Skip to content

L
linux
Commit 67971c38 authored by Jakub Kicinski's avatar Jakub Kicinski
Browse files
Options

Merge branch 'selftests-mlxsw-convert-to-iproute2-dcb' 

Petr Machata says:

====================
selftests: mlxsw: Convert to iproute2 dcb

There is a dedicated tool for configuration of DCB in iproute2. Use it
in the selftests instead of lldpad.

Patches #1-#3 convert three tests. Patch #4 drops the now-unnecessary
lldpad helpers.
====================

Link: https://lore.kernel.org/r/cover.1675096231.git.petrm@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents 88b49402 bd32ff68
Show whitespace changes
Inline Side-by-side
Showing with 27 additions and 112 deletions
tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh
View file @ 67971c38
......@@ -5,18 +5,18 @@
# prioritized according to the default priority specified at the port.
# rx_octets_prio_* counters are used to verify the prioritization.
#
# +-----------------------+
# +----------------------------------+
# | H1 |
# | + $h1 |
# | | 192.0.2.1/28 |
# +----|------------------+
# +----|-----------------------------+
# |
# +----|------------------+
# +----|-----------------------------+
# | SW | |
# | + $swp1 |
# | 192.0.2.2/28 |
# | APP=<prio>,1,0 |
# +-----------------------+
# | dcb app default-prio <prio> |
# +----------------------------------+
ALL_TESTS="
ping_ipv4
......@@ -29,42 +29,6 @@ NUM_NETIFS=2
: ${HIT_TIMEOUT:=1000} # ms
source $lib_dir/lib.sh
declare -a APP
defprio_install()
{
local dev=$1; shift
local prio=$1; shift
local app="app=$prio,1,0"
lldptool -T -i $dev -V APP $app >/dev/null
lldpad_app_wait_set $dev
APP[$prio]=$app
}
defprio_uninstall()
{
local dev=$1; shift
local prio=$1; shift
local app=${APP[$prio]}
lldptool -T -i $dev -V APP -d $app >/dev/null
lldpad_app_wait_del
unset APP[$prio]
}
defprio_flush()
{
local dev=$1; shift
local prio
if ((${#APP[@]})); then
lldptool -T -i $dev -V APP -d ${APP[@]} >/dev/null
fi
lldpad_app_wait_del
APP=()
}
h1_create()
{
simple_if_init $h1 192.0.2.1/28
......@@ -83,7 +47,7 @@ switch_create()
switch_destroy()
{
defprio_flush $swp1
dcb app flush dev $swp1 default-prio
ip addr del dev $swp1 192.0.2.2/28
ip link set dev $swp1 down
}
......@@ -124,7 +88,7 @@ __test_defprio()
RET=0
defprio_install $swp1 $prio_install
dcb app add dev $swp1 default-prio $prio_install
local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
mausezahn -q $h1 -d 100m -c 10 -t arp reply
......@@ -134,7 +98,7 @@ __test_defprio()
check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $((t1 - t0))."
log_test "Default priority $prio_install/$prio_observe"
defprio_uninstall $swp1 $prio_install
dcb app del dev $swp1 default-prio $prio_install
}
test_defprio()
......@@ -145,7 +109,7 @@ test_defprio()
__test_defprio $prio $prio
done
defprio_install $swp1 3
dcb app add dev $swp1 default-prio 3
__test_defprio 0 3
__test_defprio 1 3
__test_defprio 2 3
......@@ -153,7 +117,7 @@ test_defprio()
__test_defprio 5 5
__test_defprio 6 6
__test_defprio 7 7
defprio_uninstall $swp1 3
dcb app del dev $swp1 default-prio 3
}
trap cleanup EXIT
......
tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh
View file @ 67971c38
......@@ -20,7 +20,7 @@
# | SW | | |
# | +-|----------------------------------------------------------------|-+ |
# | | + $swp1 BR $swp2 + | |
# | | APP=0,5,10 .. 7,5,17 APP=0,5,20 .. 7,5,27 | |
# | | dcb dscp-prio 10:0...17:7 dcb dscp-prio 20:0...27:7 | |
# | +--------------------------------------------------------------------+ |
# +---------------------------------------------------------------------------+
......@@ -62,16 +62,6 @@ h2_destroy()
simple_if_fini $h2 192.0.2.2/28
}
dscp_map()
{
local base=$1; shift
local prio
for prio in {0..7}; do
echo app=$prio,5,$((base + prio))
done
}
switch_create()
{
ip link add name br1 type bridge vlan_filtering 1
......@@ -81,17 +71,14 @@ switch_create()
ip link set dev $swp2 master br1
ip link set dev $swp2 up
lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null
lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null
lldpad_app_wait_set $swp1
lldpad_app_wait_set $swp2
dcb app add dev $swp1 dscp-prio 10:0 11:1 12:2 13:3 14:4 15:5 16:6 17:7
dcb app add dev $swp2 dscp-prio 20:0 21:1 22:2 23:3 24:4 25:5 26:6 27:7
}
switch_destroy()
{
lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null
lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null
lldpad_app_wait_del
dcb app del dev $swp2 dscp-prio 20:0 21:1 22:2 23:3 24:4 25:5 26:6 27:7
dcb app del dev $swp1 dscp-prio 10:0 11:1 12:2 13:3 14:4 15:5 16:6 17:7
ip link set dev $swp2 down
ip link set dev $swp2 nomaster
......
tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh
View file @ 67971c38
......@@ -94,16 +94,6 @@ h2_destroy()
simple_if_fini $h2 192.0.2.18/28
}
dscp_map()
{
local base=$1; shift
local prio
for prio in {0..7}; do
echo app=$prio,5,$((base + prio))
done
}
switch_create()
{
simple_if_init $swp1 192.0.2.2/28
......@@ -112,17 +102,14 @@ switch_create()
tc qdisc add dev $swp1 clsact
tc qdisc add dev $swp2 clsact
lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null
lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null
lldpad_app_wait_set $swp1
lldpad_app_wait_set $swp2
dcb app add dev $swp1 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
dcb app add dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
}
switch_destroy()
{
lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null
lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null
lldpad_app_wait_del
dcb app del dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
dcb app del dev $swp1 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
tc qdisc del dev $swp2 clsact
tc qdisc del dev $swp1 clsact
......@@ -265,13 +252,11 @@ test_dscp_leftover()
{
echo "Test that last removed DSCP rule is deconfigured correctly"
lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null
lldpad_app_wait_del
dcb app del dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
__test_update 0 zero
lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null
lldpad_app_wait_set $swp2
dcb app add dev $swp2 dscp-prio 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
}
trap cleanup EXIT
......
tools/testing/selftests/net/forwarding/lib.sh
View file @ 67971c38
......@@ -524,27 +524,6 @@ cmd_jq()
[ ! -z "$output" ]
}
lldpad_app_wait_set()
{
local dev=$1; shift
while lldptool -t -i $dev -V APP -c app | grep -Eq "pending|unknown"; do
echo "$dev: waiting for lldpad to push pending APP updates"
sleep 5
done
}
lldpad_app_wait_del()
{
# Give lldpad a chance to push down the changes. If the device is downed
# too soon, the updates will be left pending. However, they will have
# been struck off the lldpad's DB already, so we won't be able to tell
# they are pending. Then on next test iteration this would cause
# weirdness as newly-added APP rules conflict with the old ones,
# sometimes getting stuck in an "unknown" state.
sleep 5
}
pre_cleanup()
{
if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7