out TID/STS bits */
+	mfspr	r4,SPRN_MMUCR
 	mfspr	r5,SPRN_PID			/* Get PID */
-	or	r4,r4,r5			/* Set TID bits */
-	mfmsr	r6				/* Get MSR */
-	andi.	r6,r6,MSR_IS@l			/* TS=1? */
-	beq	11f				/* If not, leave STS=0 */
-	oris	r4,r4,PPC44x_MMUCR_STS@h	/* Set STS=1 */
-11:	mtspr	SPRN_MMUCR, r4			/* Put MMUCR */
+	rlwimi	r4,r5,0,24,31			/* Set TID */
+	mtspr	SPRN_MMUCR,r4
 
 	tlbsx.	r3, 0, r3
 	bne	10f

arch/ppc/mm/44x_mmu.c

@@ -64,7 +64,7 @@ extern struct mem_pieces phys_avail;
  * Just needed it declared someplace.
  */
 unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = 61;
+unsigned int tlb_44x_hwater = 62;
 
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
@@ -85,7 +85,7 @@ ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
 	tlbwe	%0,%3,%8"
 	:
 	: "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
-	  "i" (PPC44x_TLB_VALID | PPC44x_TLB_PAGESZ(PPC44x_PAGESZ_256M)),
+	  "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
 	  "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
 	  "i" (PPC44x_TLB_PAGEID),
 	  "i" (PPC44x_TLB_XLAT),

arch/ppc/platforms/4xx/Kconfig

@@ -13,48 +13,43 @@ choice
 
 config ASH
 	bool "Ash"
-
-config BEECH
-	bool "Beech"
-
-config CEDAR
-	bool "Cedar"
+	help
+	  This option enables support for the IBM NP405H evaluation board.
 
 config CPCI405
 	bool "CPCI405"
+	help
+	  This option enables support for the CPCI405 board.
 
 config EP405
 	bool "EP405/EP405PC"
+	help
+	  This option enables support for the EP405/EP405PC boards.
 
 config OAK
 	bool "Oak"
 	help
-	  Select Oak if you have an IBM 403GCX "Oak" Evaluation Board.
-
-	  Select Walnut if you have an IBM 405GP "Walnut" Evaluation Board.
-
-	  More information on these boards is available at:
-	  <http://www.chips.ibm.com/products/powerpc/tools/evk_pn.html#GCX>.
-
-config REDWOOD_4
-	bool "Redwood-4"
+	  This option enables support for the IBM 403GCX evaluation board.
 
 config REDWOOD_5
 	bool "Redwood-5"
+	help
+	  This option enables support for the IBM STB04 evaluation board.
 
 config REDWOOD_6
 	bool "Redwood-6"
+	help
+	  This option enables support for the IBM STBx25xx evaluation board.
 
 config SYCAMORE
 	bool "Sycamore"
-
-config TIVO
-	bool "Tivo"
+	help
+	  This option enables support for the IBM PPC405GPr evaluation board.
 
 config WALNUT
 	bool "Walnut"
 	help
-	  Select Walnut if you have an IBM 405GP "Walnut" Evaluation Board.
+	  This option enables support for the IBM PPC405GP evaluation board.
 
 endchoice
 
@@ -120,12 +115,6 @@ config IBM405_ERR51
 	depends on 40x && !405GPR
 	default y
 
-
-config PIN_TLB
-	bool
-	depends on 44x
-	default y
-
 config BOOKE
 	bool
 	depends on 44x
@@ -133,7 +122,7 @@ config BOOKE
 
 config IBM_OCP
 	bool
-	depends on ASH || BEECH || CEDAR || CPCI405 || EBONY || EP405 || OCOTEA || REDWOOD_4 || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || CPCI405 || EBONY || EP405 || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config IBM_EMAC4
@@ -141,19 +130,14 @@ config IBM_EMAC4
 	depends on 440GX
 	default y
 
-config NP405L
-	bool
-	depends on CEDAR
-	default y
-
 config BIOS_FIXUP
 	bool
-	depends on CEDAR || EP405 || SYCAMORE || WALNUT
+	depends on EP405 || SYCAMORE || WALNUT
 	default y
 
 config 403GCX
 	bool
-	depends OAK || TIVO
+	depends OAK
 	default y
 
 config 405GP
@@ -165,13 +149,9 @@ config 405GPR
 	bool
 	depends on SYCAMORE
 
-config 405LP
-	bool
-	depends on CEDAR
-
 config STB03xxx
 	bool
-	depends on REDWOOD_5 || REDWOOD_4 || REDWOOD_6
+	depends on REDWOOD_5 || REDWOOD_6
 	default y
 
 config EMBEDDEDBOOT
@@ -181,13 +161,9 @@ config EMBEDDEDBOOT
 
 config IBM_OPENBIOS
 	bool
-	depends on ASH || BEECH || CEDAR || REDWOOD_4 || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
-config 405_DMA
-	bool "Blue Logic DMA"
-	depends on 40x
-
 config PM
 	bool "Power Management support (EXPERIMENTAL)"
 	depends on 4xx && EXPERIMENTAL

arch/ppc/platforms/4xx/Makefile

@@ -2,27 +2,20 @@
 # Makefile for the PowerPC 4xx linux kernel.
 
 obj-$(CONFIG_ASH)		+= ash.o
-obj-$(CONFIG_BEECH)		+= beech.o
-obj-$(CONFIG_CEDAR)		+= cedar.o
 obj-$(CONFIG_CPCI405)		+= cpci405.o
 obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
 obj-$(CONFIG_OAK)		+= oak.o
 obj-$(CONFIG_OCOTEA)		+= ocotea.o
-obj-$(CONFIG_REDWOOD_4)		+= redwood.o
 obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
 obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
 obj-$(CONFIG_SYCAMORE)		+= sycamore.o
 obj-$(CONFIG_WALNUT)		+= walnut.o
 
-obj-$(CONFIG_NP405L)		+= ibmnp405l.o
 obj-$(CONFIG_405GP)		+= ibm405gp.o
-obj-$(CONFIG_REDWOOD_4)		+= ibmstb3.o
 obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
 obj-$(CONFIG_NP405H)		+= ibmnp405h.o
 obj-$(CONFIG_REDWOOD_6)		+= ibmstbx25.o
-obj-$(CONFIG_NP4GS3)		+= ibmnp4gs.o
-obj-$(CONFIG_405LP)		+= ibm405lp.o
 obj-$(CONFIG_EBONY)		+= ibm440gp.o
 obj-$(CONFIG_OCOTEA)		+= ibm440gx.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o

arch/ppc/platforms/4xx/beech.c

-/*
- * arch/ppc/platforms/beech.c  Platform setup for the IBM Beech board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2002, International Business Machines Corporation
- * All Rights Reserved
- *
- * Bishop Brock
- * IBM Research, Austin Center for Low-Power Computing
- * bcbrock@us.ibm.com
- * March, 2002
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/rtc.h>
-#include <linux/string.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-
-static void beech_ebc_setup(void);
-static void beech_fpga_setup(void);
-
-/*
-   Beech board physical memory map:
-
-   Main Memory (Initialized by the BIOS)
-   =======================================================================
-
-   SDRAM (64 MB)     0x00000000 - 0x04000000
-
-   OPB Space: (Mapped virtual = physical in ppc4xx_setup.c)
-   =======================================================================
-
-   UART0               	      0xEF600300
-   UART1               	      0xEF600400
-   IIC                 	      0xEF600500
-   OPB Arbiter         	      0xEF600600
-   GPIO Controller     	      0xEF600700
-   CODEC Interface            0xEF600900
-   Touch Panel Controller     0xEF600A00
-   DES Controller             0xEF600B00
-
-
-   EBC Space: (Mapped virtual = physical in ppc4xx_map_io(); EBC setup
-               for PCMCIA left to 4xx_pccf)
-   Space             EBC Bank    Physical Addresses  EBC Base Address
-   =========================================================================
-
-   PCMCIA (32 MB)        x       F0000000 - F1FFFFFF  F0000000
-
-   Expansion             2       F8000000 - F8FFFFFF  F8000000
-   Linux Flash (16 MB)           F9000000 - F9FFFFFF
-
-   NVRAM (32 KB)         1       FFE00000 - FFE07FFF  FFE00000
-
-
-   Ethernet(I/O)	 1	 FFE20300 - FFE2030F  FFE00000
-           (MEM)	 	 FFE40000 - FFE40FFF
-
-   FPGA_REG_4            1       FFE60000 - FFE60000  FFE00000
-   FPGA_REG_0            1       FFE80000 - FFE80000  FFE00000
-   FPGA_REG_1            1       FFEA0000 - FFEA0000  FFE00000
-   FPGA_REG_2            1       FFEC0000 - FFEC0000  FFE00000
-   FPGA_REG_3            1       FFEE0000 - FFEE0000  FFE00000
-
-   SRAM (512 KB)         0       FFF00000 - FFF7FFFF  FFF00000
-
-   Boot Flash  (512 KB)  0       FFF80000 - FFFFFFFF  FFF00000
-
-   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-   NB: On Beech 1, address ranges for Bank 2 were reversed
-
-*/
-
-void __init
-beech_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	TODC_INIT(TODC_TYPE_DCR146818, NULL, NULL, NULL, 8);
-
-	/* Set up Beech FPGA. */
-
-	beech_fpga_setup();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = beech_setup_arch;
-
-#ifdef CONFIG_PPC_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_dcr146818_read_val;
-	ppc_md.nvram_write_val = todc_dcr146818_write_val;
-#endif
-	/* Disable the LCD controller, which may have been left on by the
-	   BIOS.  Then do initialization of the EBC. */
-
-	mtdcri(DCRN_LCD0, DER, 0);
-	beech_ebc_setup();
-}
-
-/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- + Non-standard board support follows
- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-
-/****************************************************************************
- * EBC Setup
- ****************************************************************************/
-
-/* The EBC is set up for Beech.  This may simply replicate the setup already
-   done by the IBM BIOS for Beech (possibly with some address map changes), or
-   may be the first initialization if the board is booting from another BIOS.
-   Virtually all that is required to boot Linux on Beech is that the BIOS
-   enable the memory controller, load a Linux image from flash, and run it.
-
-   For optimal dynamic frequency scaling the EBC settings will also vary as the
-   frequency varies.
-*/
-
-static void __init
-beech_ebc_setup(void)
-{
-	ebc0_bnap_t ap;
-	ebc0_bncr_t cr;
-
-	/* Set EBC bank 0 for the SRAM and boot flash.
-
-	   Access parameters assume 120ns AMD flash @ 66.66 MHz maximum bus
-	   speed = 8 cycle access with 2 turnaround cycles (30 ns).
-
-	   These parameters will work for the SRAM as well, which is a 70 ns
-	   part.
-
-	   NB: IBM BIOS sets this bank to burst, however bursting will never
-	   happen in Linux because this region is mapped non-cacheable and
-	   guarded, so it is set non-burst here. */
-
-	cr.reg = (BEECH_BANK0_PADDR & 0xfff00000) |
-	    (mfdcri(DCRN_EBC0, BnCR(0)) & EBC0_BnCR_MASK);
-	cr.fields.bs = BEECH_BANK0_EBC_SIZE;
-	cr.fields.bu = EBC0_BnCR_BU_RW;
-	cr.fields.bw = EBC0_BnCR_BW_16;
-	mtdcri(DCRN_EBC0, BnCR(0), cr.reg);
-
-	ap.reg = mfdcri(DCRN_EBC0, BnAP(0)) & EBC0_BnAP_MASK;
-	ap.fields.twt = 8;
-	ap.fields.th = 2;
-	mtdcri(DCRN_EBC0, BnAP(0), ap.reg);
-
-	/*  EBC bank 1 is used for many purposes: NVRAM, Ethernet, and FPGA
-	   registers. This is a 1 MB, 16-bit bank. The access parameters must
-	   handle the worst case of all of the devices.
-
-	   The Ethernet chip needs 20 ns setup of the addresses to the I/O
-	   write signal (generated from the chip select), a minimum 150 ns
-	   cycle, and 30 ns of turnaround.  These settings will work for the
-	   other devices as well.
-	 */
-
-	cr.reg = (BEECH_BANK1_PADDR & 0xfff00000) |
-	    (mfdcri(DCRN_EBC0, BnCR(1)) & EBC0_BnCR_MASK);
-	cr.fields.bs = BEECH_BANK1_EBC_SIZE;
-	cr.fields.bu = EBC0_BnCR_BU_RW;
-	cr.fields.bw = EBC0_BnCR_BW_16;
-	mtdcri(DCRN_EBC0, BnCR(1), cr.reg);
-
-	ap.reg = mfdcri(DCRN_EBC0, BnAP(1)) & EBC0_BnAP_MASK;
-	ap.fields.twt = 10;
-	ap.fields.csn = 2;
-	ap.fields.th = 2;
-	mtdcri(DCRN_EBC0, BnAP(1), ap.reg);
-
-	/* Set EBC bank 2 for the big (Linux) flash.  There is 16 MB of flash,
-	   but the CPLD decodes a 32 MB region.
-
-	   Access parameters assume 90ns AMD flash @ 66.66 MHz maximum bus
-	   speed = 6 cycle access with 2 turnaround cycles (30 ns).
-
-	   NB: IBM BIOS sets this bank to burst, however bursting will never
-	   happen in Linux because this region is mapped non-cacheable and
-	   guarded, so it is set non-burst here. */
-
-	cr.reg = (BEECH_BANK2_PADDR & 0xfff00000) |
-	    (mfdcri(DCRN_EBC0, BnCR(2)) & EBC0_BnCR_MASK);
-	cr.fields.bs = BEECH_BANK2_EBC_SIZE;
-	cr.fields.bu = EBC0_BnCR_BU_RW;
-	cr.fields.bw = EBC0_BnCR_BW_8;
-	mtdcri(DCRN_EBC0, BnCR(2), cr.reg);
-
-	ap.reg = mfdcri(DCRN_EBC0, BnAP(2)) & EBC0_BnAP_MASK;
-	ap.fields.twt = 6;
-	ap.fields.th = 2;
-	mtdcri(DCRN_EBC0, BnAP(2), ap.reg);
-}
-
-/****************************************************************************
- * FPGA Setup
- ****************************************************************************/
-
-/* The Beech FPGA is set up for Linux. */
-
-static void __init
-beech_fpga_setup(void)
-{
-	volatile u8 *fpga_reg_2;
-
-	fpga_reg_2 = (volatile u8 *)
-	    ioremap(BEECH_FPGA_REG_2_PADDR, BEECH_FPGA_REG_2_SIZE);
-
-	/* Set RTS/CTS mode for UART 1 */
-
-	*fpga_reg_2 |= FPGA_REG_2_DEFAULT_UART1_N;
-}
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */

arch/ppc/platforms/4xx/beech.h

-/*
- * include/asm-ppc/platforms/beech.h   Platform definitions for the IBM Beech
- *                                     board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2002, International Business Machines Corporation
- * All Rights Reserved.
- *
- * Bishop Brock
- * IBM Research, Austin Center for Low-Power Computing
- * bcbrock@us.ibm.com
- * March, 2002
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_BEECH_H__
-#define __ASM_BEECH_H__
-
-#include <platforms/4xx/ibm405lp.h>
-
-#ifndef __ASSEMBLY__
-
-/*
- * Data structure defining board information maintained by the standard boot
- * ROM on the IBM Beech board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-	unsigned char bi_s_version[4];	/* Version of this structure */
-	unsigned long bi_tbfreq;	/* Frequency of SysTmrClk */
-	unsigned char bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int bi_memsize;	/* DRAM installed, in bytes */
-	unsigned long sysclock_period;	/* SysClk period in ns */
-	unsigned long sys_speed;	/* SysCLk frequency in Hz */
-	unsigned long bi_intfreq;	/* Processor speed, in Hz */
-	unsigned long vco_speed;	/* PLL VCO speed, in Hz */
-	unsigned long bi_busfreq;	/* PLB Bus speed, in Hz */
-	unsigned long opb_speed;	/* OPB Bus speed, in Hz */
-	unsigned long ebc_speed;	/* EBC Bus speed, in Hz */
-} bd_t;
-
-/* See beech.c for a concise diagram of the Beech physical memory map. */
-
-#define PPC4xx_ONB_IO_PADDR    ((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR    PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE     ((uint)4*1024)
-
-/* EBC Bank 0 controls the boot flash and SRAM */
-
-#define BEECH_BANK0_PADDR      ((uint)0xfff00000)
-#define BEECH_BANK0_EBC_SIZE   EBC0_BnCR_BS_1MB
-
-#define BEECH_SRAM_PADDR		BEECH_BANK0_PADDR
-#define BEECH_SRAM_SIZE			((uint)(512 * 1024))
-
-#define BEECH_BOOTFLASH_PADDR		(BEECH_BANK0_PADDR + (512 * 1024))
-#define BEECH_BOOTFLASH_SIZE		((uint)(512 * 1024))
-
-/* EBC bank 1 controls the NVRAM, Ethernet and CPLD registers. The different
-   areas are mapped in as small an area as possible to help catch any kernel
-   addressing errors.
-
-   NVRAM is improperly connected on Beech Pass 1.  Only every other location is
-   accessible.  This is a 32 KB NVRAM.
-
-   The Ethernet chip maps 13 address lines. We only map the "I/O" space used by
-   the current driver.
-
-   The FPGA "registers" are decoded on 128 KB boundarys. Each is mapped in a
-   separate page. */
-
-#define BEECH_BANK1_PADDR       ((uint)0xffe00000)
-#define BEECH_BANK1_EBC_SIZE    EBC0_BnCR_BS_1MB
-
-#define BEECH_NVRAM_PADDR		BEECH_BANK1_PADDR
-#define BEECH_NVRAM_SIZE		((uint) (32 * 1024))
-
-#define BEECH_ETHERNET_PADDR		(BEECH_BANK1_PADDR + 0x00020000)
-#define BEECH_ETHERNET_SIZE		((uint) (8 * 1024))
-
-#define BEECH_FPGA_REG_0_PADDR		(BEECH_BANK1_PADDR + 0x00080000)
-#define BEECH_FPGA_REG_0_SIZE		PAGE_SIZE
-
-#define BEECH_FPGA_REG_1_PADDR		(BEECH_BANK1_PADDR + 0x000A0000)
-#define BEECH_FPGA_REG_1_SIZE		PAGE_SIZE
-
-#define BEECH_FPGA_REG_2_PADDR		(BEECH_BANK1_PADDR + 0x000C0000)
-#define BEECH_FPGA_REG_2_SIZE		PAGE_SIZE
-
-#define BEECH_FPGA_REG_3_PADDR		(BEECH_BANK1_PADDR + 0x000E0000)
-#define BEECH_FPGA_REG_3_SIZE		PAGE_SIZE
-
-#define BEECH_FPGA_REG_4_PADDR		(BEECH_BANK1_PADDR + 0x00060000)
-#define BEECH_FPGA_REG_4_SIZE		PAGE_SIZE
-
-/* FPGA Register Bits (From IBM BIOS) [ May not be valid for Beech Pass 1 ]*/
-
-#define FPGA_REG_0_FLASH_N		0x01
-#define FPGA_REG_0_FLASH_ONBD_N		0x02
-#define FPGA_REG_0_HITA_TOSH_N		0x04	/* New in Pass 2 */
-#define FPGA_REG_0_STAT_OC		0x20
-#define FPGA_REG_0_AC_SOURCE_SEL_N	0x40
-#define FPGA_REG_0_AC_ACTIVE_N		0x80
-
-#define FPGA_REG_1_USB_ACTIVE		0x01	/* New in Pass 2 */
-#define FPGA_REG_1_CLK_VARIABLE		0x02
-#define FPGA_REG_1_CLK_TEST		0x04
-#define FPGA_REG_1_CLK_SS		0x08
-#define FPGA_REG_1_EXT_IRQ_N		0x10
-#define FPGA_REG_1_SMI_MODE_N		0x20
-#define FPGA_REG_1_BATT_LOW_N		0x40
-#define FPGA_REG_1_PCMCIA_PWR_FAULT_N	0x80
-
-#define FPGA_REG_2_DEFAULT_UART1_N	0x01
-#define FPGA_REG_2_EN_1_8V_PLL_N	0x02
-#define FPGA_REG_2_PC_BUF_EN_N		0x08
-#define FPGA_REG_2_CODEC_RESET_N	0x10	/* New in Pass 2 */
-#define FPGA_REG_2_TP_JSTICK_N		0x20	/* New in Pass 2 */
-
-#define FPGA_REG_3_GAS_GAUGE_IO		0x01
-
-#define FPGA_REG_4_SDRAM_CLK3_ENAB	0x01
-#define FPGA_REG_4_SDRAM_CLK2_ENAB	0x02
-#define FPGA_REG_4_SDRAM_CLK1_ENAB	0x04
-#define FPGA_REG_4_SDRAM_CLK0_ENAB	0x08
-#define FPGA_REG_4_PCMCIA_5V		0x10	/* New in Pass 2 */
-#define FPGA_REG_4_IRQ3			0x20	/* New in Pass 2 */
-
-/* EBC Bank 2 contains the 16 MB "Linux" flash. The FPGA decodes a 32 MB
-   bank. The lower 16 MB are available for expansion devices.  The upper 16 MB
-   are used for the "Linux" flash.
-
-   Partitioning information is for the benefit of the MTD driver.  See
-   drivers/mtd/maps/ibm4xx.c. We currently allocate the lower 1 MB for a
-   kernel, and the other 15 MB for a filesystem.
-
-*/
-
-/* Bank 2 mappings changed between Beech Pass 1 and Pass 2 */
-
-#ifdef CONFIG_BEECH_PASS1
-#define BEECH_BIGFLASH_OFFSET 0
-#else
-#define BEECH_BIGFLASH_OFFSET (16 * 1024 * 1024)
-#endif
-
-#define BEECH_BANK2_PADDR      ((uint)0xf8000000)
-#define BEECH_BANK2_EBC_SIZE   EBC0_BnCR_BS_32MB
-
-#define BEECH_BIGFLASH_PADDR		(BEECH_BANK2_PADDR + BEECH_BIGFLASH_OFFSET)
-#define BEECH_BIGFLASH_SIZE		(16 * 1024 * 1024)
-
-#define BEECH_KERNEL_OFFSET    0
-#define BEECH_KERNEL_SIZE      (1 * 1024 * 1024)
-
-#define BEECH_FREE_AREA_OFFSET BEECH_KERNEL_SIZE
-#define BEECH_FREE_AREA_SIZE   (BEECH_BIGFLASH_SIZE - BEECH_KERNEL_SIZE)
-
-/* The PCMCIA controller driver 4xx_pccf.c is responsible for the EBC setup of
-   PCMCIA.  Externally, EBC bank selects 3..7 take on PCMCIA functions when
-   PCMCIA is enabled. */
-
-#define BEECH_PCMCIA_PADDR		((uint)0xf0000000)
-#define BEECH_PCMCIA_SIZE		((uint)(32 * 1024 * 1024))
-
-/* We do not currently support the internal clock mode for the UART.  This
-   limits the minimum OPB frequency to just over 2X the UART oscillator
-   frequency. At OPB frequencies less than this the serial port will not
-   function due to the way that SerClk is sampled. */
-
-#define PPC4xx_SERCLK_FREQ		11059200
-#define BASE_BAUD			(PPC4xx_SERCLK_FREQ / 16)
-
-#define PPC4xx_MACHINE_NAME		"IBM 405LP Beech"
-
-/****************************************************************************
- * Non-standard board support follows
- ****************************************************************************/
-
-extern int beech_sram_free(void *p);
-extern int ibm405lp_set_pixclk(unsigned pixclk_low, unsigned pixclk_high);
-extern void *beech_sram_alloc(size_t size);
-
-#endif				/* !__ASSEMBLY__ */
-#endif				/* __ASM_BEECH_H__ */
-#endif				/* __KERNEL__ */

arch/ppc/platforms/4xx/cedar.c

-/*
- * arch/ppc/platforms/4xx/cedar.c
- *
- * Support for the IBM NP405L ceder eval board
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <asm/machdep.h>
-
-#include <asm/io.h>
-#include <asm/todc.h>
-
-void *cedar_rtc_base;
-
-void __init
-cedar_setup_arch(void)
-{
-	bd_t *bip = &__res;
-
-	/* RTC step for the walnut */
-	cedar_rtc_base = (void *) CEDAR_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, cedar_rtc_base, cedar_rtc_base,
-		  cedar_rtc_base, 8);
-
-#ifdef CONFIG_DEBUG_BRINGUP
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n", bip->bi_s_version);
-	printk("bi_r_version\t %s\n", bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
-	       bip->bi_memsize / (1024 * 1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	       bip->bi_enetaddr[0][0], bip->bi_enetaddr[0][1],
-	       bip->bi_enetaddr[0][2], bip->bi_enetaddr[0][3],
-	       bip->bi_enetaddr[0][4], bip->bi_enetaddr[0][5]);
-
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 1,
-	       bip->bi_enetaddr[1][0], bip->bi_enetaddr[1][1],
-	       bip->bi_enetaddr[1][2], bip->bi_enetaddr[1][3],
-	       bip->bi_enetaddr[1][4], bip->bi_enetaddr[1][5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq / 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-	       bip->bi_busfreq, bip->bi_busfreq / 1000000);
-	printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n",
-	       bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000);
-
-	printk("\n");
-#endif
-
-	/* Identify the system */
-	printk
-	    ("IBM Cedar port (C) 2002 MontaVista Software, Inc. (source@mvista.com)\n");
-
-}
-
-void __init
-cedar_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(CEDAR_RTC_VADDR,
-			 CEDAR_RTC_PADDR, CEDAR_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = cedar_setup_arch;
-	ppc_md.setup_io_mappings = cedar_map_io;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-}

arch/ppc/platforms/4xx/cedar.h

-/*
- * arch/ppc/platforms/4xx/cedar.h
- *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * Cedar eval board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_CEDAR_H__
-#define __ASM_CEDAR_H__
-#include <platforms/4xx/ibmnp405l.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Cedar" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-	unsigned char	 bi_s_version[4];	/* Version of this structure */
-	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[2][6];	/* Local Ethernet MAC address */
-	unsigned char	 bi_pci_mac[6];
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI speed in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-/* Memory map for the IBM "Cedar" NP405 evaluation board.
- */
-
-extern  void *cedar_rtc_base;
-#define CEDAR_RTC_PADDR		((uint)0xf0000000)
-#define CEDAR_RTC_VADDR		CEDAR_RTC_PADDR
-#define CEDAR_RTC_SIZE		((uint)8*1024)
-
-/* Early initialization address mapping for block_io.
- * Standard 405GP map.
- */
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD		201600
-#else
-#define BASE_BAUD		691200
-#endif
-
-#define PPC4xx_MACHINE_NAME "IBM NP405L Cedar"
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_CEDAR_H__ */
-#endif /* __KERNEL__ */

arch/ppc/platforms/4xx/ibm405lp.c

-/*
- * arch/ppc/platforms/ibm405lp.c  405LP-specific code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2002, International Business Machines Corporation
- * All Rights Reserved.
- *
- * Bishop Brock
- * IBM Research, Austin Center for Low-Power Computing
- * bcbrock@us.ibm.com
- * March, 2002
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/string.h>
-
-#include <asm/delay.h>
-#include <asm/hardirq.h>
-#include <asm/ibm4xx.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/uaccess.h>
-#include <asm/ocp.h>
-
-struct ocp_def core_ocp[]  __initdata = {
-	{OCP_VENDOR_IBM, OCP_FUNC_OPB, OPB0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
-	{OCP_VENDOR_IBM, OCP_FUNC_16550, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
-	{OCP_VENDOR_IBM, OCP_FUNC_16550, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
-	{OCP_VENDOR_IBM, OCP_FUNC_IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
-	{OCP_VENDOR_IBM, OCP_FUNC_GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
-	{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
-};
-
-#ifdef CONFIG_PM
-/* Set up the 405LP clock and power management unit for aggressive power
-   management.
-
-   Briefly, there are 3 CPM "classes":
-
-   Class 1 - Either completely asleep or awake.  The "force" state is
-             equivalent to the "enabled" state.  Many Class 1 units are
-             critical system components and are never power managed.
-
-   Class 2 - Can be enabled for power management, where sleep requests are
-             made by the peripheral, typically after an inactivity timeout.
-	     When sleeping, critical interfaces remain active, and
-	     awaken the unit whenever it is targeted with a transaction.
-
-   Class 3 - Can be enabled for power management, where sleep requests are
-             made by the CPM.  Power management for these units typically
-             will require intelligence in a device driver.
-
-   In the current implementation, the "force" bits are only used on Class 1
-   devices, and only when the associated driver has the intelligence necessary
-   to "unforce" the power management state.  A previous scheme, which tried to
-   enable power management based on whether a particular driver was compiled
-   with the kernel, caused many problems and is never used here.
-
-   Class 2 devices with timeouts are normally initialized for the most
-   aggressive values.  There is no power management benefit of "forcing" Class
-   2 devices over letting their inactivity timeouts take effect.  Therefore,
-   after being set up here, Class 2 device drivers don't need to worry about
-   CPM.
-
-   No Class 3 devices are handled yet.  */
-
-void __init
-ibm405lp_setup_cpm(void)
-{
-	u32 force = 0;
-	u32 enable = 0;
-	dma0_slp_t dma0_slp;
-	dcp0_cfg_t dcp0_cfg;
-	ebc0_cfg_t ebc0_cfg;
-	sdram0_cfg_t sdram0_cfg;
-	sdram0_pmit_t sdram0_pmit;
-	sla0_slpmd_t sla0_slpmd;
-
-	/* Initialize the CPM state */
-
-	mtdcr(DCRN_CPMFR, force);
-	mtdcr(DCRN_CPMER, enable);
-
-	/* IIC - Class 3 - Not handled yet.  The driver should at least be able
-	   to force/unforce itself. */
-
-	/* CPU - class 2 - There doesn't appear to be a timeout associated with
-	   this, and the exact function is not documented anywhere.  It saves a
-	   lot of power, though. I assume this gates core clocks when the CPU
-	   core is asleep, and probably adds a couple of cycles of latency when
-	   the CPU core wakes up. */
-
-	enable |= IBM_CPM_CPU;
-
-	/* DMA - class 2. Set for the minimum timeout, which is 32 cycles. */
-
-	dma0_slp.reg = mfdcr(DCRN_SLP);
-	dma0_slp.fields.sme = 1;
-	dma0_slp.fields.idu = 0;
-	mtdcr(DCRN_SLP, dma0_slp.reg);
-	enable |= IBM_CPM_DMA;
-
-	/* BRG - Class 2.  Seems to crash the system when enabled in 405LP Pass
-	   1
-
-	   DCP (CodePack) - Class 2.  The semantics of the sleep delay are not
-	   documented. We'll use 32 (what the heck). */
-
-	dcp0_cfg.reg = mfdcri(DCRN_DCP0, CFG);
-	dcp0_cfg.fields.slen = 1;
-	dcp0_cfg.fields.sldy = 32;
-	mtdcri(DCRN_DCP0, CFG, dcp0_cfg.reg);
-	enable |= IBM_CPM_DCP;
-
-	/* EBC - Class 2.  Set for minimum timeout, which is 32 cycles. [ I
-	   think this is 32. It may be 64. I don't trust the documentation. ]
-	 */
-
-	ebc0_cfg.reg = mfdcri(DCRN_EBC0, CFG);
-	ebc0_cfg.fields.pme = 1;
-	ebc0_cfg.fields.pmt = 1;
-	mtdcri(DCRN_EBC0, CFG, ebc0_cfg.reg);
-	enable |= IBM_CPM_EBC;
-
-	/* SDRAM - Class 2.  Set for the minimum 32-cycle timeout.
-
-	   The documentation on this core is clear - waking a sleeping SDRAM
-	   controller takes 2 PLB cycles, which is added to the latency of the
-	   memory operation. If someone can prove that this is affecting
-	   performance we can easily back this off.  */
-
-	sdram0_cfg.reg = mfdcri(DCRN_SDRAM0, CFG);
-	sdram0_cfg.fields.pme = 1;
-	mtdcri(DCRN_SDRAM0, CFG, sdram0_cfg.reg);
-
-	sdram0_pmit.reg = mfdcri(DCRN_SDRAM0, PMIT);
-	sdram0_pmit.fields.cnt = 0;
-	mtdcri(DCRN_SDRAM0, PMIT, sdram0_pmit.reg);
-
-	enable |= IBM_CPM_SDRAM0;
-
-	/* PLB - Class 2.  Seems to crash the system when enabled in 405LP Pass
-	   1.
-
-	   GPIO - Class 1.  This unit is used for many things, and no single
-	   driver controls all GPIO.  It's best left unmanaged (it doesn't use
-	   much power anyway). NB: 405LP Pass 1 erratum - forcing PM on GPIO
-	   kills the TPC.
-
-	   UART0 - Class 1
-	   UART1 - Class 1
-
-	   Someone should work on the serial port drivers to enable PM support
-	   for them. Any takers?
-
-	   UIC        - Class 1
-	   CPU_TMRCLK - Class 1
-
-	   These system resources are never power managed.  */
-
-	/* SLA - Class 2.  Set for the minimum 32-cycle timeout. */
-
-	sla0_slpmd.reg = mfdcri(DCRN_SLA0, SLPMD);
-	sla0_slpmd.fields.slen = 1;
-	sla0_slpmd.fields.slcr = 0;
-	mtdcri(DCRN_SLA0, SLPMD, sla0_slpmd.reg);
-	enable |= IBM_CPM_SLA;
-
-	/* CSI  - Class 1.
-	   TPC  - Class 1.
-	   TDES - Class 1.
-
-	   The drivers for these units are power-aware, and manage the device
-	   properly. By default these units are forced off at boot. */
-
-	force |= IBM_CPM_CSI;
-	force |= IBM_CPM_TPC;
-	force |= IBM_CPM_TDES;
-
-	/* Set the CPM state */
-
-	mtdcr(DCRN_CPMFR, force);
-	mtdcr(DCRN_CPMER, enable);
-}
-#endif
-
-/* This routine is included here because the framebuffer driver needs a way to
-   tell the system the Pixel clock frequency it needs, regardless of whether
-   run-time frequency scaling is configured.  A hook and a couple of global
-   variables are always present and will be used by the RTVFS driver if it is
-   loaded.
-
-   Pixel clock setting is kind of a hack, as the frequency steps available from
-   the PLB/PixClk divider may be too large to guarantee that we'll hit within
-   the given limits.  We never set the frequency above the upper bound, but due
-   to quantization may need to set the frequency below the lower bound.  So far
-   it works OK for the panels we've tried.
-
-   In general, the choice of a system clock frequency should be made with
-   consideration of the LCD panel to be attached, to guarantee a good clock
-   divider for the Pixel clock regardless of frequency scaling.
-
-   Clock frequencies are in KHz. If pixclk_min or pixclk_max are zero, we set
-   the lowest possible frequency to conserve energy. */
-
-int (*set_pixclk_hook) (unsigned pixclk_min, unsigned pixclk_max) = NULL;
-unsigned last_pixclk_min = 0;
-unsigned last_pixclk_max = 0;
-
-EXPORT_SYMBOL(set_pixclk_hook);
-EXPORT_SYMBOL(last_pixclk_min);
-EXPORT_SYMBOL(last_pixclk_max);
-
-int
-ibm405lp_set_pixclk(unsigned pixclk_min, unsigned pixclk_max)
-{
-	unsigned divider;
-	bd_t *bip = (bd_t *) __res;
-	unsigned plb_khz = bip->bi_busfreq / 1000;
-	cpc0_cgcr1_t cgcr1;
-
-	if (set_pixclk_hook) {
-		return (set_pixclk_hook) (pixclk_min, pixclk_max);
-	} else {
-		if ((pixclk_min == 0) || (pixclk_max == 0))
-			divider = CPC0_DIV_MAX;
-		else {
-			divider = plb_khz / pixclk_min;
-			if (divider == 0)
-				divider = 1;
-			if ((divider < CPC0_DIV_MAX) &&
-			    ((plb_khz / divider) > pixclk_max))
-				divider++;
-		}
-
-		cgcr1.reg = mfdcr(DCRN_CPC0_CGCR1);
-		cgcr1.fields.ppxl = CPC0_DIV_ENCODE(divider);
-		mtdcr(DCRN_CPC0_CGCR1, cgcr1.reg);
-
-		last_pixclk_min = pixclk_min;
-		last_pixclk_max = pixclk_max;
-		return 0;
-	}
-}

arch/ppc/platforms/4xx/ibmnp405l.c

-/*
- * arch/ppc/platforms/4xx/ibmnp405l.c
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibmnp405l.h>
-
-struct ocp_def core_ocp[] = {
-	{UART, UART0_IO_BASE, UART0_INT, IBM_CPM_UART0},
-	{UART, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
-	{IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
-	{GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
-	{OPB, OPB0_BASE, OCP_IRQ_NA, IBM_CPM_OPB},
-	{EMAC, EMAC0_BASE, BL_MAC_ETH0, IBM_CPM_EMAC0},
-	{EMAC, EMAC1_BASE, BL_MAC_ETH1, IBM_CPM_EMAC1},
-	{ZMII, ZMII0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
-	{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
-
-};

arch/ppc/platforms/4xx/ibmnp405l.h

-/*
- * arch/ppc/platforms/4xx/ibmnp405l.h
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMNP405L_H__
-#define __ASM_IBMNP405L_H__
-
-#include <linux/config.h>
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define IIC0_BASE	0xEF600500
-#define OPB0_BASE	0xEF600600
-#define GPIO0_BASE	0xEF600700
-#define EMAC0_BASE	0xEF600800
-#define EMAC1_BASE	0xEF600900
-#define ZMII0_BASE	0xEF600C10
-#define BL_MAC_WOL	41	/* WOL */
-#define BL_MAL_SERR	45	/* MAL SERR */
-#define BL_MAL_TXDE	46	/* MAL TXDE */
-#define BL_MAL_RXDE	47	/* MAL RXDE */
-#define BL_MAL_TXEOB	17	/* MAL TX EOB */
-#define BL_MAL_RXEOB	18	/* MAL RX EOB */
-#define BL_MAC_ETH0	37	/* MAC */
-#define BL_MAC_ETH1	38	/* MAC */
-
-#define EMAC_NUMS	2
-
-#define IIC0_IRQ	2
-
-#undef NR_UICS
-#define NR_UICS	2
-#define UIC_CASCADE_MASK 0x0003	/* bits 30 & 31 */
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base:(u8 *) UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(1)          \
-        STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-/* ------------------------------------------------------------------------- */
-
-#define DCRN_CHCR_BASE	0x0F1
-#define DCRN_CHPSR_BASE	0x0B4
-#define DCRN_CPMSR_BASE	0x0BA
-#define DCRN_CPMFR_BASE	0x0B9
-#define DCRN_CPMER_BASE	0x0B8
-
-#define IBM_CPM_EMAC0	0x00800000	/* on-chip ethernet MM unit */
-#define IBM_CPM_EMAC1	0x00100000	/* EMAC 1 MII */
-#define IBM_CPM_UIC1	0x00020000	/* Universal Interrupt Controller */
-#define IBM_CPM_UIC0	0x00010000	/* Universal Interrupt Controller */
-#define IBM_CPM_CPU	0x00008000	/* processor core */
-#define IBM_CPM_EBC	0x00004000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0	0x00002000	/* SDRAM memory controller */
-#define IBM_CPM_GPIO0	0x00001000	/* General Purpose IO (??) */
-#define IBM_CPM_HDLC	0x00000800	/* HDCL */
-#define IBM_CPM_TMRCLK	0x00000400	/* CPU timers */
-#define IBM_CPM_PLB	0x00000100	/* PLB bus arbiter */
-#define IBM_CPM_OPB	0x00000080	/* PLB to OPB bridge */
-#define IBM_CPM_DMA	0x00000040	/* DMA controller */
-#define IBM_CPM_IIC0	0x00000010	/* IIC interface */
-#define IBM_CPM_UART0	0x00000002	/* serial port 0 */
-#define IBM_CPM_UART1	0x00000001	/* serial port 1 */
-#define DFLT_IBM4xx_PM	~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU	\
-			| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB	\
-			| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA	\
-			| IBM_CPM_EMAC0 | IBM_CPM_EMAC1)
-
-#define DCRN_DMA0_BASE	0x100
-#define DCRN_DMA1_BASE	0x108
-#define DCRN_DMA2_BASE	0x110
-#define DCRN_DMA3_BASE	0x118
-#define DCRNCAP_DMA_SG	1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE	0x120
-#define DCRN_EBC_BASE	0x012
-#define DCRN_DCP0_BASE	0x014
-#define DCRN_MAL_BASE	0x180
-#define DCRN_MAL1_BASE	0x200
-#define DCRN_OCM0_BASE	0x018
-#define DCRN_PLB0_BASE	0x084
-#define DCRN_PLLMR_BASE	0x0F0
-#define DCRN_POB0_BASE	0x0A0
-#define DCRN_SDRAM0_BASE 0x010
-#define DCRN_UIC0_BASE	0x0C0
-#define DCRN_UIC1_BASE	0x0D0
-#define DCRN_CPC0_EPRCSR 0x0F3
-
-#define UIC0_UIC1NC      30	/* UIC1 non-critical interrupt */
-#define UIC0_UIC1CR      31	/* UIC1 critical interrupt */
-
-#define CHR1_CETE	0x00000004	/* CPU external timer enable */
-#define UIC0	DCRN_UIC0_BASE
-#define UIC1	DCRN_UIC1_BASE
-
-#define SDRAM_CFG	0x20
-#define SDRAM0_ECCCFG	0x94
-#define SDRAM_NO_ECC	0x10000000
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMNP405L_H__ */
-#endif				/* __KERNEL__ */

arch/ppc/platforms/4xx/ibmnp4gs.c

-/*
- * arch/ppc/platforms/4xx/ibmnp4gs.c
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include "ibmnp4gs.h"
-#include <asm/ocp.h>
-
-struct ocp_def core_ocp[] = {
-	{UART, UART0_IO_BASE, UART0_INT, IBM_CPM_UART0},
-	{PCI, PCIL0_BASE, OCP_IRQ_NA, IBM_CPM_PCI},
-	{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
-
-};

arch/ppc/platforms/4xx/ibmnp4gs.h

-/*
- * arch/ppc/platforms/4xx/ibmnp4gs.h
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMNP4GS_H__
-#define __ASM_IBMNP4GS_H__
-
-#include <linux/config.h>
-#include <asm/ibm_ocp.h>
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-#define PCI_CONFIG_ADDR_MASK		0x7F000000
-#define PCI_CONFIG_CYCLE_ENABLE		0x80000000
-#define PCI_BASE_ADDRESS_2		0x18	/* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_MEM_PREFETCH	0x08
-#define PCI_CONFIG_ADDR_MASK		0x7F000000
-#define PCI_CONFIG_CYCLE_ENABLE		0x80000000
-#define PCI_BASE_ADDRESS_MEM_CARD1	0x80000000
-#define PCI_BASE_ADDRESS_MEM_CARD2	0x90000000
-#define PPC405_UART0_INT		1
-#define PPC_405RAINIER2_IO_PAGE		((void*)0xe8001000)
-#define PPC_405RAINIER1_IO_PAGE		((void*)0xe8002000)
-#define PPC405_UART0_IO_BASE		0x300	/* mostly use (rainier_io_page+0x300) */
-#define RAINIER_IO_PAGE_INTERPOSER_PADDR 0xe8000000
-#define RAINIER_IO_PAGE_INTERPOSER_VADDR RAINIER_IO_PAGE_INTERPOSER_PADDR
-#define RAINIER_IO_PAGE_PCI_PADDR	0xeec00000
-#define RAINIER_IO_PAGE_PCI_VADDR	RAINIER_IO_PAGE_PCI_PADDR
-
-/* serial port defines */
-#define RS_TABLE_SIZE	1
-
-#define UART0_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	PPC_405RAINIER1_IO_PAGE + PPC405_UART0_IO_BASE
-
-#define UART_NUMS	1
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_BRG		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-
-#define DFLT_IBM4xx_PM		0
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMNP4GS_H__ */
-#endif				/* __KERNEL__ */

arch/ppc/platforms/4xx/ibmstb3.c

-/*
- * arch/ppc/platforms/4xx/ibmstb3.c
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/config.h>
-#include "ibmstb3.h"
-#include <asm/ocp.h>
-
-struct ocp_def core_ocp[] = {
-	{UART, UART0_IO_BASE, UART0_INT, IBM_CPM_UART0},
-	{IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
-	{IIC, IIC1_BASE, IIC1_IRQ, IBM_CPM_IIC1},
-	{GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
-	{OPB, OPB0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
-	{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
-
-};

arch/ppc/platforms/4xx/ibmstb3.h

-/*
- * arch/ppc/platforms/4xx/ibmstb3.h
- *
- * Authors: Armin Kuster <akuster@mvista.com>, Tom Rini <trini@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTBX_H__
-#define __ASM_IBMSTBX_H__
-
-#include <linux/config.h>
-#include <platforms/4xx/ibm_ocp.h>
-
-/* ibm405.h at bottom of this file */
-
-/*
- * Memory map for the IBM "Redwood-4" STB03xxx evaluation board.
- *
- * The  STB03xxx internal i/o addresses don't work for us 1:1,
- * so we need to map them at a well know virtual address.
- *
- * 4000 000x   uart1           -> 0xe000 000x
- * 4001 00xx   ppu
- * 4002 00xx   smart card
- * 4003 000x   iic
- * 4004 000x   uart0
- * 4005 0xxx   timer
- * 4006 00xx   gpio
- * 4007 00xx   smart card
- * 400b 000x   iic
- * 400c 000x   scp
- * 400d 000x   modem
- */
-
-#define STB03xxx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_PADDR	((uint)0x40000000)
-#define PPC4xx_ONB_IO_VADDR	STB03xxx_IO_BASE
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/* Since we're into address mapping hacks, at least try to hide
- * it under a macro.....
- */
-#define STB03xxx_MAP_IO_ADDR(a)	(((uint)(a) & 0x000fffff) + PPC4xx_ONB_IO_VADDR)
-
-#define RS_TABLE_SIZE		1
-#define UART0_INT		20
-#ifdef __BOOTER__
-#define UART0_IO_BASE		0x40040000
-#else
-#define UART0_IO_BASE		0xe0040000
-#endif
-
- /* UART 0 is duped here so when the SICC is the default console
-  * then ttys1 is configured properly - armin
-  */
-
-#define UART1_INT		20
-#ifdef __BOOTER__
-#define UART1_IO_BASE		0x40040000
-#else
-#define UART1_IO_BASE		0xe0040000
-#endif
-
-/* need to make this work in scheme - armin */
-
-#define SICC0_INTRX		21
-#define SICC0_INTTX		22
-#define SICC0_IO_BASE		((uint* )0x40000000)
-
-#define IDE0_BASE		0xf2100000
-#define REDWOOD_IDE_CTRL	0xf4100000
-
-#define IIC0_BASE	0x40030000
-#define IIC1_BASE	0x400b0000
-#define OPB0_BASE	0x40010000
-#define GPIO0_BASE	0x40060000
-#define IIC0_IRQ	9
-#define IIC1_IRQ	10
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-#define IDE0_IRQ 	25
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_POB0_BASE		0x0B0
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_I1284	0x40000000	/* IEEE-1284 */
-#define IBM_CPM_IIC1	0x20000000	/* IIC 1 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_SDRAM1	0x02000000	/* SDRAM 1 memory controller */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_CPM_DCRX	0x00040000	/* DCR Extension */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 1 */
-#define IBM_CPM_SDRAM0	0x00004000	/* SDRAM 0 memory controller */
-#define IBM_CPM_XPT54	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_TMRCLK	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_MSI	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_UART2	0x00000008	/* Serial Control Port */
-#define IBM_CPM_DSCR	0x00000004	/* Descrambler */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
-			| IBM_CPM_DMA | IBM_CPM_CBS | IBM_CPM_SDRAM0 \
-			| IBM_CPM_XPT54 | IBM_CPM_TMRCLK | IBM_CPM_XPT27 \
-			| IBM_CPM_UIC)
-
-#ifdef DCRN_CIC_BASE
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-#endif
-
-#ifdef DCRN_DCRX_BASE
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-#endif
-
-#ifdef DCRN_EBC_BASE
-#define DCRN_EBCCFGADR	(DCRN_EBC_BASE + 0x0)	/* Peripheral Controller Address */
-#define DCRN_EBCCFGDATA	(DCRN_EBC_BASE + 0x1)	/* Peripheral Controller Data */
-#endif
-
-#ifdef DCRN_EBIMC_BASE
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-#endif
-
-#ifdef DCRN_SCCR_BASE
-#define DCRN_SCCR	(DCRN_SCCR_BASE + 0x0)
-#endif
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR	(DCRN_SDRAM0_BASE + 0x0)	/* Memory Controller Address */
-#define DCRN_SDRAM0_CFGDATA	(DCRN_SDRAM0_BASE + 0x1)	/* Memory Controller Data */
-#endif
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC	(DCRN_OCM0_BASE + 0x0)	/* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR	(DCRN_OCM0_BASE + 0x1)	/* OCM Instr Side Control */
-#define DCRN_OCMDSARC	(DCRN_OCM0_BASE + 0x2)	/* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR	(DCRN_OCM0_BASE + 0x3)	/* OCM Data Side Control */
-#endif
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTBX_H__ */
-#endif				/* __KERNEL__ */

arch/ppc/platforms/4xx/oak_setup.c → arch/ppc/platforms/4xx/oak.c

@@ -2,7 +2,7 @@
  *
  *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
  *
- *    Module name: oak_setup.c
+ *    Module name: oak.c
  *
  *    Description:
  *      Architecture- / platform-specific boot-time initialization code for
@@ -29,7 +29,7 @@
 #include <asm/ppc4xx_pic.h>
 #include <asm/time.h>
 
-#include "oak_setup.h"
+#include "oak.h"
 
 /* Function Prototypes */
 

arch/ppc/platforms/4xx/oak.h

@@ -60,6 +60,31 @@ typedef struct board_info {
 	unsigned int	 bi_busfreq;		/* Bus speed, in Hz */
 } bd_t;
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void		 oak_init(unsigned long r3,
+				  unsigned long ird_start,
+				  unsigned long ird_end,
+				  unsigned long cline_start,
+				  unsigned long cline_end);
+extern void		 oak_setup_arch(void);
+extern int		 oak_setup_residual(char *buffer);
+extern void		 oak_init_IRQ(void);
+extern int		 oak_get_irq(struct pt_regs *regs);
+extern void		 oak_restart(char *cmd);
+extern void		 oak_power_off(void);
+extern void		 oak_halt(void);
+extern void		 oak_time_init(void);
+extern int		 oak_set_rtc_time(unsigned long now);
+extern unsigned long	 oak_get_rtc_time(void);
+extern void		 oak_calibrate_decr(void);
+
+#ifdef __cplusplus
+}
+#endif
+
 /* Some 4xx parts use a different timebase frequency from the internal clock.
 */
 #define bi_tbfreq bi_intfreq

arch/ppc/platforms/4xx/redwood.c

-/*
- * arch/ppc/platforms/4xx/redwood.c
- *
- * Author: Frank Rowand <frank_rowand@mvista.com>, or source@mvista.com
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-void __init
-redwood_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_IDE
-	void *xilinx, *xilinx_1, *xilinx_2;
-	unsigned short reg5;
-
-	xilinx = ioremap(IDE_XLINUX_MUX_BASE, 0x10);
-
-	/* init xilinx control registers - enable ide mux, clear reset bit */
-	if (!xilinx) {
-		printk(KERN_CRIT
-		       "redwood4_setup_arch() xilinx ioremap failed\n");
-		return;
-	}
-	xilinx_1 = xilinx;
-	xilinx_2 = xilinx + 0xe;
-
-	reg5 = readw(xilinx_1);
-	writeb(reg5 |= ~(0x8001), xilinx_1);
-	writeb(0, xilinx_2);
-
-	udelay(10 * 1000);
-
-	writeb(reg5 & 0x8001, xilinx_1);
-	writeb(0, xilinx_2);
-	
-       	/* add RE & OEN to value set by boot rom */
-        mtdcr(DCRN_BRCR3, 0x407cfffe);
-
-#endif
-
-}
-
-void __init
-redwood_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	io_block_mapping(OAKNET_IO_VADDR,
-			 OAKNET_IO_PADDR, OAKNET_IO_SIZE, _PAGE_IO);
-
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood_setup_arch;
-	ppc_md.setup_io_mappings = redwood_map_io;
-}

arch/ppc/platforms/4xx/redwood.h

-/*
- * arch/ppc/platforms/4xx/redwood.h
- *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STB03xxx "Redwood" evaluation board.
- *
- * Author: Frank Rowand <frank_rowand@mvista.com>, or source@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD_H__
-#define __ASM_REDWOOD_H__
-
-/* Redwoods have an STB03xxx or STB04xxx core */
-#include <platforms/4xx/ibmstb3.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char	bi_s_version[4];	/* Version of this structure */
-	unsigned char	bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	bi_memsize;		/* DRAM installed, in bytes */
-	unsigned int	bi_dummy;		/* field shouldn't exist */
-	unsigned char	bi_enetaddr[6];		/* Ethernet MAC address */
-	unsigned int	bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	bi_busfreq;		/* Bus speed, in Hz */
-} bd_t;
-#define bi_tbfreq bi_intfreq
-
-#endif /* !__ASSEMBLY__ */
-
-#define bi_tbfreq bi_intfreq
-#define OAKNET_IO_PADDR		((uint)0xf2000000)
-#define OAKNET_IO_VADDR		OAKNET_IO_PADDR
-#define OAKNET_IO_BASE		OAKNET_IO_VADDR
-
-/* ftr revisit- io size was 0xffff in old-line, is 0x40 in oak.h */
-#define OAKNET_IO_SIZE		0xffff
-#define OAKNET_INT		26	/* EXTINT1 */
-
-#define IDE_XLINUX_MUX_BASE        0xf2040000
-#define IDE_DMA_ADDR	0xfce00000
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood"
-
-#endif /* __ASM_REDWOOD_H__ */
-#endif /* __KERNEL__ */

arch/ppc/platforms/Makefile

@@ -20,7 +20,7 @@ obj-$(CONFIG_PPC_PMAC)		+= pmac_pic.o pmac_setup.o pmac_time.o \
 					pmac_feature.o pmac_pci.o pmac_sleep.o \
 					pmac_low_i2c.o
 obj-$(CONFIG_PPC_CHRP)		+= chrp_setup.o chrp_time.o chrp_pci.o
-obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_time.o prep_setup.o
+obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_setup.o
 ifeq ($(CONFIG_PPC_PMAC),y)
 obj-$(CONFIG_NVRAM)		+= pmac_nvram.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= pmac_cpufreq.o

arch/ppc/platforms/prep_pci.c

@@ -1171,8 +1171,6 @@ void __init
 prep_pcibios_fixup(void)
 {
         struct pci_dev *dev = NULL;
-        extern unsigned char *Motherboard_map;
-        extern unsigned char *Motherboard_routes;
 
 	prep_route_pci_interrupts();
 

arch/ppc/platforms/prep_setup.c

@@ -58,16 +58,14 @@
 #include <asm/i8259.h>
 #include <asm/open_pic.h>
 #include <asm/pci-bridge.h>
+#include <asm/todc.h>
+
+TODC_ALLOC();
 
 unsigned char ucSystemType;
 unsigned char ucBoardRev;
 unsigned char ucBoardRevMaj, ucBoardRevMin;
 
-extern unsigned long mc146818_get_rtc_time(void);
-extern int mc146818_set_rtc_time(unsigned long nowtime);
-extern unsigned long mk48t59_get_rtc_time(void);
-extern int mk48t59_set_rtc_time(unsigned long nowtime);
-
 extern unsigned char prep_nvram_read_val(int addr);
 extern void prep_nvram_write_val(int addr,
 				 unsigned char val);
@@ -814,12 +812,12 @@ prep_setup_arch(void)
 }
 
 /*
- * Determine the decrementer frequency from the residual data
- * This allows for a faster boot as we do not need to calibrate the
- * decrementer against another clock. This is important for embedded systems.
+ * First, see if we can get this information from the residual data.
+ * This is important on some IBM PReP systems.  If we cannot, we let the
+ * TODC code handle doing this.
  */
-static int __init
-prep_res_calibrate_decr(void)
+static void __init
+prep_calibrate_decr(void)
 {
 #ifdef CONFIG_PREP_RESIDUAL
 	unsigned long freq, divisor = 4;
@@ -831,149 +829,9 @@ prep_res_calibrate_decr(void)
 				(freq/divisor)%1000000);
 		tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
 		tb_ticks_per_jiffy = freq / HZ / divisor;
-		return 0;
 	} else
 #endif
-		return 1;
-}
-
-/*
- * Uses the on-board timer to calibrate the on-chip decrementer register
- * for prep systems.  On the pmac the OF tells us what the frequency is
- * but on prep we have to figure it out.
- * -- Cort
- */
-/* Done with 3 interrupts: the first one primes the cache and the
- * 2 following ones measure the interval. The precision of the method
- * is still doubtful due to the short interval sampled.
- */
-static volatile int calibrate_steps __initdata = 3;
-static unsigned tbstamp __initdata = 0;
-
-static irqreturn_t __init
-prep_calibrate_decr_handler(int irq, void *dev, struct pt_regs *regs)
-{
-	unsigned long t, freq;
-	int step=--calibrate_steps;
-
-	t = get_tbl();
-	if (step > 0) {
-		tbstamp = t;
-	} else {
-		freq = (t - tbstamp)*HZ;
-		printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-			 freq/1000000, freq%1000000);
-		tb_ticks_per_jiffy = freq / HZ;
-		tb_to_us = mulhwu_scale_factor(freq, 1000000);
-	}
-	return IRQ_HANDLED;
-}
-
-static void __init
-prep_calibrate_decr(void)
-{
-	int res;
-
-	/* Try and get this from the residual data. */
-	res = prep_res_calibrate_decr();
-
-	/* If we didn't get it from the residual data, try this. */
-	if ( res ) {
-#define TIMER0_COUNT 0x40
-#define TIMER_CONTROL 0x43
-		/* set timer to periodic mode */
-		outb_p(0x34,TIMER_CONTROL);/* binary, mode 2, LSB/MSB, ch 0 */
-		/* set the clock to ~100 Hz */
-		outb_p(LATCH & 0xff , TIMER0_COUNT);	/* LSB */
-		outb(LATCH >> 8 , TIMER0_COUNT);	/* MSB */
-
-		if (request_irq(0, prep_calibrate_decr_handler, 0, "timer", NULL) != 0)
-			panic("Could not allocate timer IRQ!");
-		local_irq_enable();
-		/* wait for calibrate */
-		while ( calibrate_steps )
-			;
-		local_irq_disable();
-		free_irq( 0, NULL);
-	}
-}
-
-static long __init
-mk48t59_init(void) {
-	unsigned char tmp;
-
-	tmp = ppc_md.nvram_read_val(MK48T59_RTC_CONTROLB);
-	if (tmp & MK48T59_RTC_CB_STOP) {
-		printk("Warning: RTC was stopped, date will be wrong.\n");
-		ppc_md.nvram_write_val(MK48T59_RTC_CONTROLB,
-					 tmp & ~MK48T59_RTC_CB_STOP);
-		/* Low frequency crystal oscillators may take a very long
-		 * time to startup and stabilize. For now just ignore the
-		 * the issue, but attempting to calibrate the decrementer
-		 * from the RTC just after this wakeup is likely to be very
-		 * inaccurate. Firmware should not allow to load
-		 * the OS with the clock stopped anyway...
-		 */
-	}
-	/* Ensure that the clock registers are updated */
-	tmp = ppc_md.nvram_read_val(MK48T59_RTC_CONTROLA);
-	tmp &= ~(MK48T59_RTC_CA_READ | MK48T59_RTC_CA_WRITE);
-	ppc_md.nvram_write_val(MK48T59_RTC_CONTROLA, tmp);
-	return 0;
-}
-
-/* We use the NVRAM RTC to time a second to calibrate the decrementer,
- * the RTC registers have just been set up in the right state by the
- * preceding routine.
- */
-static void __init
-mk48t59_calibrate_decr(void)
-{
-	unsigned long freq;
-	unsigned long t1;
-	unsigned char save_control;
-	long i;
-	unsigned char sec;
-
-	
-	/* Make sure the time is not stopped. */
-	save_control = ppc_md.nvram_read_val(MK48T59_RTC_CONTROLB);
-
-	ppc_md.nvram_write_val(MK48T59_RTC_CONTROLA,
-			(save_control & (~MK48T59_RTC_CB_STOP)));
-
-	/* Now make sure the read bit is off so the value will change. */
-	save_control = ppc_md.nvram_read_val(MK48T59_RTC_CONTROLA);
-	save_control &= ~MK48T59_RTC_CA_READ;
-	ppc_md.nvram_write_val(MK48T59_RTC_CONTROLA, save_control);
-
-
-	/* Read the seconds value to see when it changes. */
-	sec = ppc_md.nvram_read_val(MK48T59_RTC_SECONDS);
-	/* Actually this is bad for precision, we should have a loop in
-	 * which we only read the seconds counter. nvram_read_val writes
-	 * the address bytes on every call and this takes a lot of time.
-	 * Perhaps an nvram_wait_change method returning a time
-	 * stamp with a loop count as parameter would be the  solution.
-	 */
-	for (i = 0 ; i < 1000000 ; i++)	{ /* may take up to 1 second... */
-		t1 = get_tbl();
-		if (ppc_md.nvram_read_val(MK48T59_RTC_SECONDS) != sec) {
-			break;
-		}
-	}
-
-	sec = ppc_md.nvram_read_val(MK48T59_RTC_SECONDS);
-	for (i = 0 ; i < 1000000 ; i++)	{ /* Should take up 1 second... */
-		freq = get_tbl()-t1;
-		if (ppc_md.nvram_read_val(MK48T59_RTC_SECONDS) != sec)
-			break;
-	}
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		 freq/1000000, freq%1000000);
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+		todc_calibrate_decr();
 }
 
 static unsigned int __prep
@@ -1163,18 +1021,19 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.nvram_read_val = prep_nvram_read_val;
 	ppc_md.nvram_write_val = prep_nvram_write_val;
 
-	ppc_md.time_init      = NULL;
+	ppc_md.time_init      = todc_time_init;
 	if (_prep_type == _PREP_IBM) {
-		ppc_md.set_rtc_time   = mc146818_set_rtc_time;
-		ppc_md.get_rtc_time   = mc146818_get_rtc_time;
-		ppc_md.calibrate_decr = prep_calibrate_decr;
+		TODC_INIT(TODC_TYPE_MC146818, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
+				PREP_NVRAM_DATA, 8);
 	} else {
-		ppc_md.set_rtc_time   = mk48t59_set_rtc_time;
-		ppc_md.get_rtc_time   = mk48t59_get_rtc_time;
-		ppc_md.calibrate_decr = mk48t59_calibrate_decr;
-		ppc_md.time_init      = mk48t59_init;
+		TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
+				PREP_NVRAM_DATA, 8);
 	}
 
+	ppc_md.calibrate_decr = prep_calibrate_decr;
+	ppc_md.set_rtc_time   = todc_set_rtc_time;
+	ppc_md.get_rtc_time   = todc_get_rtc_time;
+
 	ppc_md.setup_io_mappings = prep_map_io;
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)

arch/ppc/platforms/spruce.h

@@ -35,11 +35,37 @@
 #define SPRUCE_MEM_SIZE		0x04000000
 #define SPRUCE_BUS_SPEED	66666667
 
-#define SPRUCE_SERIAL_1_ADDR	0xff600300
-#define SPRUCE_SERIAL_2_ADDR	0xff600400
-
 #define SPRUCE_NVRAM_BASE_ADDR	0xff800000
 #define SPRUCE_RTC_BASE_ADDR	SPRUCE_NVRAM_BASE_ADDR
 
+/*
+ * Serial port defines
+ */
+#define SPRUCE_FPGA_REG_A	0xff820000
+#define SPRUCE_UARTCLK_33M	0x02
+#define SPRUCE_UARTCLK_IS_33M(reg)	(reg & SPRUCE_UARTCLK_33M)
+
+#define UART0_IO_BASE	0xff600300
+#define UART1_IO_BASE	0xff600400
+
+#define RS_TABLE_SIZE	2
+
+#define SPRUCE_BAUD_33M	(33000000/64)
+#define SPRUCE_BAUD_30M	(30000000/64)
+#define BASE_BAUD	SPRUCE_BAUD_33M
+
+#define UART0_INT	3
+#define UART1_INT	4
+
+#define STD_UART_OP(num)				\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,		\
+		ASYNC_BOOT_AUTOCONF,			\
+		iomem_base: UART##num##_IO_BASE,	\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)
+
 #endif /* __ASM_SPRUCE_H__ */
 #endif /* __KERNEL__ */

arch/ppc/syslib/Makefile

@@ -33,7 +33,7 @@ obj-$(CONFIG_PPC_OF)		+= prom_init.o prom.o of_device.o
 obj-$(CONFIG_PPC_PMAC)		+= open_pic.o indirect_pci.o
 obj-$(CONFIG_POWER4)		+= open_pic2.o
 obj-$(CONFIG_PPC_CHRP)		+= open_pic.o indirect_pci.o i8259.o
-obj-$(CONFIG_PPC_PREP)		+= open_pic.o indirect_pci.o i8259.o
+obj-$(CONFIG_PPC_PREP)		+= open_pic.o indirect_pci.o i8259.o todc_time.o
 obj-$(CONFIG_ADIR)		+= i8259.o indirect_pci.o pci_auto.o \
 					todc_time.o
 obj-$(CONFIG_EBONY)		+= indirect_pci.o pci_auto.o todc_time.o

arch/ppc/syslib/ppc4xx_setup.c

@@ -170,7 +170,7 @@ ppc4xx_calibrate_decr(void)
 	unsigned int freq;
 	bd_t *bip = &__res;
 
-#if defined(CONFIG_WALNUT) || defined(CONFIG_CEDER)|| defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
+#if defined(CONFIG_WALNUT) || defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
 	/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
 	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
 #endif

arch/ppc64/boot/zlib.c

@@ -102,9 +102,8 @@ extern char *z_errmsg[]; /* indexed by 1-zlib_error */
 
          /* functions */
 
-#include <linux/string.h>
+extern void *memcpy(void *, const void *, unsigned long);
 #define zmemcpy memcpy
-#define zmemzero(dest, len)	memset(dest, 0, len)
 
 /* Diagnostic functions */
 #ifdef DEBUG_ZLIB