Merge tag 'linux-can-next-for-4.8-20160617' of...

Merge tag 'linux-can-next-for-4.8-20160617' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2016-06-17

this is a pull request of 14 patches for net-next/master.

Geert Uytterhoeven contributes a patch that adds a file patterns for
CAN device tree bindings to MAINTAINERS. A patch by Alexander Aring
fixes warnings when building without proc support. A patch by me
improves the sample point calculation. Marek Vasut's patch converts
the slcan driver to use CAN_MTU. A patch by William Breathitt Gray
converts the tscan1 driver to use module_isa_driver.

Two patches by Maximilian Schneider for the gs_usb driver fix coding
style and add support for set_phys_id callback. 5 patches by Oliver
Hartkopp add support for CANFD to the bcm. And finally two patches
by Ramesh Shanmugasundaram, which add support for the rcar_canfd
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/can/rcar_canfd.txt

+Renesas R-Car CAN FD controller Device Tree Bindings
+----------------------------------------------------
+
+Required properties:
+- compatible: Must contain one or more of the following:
+  - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
+  - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
+
+  When compatible with the generic version, nodes must list the
+  SoC-specific version corresponding to the platform first, followed by the
+  family-specific and/or generic versions.
+
+- reg: physical base address and size of the R-Car CAN FD register map.
+- interrupts: interrupt specifier for the Global & Channel interrupts
+- clocks: phandles and clock specifiers for 3 clock inputs.
+- clock-names: 3 clock input name strings: "fck", "canfd", "can_clk".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must be "default".
+
+Required child nodes:
+The controller supports two channels and each is represented as a child node.
+The name of the child nodes are "channel0" and "channel1" respectively. Each
+child node supports the "status" property only, which is used to
+enable/disable the respective channel.
+
+Required properties for "renesas,r8a7795-canfd" compatible:
+In R8A7795 SoC, canfd clock is a div6 clock and can be used by both CAN
+and CAN FD controller at the same time. It needs to be scaled to maximum
+frequency if any of these controllers use it. This is done using the
+below properties.
+
+- assigned-clocks: phandle of canfd clock.
+- assigned-clock-rates: maximum frequency of this clock.
+
+Example
+-------
+
+SoC common .dtsi file:
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+Board specific .dts file:
+
+E.g. below enables Channel 1 alone in the board.
+
+&canfd {
+        pinctrl-0 = <&canfd1_pins>;
+        pinctrl-names = "default";
+        status = "okay";
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+E.g. below enables Channel 0 alone in the board using External clock
+as fCAN clock.
+
+&canfd {
+        pinctrl-0 = <&canfd0_pins &can_clk_pins>;
+        pinctrl-names = "default";
+        status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};

Documentation/networking/can.txt

@@ -31,6 +31,7 @@ This file contains
       4.2.4 Broadcast Manager message sequence transmission
       4.2.5 Broadcast Manager receive filter timers
       4.2.6 Broadcast Manager multiplex message receive filter
+      4.2.7 Broadcast Manager CAN FD support
     4.3 connected transport protocols (SOCK_SEQPACKET)
     4.4 unconnected transport protocols (SOCK_DGRAM)
 
@@ -799,7 +800,7 @@ solution for a couple of reasons:
     } mytxmsg;
 
     (..)
-    mytxmsg.nframes = 4;
+    mytxmsg.msg_head.nframes = 4;
     (..)
 
     write(s, &mytxmsg, sizeof(mytxmsg));
@@ -852,6 +853,28 @@ solution for a couple of reasons:
 
     write(s, &msg, sizeof(msg));
 
+  4.2.7 Broadcast Manager CAN FD support
+
+  The programming API of the CAN_BCM depends on struct can_frame which is
+  given as array directly behind the bcm_msg_head structure. To follow this
+  schema for the CAN FD frames a new flag 'CAN_FD_FRAME' in the bcm_msg_head
+  flags indicates that the concatenated CAN frame structures behind the
+  bcm_msg_head are defined as struct canfd_frame.
+
+    struct {
+            struct bcm_msg_head msg_head;
+            struct canfd_frame frame[5];
+    } msg;
+
+    msg.msg_head.opcode  = RX_SETUP;
+    msg.msg_head.can_id  = 0x42;
+    msg.msg_head.flags   = CAN_FD_FRAME;
+    msg.msg_head.nframes = 5;
+    (..)
+
+  When using CAN FD frames for multiplex filtering the MUX mask is still
+  expected in the first 64 bit of the struct canfd_frame data section.
+
   4.3 connected transport protocols (SOCK_SEQPACKET)
   4.4 unconnected transport protocols (SOCK_DGRAM)
 

MAINTAINERS

@@ -2814,6 +2814,7 @@ W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/can/
 F:	drivers/net/can/
 F:	include/linux/can/dev.h
 F:	include/linux/can/platform/

drivers/net/can/Kconfig

@@ -104,16 +104,6 @@ config CAN_JANZ_ICAN3
 	  This driver can also be built as a module. If so, the module will be
 	  called janz-ican3.ko.
 
-config CAN_RCAR
-	tristate "Renesas R-Car CAN controller"
-	depends on ARCH_RENESAS || ARM
-	---help---
-	  Say Y here if you want to use CAN controller found on Renesas R-Car
-	  SoCs.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called rcar_can.
-
 config CAN_SUN4I
 	tristate "Allwinner A10 CAN controller"
 	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
@@ -152,6 +142,7 @@ source "drivers/net/can/cc770/Kconfig"
 source "drivers/net/can/ifi_canfd/Kconfig"
 source "drivers/net/can/m_can/Kconfig"
 source "drivers/net/can/mscan/Kconfig"
+source "drivers/net/can/rcar/Kconfig"
 source "drivers/net/can/sja1000/Kconfig"
 source "drivers/net/can/softing/Kconfig"
 source "drivers/net/can/spi/Kconfig"

drivers/net/can/Makefile

@@ -10,6 +10,7 @@ can-dev-y			:= dev.o
 
 can-dev-$(CONFIG_CAN_LEDS)	+= led.o
 
+obj-y				+= rcar/
 obj-y				+= spi/
 obj-y				+= usb/
 obj-y				+= softing/
@@ -24,7 +25,6 @@ obj-$(CONFIG_CAN_IFI_CANFD)	+= ifi_canfd/
 obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 obj-$(CONFIG_CAN_MSCAN)		+= mscan/
 obj-$(CONFIG_CAN_M_CAN)		+= m_can/
-obj-$(CONFIG_CAN_RCAR)		+= rcar_can.o
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
 obj-$(CONFIG_CAN_SUN4I)		+= sun4i_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o

drivers/net/can/dev.c

@@ -69,6 +69,7 @@ EXPORT_SYMBOL_GPL(can_len2dlc);
 
 #ifdef CONFIG_CAN_CALC_BITTIMING
 #define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */
+#define CAN_CALC_SYNC_SEG 1
 
 /*
  * Bit-timing calculation derived from:
@@ -83,98 +84,126 @@ EXPORT_SYMBOL_GPL(can_len2dlc);
  * registers of the CAN controller. You can find more information
  * in the header file linux/can/netlink.h.
  */
-static int can_update_spt(const struct can_bittiming_const *btc,
-			  int sampl_pt, int tseg, int *tseg1, int *tseg2)
+static int can_update_sample_point(const struct can_bittiming_const *btc,
+			  unsigned int sample_point_nominal, unsigned int tseg,
+			  unsigned int *tseg1_ptr, unsigned int *tseg2_ptr,
+			  unsigned int *sample_point_error_ptr)
 {
-	*tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000;
-	if (*tseg2 < btc->tseg2_min)
-		*tseg2 = btc->tseg2_min;
-	if (*tseg2 > btc->tseg2_max)
-		*tseg2 = btc->tseg2_max;
-	*tseg1 = tseg - *tseg2;
-	if (*tseg1 > btc->tseg1_max) {
-		*tseg1 = btc->tseg1_max;
-		*tseg2 = tseg - *tseg1;
+	unsigned int sample_point_error, best_sample_point_error = UINT_MAX;
+	unsigned int sample_point, best_sample_point = 0;
+	unsigned int tseg1, tseg2;
+	int i;
+
+	for (i = 0; i <= 1; i++) {
+		tseg2 = tseg + CAN_CALC_SYNC_SEG - (sample_point_nominal * (tseg + CAN_CALC_SYNC_SEG)) / 1000 - i;
+		tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max);
+		tseg1 = tseg - tseg2;
+		if (tseg1 > btc->tseg1_max) {
+			tseg1 = btc->tseg1_max;
+			tseg2 = tseg - tseg1;
+		}
+
+		sample_point = 1000 * (tseg + CAN_CALC_SYNC_SEG - tseg2) / (tseg + CAN_CALC_SYNC_SEG);
+		sample_point_error = abs(sample_point_nominal - sample_point);
+
+		if ((sample_point <= sample_point_nominal) && (sample_point_error < best_sample_point_error)) {
+			best_sample_point = sample_point;
+			best_sample_point_error = sample_point_error;
+			*tseg1_ptr = tseg1;
+			*tseg2_ptr = tseg2;
 		}
-	return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
+	}
+
+	if (sample_point_error_ptr)
+		*sample_point_error_ptr = best_sample_point_error;
+
+	return best_sample_point;
 }
 
 static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 			      const struct can_bittiming_const *btc)
 {
 	struct can_priv *priv = netdev_priv(dev);
-	long best_error = 1000000000, error = 0;
-	int best_tseg = 0, best_brp = 0, brp = 0;
-	int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0;
-	int spt_error = 1000, spt = 0, sampl_pt;
-	long rate;
+	unsigned int bitrate;			/* current bitrate */
+	unsigned int bitrate_error;		/* difference between current and nominal value */
+	unsigned int best_bitrate_error = UINT_MAX;
+	unsigned int sample_point_error;	/* difference between current and nominal value */
+	unsigned int best_sample_point_error = UINT_MAX;
+	unsigned int sample_point_nominal;	/* nominal sample point */
+	unsigned int best_tseg = 0;		/* current best value for tseg */
+	unsigned int best_brp = 0;		/* current best value for brp */
+	unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0;
 	u64 v64;
 
 	/* Use CiA recommended sample points */
 	if (bt->sample_point) {
-		sampl_pt = bt->sample_point;
+		sample_point_nominal = bt->sample_point;
 	} else {
 		if (bt->bitrate > 800000)
-			sampl_pt = 750;
+			sample_point_nominal = 750;
 		else if (bt->bitrate > 500000)
-			sampl_pt = 800;
+			sample_point_nominal = 800;
 		else
-			sampl_pt = 875;
+			sample_point_nominal = 875;
 	}
 
 	/* tseg even = round down, odd = round up */
 	for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
 	     tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
-		tsegall = 1 + tseg / 2;
+		tsegall = CAN_CALC_SYNC_SEG + tseg / 2;
+
 		/* Compute all possible tseg choices (tseg=tseg1+tseg2) */
 		brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;
-		/* chose brp step which is possible in system */
+
+		/* choose brp step which is possible in system */
 		brp = (brp / btc->brp_inc) * btc->brp_inc;
 		if ((brp < btc->brp_min) || (brp > btc->brp_max))
 			continue;
-		rate = priv->clock.freq / (brp * tsegall);
-		error = bt->bitrate - rate;
+
+		bitrate = priv->clock.freq / (brp * tsegall);
+		bitrate_error = abs(bt->bitrate - bitrate);
+
 		/* tseg brp biterror */
-		if (error < 0)
-			error = -error;
-		if (error > best_error)
+		if (bitrate_error > best_bitrate_error)
 			continue;
-		best_error = error;
-		if (error == 0) {
-			spt = can_update_spt(btc, sampl_pt, tseg / 2,
-					     &tseg1, &tseg2);
-			error = sampl_pt - spt;
-			if (error < 0)
-				error = -error;
-			if (error > spt_error)
+
+		/* reset sample point error if we have a better bitrate */
+		if (bitrate_error < best_bitrate_error)
+			best_sample_point_error = UINT_MAX;
+
+		can_update_sample_point(btc, sample_point_nominal, tseg / 2, &tseg1, &tseg2, &sample_point_error);
+		if (sample_point_error > best_sample_point_error)
 			continue;
-			spt_error = error;
-		}
+
+		best_sample_point_error = sample_point_error;
+		best_bitrate_error = bitrate_error;
 		best_tseg = tseg / 2;
 		best_brp = brp;
-		if (error == 0)
+
+		if (bitrate_error == 0 && sample_point_error == 0)
 			break;
 	}
 
-	if (best_error) {
+	if (best_bitrate_error) {
 		/* Error in one-tenth of a percent */
-		error = (best_error * 1000) / bt->bitrate;
-		if (error > CAN_CALC_MAX_ERROR) {
+		v64 = (u64)best_bitrate_error * 1000;
+		do_div(v64, bt->bitrate);
+		bitrate_error = (u32)v64;
+		if (bitrate_error > CAN_CALC_MAX_ERROR) {
 			netdev_err(dev,
-				   "bitrate error %ld.%ld%% too high\n",
-				   error / 10, error % 10);
+				   "bitrate error %d.%d%% too high\n",
+				   bitrate_error / 10, bitrate_error % 10);
 			return -EDOM;
-		} else {
-			netdev_warn(dev, "bitrate error %ld.%ld%%\n",
-				    error / 10, error % 10);
 		}
+		netdev_warn(dev, "bitrate error %d.%d%%\n",
+			    bitrate_error / 10, bitrate_error % 10);
 	}
 
 	/* real sample point */
-	bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg,
-					  &tseg1, &tseg2);
+	bt->sample_point = can_update_sample_point(btc, sample_point_nominal, best_tseg,
+					  &tseg1, &tseg2, NULL);
 
-	v64 = (u64)best_brp * 1000000000UL;
+	v64 = (u64)best_brp * 1000 * 1000 * 1000;
 	do_div(v64, priv->clock.freq);
 	bt->tq = (u32)v64;
 	bt->prop_seg = tseg1 / 2;
@@ -182,9 +211,9 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 	bt->phase_seg2 = tseg2;
 
 	/* check for sjw user settings */
-	if (!bt->sjw || !btc->sjw_max)
+	if (!bt->sjw || !btc->sjw_max) {
 		bt->sjw = 1;
-	else {
+	} else {
 		/* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */
 		if (bt->sjw > btc->sjw_max)
 			bt->sjw = btc->sjw_max;
@@ -194,8 +223,9 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 	}
 
 	bt->brp = best_brp;
-	/* real bit-rate */
-	bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1));
+
+	/* real bitrate */
+	bt->bitrate = priv->clock.freq / (bt->brp * (CAN_CALC_SYNC_SEG + tseg1 + tseg2));
 
 	return 0;
 }

drivers/net/can/rcar/Kconfig

+config CAN_RCAR
+	tristate "Renesas R-Car CAN controller"
+	depends on ARCH_RENESAS || ARM
+	---help---
+	  Say Y here if you want to use CAN controller found on Renesas R-Car
+	  SoCs.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called rcar_can.
+
+config CAN_RCAR_CANFD
+	tristate "Renesas R-Car CAN FD controller"
+	depends on ARCH_RENESAS || ARM
+	---help---
+	  Say Y here if you want to use CAN FD controller found on
+	  Renesas R-Car SoCs. The driver puts the controller in CAN FD only
+	  mode, which can interoperate with CAN2.0 nodes but does not support
+	  dedicated CAN 2.0 mode.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called rcar_canfd.

drivers/net/can/rcar/Makefile

+#
+#  Makefile for the Renesas R-Car CAN & CAN FD controller drivers
+#
+
+obj-$(CONFIG_CAN_RCAR)		+= rcar_can.o
+obj-$(CONFIG_CAN_RCAR_CANFD)	+= rcar_canfd.o

drivers/net/can/sja1000/tscan1.c

@@ -203,14 +203,4 @@ static struct isa_driver tscan1_isa_driver = {
 	},
 };
 
-static int __init tscan1_init(void)
-{
-	return isa_register_driver(&tscan1_isa_driver, TSCAN1_MAXDEV);
-}
-module_init(tscan1_init);
-
-static void __exit tscan1_exit(void)
-{
-	isa_unregister_driver(&tscan1_isa_driver);
-}
-module_exit(tscan1_exit);
+module_isa_driver(tscan1_isa_driver, TSCAN1_MAXDEV);

drivers/net/can/slcan.c

@@ -354,7 +354,7 @@ static netdev_tx_t slc_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct slcan *sl = netdev_priv(dev);
 
-	if (skb->len != sizeof(struct can_frame))
+	if (skb->len != CAN_MTU)
 		goto out;
 
 	spin_lock(&sl->lock);
@@ -442,7 +442,7 @@ static void slc_setup(struct net_device *dev)
 	dev->addr_len		= 0;
 	dev->tx_queue_len	= 10;
 
-	dev->mtu		= sizeof(struct can_frame);
+	dev->mtu		= CAN_MTU;
 	dev->type		= ARPHRD_CAN;
 
 	/* New-style flags. */

drivers/net/can/usb/gs_usb.c

@@ -39,7 +39,9 @@ enum gs_usb_breq {
 	GS_USB_BREQ_MODE,
 	GS_USB_BREQ_BERR,
 	GS_USB_BREQ_BT_CONST,
-	GS_USB_BREQ_DEVICE_CONFIG
+	GS_USB_BREQ_DEVICE_CONFIG,
+	GS_USB_BREQ_TIMESTAMP,
+	GS_USB_BREQ_IDENTIFY,
 };
 
 enum gs_can_mode {
@@ -58,6 +60,11 @@ enum gs_can_state {
 	GS_CAN_STATE_SLEEPING
 };
 
+enum gs_can_identify_mode {
+	GS_CAN_IDENTIFY_OFF = 0,
+	GS_CAN_IDENTIFY_ON
+};
+
 /* data types passed between host and device */
 struct gs_host_config {
 	u32 byte_order;
@@ -77,10 +84,10 @@ struct gs_device_config {
 } __packed;
 
 #define GS_CAN_MODE_NORMAL               0
-#define GS_CAN_MODE_LISTEN_ONLY          (1<<0)
-#define GS_CAN_MODE_LOOP_BACK            (1<<1)
-#define GS_CAN_MODE_TRIPLE_SAMPLE        (1<<2)
-#define GS_CAN_MODE_ONE_SHOT             (1<<3)
+#define GS_CAN_MODE_LISTEN_ONLY          BIT(0)
+#define GS_CAN_MODE_LOOP_BACK            BIT(1)
+#define GS_CAN_MODE_TRIPLE_SAMPLE        BIT(2)
+#define GS_CAN_MODE_ONE_SHOT             BIT(3)
 
 struct gs_device_mode {
 	u32 mode;
@@ -101,10 +108,16 @@ struct gs_device_bittiming {
 	u32 brp;
 } __packed;
 
-#define GS_CAN_FEATURE_LISTEN_ONLY      (1<<0)
-#define GS_CAN_FEATURE_LOOP_BACK        (1<<1)
-#define GS_CAN_FEATURE_TRIPLE_SAMPLE    (1<<2)
-#define GS_CAN_FEATURE_ONE_SHOT         (1<<3)
+struct gs_identify_mode {
+	u32 mode;
+} __packed;
+
+#define GS_CAN_FEATURE_LISTEN_ONLY      BIT(0)
+#define GS_CAN_FEATURE_LOOP_BACK        BIT(1)
+#define GS_CAN_FEATURE_TRIPLE_SAMPLE    BIT(2)
+#define GS_CAN_FEATURE_ONE_SHOT         BIT(3)
+#define GS_CAN_FEATURE_HW_TIMESTAMP     BIT(4)
+#define GS_CAN_FEATURE_IDENTIFY         BIT(5)
 
 struct gs_device_bt_const {
 	u32 feature;
@@ -209,7 +222,8 @@ static void gs_free_tx_context(struct gs_tx_context *txc)
 
 /* Get a tx context by id.
  */
-static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev, unsigned int id)
+static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev,
+					       unsigned int id)
 {
 	unsigned long flags;
 
@@ -452,7 +466,8 @@ static void gs_usb_xmit_callback(struct urb *urb)
 		netif_wake_queue(netdev);
 }
 
-static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
+				     struct net_device *netdev)
 {
 	struct gs_can *dev = netdev_priv(netdev);
 	struct net_device_stats *stats = &dev->netdev->stats;
@@ -658,7 +673,8 @@ static int gs_can_open(struct net_device *netdev)
 	rc = usb_control_msg(interface_to_usbdev(dev->iface),
 			     usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0),
 			     GS_USB_BREQ_MODE,
-			     USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+			     USB_DIR_OUT | USB_TYPE_VENDOR |
+			     USB_RECIP_INTERFACE,
 			     dev->channel,
 			     0,
 			     dm,
@@ -721,7 +737,59 @@ static const struct net_device_ops gs_usb_netdev_ops = {
 	.ndo_change_mtu = can_change_mtu,
 };
 
-static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf)
+static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
+{
+	struct gs_can *dev = netdev_priv(netdev);
+	struct gs_identify_mode imode;
+	int rc;
+
+	if (do_identify)
+		imode.mode = GS_CAN_IDENTIFY_ON;
+	else
+		imode.mode = GS_CAN_IDENTIFY_OFF;
+
+	rc = usb_control_msg(interface_to_usbdev(dev->iface),
+			     usb_sndctrlpipe(interface_to_usbdev(dev->iface),
+					     0),
+			     GS_USB_BREQ_IDENTIFY,
+			     USB_DIR_OUT | USB_TYPE_VENDOR |
+			     USB_RECIP_INTERFACE,
+			     dev->channel,
+			     0,
+			     &imode,
+			     sizeof(imode),
+			     100);
+
+	return (rc > 0) ? 0 : rc;
+}
+
+/* blink LED's for finding the this interface */
+static int gs_usb_set_phys_id(struct net_device *dev,
+			      enum ethtool_phys_id_state state)
+{
+	int rc = 0;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_ON);
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_OFF);
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static const struct ethtool_ops gs_usb_ethtool_ops = {
+	.set_phys_id = gs_usb_set_phys_id,
+};
+
+static struct gs_can *gs_make_candev(unsigned int channel,
+				     struct usb_interface *intf,
+				     struct gs_device_config *dconf)
 {
 	struct gs_can *dev;
 	struct net_device *netdev;
@@ -809,10 +877,14 @@ static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface
 	if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT)
 		dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
 
-	kfree(bt_const);
-
 	SET_NETDEV_DEV(netdev, &intf->dev);
 
+	if (dconf->sw_version > 1)
+		if (bt_const->feature & GS_CAN_FEATURE_IDENTIFY)
+			netdev->ethtool_ops = &gs_usb_ethtool_ops;
+
+	kfree(bt_const);
+
 	rc = register_candev(dev->netdev);
 	if (rc) {
 		free_candev(dev->netdev);
@@ -830,19 +902,16 @@ static void gs_destroy_candev(struct gs_can *dev)
 	free_candev(dev->netdev);
 }
 
-static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+static int gs_usb_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
 {
 	struct gs_usb *dev;
 	int rc = -ENOMEM;
 	unsigned int icount, i;
-	struct gs_host_config *hconf;
-	struct gs_device_config *dconf;
-
-	hconf = kmalloc(sizeof(*hconf), GFP_KERNEL);
-	if (!hconf)
-		return -ENOMEM;
-
-	hconf->byte_order = 0x0000beef;
+	struct gs_host_config hconf = {
+		.byte_order = 0x0000beef,
+	};
+	struct gs_device_config dconf;
 
 	/* send host config */
 	rc = usb_control_msg(interface_to_usbdev(intf),
@@ -851,22 +920,16 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 			     USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
 			     1,
 			     intf->altsetting[0].desc.bInterfaceNumber,
-			     hconf,
-			     sizeof(*hconf),
+			     &hconf,
+			     sizeof(hconf),
 			     1000);
 
-	kfree(hconf);
-
 	if (rc < 0) {
 		dev_err(&intf->dev, "Couldn't send data format (err=%d)\n",
 			rc);
 		return rc;
 	}
 
-	dconf = kmalloc(sizeof(*dconf), GFP_KERNEL);
-	if (!dconf)
-		return -ENOMEM;
-
 	/* read device config */
 	rc = usb_control_msg(interface_to_usbdev(intf),
 			     usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
@@ -874,22 +937,16 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 			     USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
 			     1,
 			     intf->altsetting[0].desc.bInterfaceNumber,
-			     dconf,
-			     sizeof(*dconf),
+			     &dconf,
+			     sizeof(dconf),
 			     1000);
 	if (rc < 0) {
 		dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n",
 			rc);
-
-		kfree(dconf);
-
 		return rc;
 	}
 
-	icount = dconf->icount+1;
-
-	kfree(dconf);
-
+	icount = dconf.icount + 1;
 	dev_info(&intf->dev, "Configuring for %d interfaces\n", icount);
 
 	if (icount > GS_MAX_INTF) {
@@ -910,7 +967,7 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 	dev->udev = interface_to_usbdev(intf);
 
 	for (i = 0; i < icount; i++) {
-		dev->canch[i] = gs_make_candev(i, intf);
+		dev->canch[i] = gs_make_candev(i, intf, &dconf);
 		if (IS_ERR_OR_NULL(dev->canch[i])) {
 			/* save error code to return later */
 			rc = PTR_ERR(dev->canch[i]);

include/uapi/linux/can/bcm.h

@@ -99,5 +99,6 @@ enum {
 #define RX_ANNOUNCE_RESUME  0x0100
 #define TX_RESET_MULTI_IDX  0x0200
 #define RX_RTR_FRAME        0x0400
+#define CAN_FD_FRAME        0x0800
 
 #endif /* !_UAPI_CAN_BCM_H */

net/can/Makefile

@@ -3,7 +3,8 @@
 #
 
 obj-$(CONFIG_CAN)	+= can.o
-can-y			:= af_can.o proc.o
+can-y			:= af_can.o
+can-$(CONFIG_PROC_FS)	+= proc.o
 
 obj-$(CONFIG_CAN_RAW)	+= can-raw.o
 can-raw-y		:= raw.o

net/can/af_can.h

@@ -113,8 +113,19 @@ struct s_pstats {
 extern struct dev_rcv_lists can_rx_alldev_list;
 
 /* function prototypes for the CAN networklayer procfs (proc.c) */
+#ifdef CONFIG_PROC_FS
 void can_init_proc(void);
 void can_remove_proc(void);
+#else
+static inline void can_init_proc(void)
+{
+	pr_info("can: Can't create /proc/net/can. CONFIG_PROC_FS missing!\n");
+}
+
+static inline void can_remove_proc(void)
+{
+}
+#endif
 void can_stat_update(unsigned long data);
 
 /* structures and variables from af_can.c needed in proc.c for reading */

net/can/proc.c

@@ -517,8 +517,7 @@ void can_init_proc(void)
 	can_dir = proc_mkdir("can", init_net.proc_net);
 
 	if (!can_dir) {
-		printk(KERN_INFO "can: failed to create /proc/net/can . "
-		       "CONFIG_PROC_FS missing?\n");
+		pr_info("can: failed to create /proc/net/can.\n");
 		return;
 	}