Commit 6792dfe3 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'akpm' (patches from Andrew Morton)

Merge misc fixes from Andrew Morton:
 "A bunch of fixes"

* emailed patches fron Andrew Morton <akpm@linux-foundation.org>:
  ocfs2: check existence of old dentry in ocfs2_link()
  ocfs2: update inode size after zeroing the hole
  ocfs2: fix issue that ocfs2_setattr() does not deal with new_i_size==i_size
  mm/memory-failure.c: move refcount only in !MF_COUNT_INCREASED
  smp.h: fix x86+cpu.c sparse warnings about arch nonboot CPU calls
  mm: fix page leak at nfs_symlink()
  slub: do not assert not having lock in removing freed partial
  gitignore: add all.config
  ocfs2: fix ocfs2_sync_file() if filesystem is readonly
  drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero
  fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmem
  xen: properly account for _PAGE_NUMA during xen pte translations
  mm/slub.c: list_lock may not be held in some circumstances
  drivers/md/bcache/extents.c: use %zi to format size_t
  vmcore: prevent PT_NOTE p_memsz overflow during header update
  drivers/message/i2o/i2o_config.c: fix deadlock in compat_ioctl(I2OGETIOPS)
  Documentation/: update 00-INDEX files
  checkpatch: fix detection of git repository
  get_maintainer: fix detection of git repository
  drivers/misc/sgi-gru/grukdump.c: unlocking should be conditional in gru_dump_context()
parents cbf2822a 0e048316
......@@ -92,3 +92,6 @@ extra_certificates
signing_key.priv
signing_key.x509
x509.genkey
# Kconfig presets
all.config
......@@ -29,6 +29,8 @@ DMA-ISA-LPC.txt
- How to do DMA with ISA (and LPC) devices.
DMA-attributes.txt
- listing of the various possible attributes a DMA region can have
dmatest.txt
- how to compile, configure and use the dmatest system.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
EDID/
......@@ -77,6 +79,8 @@ arm/
- directory with info about Linux on the ARM architecture.
arm64/
- directory with info about Linux on the 64 bit ARM architecture.
assoc_array.txt
- generic associative array intro.
atomic_ops.txt
- semantics and behavior of atomic and bitmask operations.
auxdisplay/
......@@ -87,6 +91,8 @@ bad_memory.txt
- how to use kernel parameters to exclude bad RAM regions.
basic_profiling.txt
- basic instructions for those who wants to profile Linux kernel.
bcache.txt
- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
binfmt_misc.txt
- info on the kernel support for extra binary formats.
blackfin/
......@@ -171,6 +177,8 @@ early-userspace/
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
efi-stub.txt
- How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
eisa.txt
- info on EISA bus support.
email-clients.txt
......@@ -195,8 +203,8 @@ futex-requeue-pi.txt
- info on requeueing of tasks from a non-PI futex to a PI futex
gcov.txt
- use of GCC's coverage testing tool "gcov" with the Linux kernel
gpio.txt
- overview of GPIO (General Purpose Input/Output) access conventions.
gpio/
- gpio related documentation
hid/
- directory with information on human interface devices
highuid.txt
......@@ -255,6 +263,8 @@ kernel-docs.txt
- listing of various WWW + books that document kernel internals.
kernel-parameters.txt
- summary listing of command line / boot prompt args for the kernel.
kernel-per-CPU-kthreads.txt
- List of all per-CPU kthreads and how they introduce jitter.
kmemcheck.txt
- info on dynamic checker that detects uses of uninitialized memory.
kmemleak.txt
......@@ -299,8 +309,6 @@ memory-devices/
- directory with info on parts like the Texas Instruments EMIF driver
memory-hotplug.txt
- Hotpluggable memory support, how to use and current status.
memory.txt
- info on typical Linux memory problems.
metag/
- directory with info about Linux on Meta architecture.
mips/
......@@ -311,6 +319,8 @@ mmc/
- directory with info about the MMC subsystem
mn10300/
- directory with info about the mn10300 architecture port
module-signing.txt
- Kernel module signing for increased security when loading modules.
mtd/
- directory with info about memory technology devices (flash)
mono.txt
......@@ -343,6 +353,8 @@ pcmcia/
- info on the Linux PCMCIA driver.
percpu-rw-semaphore.txt
- RCU based read-write semaphore optimized for locking for reading
phy.txt
- Description of the generic PHY framework.
pi-futex.txt
- documentation on lightweight priority inheritance futexes.
pinctrl.txt
......@@ -431,6 +443,8 @@ sysrq.txt
- info on the magic SysRq key.
target/
- directory with info on generating TCM v4 fabric .ko modules
this_cpu_ops.txt
- List rationale behind and the way to use this_cpu operations.
thermal/
- directory with information on managing thermal issues (CPU/temp)
trace/
......@@ -469,6 +483,8 @@ wimax/
- directory with info about Intel Wireless Wimax Connections
workqueue.txt
- information on the Concurrency Managed Workqueue implementation
ww-mutex-design.txt
- Intro to Mutex wait/would deadlock handling.s
x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
xtensa/
......
......@@ -8,6 +8,8 @@ listRCU.txt
- Using RCU to Protect Read-Mostly Linked Lists
lockdep.txt
- RCU and lockdep checking
lockdep-splat.txt
- RCU Lockdep splats explained.
NMI-RCU.txt
- Using RCU to Protect Dynamic NMI Handlers
rcubarrier.txt
......
......@@ -4,6 +4,8 @@ Booting
- requirements for booting
Interrupts
- ARM Interrupt subsystem documentation
IXP4xx
- Intel IXP4xx Network processor.
msm
- MSM specific documentation
Netwinder
......@@ -24,8 +26,16 @@ SPEAr
- ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
cluster-pm-race-avoidance.txt
- Algorithm for CPU and Cluster setup/teardown
empeg/
- Ltd's Empeg MP3 Car Audio Player
firmware.txt
- Secure firmware registration and calling.
kernel_mode_neon.txt
- How to use NEON instructions in kernel mode
kernel_user_helpers.txt
- Helper functions in kernel space made available for userspace.
mem_alignment
- alignment abort handler documentation
memory.txt
......@@ -34,3 +44,7 @@ nwfpe/
- NWFPE floating point emulator documentation
swp_emulation
- SWP/SWPB emulation handler/logging description
tcm.txt
- ARM Tightly Coupled Memory
vlocks.txt
- Voting locks, low-level mechanism relying on memory system atomic writes.
00-INDEX
- This file
Makefile
- Makefile for gptimers example file.
bfin-gpio-notes.txt
- Notes in developing/using bfin-gpio driver.
bfin-spi-notes.txt
- Notes for using bfin spi bus driver.
gptimers-example.c
- gptimers example
......@@ -14,6 +14,8 @@ deadline-iosched.txt
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
null_blk.txt
- Null block for block-layer benchmarking.
queue-sysfs.txt
- Queue's sysfs entries
request.txt
......
......@@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
- this file
booting-without-of.txt
- Booting Linux without Open Firmware, describes history and format of device trees.
usage-model.txt
- How Linux uses DT and what DT aims to solve.
\ No newline at end of file
......@@ -5,6 +5,8 @@ please mail me.
00-INDEX
- this file.
api.txt
- The frame buffer API between applications and buffer devices.
arkfb.txt
- info on the fbdev driver for ARK Logic chips.
aty128fb.txt
......@@ -51,12 +53,16 @@ sh7760fb.txt
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
sisfb.txt
- info on the framebuffer device driver for various SiS chips.
sm501.txt
- info on the framebuffer device driver for sm501 videoframebuffer.
sstfb.txt
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
tgafb.txt
- info on the TGA (DECChip 21030) frame buffer driver.
tridentfb.txt
info on the framebuffer driver for some Trident chip based cards.
udlfb.txt
- Driver for DisplayLink USB 2.0 chips.
uvesafb.txt
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
vesafb.txt
......
......@@ -2,6 +2,8 @@
- this file (info on some of the filesystems supported by linux).
Locking
- info on locking rules as they pertain to Linux VFS.
Makefile
- Makefile for building the filsystems-part of DocBook.
9p.txt
- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
adfs.txt
......
......@@ -12,6 +12,8 @@ nfs41-server.txt
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software
nfsd-admin-interfaces.txt
- Administrative interfaces for nfsd.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
pnfs.txt
......@@ -20,5 +22,5 @@ rpc-cache.txt
- introduction to the caching mechanisms in the sunrpc layer.
idmapper.txt
- information for configuring request-keys to be used by idmapper
knfsd-rpcgss.txt
rpc-server-gss.txt
- Information on GSS authentication support in the NFS Server
......@@ -10,3 +10,5 @@ ide-tape.txt
- info on the IDE ATAPI streaming tape driver
ide.txt
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
warm-plug-howto.txt
- using sysfs to remove and add IDE devices.
\ No newline at end of file
00-INDEX
- This file
acer-wmi.txt
- information on the Acer Laptop WMI Extras driver.
Makefile
- Makefile for building dslm example program.
asus-laptop.txt
- information on the Asus Laptop Extras driver.
disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
hpfall.c
- (HP) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
......
00-INDEX
- This file
leds-blinkm.txt
- Driver for BlinkM LED-devices.
leds-class.txt
- documents LED handling under Linux.
leds-lp3944.txt
......@@ -12,3 +16,7 @@ leds-lp55xx.txt
- description about lp55xx common driver.
leds-lm3556.txt
- notes on how to use the leds-lm3556 driver.
ledtrig-oneshot.txt
- One-shot LED trigger for both sporadic and dense events.
ledtrig-transient.txt
- LED Transient Trigger, one shot timer activation.
00-INDEX
- this file
README.buddha
- Amiga Buddha and Catweasel IDE Driver
kernel-options.txt
- command line options for Linux/m68k
......@@ -6,8 +6,14 @@
- information on the 3Com Etherlink III Series Ethernet cards.
6pack.txt
- info on the 6pack protocol, an alternative to KISS for AX.25
DLINK.txt
- info on the D-Link DE-600/DE-620 parallel port pocket adapters
LICENSE.qla3xxx
- GPLv2 for QLogic Linux Networking HBA Driver
LICENSE.qlge
- GPLv2 for QLogic Linux qlge NIC Driver
LICENSE.qlcnic
- GPLv2 for QLogic Linux qlcnic NIC Driver
Makefile
- Makefile for docsrc.
PLIP.txt
- PLIP: The Parallel Line Internet Protocol device driver
README.ipw2100
......@@ -17,7 +23,7 @@ README.ipw2200
README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- info on using alias network devices
- info on using alias network devices.
arcnet-hardware.txt
- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
arcnet.txt
......@@ -80,7 +86,7 @@ framerelay.txt
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
gen_stats.txt
- Generic networking statistics for netlink users.
generic_hdlc.txt
generic-hdlc.txt
- The generic High Level Data Link Control (HDLC) layer.
generic_netlink.txt
- info on Generic Netlink
......@@ -88,6 +94,8 @@ gianfar.txt
- Gianfar Ethernet Driver.
i40e.txt
- README for the Intel Ethernet Controller XL710 Driver (i40e).
i40evf.txt
- Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
ieee802154.txt
- Linux IEEE 802.15.4 implementation, API and drivers
igb.txt
......@@ -102,6 +110,8 @@ ipddp.txt
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
iphase.txt
- Interphase PCI ATM (i)Chip IA Linux driver info.
ipsec.txt
- Note on not compressing IPSec payload and resulting failed policy check.
ipv6.txt
- Options to the ipv6 kernel module.
ipvs-sysctl.txt
......@@ -120,6 +130,8 @@ lapb-module.txt
- programming information of the LAPB module.
ltpc.txt
- the Apple or Farallon LocalTalk PC card driver
mac80211-auth-assoc-deauth.txt
- authentication and association / deauth-disassoc with max80211
mac80211-injection.txt
- HOWTO use packet injection with mac80211
multiqueue.txt
......@@ -134,6 +146,10 @@ netdevices.txt
- info on network device driver functions exported to the kernel.
netif-msg.txt
- Design of the network interface message level setting (NETIF_MSG_*).
netlink_mmap.txt
- memory mapped I/O with netlink
nf_conntrack-sysctl.txt
- list of netfilter-sysctl knobs.
nfc.txt
- The Linux Near Field Communication (NFS) subsystem.
openvswitch.txt
......@@ -176,7 +192,7 @@ skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
- the driver for SMC's 9000 series of Ethernet cards
spider-net.txt
spider_net.txt
- README for the Spidernet Driver (as found in PS3 / Cell BE).
stmmac.txt
- README for the STMicro Synopsys Ethernet driver.
......@@ -188,6 +204,8 @@ tcp.txt
- short blurb on how TCP output takes place.
tcp-thin.txt
- kernel tuning options for low rate 'thin' TCP streams.
team.txt
- pointer to information for ethernet teaming devices.
tlan.txt
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
tproxy.txt
......@@ -200,6 +218,8 @@ vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
vxge.txt
- README for the Neterion X3100 PCIe Server Adapter.
vxlan.txt
- Virtual extensible LAN overview
x25.txt
- general info on X.25 development.
x25-iface.txt
......
......@@ -4,6 +4,8 @@ apm-acpi.txt
- basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
charger-manager.txt
- Battery charger management.
devices.txt
- How drivers interact with system-wide power management
drivers-testing.txt
......@@ -22,6 +24,8 @@ pm_qos_interface.txt
- info on Linux PM Quality of Service interface
power_supply_class.txt
- Tells userspace about battery, UPS, AC or DC power supply properties
runtime_pm.txt
- Power management framework for I/O devices.
s2ram.txt
- How to get suspend to ram working (and debug it when it isn't)
states.txt
......@@ -38,7 +42,5 @@ tricks.txt
- How to trick software suspend (to disk) into working when it isn't
userland-swsusp.txt
- Experimental implementation of software suspend in userspace
video_extension.txt
- ACPI video extensions
video.txt
- Video issues during resume from suspend
......@@ -16,11 +16,13 @@ Debugging390.txt
- hints for debugging on s390 systems.
driver-model.txt
- information on s390 devices and the driver model.
kvm.txt
- ioctl calls to /dev/kvm on s390.
monreader.txt
- information on accessing the z/VM monitor stream from Linux.
qeth.txt
- HiperSockets Bridge Port Support.
s390dbf.txt
- information on using the s390 debug feature.
TAPE
- information on the driver for channel-attached tapes.
zfcpdump
zfcpdump.txt
- information on the s390 SCSI dump tool.
......@@ -2,6 +2,8 @@
- this file.
sched-arch.txt
- CPU Scheduler implementation hints for architecture specific code.
sched-bwc.txt
- CFS bandwidth control overview.
sched-design-CFS.txt
- goals, design and implementation of the Completely Fair Scheduler.
sched-domains.txt
......
......@@ -36,6 +36,8 @@ NinjaSCSI.txt
- info on WorkBiT NinjaSCSI-32/32Bi driver
aacraid.txt
- Driver supporting Adaptec RAID controllers
advansys.txt
- List of Advansys Host Adapters
aha152x.txt
- info on driver for Adaptec AHA152x based adapters
aic79xx.txt
......@@ -44,6 +46,12 @@ aic7xxx.txt
- info on driver for Adaptec controllers
arcmsr_spec.txt
- ARECA FIRMWARE SPEC (for IOP331 adapter)
bfa.txt
- Brocade FC/FCOE adapter driver.
bnx2fc.txt
- FCoE hardware offload for Broadcom network interfaces.
cxgb3i.txt
- Chelsio iSCSI Linux Driver
dc395x.txt
- README file for the dc395x SCSI driver
dpti.txt
......@@ -52,18 +60,24 @@ dtc3x80.txt
- info on driver for DTC 2x80 based adapters
g_NCR5380.txt
- info on driver for NCR5380 and NCR53c400 based adapters
hpsa.txt
- HP Smart Array Controller SCSI driver.
hptiop.txt
- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
in2000.txt
- info on in2000 driver
libsas.txt
- Serial Attached SCSI management layer.
link_power_management_policy.txt
- Link power management options.
lpfc.txt
- LPFC driver release notes
megaraid.txt
- Common Management Module, shared code handling ioctls for LSI drivers
ncr53c8xx.txt
- info on driver for NCR53c8xx based adapters
osd.txt
Object-Based Storage Device, command set introduction.
osst.txt
- info on driver for OnStream SC-x0 SCSI tape
ppa.txt
......@@ -74,6 +88,8 @@ scsi-changer.txt
- README for the SCSI media changer driver
scsi-generic.txt
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
scsi-parameters.txt
- List of SCSI-parameters to pass to the kernel at module load-time.
scsi.txt
- short blurb on using SCSI support as a module.
scsi_mid_low_api.txt
......
......@@ -4,10 +4,12 @@ README.cycladesZ
- info on Cyclades-Z firmware loading.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
hayes-esp.txt
- info on using the Hayes ESP serial driver.
driver
- intro to the low level serial driver.
moxa-smartio
- file with info on installing/using Moxa multiport serial driver.
n_gsm.txt
- GSM 0710 tty multiplexer howto.
riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt
......
00-INDEX
- this file.
Makefile
- Makefile for the example sourcefiles.
butterfly
- AVR Butterfly SPI driver overview and pin configuration.
ep93xx_spi
- Basic EP93xx SPI driver configuration.
pxa2xx
- PXA2xx SPI master controller build by spi_message fifo wq
spidev
- Intro to the userspace API for spi devices
spidev_fdx.c
- spidev example file
spi-lm70llp
- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
spi-sc18is602
- NXP SC18IS602/603 I2C-bus to SPI bridge
spi-summary
- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
spidev_test.c
- SPI testing utility.
......@@ -8,6 +8,8 @@ hpet_example.c
- sample hpet timer test program
hrtimers.txt
- subsystem for high-resolution kernel timers
Makefile
- Build and link hpet_example
NO_HZ.txt
- Summary of the different methods for the scheduler clock-interrupts management.
timers-howto.txt
......
......@@ -20,5 +20,7 @@ ppc-pv.txt
- the paravirtualization interface on PowerPC.
review-checklist.txt
- review checklist for KVM patches.
s390-diag.txt
- Diagnose hypercall description (for IBM S/390)
timekeeping.txt
- timekeeping virtualization for x86-based architectures.
......@@ -16,8 +16,6 @@ hwpoison.txt
- explains what hwpoison is
ksm.txt
- how to use the Kernel Samepage Merging feature.
locking
- info on how locking and synchronization is done in the Linux vm code.
numa
- information about NUMA specific code in the Linux vm.
numa_memory_policy.txt
......@@ -32,6 +30,8 @@ slub.txt
- a short users guide for SLUB.
soft-dirty.txt
- short explanation for soft-dirty PTEs
split_page_table_lock
- Separate per-table lock to improve scalability of the old page_table_lock.
transhuge.txt
- Transparent Hugepage Support, alternative way of using hugepages.
unevictable-lru.txt
......
......@@ -4,7 +4,9 @@ ds2482
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
ds2490
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
mxc_w1
mxc-w1
- W1 master controller driver found on Freescale MX2/MX3 SoCs
omap-hdq
- HDQ/1-wire module of TI OMAP 2430/3430.
w1-gpio
- GPIO 1-wire bus master driver.
......@@ -4,3 +4,5 @@ w1_therm
- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
w1_ds2423
- The Maxim/Dallas Semiconductor ds2423 counter device.
w1_ds28e04
- The Maxim/Dallas Semiconductor ds28e04 eeprom.
00-INDEX
- this file
mtrr.txt
- how to use x86 Memory Type Range Registers to increase performance
boot.txt
- List of boot protocol versions
early-microcode.txt
- How to load microcode from an initrd-CPIO archive early to fix CPU issues.
earlyprintk.txt
- Using earlyprintk with a USB2 debug port key.
entry_64.txt
- Describe (some of the) kernel entry points for x86.
exception-tables.txt
- why and how Linux kernel uses exception tables on x86
mtrr.txt
- how to use x86 Memory Type Range Registers to increase performance
pat.txt
- Page Attribute Table intro and API
usb-legacy-support.txt
- how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
zero-page.txt
- layout of the first page of memory.
......@@ -445,10 +445,20 @@ static inline int pte_same(pte_t a, pte_t b)
return a.pte == b.pte;
}
static inline int pteval_present(pteval_t pteval)
{
/*
* Yes Linus, _PAGE_PROTNONE == _PAGE_NUMA. Expressing it this
* way clearly states that the intent is that protnone and numa
* hinting ptes are considered present for the purposes of
* pagetable operations like zapping, protection changes, gup etc.
*/
return pteval & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA);
}
static inline int pte_present(pte_t a)
{
return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE |
_PAGE_NUMA);
return pteval_present(pte_flags(a));
}
#define pte_accessible pte_accessible
......
......@@ -365,7 +365,7 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
/* Assume pteval_t is equivalent to all the other *val_t types. */
static pteval_t pte_mfn_to_pfn(pteval_t val)
{
if (val & _PAGE_PRESENT) {
if (pteval_present(val)) {
unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
unsigned long pfn = mfn_to_pfn(mfn);
......@@ -381,7 +381,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
static pteval_t pte_pfn_to_mfn(pteval_t val)
{
if (val & _PAGE_PRESENT) {
if (pteval_present(val)) {
unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
pteval_t flags = val & PTE_FLAGS_MASK;
unsigned long mfn;
......
......@@ -61,7 +61,7 @@ static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
ret = kstrtol(val, 0, &l);
if (ret)
return ret;
if ((int)l != l)
if (!l || ((int)l != l))
return -EINVAL;
*((int *)kp->arg) = l;
......
......@@ -194,7 +194,7 @@ static bool btree_ptr_bad_expensive(struct btree *b, const struct bkey *k)
mutex_unlock(&b->c->bucket_lock);
bch_extent_to_text(buf, sizeof(buf), k);
btree_bug(b,
"inconsistent btree pointer %s: bucket %li pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
"inconsistent btree pointer %s: bucket %zi pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
buf, PTR_BUCKET_NR(b->c, k, i), atomic_read(&g->pin),
g->prio, g->gen, g->last_gc, GC_MARK(g), g->gc_gen);
return true;
......
......@@ -754,19 +754,19 @@ static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd,
unsigned long arg)
{
int ret;
mutex_lock(&i2o_cfg_mutex);
switch (cmd) {
case I2OGETIOPS:
ret = i2o_cfg_ioctl(file, cmd, arg);
break;
case I2OPASSTHRU32:
mutex_lock(&i2o_cfg_mutex);
ret = i2o_cfg_passthru32(file, cmd, arg);
mutex_unlock(&i2o_cfg_mutex);
break;
default:
ret = -ENOIOCTLCMD;
break;
}
mutex_unlock(&i2o_cfg_mutex);
return ret;
}
......
......@@ -139,8 +139,11 @@ static int gru_dump_context(struct gru_state *gru, int ctxnum,
ubuf += sizeof(hdr);
ubufcch = ubuf;
if (gru_user_copy_handle(&ubuf, cch))
goto fail;
if (gru_user_copy_handle(&ubuf, cch)) {
if (cch_locked)
unlock_cch_handle(cch);
return -EFAULT;
}
if (cch_locked)
ubufcch->delresp = 0;
bytes = sizeof(hdr) + GRU_CACHE_LINE_BYTES;
......@@ -179,10 +182,6 @@ static int gru_dump_context(struct gru_state *gru, int ctxnum,
ret = -EFAULT;
return ret ? ret : bytes;
fail:
unlock_cch_handle(cch);
return -EFAULT;
}
int gru_dump_chiplet_request(unsigned long arg)
......
......@@ -34,7 +34,7 @@ static void *alloc_fdmem(size_t size)
* vmalloc() if the allocation size will be considered "large" by the VM.
*/
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY);
if (data != NULL)
return data;
}
......
......@@ -1846,6 +1846,11 @@ int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
GFP_KERNEL)) {
SetPageUptodate(page);
unlock_page(page);
/*
* add_to_page_cache_lru() grabs an extra page refcount.
* Drop it here to avoid leaking this page later.
*/
page_cache_release(page);
} else
__free_page(page);
......
......@@ -7158,7 +7158,7 @@ int ocfs2_truncate_inline(struct inode *inode, struct buffer_head *di_bh,
if (end > i_size_read(inode))
end = i_size_read(inode);
BUG_ON(start >= end);
BUG_ON(start > end);
if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) ||
!(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL) ||
......
......@@ -185,6 +185,9 @@ static int ocfs2_sync_file(struct file *file, loff_t start, loff_t end,
file->f_path.dentry->d_name.name,
(unsigned long long)datasync);
if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
return -EROFS;
err = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (err)
return err;
......@@ -474,11 +477,6 @@ static int ocfs2_truncate_file(struct inode *inode,
goto bail;
}
/* lets handle the simple truncate cases before doing any more
* cluster locking. */
if (new_i_size == le64_to_cpu(fe->i_size))
goto bail;
down_write(&OCFS2_I(inode)->ip_alloc_sem);
ocfs2_resv_discard(&osb->osb_la_resmap,
......@@ -718,7 +716,8 @@ static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
* While a write will already be ordering the data, a truncate will not.
* Thus, we need to explicitly order the zeroed pages.
*/
static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode,
struct buffer_head *di_bh)
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
handle_t *handle = NULL;
......@@ -735,7 +734,14 @@ static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
}
ret = ocfs2_jbd2_file_inode(handle, inode);
if (ret < 0)
if (ret < 0) {
mlog_errno(ret);
goto out;
}
ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
OCFS2_JOURNAL_ACCESS_WRITE);
if (ret)
mlog_errno(ret);
out:
......@@ -751,7 +757,7 @@ static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
* to be too fragile to do exactly what we need without us having to
* worry about recursive locking in ->write_begin() and ->write_end(). */
static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
u64 abs_to)
u64 abs_to, struct buffer_head *di_bh)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
......@@ -759,6 +765,7 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
handle_t *handle = NULL;
int ret = 0;
unsigned zero_from, zero_to, block_start, block_end;
struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
BUG_ON(abs_from >= abs_to);
BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
......@@ -801,7 +808,8 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
}
if (!handle) {
handle = ocfs2_zero_start_ordered_transaction(inode);
handle = ocfs2_zero_start_ordered_transaction(inode,
di_bh);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
handle = NULL;
......@@ -818,8 +826,22 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
ret = 0;
}
if (handle)
if (handle) {
/*
* fs-writeback will release the dirty pages without page lock
* whose offset are over inode size, the release happens at
* block_write_full_page_endio().
*/
i_size_write(inode, abs_to);
inode->i_blocks = ocfs2_inode_sector_count(inode);
di->i_size = cpu_to_le64((u64)i_size_read(inode));
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
di->i_mtime_nsec = di->i_ctime_nsec;
ocfs2_journal_dirty(handle, di_bh);
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
}
out_unlock:
unlock_page(page);
......@@ -915,7 +937,7 @@ static int ocfs2_zero_extend_get_range(struct inode *inode,
* has made sure that the entire range needs zeroing.
*/
static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
u64 range_end)
u64 range_end, struct buffer_head *di_bh)
{
int rc = 0;
u64 next_pos;
......@@ -931,7 +953,7 @@ static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
if (next_pos > range_end)
next_pos = range_end;
rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
rc = ocfs2_write_zero_page(inode, zero_pos, next_pos, di_bh);
if (rc < 0) {
mlog_errno(rc);
break;
......@@ -977,7 +999,7 @@ int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
range_end = zero_to_size;
ret = ocfs2_zero_extend_range(inode, range_start,
range_end);
range_end, di_bh);
if (ret) {
mlog_errno(ret);
break;
......@@ -1145,14 +1167,14 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
goto bail_unlock_rw;
}
if (size_change && attr->ia_size != i_size_read(inode)) {
if (size_change) {
status = inode_newsize_ok(inode, attr->ia_size);
if (status)
goto bail_unlock;
inode_dio_wait(inode);
if (i_size_read(inode) > attr->ia_size) {
if (i_size_read(inode) >= attr->ia_size) {
if (ocfs2_should_order_data(inode)) {
status = ocfs2_begin_ordered_truncate(inode,
attr->ia_size);
......
......@@ -664,6 +664,7 @@ static int ocfs2_link(struct dentry *old_dentry,
struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
struct ocfs2_dir_lookup_result lookup = { NULL, };
sigset_t oldset;
u64 old_de_ino;
trace_ocfs2_link((unsigned long long)OCFS2_I(inode)->ip_blkno,
old_dentry->d_name.len, old_dentry->d_name.name,
......@@ -686,6 +687,22 @@ static int ocfs2_link(struct dentry *old_dentry,
goto out;
}
err = ocfs2_lookup_ino_from_name(dir, old_dentry->d_name.name,
old_dentry->d_name.len, &old_de_ino);
if (err) {
err = -ENOENT;
goto out;
}
/*
* Check whether another node removed the source inode while we
* were in the vfs.
*/
if (old_de_ino != OCFS2_I(inode)->ip_blkno) {
err = -ENOENT;
goto out;
}
err = ocfs2_check_dir_for_entry(dir, dentry->d_name.name,
dentry->d_name.len);
if (err)
......
......@@ -468,17 +468,24 @@ static int __init update_note_header_size_elf64(const Elf64_Ehdr *ehdr_ptr)
return rc;
}
nhdr_ptr = notes_section;
while (real_sz < max_sz) {
if (nhdr_ptr->n_namesz == 0)
break;
while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf64_Nhdr) +
((nhdr_ptr->n_namesz + 3) & ~3) +
((nhdr_ptr->n_descsz + 3) & ~3);
if ((real_sz + sz) > max_sz) {
pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
break;
}
real_sz += sz;
nhdr_ptr = (Elf64_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
phdr_ptr->p_memsz = real_sz;
if (real_sz == 0) {
pr_warn("Warning: Zero PT_NOTE entries found\n");
return -EINVAL;
}
}
return 0;
......@@ -648,17 +655,24 @@ static int __init update_note_header_size_elf32(const Elf32_Ehdr *ehdr_ptr)
return rc;
}
nhdr_ptr = notes_section;
while (real_sz < max_sz) {
if (nhdr_ptr->n_namesz == 0)
break;
while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf32_Nhdr) +
((nhdr_ptr->n_namesz + 3) & ~3) +
((nhdr_ptr->n_descsz + 3) & ~3);
if ((real_sz + sz) > max_sz) {
pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
break;
}
real_sz += sz;
nhdr_ptr = (Elf32_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
phdr_ptr->p_memsz = real_sz;
if (real_sz == 0) {
pr_warn("Warning: Zero PT_NOTE entries found\n");
return -EINVAL;
}
}
return 0;
......
......@@ -188,6 +188,9 @@ static inline void kick_all_cpus_sync(void) { }
*/
extern void arch_disable_smp_support(void);
extern void arch_enable_nonboot_cpus_begin(void);
extern void arch_enable_nonboot_cpus_end(void);
void smp_setup_processor_id(void);
#endif /* __LINUX_SMP_H */
......@@ -945,8 +945,10 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
* to it. Similarly, page lock is shifted.
*/
if (hpage != p) {
if (!(flags & MF_COUNT_INCREASED)) {
put_page(hpage);
get_page(p);
}
lock_page(p);
unlock_page(hpage);
*hpagep = p;
......
......@@ -1004,21 +1004,19 @@ static inline void slab_free_hook(struct kmem_cache *s, void *x)
static void add_full(struct kmem_cache *s,
struct kmem_cache_node *n, struct page *page)
{
lockdep_assert_held(&n->list_lock);
if (!(s->flags & SLAB_STORE_USER))
return;
lockdep_assert_held(&n->list_lock);
list_add(&page->lru, &n->full);
}
static void remove_full(struct kmem_cache *s, struct kmem_cache_node *n, struct page *page)
{
lockdep_assert_held(&n->list_lock);
if (!(s->flags & SLAB_STORE_USER))
return;
lockdep_assert_held(&n->list_lock);
list_del(&page->lru);
}
......@@ -1520,11 +1518,9 @@ static void discard_slab(struct kmem_cache *s, struct page *page)
/*
* Management of partially allocated slabs.
*/
static inline void add_partial(struct kmem_cache_node *n,
struct page *page, int tail)
static inline void
__add_partial(struct kmem_cache_node *n, struct page *page, int tail)
{
lockdep_assert_held(&n->list_lock);
n->nr_partial++;
if (tail == DEACTIVATE_TO_TAIL)
list_add_tail(&page->lru, &n->partial);
......@@ -1532,15 +1528,27 @@ static inline void add_partial(struct kmem_cache_node *n,
list_add(&page->lru, &n->partial);
}
static inline void remove_partial(struct kmem_cache_node *n,
struct page *page)
static inline void add_partial(struct kmem_cache_node *n,
struct page *page, int tail)
{
lockdep_assert_held(&n->list_lock);
__add_partial(n, page, tail);
}
static inline void
__remove_partial(struct kmem_cache_node *n, struct page *page)
{
list_del(&page->lru);
n->nr_partial--;
}
static inline void remove_partial(struct kmem_cache_node *n,
struct page *page)
{
lockdep_assert_held(&n->list_lock);
__remove_partial(n, page);
}
/*
* Remove slab from the partial list, freeze it and
* return the pointer to the freelist.
......@@ -2906,12 +2914,10 @@ static void early_kmem_cache_node_alloc(int node)
inc_slabs_node(kmem_cache_node, node, page->objects);
/*
* the lock is for lockdep's sake, not for any actual
* race protection
* No locks need to be taken here as it has just been
* initialized and there is no concurrent access.
*/
spin_lock(&n->list_lock);
add_partial(n, page, DEACTIVATE_TO_HEAD);
spin_unlock(&n->list_lock);
__add_partial(n, page, DEACTIVATE_TO_HEAD);
}
static void free_kmem_cache_nodes(struct kmem_cache *s)
......@@ -3197,7 +3203,7 @@ static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n)
list_for_each_entry_safe(page, h, &n->partial, lru) {
if (!page->inuse) {
remove_partial(n, page);
__remove_partial(n, page);
discard_slab(s, page);
} else {
list_slab_objects(s, page,
......
......@@ -471,7 +471,7 @@ sub seed_camelcase_includes {
$camelcase_seeded = 1;
if (-d ".git") {
if (-e ".git") {
my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`;
chomp $git_last_include_commit;
$camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit";
......@@ -499,7 +499,7 @@ sub seed_camelcase_includes {
return;
}
if (-d ".git") {
if (-e ".git") {
$files = `git ls-files "include/*.h"`;
@include_files = split('\n', $files);
}
......
......@@ -95,7 +95,7 @@ my %VCS_cmds;
my %VCS_cmds_git = (
"execute_cmd" => \&git_execute_cmd,
"available" => '(which("git") ne "") && (-d ".git")',
"available" => '(which("git") ne "") && (-e ".git")',
"find_signers_cmd" =>
"git log --no-color --follow --since=\$email_git_since " .
'--numstat --no-merges ' .
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment