Merge tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linux

Pull Xtensa updates from Chris Zankel.

* tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linux:
  xtensa: Fix broken allmodconfig build
  xtensa: remove CCOUNT_PER_JIFFY
  xtensa: fix !CONFIG_XTENSA_CALIBRATE_CCOUNT build failure
  xtensa: don't use echo -e needlessly
  xtensa: new fast_alloca handler
  xtensa: keep a3 and excsave1 on entry to exception handlers
  xtensa: enable kernel preemption
  xtensa: check thread flags atomically on return from user exception

arch/xtensa/Makefile

@@ -55,10 +55,10 @@ ifneq ($(CONFIG_LD_NO_RELAX),)
 LDFLAGS := --no-relax
 endif
 
-ifeq ($(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
+ifeq ($(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
 CHECKFLAGS += -D__XTENSA_EB__
 endif
-ifeq ($(shell echo -e __XTENSA_EL__ | $(CC) -E - | grep -v "\#"),1)
+ifeq ($(shell echo __XTENSA_EL__ | $(CC) -E - | grep -v "\#"),1)
 CHECKFLAGS += -D__XTENSA_EL__
 endif
 

arch/xtensa/boot/Makefile

@@ -12,7 +12,7 @@
 KBUILD_CFLAGS	+= -fno-builtin -Iarch/$(ARCH)/boot/include
 HOSTFLAGS	+= -Iarch/$(ARCH)/boot/include
 
-BIG_ENDIAN	:= $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
+BIG_ENDIAN	:= $(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
 
 export ccflags-y
 export BIG_ENDIAN

arch/xtensa/include/asm/regs.h

@@ -82,6 +82,7 @@
 #define PS_CALLINC_SHIFT	16
 #define PS_CALLINC_MASK		0x00030000
 #define PS_OWB_SHIFT		8
+#define PS_OWB_WIDTH		4
 #define PS_OWB_MASK		0x00000F00
 #define PS_RING_SHIFT		6
 #define PS_RING_MASK		0x000000C0

arch/xtensa/include/asm/timex.h

@@ -35,13 +35,7 @@
 # error "Bad timer number for Linux configurations!"
 #endif
 
-#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 extern unsigned long ccount_freq;
-#define CCOUNT_PER_JIFFY (ccount_freq / HZ)
-#else
-#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
-#endif
-
 
 typedef unsigned long long cycles_t;
 

arch/xtensa/kernel/align.S

@@ -146,9 +146,9 @@
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -171,7 +171,6 @@ ENTRY(fast_unaligned)
 	s32i	a8, a2, PT_AREG8
 
 	rsr	a0, depc
-	xsr	a3, excsave1
 	s32i	a0, a2, PT_AREG2
 	s32i	a3, a2, PT_AREG3
 

arch/xtensa/kernel/coprocessor.S

@@ -32,9 +32,9 @@
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -225,9 +225,9 @@ ENDPROC(coprocessor_restore)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -245,7 +245,6 @@ ENTRY(fast_coprocessor)
 
 	/* Save remaining registers a1-a3 and SAR */
 
-	xsr	a3, excsave1
 	s32i	a3, a2, PT_AREG3
 	rsr	a3, sar
 	s32i	a1, a2, PT_AREG1

arch/xtensa/kernel/entry.S

@@ -31,8 +31,6 @@
 /* Unimplemented features. */
 
 #undef KERNEL_STACK_OVERFLOW_CHECK
-#undef PREEMPTIBLE_KERNEL
-#undef ALLOCA_EXCEPTION_IN_IRAM
 
 /* Not well tested.
  *
@@ -92,9 +90,9 @@
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original value in depc
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave1:	a3
+ *   excsave1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -110,9 +108,8 @@
 
 ENTRY(user_exception)
 
-	/* Save a2, a3, and depc, restore excsave_1 and set SP. */
+	/* Save a1, a2, a3, and set SP. */
 
-	xsr	a3, excsave1
 	rsr	a0, depc
 	s32i	a1, a2, PT_AREG1
 	s32i	a0, a2, PT_AREG2
@@ -238,9 +235,9 @@ ENDPROC(user_exception)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -256,9 +253,8 @@ ENDPROC(user_exception)
 
 ENTRY(kernel_exception)
 
-	/* Save a0, a2, a3, DEPC and set SP. */
+	/* Save a1, a2, a3, and set SP. */
 
-	xsr	a3, excsave1		# restore a3, excsave_1
 	rsr	a0, depc		# get a2
 	s32i	a1, a2, PT_AREG1
 	s32i	a0, a2, PT_AREG2
@@ -409,7 +405,7 @@ common_exception:
 	 * exception handler and call the exception handler.
 	 */
 
-	movi	a4, exc_table
+	rsr	a4, excsave1
 	mov	a6, a1			# pass stack frame
 	mov	a7, a0			# pass EXCCAUSE
 	addx4	a4, a0, a4
@@ -423,28 +419,15 @@ common_exception:
 	.global common_exception_return
 common_exception_return:
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	l32i	a4, a1, PT_DEPC
-	/* Double exception means we came here with an exception
-	 * while PS.EXCM was set, i.e. interrupts disabled.
-	 */
-	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
-	l32i	a4, a1, PT_EXCCAUSE
-	bnei	a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f
-	/* We came here with an interrupt means interrupts were enabled
-	 * and we'll reenable them on return.
-	 */
-	movi	a4, trace_hardirqs_on
-	callx4	a4
 1:
-#endif
+	rsil	a2, LOCKLEVEL
 
 	/* Jump if we are returning from kernel exceptions. */
 
-1:	l32i	a3, a1, PT_PS
-	_bbci.l	a3, PS_UM_BIT, 4f
-
-	rsil	a2, 0
+	l32i	a3, a1, PT_PS
+	GET_THREAD_INFO(a2, a1)
+	l32i	a4, a2, TI_FLAGS
+	_bbci.l	a3, PS_UM_BIT, 6f
 
 	/* Specific to a user exception exit:
 	 * We need to check some flags for signal handling and rescheduling,
@@ -453,9 +436,6 @@ common_exception_return:
 	 * Note that we don't disable interrupts here. 
 	 */
 
-	GET_THREAD_INFO(a2,a1)
-	l32i	a4, a2, TI_FLAGS
-
 	_bbsi.l	a4, TIF_NEED_RESCHED, 3f
 	_bbsi.l	a4, TIF_NOTIFY_RESUME, 2f
 	_bbci.l	a4, TIF_SIGPENDING, 5f
@@ -465,6 +445,7 @@ common_exception_return:
 
 	/* Call do_signal() */
 
+	rsil	a2, 0
 	movi	a4, do_notify_resume	# int do_notify_resume(struct pt_regs*)
 	mov	a6, a1
 	callx4	a4
@@ -472,10 +453,24 @@ common_exception_return:
 
 3:	/* Reschedule */
 
+	rsil	a2, 0
 	movi	a4, schedule	# void schedule (void)
 	callx4	a4
 	j	1b
 
+#ifdef CONFIG_PREEMPT
+6:
+	_bbci.l	a4, TIF_NEED_RESCHED, 4f
+
+	/* Check current_thread_info->preempt_count */
+
+	l32i	a4, a2, TI_PRE_COUNT
+	bnez	a4, 4f
+	movi	a4, preempt_schedule_irq
+	callx4	a4
+	j	1b
+#endif
+
 5:
 #ifdef CONFIG_DEBUG_TLB_SANITY
 	l32i	a4, a1, PT_DEPC
@@ -483,7 +478,24 @@ common_exception_return:
 	movi	a4, check_tlb_sanity
 	callx4	a4
 #endif
-4:	/* Restore optional registers. */
+6:
+4:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	l32i	a4, a1, PT_DEPC
+	/* Double exception means we came here with an exception
+	 * while PS.EXCM was set, i.e. interrupts disabled.
+	 */
+	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+	l32i	a4, a1, PT_EXCCAUSE
+	bnei	a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f
+	/* We came here with an interrupt means interrupts were enabled
+	 * and we'll reenable them on return.
+	 */
+	movi	a4, trace_hardirqs_on
+	callx4	a4
+1:
+#endif
+	/* Restore optional registers. */
 
 	load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
 
@@ -570,29 +582,6 @@ user_exception_exit:
 
 kernel_exception_exit:
 
-#ifdef PREEMPTIBLE_KERNEL
-
-#ifdef CONFIG_PREEMPT
-
-	/*
-	 * Note: We've just returned from a call4, so we have
-	 * at least 4 addt'l regs.
-	 */
-
-	/* Check current_thread_info->preempt_count */
-
-	GET_THREAD_INFO(a2)
-	l32i	a3, a2, TI_PREEMPT
-	bnez	a3, 1f
-
-	l32i	a2, a2, TI_FLAGS
-
-1:
-
-#endif
-
-#endif
-
 	/* Check if we have to do a movsp.
 	 *
 	 * We only have to do a movsp if the previous window-frame has
@@ -829,176 +818,63 @@ ENDPROC(unrecoverable_exception)
  *
  *  The ALLOCA handler is entered when user code executes the MOVSP
  *  instruction and the caller's frame is not in the register file.
- *  In this case, the caller frame's a0..a3 are on the stack just
- *  below sp (a1), and this handler moves them.
  *
- *  For "MOVSP <ar>,<as>" without destination register a1, this routine
- *  simply moves the value from <as> to <ar> without moving the save area.
+ * This algorithm was taken from the Ross Morley's RTOS Porting Layer:
+ *
+ *    /home/ross/rtos/porting/XtensaRTOS-PortingLayer-20090507/xtensa_vectors.S
+ *
+ * It leverages the existing window spill/fill routines and their support for
+ * double exceptions. The 'movsp' instruction will only cause an exception if
+ * the next window needs to be loaded. In fact this ALLOCA exception may be
+ * replaced at some point by changing the hardware to do a underflow exception
+ * of the proper size instead.
+ *
+ * This algorithm simply backs out the register changes started by the user
+ * excpetion handler, makes it appear that we have started a window underflow
+ * by rotating the window back and then setting the old window base (OWB) in
+ * the 'ps' register with the rolled back window base. The 'movsp' instruction
+ * will be re-executed and this time since the next window frames is in the
+ * active AR registers it won't cause an exception.
+ *
+ * If the WindowUnderflow code gets a TLB miss the page will get mapped
+ * the the partial windeowUnderflow will be handeled in the double exception
+ * handler.
  *
  * Entry condition:
  *
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
  */
 
-#if XCHAL_HAVE_BE
-#define _EXTUI_MOVSP_SRC(ar)	extui ar, ar, 4, 4
-#define _EXTUI_MOVSP_DST(ar)	extui ar, ar, 0, 4
-#else
-#define _EXTUI_MOVSP_SRC(ar)	extui ar, ar, 0, 4
-#define _EXTUI_MOVSP_DST(ar)	extui ar, ar, 4, 4
-#endif
-
 ENTRY(fast_alloca)
+	rsr	a0, windowbase
+	rotw	-1
+	rsr	a2, ps
+	extui	a3, a2, PS_OWB_SHIFT, PS_OWB_WIDTH
+	xor	a3, a3, a4
+	l32i	a4, a6, PT_AREG0
+	l32i	a1, a6, PT_DEPC
+	rsr	a6, depc
+	wsr	a1, depc
+	slli	a3, a3, PS_OWB_SHIFT
+	xor	a2, a2, a3
+	wsr	a2, ps
+	rsync
 
-	/* We shouldn't be in a double exception. */
-
-	l32i	a0, a2, PT_DEPC
-	_bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double
-
-	rsr	a0, depc		# get a2
-	s32i	a4, a2, PT_AREG4	# save a4 and
-	s32i	a0, a2, PT_AREG2	# a2 to stack
-
-	/* Exit critical section. */
-
-	movi	a0, 0
-	s32i	a0, a3, EXC_TABLE_FIXUP
-
-	/* Restore a3, excsave_1 */
-
-	xsr	a3, excsave1		# make sure excsave_1 is valid for dbl.
-	rsr	a4, epc1		# get exception address
-	s32i	a3, a2, PT_AREG3	# save a3 to stack
-
-#ifdef ALLOCA_EXCEPTION_IN_IRAM
-#error	iram not supported
-#else
-	/* Note: l8ui not allowed in IRAM/IROM!! */
-	l8ui	a0, a4, 1		# read as(src) from MOVSP instruction
-#endif
-	movi	a3, .Lmovsp_src
-	_EXTUI_MOVSP_SRC(a0)		# extract source register number
-	addx8	a3, a0, a3
-	jx	a3
-
-.Lunhandled_double:
-	wsr	a0, excsave1
-	movi	a0, unrecoverable_exception
-	callx0	a0
-
-	.align 8
-.Lmovsp_src:
-	l32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
-	mov	a3, a1;			_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
-	mov	a3, a5;			_j 1f;	.align 8
-	mov	a3, a6;			_j 1f;	.align 8
-	mov	a3, a7;			_j 1f;	.align 8
-	mov	a3, a8;			_j 1f;	.align 8
-	mov	a3, a9;			_j 1f;	.align 8
-	mov	a3, a10;		_j 1f;	.align 8
-	mov	a3, a11;		_j 1f;	.align 8
-	mov	a3, a12;		_j 1f;	.align 8
-	mov	a3, a13;		_j 1f;	.align 8
-	mov	a3, a14;		_j 1f;	.align 8
-	mov	a3, a15;		_j 1f;	.align 8
-
-1:
-
-#ifdef ALLOCA_EXCEPTION_IN_IRAM
-#error	iram not supported
-#else
-	l8ui	a0, a4, 0		# read ar(dst) from MOVSP instruction
-#endif
-	addi	a4, a4, 3		# step over movsp
-	_EXTUI_MOVSP_DST(a0)		# extract destination register
-	wsr	a4, epc1		# save new epc_1
-
-	_bnei	a0, 1, 1f		# no 'movsp a1, ax': jump
-
-	/* Move the save area. This implies the use of the L32E
-	 * and S32E instructions, because this move must be done with
-	 * the user's PS.RING privilege levels, not with ring 0
-	 * (kernel's) privileges currently active with PS.EXCM
-	 * set. Note that we have stil registered a fixup routine with the
-	 * double exception vector in case a double exception occurs.
-	 */
-
-	/* a0,a4:avail a1:old user stack a2:exc. stack a3:new user stack. */
-
-	l32e	a0, a1, -16
-	l32e	a4, a1, -12
-	s32e	a0, a3, -16
-	s32e	a4, a3, -12
-	l32e	a0, a1, -8
-	l32e	a4, a1, -4
-	s32e	a0, a3, -8
-	s32e	a4, a3, -4
-
-	/* Restore stack-pointer and all the other saved registers. */
-
-	mov	a1, a3
-
-	l32i	a4, a2, PT_AREG4
-	l32i	a3, a2, PT_AREG3
-	l32i	a0, a2, PT_AREG0
-	l32i	a2, a2, PT_AREG2
-	rfe
-
-	/*  MOVSP <at>,<as>  was invoked with <at> != a1.
-	 *  Because the stack pointer is not being modified,
-	 *  we should be able to just modify the pointer
-	 *  without moving any save area.
-	 *  The processor only traps these occurrences if the
-	 *  caller window isn't live, so unfortunately we can't
-	 *  use this as an alternate trap mechanism.
-	 *  So we just do the move.  This requires that we
-	 *  resolve the destination register, not just the source,
-	 *  so there's some extra work.
-	 *  (PERHAPS NOT REALLY NEEDED, BUT CLEANER...)
-	 */
-
-	/* a0 dst-reg, a1 user-stack, a2 stack, a3 value of src reg. */
-
-1:	movi	a4, .Lmovsp_dst
-	addx8	a4, a0, a4
-	jx	a4
-
-	.align 8
-.Lmovsp_dst:
-	s32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
-	mov	a1, a3;			_j 1f;	.align 8
-	s32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
-	s32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
-	s32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
-	mov	a5, a3;			_j 1f;	.align 8
-	mov	a6, a3;			_j 1f;	.align 8
-	mov	a7, a3;			_j 1f;	.align 8
-	mov	a8, a3;			_j 1f;	.align 8
-	mov	a9, a3;			_j 1f;	.align 8
-	mov	a10, a3;		_j 1f;	.align 8
-	mov	a11, a3;		_j 1f;	.align 8
-	mov	a12, a3;		_j 1f;	.align 8
-	mov	a13, a3;		_j 1f;	.align 8
-	mov	a14, a3;		_j 1f;	.align 8
-	mov	a15, a3;		_j 1f;	.align 8
-
-1:	l32i	a4, a2, PT_AREG4
-	l32i	a3, a2, PT_AREG3
-	l32i	a0, a2, PT_AREG0
-	l32i	a2, a2, PT_AREG2
-	rfe
-
+	_bbci.l	a4, 31, 4f
+	rotw	-1
+	_bbci.l	a8, 30, 8f
+	rotw	-1
+	j	_WindowUnderflow12
+8:	j	_WindowUnderflow8
+4:	j	_WindowUnderflow4
 ENDPROC(fast_alloca)
 
 /*
@@ -1015,9 +891,9 @@ ENDPROC(fast_alloca)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  */
 
 ENTRY(fast_syscall_kernel)
@@ -1064,7 +940,6 @@ ENTRY(fast_syscall_unrecoverable)
 
 	l32i    a0, a2, PT_AREG0        # restore a0
 	xsr     a2, depc                # restore a2, depc
-	rsr     a3, excsave1
 
 	wsr     a0, excsave1
 	movi    a0, unrecoverable_exception
@@ -1086,10 +961,10 @@ ENDPROC(fast_syscall_unrecoverable)
  *   a0:	a2 (syscall-nr), original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in a0 and DEPC
- *   a3:	dispatch table, original in excsave_1
+ *   a3:	a3
  *   a4..a15:	unchanged
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -1122,8 +997,6 @@ ENDPROC(fast_syscall_unrecoverable)
 
 ENTRY(fast_syscall_xtensa)
 
-	xsr	a3, excsave1		# restore a3, excsave1
-
 	s32i	a7, a2, PT_AREG7	# we need an additional register
 	movi	a7, 4			# sizeof(unsigned int)
 	access_ok a3, a7, a0, a2, .Leac	# a0: scratch reg, a2: sp
@@ -1186,9 +1059,9 @@ ENDPROC(fast_syscall_xtensa)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
  */
@@ -1197,15 +1070,16 @@ ENTRY(fast_syscall_spill_registers)
 
 	/* Register a FIXUP handler (pass current wb as a parameter) */
 
+	xsr	a3, excsave1
 	movi	a0, fast_syscall_spill_registers_fixup
 	s32i	a0, a3, EXC_TABLE_FIXUP
 	rsr	a0, windowbase
 	s32i	a0, a3, EXC_TABLE_PARAM
+	xsr	a3, excsave1		# restore a3 and excsave_1
 
-	/* Save a3 and SAR on stack. */
+	/* Save a3, a4 and SAR on stack. */
 
 	rsr	a0, sar
-	xsr	a3, excsave1		# restore a3 and excsave_1
 	s32i	a3, a2, PT_AREG3
 	s32i	a4, a2, PT_AREG4
 	s32i	a0, a2, PT_AREG5	# store SAR to PT_AREG5
@@ -1259,14 +1133,14 @@ fast_syscall_spill_registers_fixup:
 	 * in WS, so that the exception handlers save them to the task stack.
 	 */
 
-	rsr	a3, excsave1	# get spill-mask
+	xsr	a3, excsave1	# get spill-mask
 	slli	a2, a3, 1	# shift left by one
 
 	slli	a3, a2, 32-WSBITS
 	src	a2, a2, a3	# a1 = xxwww1yyxxxwww1yy......
 	wsr	a2, windowstart	# set corrected windowstart
 
-	movi	a3, exc_table
+	rsr	a3, excsave1
 	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE	# restore a2
 	l32i	a3, a3, EXC_TABLE_PARAM	# original WB (in user task)
 
@@ -1303,7 +1177,7 @@ fast_syscall_spill_registers_fixup:
 
 	/* Jump to the exception handler. */
 
-	movi	a3, exc_table
+	rsr	a3, excsave1
 	rsr	a0, exccause
 	addx4	a0, a0, a3              	# find entry in table
 	l32i	a0, a0, EXC_TABLE_FAST_USER     # load handler
@@ -1320,6 +1194,7 @@ fast_syscall_spill_registers_fixup_return:
 	xsr	a3, excsave1
 	movi	a2, fast_syscall_spill_registers_fixup
 	s32i	a2, a3, EXC_TABLE_FIXUP
+	s32i	a0, a3, EXC_TABLE_DOUBLE_SAVE
 	rsr	a2, windowbase
 	s32i	a2, a3, EXC_TABLE_PARAM
 	l32i	a2, a3, EXC_TABLE_KSTK
@@ -1331,11 +1206,6 @@ fast_syscall_spill_registers_fixup_return:
 	wsr	a3, windowbase
 	rsync
 
-	/* Restore a3 and return. */
-
-	movi	a3, exc_table
-	xsr	a3, excsave1
-
 	rfde
 
 
@@ -1522,9 +1392,8 @@ ENTRY(_spill_registers)
 
 	movi	a0, 0
 
-	movi	a3, exc_table
+	rsr	a3, excsave1
 	l32i	a1, a3, EXC_TABLE_KSTK
-	wsr	a3, excsave1
 
 	movi	a4, (1 << PS_WOE_BIT) | LOCKLEVEL
 	wsr	a4, ps
@@ -1568,9 +1437,9 @@ ENDPROC(fast_second_level_miss_double_kernel)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -1578,9 +1447,10 @@ ENDPROC(fast_second_level_miss_double_kernel)
 
 ENTRY(fast_second_level_miss)
 
-	/* Save a1. Note: we don't expect a double exception. */
+	/* Save a1 and a3. Note: we don't expect a double exception. */
 
 	s32i	a1, a2, PT_AREG1
+	s32i	a3, a2, PT_AREG3
 
 	/* We need to map the page of PTEs for the user task.  Find
 	 * the pointer to that page.  Also, it's possible for tsk->mm
@@ -1602,9 +1472,6 @@ ENTRY(fast_second_level_miss)
 	l32i	a0, a1, TASK_MM		# tsk->mm
 	beqz	a0, 9f
 
-
-	/* We deliberately destroy a3 that holds the exception table. */
-
 8:	rsr	a3, excvaddr		# fault address
 	_PGD_OFFSET(a0, a3, a1)
 	l32i	a0, a0, 0		# read pmdval
@@ -1655,7 +1522,7 @@ ENTRY(fast_second_level_miss)
 
 	/* Exit critical section. */
 
-4:	movi	a3, exc_table		# restore a3
+4:	rsr	a3, excsave1
 	movi	a0, 0
 	s32i	a0, a3, EXC_TABLE_FIXUP
 
@@ -1663,8 +1530,8 @@ ENTRY(fast_second_level_miss)
 
 	l32i	a0, a2, PT_AREG0
 	l32i	a1, a2, PT_AREG1
+	l32i	a3, a2, PT_AREG3
 	l32i	a2, a2, PT_DEPC
-	xsr	a3, excsave1
 
 	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
 
@@ -1751,11 +1618,8 @@ ENTRY(fast_second_level_miss)
 
 2:	/* Invalid PGD, default exception handling */
 
-	movi	a3, exc_table
 	rsr	a1, depc
-	xsr	a3, excsave1
 	s32i	a1, a2, PT_AREG2
-	s32i	a3, a2, PT_AREG3
 	mov	a1, a2
 
 	rsr	a2, ps
@@ -1775,9 +1639,9 @@ ENDPROC(fast_second_level_miss)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -1785,17 +1649,17 @@ ENDPROC(fast_second_level_miss)
 
 ENTRY(fast_store_prohibited)
 
-	/* Save a1 and a4. */
+	/* Save a1 and a3. */
 
 	s32i	a1, a2, PT_AREG1
-	s32i	a4, a2, PT_AREG4
+	s32i	a3, a2, PT_AREG3
 
 	GET_CURRENT(a1,a2)
 	l32i	a0, a1, TASK_MM		# tsk->mm
 	beqz	a0, 9f
 
 8:	rsr	a1, excvaddr		# fault address
-	_PGD_OFFSET(a0, a1, a4)
+	_PGD_OFFSET(a0, a1, a3)
 	l32i	a0, a0, 0
 	beqz	a0, 2f
 
@@ -1804,39 +1668,37 @@ ENTRY(fast_store_prohibited)
 	 * and is not PAGE_NONE. See pgtable.h for possible PTE layouts.
 	 */
 
-	_PTE_OFFSET(a0, a1, a4)
-	l32i	a4, a0, 0		# read pteval
+	_PTE_OFFSET(a0, a1, a3)
+	l32i	a3, a0, 0		# read pteval
 	movi	a1, _PAGE_CA_INVALID
-	ball	a4, a1, 2f
-	bbci.l	a4, _PAGE_WRITABLE_BIT, 2f
+	ball	a3, a1, 2f
+	bbci.l	a3, _PAGE_WRITABLE_BIT, 2f
 
 	movi	a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
-	or	a4, a4, a1
+	or	a3, a3, a1
 	rsr	a1, excvaddr
-	s32i	a4, a0, 0
+	s32i	a3, a0, 0
 
 	/* We need to flush the cache if we have page coloring. */
 #if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
 	dhwb	a0, 0
 #endif
 	pdtlb	a0, a1
-	wdtlb	a4, a0
+	wdtlb	a3, a0
 
 	/* Exit critical section. */
 
 	movi	a0, 0
+	rsr	a3, excsave1
 	s32i	a0, a3, EXC_TABLE_FIXUP
 
 	/* Restore the working registers, and return. */
 
-	l32i	a4, a2, PT_AREG4
+	l32i	a3, a2, PT_AREG3
 	l32i	a1, a2, PT_AREG1
 	l32i	a0, a2, PT_AREG0
 	l32i	a2, a2, PT_DEPC
 
-	/* Restore excsave1 and a3. */
-
-	xsr	a3, excsave1
 	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
 
 	rsr	a2, depc
@@ -1853,11 +1715,8 @@ ENTRY(fast_store_prohibited)
 
 2:	/* If there was a problem, handle fault in C */
 
-	rsr	a4, depc	# still holds a2
-	xsr	a3, excsave1
-	s32i	a4, a2, PT_AREG2
-	s32i	a3, a2, PT_AREG3
-	l32i	a4, a2, PT_AREG4
+	rsr	a3, depc	# still holds a2
+	s32i	a3, a2, PT_AREG2
 	mov	a1, a2
 
 	rsr	a2, ps

arch/xtensa/kernel/setup.c

@@ -584,8 +584,8 @@ c_show(struct seq_file *f, void *slot)
 		     "bogomips\t: %lu.%02lu\n",
 		     XCHAL_BUILD_UNIQUE_ID,
 		     XCHAL_HAVE_BE ?  "big" : "little",
-		     CCOUNT_PER_JIFFY/(1000000/HZ),
-		     (CCOUNT_PER_JIFFY/(10000/HZ)) % 100,
+		     ccount_freq/1000000,
+		     (ccount_freq/10000) % 100,
 		     loops_per_jiffy/(500000/HZ),
 		     (loops_per_jiffy/(5000/HZ)) % 100);
 

arch/xtensa/kernel/time.c

@@ -29,9 +29,7 @@
 #include <asm/timex.h>
 #include <asm/platform.h>
 
-#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 unsigned long ccount_freq;		/* ccount Hz */
-#endif
 
 static cycle_t ccount_read(struct clocksource *cs)
 {
@@ -129,8 +127,10 @@ void __init time_init(void)
 	platform_calibrate_ccount();
 	printk("%d.%02d MHz\n", (int)ccount_freq/1000000,
 			(int)(ccount_freq/10000)%100);
+#else
+	ccount_freq = CONFIG_XTENSA_CPU_CLOCK*1000000UL;
 #endif
-	clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ);
+	clocksource_register_hz(&ccount_clocksource, ccount_freq);
 
 	ccount_timer.evt.cpumask = cpumask_of(0);
 	ccount_timer.evt.irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
@@ -164,7 +164,7 @@ irqreturn_t timer_interrupt (int irq, void *dev_id)
 #ifndef CONFIG_GENERIC_CALIBRATE_DELAY
 void calibrate_delay(void)
 {
-	loops_per_jiffy = CCOUNT_PER_JIFFY;
+	loops_per_jiffy = ccount_freq / HZ;
 	printk("Calibrating delay loop (skipped)... "
 	       "%lu.%02lu BogoMIPS preset\n",
 	       loops_per_jiffy/(1000000/HZ),

arch/xtensa/kernel/vectors.S

@@ -78,6 +78,7 @@ ENTRY(_UserExceptionVector)
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
 	addx4	a0, a0, a3		# find entry in table
 	l32i	a0, a0, EXC_TABLE_FAST_USER	# load handler
+	xsr	a3, excsave1		# restore a3 and dispatch table
 	jx	a0
 
 ENDPROC(_UserExceptionVector)
@@ -104,6 +105,7 @@ ENTRY(_KernelExceptionVector)
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
 	addx4	a0, a0, a3		# find entry in table
 	l32i	a0, a0, EXC_TABLE_FAST_KERNEL	# load handler address
+	xsr	a3, excsave1		# restore a3 and dispatch table
 	jx	a0
 
 ENDPROC(_KernelExceptionVector)
@@ -168,7 +170,7 @@ ENDPROC(_KernelExceptionVector)
  *
  *	a0:	   DEPC
  *	a1: 	   a1
- *	a2:	   trashed, original value in EXC_TABLE_DOUBLE_A2
+ *	a2:	   trashed, original value in EXC_TABLE_DOUBLE_SAVE
  *	a3:	   exctable
  *	depc:	   a0
  *	excsave_1: a3
@@ -204,47 +206,46 @@ ENDPROC(_KernelExceptionVector)
 
 	.section .DoubleExceptionVector.text, "ax"
 	.begin literal_prefix .DoubleExceptionVector
+	.globl _DoubleExceptionVector_WindowUnderflow
+	.globl _DoubleExceptionVector_WindowOverflow
 
 ENTRY(_DoubleExceptionVector)
 
-	/* Deliberately destroy excsave (don't assume it's value was valid). */
-
-	wsr	a3, excsave1		# save a3
+	xsr	a3, excsave1
+	s32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
 
 	/* Check for kernel double exception (usually fatal). */
 
-	rsr	a3, ps
-	_bbci.l	a3, PS_UM_BIT, .Lksp
+	rsr	a2, ps
+	_bbci.l	a2, PS_UM_BIT, .Lksp
 
 	/* Check if we are currently handling a window exception. */
 	/* Note: We don't need to indicate that we enter a critical section. */
 
 	xsr	a0, depc		# get DEPC, save a0
 
-	movi	a3, WINDOW_VECTORS_VADDR
-	_bltu	a0, a3, .Lfixup
-	addi	a3, a3, WINDOW_VECTORS_SIZE
-	_bgeu	a0, a3, .Lfixup
+	movi	a2, WINDOW_VECTORS_VADDR
+	_bltu	a0, a2, .Lfixup
+	addi	a2, a2, WINDOW_VECTORS_SIZE
+	_bgeu	a0, a2, .Lfixup
 
 	/* Window overflow/underflow exception. Get stack pointer. */
 
-	mov	a3, a2
-	/* This explicit literal and the following references to it are made
-	 * in order to fit DoubleExceptionVector.literals into the available
-	 * 16-byte gap before DoubleExceptionVector.text in the absence of
-	 * link time relaxation. See kernel/vmlinux.lds.S
-	 */
-	.literal .Lexc_table, exc_table
-	l32r	a2, .Lexc_table
-	l32i	a2, a2, EXC_TABLE_KSTK
+	l32i	a2, a3, EXC_TABLE_KSTK
 
 	/* Check for overflow/underflow exception, jump if overflow. */
 
-	_bbci.l	a0, 6, .Lovfl
-
-	/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3  */
+	_bbci.l	a0, 6, _DoubleExceptionVector_WindowOverflow
 
-	/* Restart window underflow exception.
+	/*
+	 * Restart window underflow exception.
+	 * Currently:
+	 *	depc = orig a0,
+	 *	a0 = orig DEPC,
+	 *	a2 = new sp based on KSTK from exc_table
+	 *	a3 = excsave_1
+	 *	excsave_1 = orig a3
+	 *
 	 * We return to the instruction in user space that caused the window
 	 * underflow exception. Therefore, we change window base to the value
 	 * before we entered the window underflow exception and prepare the
@@ -252,10 +253,11 @@ ENTRY(_DoubleExceptionVector)
 	 * by changing depc (in a0).
 	 * Note: We can trash the current window frame (a0...a3) and depc!
 	 */
-
+_DoubleExceptionVector_WindowUnderflow:
+	xsr	a3, excsave1
 	wsr	a2, depc		# save stack pointer temporarily
 	rsr	a0, ps
-	extui	a0, a0, PS_OWB_SHIFT, 4
+	extui	a0, a0, PS_OWB_SHIFT, PS_OWB_WIDTH
 	wsr	a0, windowbase
 	rsync
 
@@ -263,28 +265,57 @@ ENTRY(_DoubleExceptionVector)
 
 	xsr	a2, depc		# save a2 and get stack pointer
 	s32i	a0, a2, PT_AREG0
-
-	wsr	a3, excsave1		# save a3
-	l32r	a3, .Lexc_table
-
+	xsr	a3, excsave1
 	rsr	a0, exccause
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
 	addx4	a0, a0, a3
+	xsr	a3, excsave1
 	l32i	a0, a0, EXC_TABLE_FAST_USER
 	jx	a0
 
-.Lfixup:/* Check for a fixup handler or if we were in a critical section. */
+	/*
+	 * We only allow the ITLB miss exception if we are in kernel space.
+	 * All other exceptions are unexpected and thus unrecoverable!
+	 */
+
+#ifdef CONFIG_MMU
+	.extern fast_second_level_miss_double_kernel
+
+.Lksp:	/* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
+
+	rsr	a3, exccause
+	beqi	a3, EXCCAUSE_ITLB_MISS, 1f
+	addi	a3, a3, -EXCCAUSE_DTLB_MISS
+	bnez	a3, .Lunrecoverable
+1:	movi	a3, fast_second_level_miss_double_kernel
+	jx	a3
+#else
+.equ	.Lksp,	.Lunrecoverable
+#endif
+
+	/* Critical! We can't handle this situation. PANIC! */
 
-	/* a0: depc, a1: a1, a2: a2, a3: trashed, depc: a0, excsave1: a3 */
+	.extern unrecoverable_exception
 
-	l32r	a3, .Lexc_table
-	s32i	a2, a3, EXC_TABLE_DOUBLE_SAVE	# temporary variable
+.Lunrecoverable_fixup:
+	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
+	xsr	a0, depc
+
+.Lunrecoverable:
+	rsr	a3, excsave1
+	wsr	a0, excsave1
+	movi	a0, unrecoverable_exception
+	callx0	a0
+
+.Lfixup:/* Check for a fixup handler or if we were in a critical section. */
+
+	/* a0: depc, a1: a1, a2: trash, a3: exctable, depc: a0, excsave1: a3 */
 
 	/* Enter critical section. */
 
 	l32i	a2, a3, EXC_TABLE_FIXUP
 	s32i	a3, a3, EXC_TABLE_FIXUP
-	beq	a2, a3, .Lunrecoverable_fixup	# critical!
+	beq	a2, a3, .Lunrecoverable_fixup	# critical section
 	beqz	a2, .Ldflt			# no handler was registered
 
 	/* a0: depc, a1: a1, a2: trash, a3: exctable, depc: a0, excsave: a3 */
@@ -293,58 +324,145 @@ ENTRY(_DoubleExceptionVector)
 
 .Ldflt:	/* Get stack pointer. */
 
-	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
-	addi	a2, a3, -PT_USER_SIZE
-
-.Lovfl:	/* Jump to default handlers. */
+	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
+	addi	a2, a2, -PT_USER_SIZE
 
-	/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */
+	/* a0: depc, a1: a1, a2: kstk, a3: exctable, depc: a0, excsave: a3 */
 
-	xsr	a3, depc
 	s32i	a0, a2, PT_DEPC
-	s32i	a3, a2, PT_AREG0
+	l32i	a0, a3, EXC_TABLE_DOUBLE_SAVE
+	xsr	a0, depc
+	s32i	a0, a2, PT_AREG0
 
-	/* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */
+	/* a0: avail, a1: a1, a2: kstk, a3: exctable, depc: a2, excsave: a3 */
 
-	l32r	a3, .Lexc_table
 	rsr	a0, exccause
 	addx4	a0, a0, a3
+	xsr	a3, excsave1
 	l32i	a0, a0, EXC_TABLE_FAST_USER
 	jx	a0
 
 	/*
-	 * We only allow the ITLB miss exception if we are in kernel space.
-	 * All other exceptions are unexpected and thus unrecoverable!
+	 * Restart window OVERFLOW exception.
+	 * Currently:
+	 *	depc = orig a0,
+	 *	a0 = orig DEPC,
+	 *	a2 = new sp based on KSTK from exc_table
+	 *	a3 = EXCSAVE_1
+	 *	excsave_1 = orig a3
+	 *
+	 * We return to the instruction in user space that caused the window
+	 * overflow exception. Therefore, we change window base to the value
+	 * before we entered the window overflow exception and prepare the
+	 * registers to return as if we were coming from a regular exception
+	 * by changing DEPC (in a0).
+	 *
+	 * NOTE: We CANNOT trash the current window frame (a0...a3), but we
+	 * can clobber depc.
+	 *
+	 * The tricky part here is that overflow8 and overflow12 handlers
+	 * save a0, then clobber a0.  To restart the handler, we have to restore
+	 * a0 if the double exception was past the point where a0 was clobbered.
+	 *
+	 * To keep things simple, we take advantage of the fact all overflow
+	 * handlers save a0 in their very first instruction.  If DEPC was past
+	 * that instruction, we can safely restore a0 from where it was saved
+	 * on the stack.
+	 *
+	 * a0: depc, a1: a1, a2: kstk, a3: exc_table, depc: a0, excsave1: a3
 	 */
+_DoubleExceptionVector_WindowOverflow:
+	extui	a2, a0, 0, 6	# get offset into 64-byte vector handler
+	beqz	a2, 1f		# if at start of vector, don't restore
 
-#ifdef CONFIG_MMU
-	.extern fast_second_level_miss_double_kernel
+	addi	a0, a0, -128
+	bbsi	a0, 8, 1f	# don't restore except for overflow 8 and 12
+	bbsi	a0, 7, 2f
 
-.Lksp:	/* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
+	/*
+	 * Restore a0 as saved by _WindowOverflow8().
+	 *
+	 * FIXME:  we really need a fixup handler for this L32E,
+	 * for the extremely unlikely case where the overflow handler's
+	 * reference thru a0 gets a hardware TLB refill that bumps out
+	 * the (distinct, aliasing) TLB entry that mapped its prior
+	 * references thru a9, and where our reference now thru a9
+	 * gets a 2nd-level miss exception (not hardware TLB refill).
+	 */
 
-	rsr	a3, exccause
-	beqi	a3, EXCCAUSE_ITLB_MISS, 1f
-	addi	a3, a3, -EXCCAUSE_DTLB_MISS
-	bnez	a3, .Lunrecoverable
-1:	movi	a3, fast_second_level_miss_double_kernel
-	jx	a3
-#else
-.equ	.Lksp,	.Lunrecoverable
-#endif
+	l32e	a2, a9, -16
+	wsr	a2, depc	# replace the saved a0
+	j	1f
 
-	/* Critical! We can't handle this situation. PANIC! */
+2:
+	/*
+	 * Restore a0 as saved by _WindowOverflow12().
+	 *
+	 * FIXME:  we really need a fixup handler for this L32E,
+	 * for the extremely unlikely case where the overflow handler's
+	 * reference thru a0 gets a hardware TLB refill that bumps out
+	 * the (distinct, aliasing) TLB entry that mapped its prior
+	 * references thru a13, and where our reference now thru a13
+	 * gets a 2nd-level miss exception (not hardware TLB refill).
+	 */
 
-	.extern unrecoverable_exception
+	l32e	a2, a13, -16
+	wsr	a2, depc	# replace the saved a0
+1:
+	/*
+	 * Restore WindowBase while leaving all address registers restored.
+	 * We have to use ROTW for this, because WSR.WINDOWBASE requires
+	 * an address register (which would prevent restore).
+	 *
+	 * Window Base goes from 0 ... 7 (Module 8)
+	 * Window Start is 8 bits; Ex: (0b1010 1010):0x55 from series of call4s
+	 */
+
+	rsr	a0, ps
+	extui	a0, a0, PS_OWB_SHIFT, PS_OWB_WIDTH
+	rsr	a2, windowbase
+	sub	a0, a2, a0
+	extui	a0, a0, 0, 3
 
-.Lunrecoverable_fixup:
 	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
-	xsr	a0, depc
+	xsr	a3, excsave1
+	beqi	a0, 1, .L1pane
+	beqi	a0, 3, .L3pane
 
-.Lunrecoverable:
-	rsr	a3, excsave1
-	wsr	a0, excsave1
-	movi	a0, unrecoverable_exception
-	callx0	a0
+	rsr	a0, depc
+	rotw	-2
+
+	/*
+	 * We are now in the user code's original window frame.
+	 * Process the exception as a user exception as if it was
+	 * taken by the user code.
+	 *
+	 * This is similar to the user exception vector,
+	 * except that PT_DEPC isn't set to EXCCAUSE.
+	 */
+1:
+	xsr	a3, excsave1
+	wsr	a2, depc
+	l32i	a2, a3, EXC_TABLE_KSTK
+	s32i	a0, a2, PT_AREG0
+	rsr	a0, exccause
+
+	s32i	a0, a2, PT_DEPC
+
+	addx4	a0, a0, a3
+	l32i	a0, a0, EXC_TABLE_FAST_USER
+	xsr	a3, excsave1
+	jx	a0
+
+.L1pane:
+	rsr	a0, depc
+	rotw	-1
+	j	1b
+
+.L3pane:
+	rsr	a0, depc
+	rotw	-3
+	j	1b
 
 	.end literal_prefix
 

arch/xtensa/kernel/xtensa_ksyms.c

@@ -25,6 +25,7 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
+#include <asm/ftrace.h>
 #ifdef CONFIG_BLK_DEV_FD
 #include <asm/floppy.h>
 #endif