drm: xlnx: zynqmp_dpsub: Set layer mode during creation

Set layer mode of operation (live or dma-based) during layer creation.

Each DPSUB layer mode of operation is defined by corresponding DT node port
connection, so it is possible to assign it during layer object creation.
Previously it was set in layer enable functions, although it is too late
as setting layer format depends on layer mode, and should be done before
given layer enabled.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-1-c7f379b7168e@amd.com

drivers/gpu/drm/xlnx/zynqmp_disp.c

@@ -64,6 +64,16 @@
 
 #define ZYNQMP_DISP_MAX_NUM_SUB_PLANES			3
 
+/**
+ * enum zynqmp_dpsub_layer_mode - Layer mode
+ * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
+ * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
+ */
+enum zynqmp_dpsub_layer_mode {
+	ZYNQMP_DPSUB_LAYER_NONLIVE,
+	ZYNQMP_DPSUB_LAYER_LIVE,
+};
+
 /**
  * struct zynqmp_disp_format - Display subsystem format information
  * @drm_fmt: DRM format (4CC)
@@ -902,15 +912,12 @@ u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
 /**
  * zynqmp_disp_layer_enable - Enable a layer
  * @layer: The layer
- * @mode: Operating mode of layer
  *
  * Enable the @layer in the audio/video buffer manager and the blender. DMA
  * channels are started separately by zynqmp_disp_layer_update().
  */
-void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
-			      enum zynqmp_dpsub_layer_mode mode)
+void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer)
 {
-	layer->mode = mode;
 	zynqmp_disp_avbuf_enable_video(layer->disp, layer);
 	zynqmp_disp_blend_layer_enable(layer->disp, layer);
 }
@@ -1134,6 +1141,12 @@ static int zynqmp_disp_create_layers(struct zynqmp_disp *disp)
 		layer->id = i;
 		layer->disp = disp;
 		layer->info = &layer_info[i];
+		/*
+		 * For now assume dpsub works in either live or non-live mode for both layers.
+		 * Hybrid mode is not supported yet.
+		 */
+		layer->mode = disp->dpsub->dma_enabled ? ZYNQMP_DPSUB_LAYER_NONLIVE
+						       : ZYNQMP_DPSUB_LAYER_LIVE;
 
 		ret = zynqmp_disp_layer_request_dma(disp, layer);
 		if (ret)

drivers/gpu/drm/xlnx/zynqmp_disp.h

@@ -42,16 +42,6 @@ enum zynqmp_dpsub_layer_id {
 	ZYNQMP_DPSUB_LAYER_GFX,
 };
 
-/**
- * enum zynqmp_dpsub_layer_mode - Layer mode
- * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
- * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
- */
-enum zynqmp_dpsub_layer_mode {
-	ZYNQMP_DPSUB_LAYER_NONLIVE,
-	ZYNQMP_DPSUB_LAYER_LIVE,
-};
-
 void zynqmp_disp_enable(struct zynqmp_disp *disp);
 void zynqmp_disp_disable(struct zynqmp_disp *disp);
 int zynqmp_disp_setup_clock(struct zynqmp_disp *disp,
@@ -62,8 +52,7 @@ void zynqmp_disp_blend_set_global_alpha(struct zynqmp_disp *disp,
 
 u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
 				   unsigned int *num_formats);
-void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
-			      enum zynqmp_dpsub_layer_mode mode);
+void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
 void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
 void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
 				  const struct drm_format_info *info);

drivers/gpu/drm/xlnx/zynqmp_dp.c

@@ -1295,7 +1295,7 @@ static void zynqmp_dp_disp_enable(struct zynqmp_dp *dp,
 	/* TODO: Make the format configurable. */
 	info = drm_format_info(DRM_FORMAT_YUV422);
 	zynqmp_disp_layer_set_format(layer, info);
-	zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_LIVE);
+	zynqmp_disp_layer_enable(layer);
 
 	if (layer_id == ZYNQMP_DPSUB_LAYER_GFX)
 		zynqmp_disp_blend_set_global_alpha(dp->dpsub->disp, true, 255);

drivers/gpu/drm/xlnx/zynqmp_kms.c

@@ -122,7 +122,7 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
 
 	/* Enable or re-enable the plane if the format has changed. */
 	if (format_changed)
-		zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_NONLIVE);
+		zynqmp_disp_layer_enable(layer);
 }
 
 static const struct drm_plane_helper_funcs zynqmp_dpsub_plane_helper_funcs = {