Commit 67e43de6 authored by Christian Lamparter's avatar Christian Lamparter Committed by John W. Linville

carl9170: allow users to lower output power level

This patch implements a simple way of reducing the
output power of the device by a configurable upper
limit.
Requested-by: default avatarHarshal Chhaya <harshal@gmail.com>
Signed-off-by: default avatarChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 94f90656
......@@ -559,6 +559,7 @@ int carl9170_set_hwretry_limit(struct ar9170 *ar, const u32 max_retry);
int carl9170_upload_key(struct ar9170 *ar, const u8 id, const u8 *mac,
const u8 ktype, const u8 keyidx, const u8 *keydata, const int keylen);
int carl9170_disable_key(struct ar9170 *ar, const u8 id);
int carl9170_set_mac_tpc(struct ar9170 *ar, struct ieee80211_channel *channel);
/* RX */
void carl9170_rx(struct ar9170 *ar, void *buf, unsigned int len);
......
......@@ -485,3 +485,38 @@ int carl9170_disable_key(struct ar9170 *ar, const u8 id)
return carl9170_exec_cmd(ar, CARL9170_CMD_DKEY,
sizeof(key), (u8 *)&key, 0, NULL);
}
int carl9170_set_mac_tpc(struct ar9170 *ar, struct ieee80211_channel *channel)
{
unsigned int power, chains;
if (ar->eeprom.tx_mask != 1)
chains = AR9170_TX_PHY_TXCHAIN_2;
else
chains = AR9170_TX_PHY_TXCHAIN_1;
switch (channel->band) {
case IEEE80211_BAND_2GHZ:
power = ar->power_2G_ofdm[0] & 0x3f;
break;
case IEEE80211_BAND_5GHZ:
power = ar->power_5G_leg[0] & 0x3f;
break;
default:
BUG_ON(1);
}
power = min_t(unsigned int, power, ar->hw->conf.power_level * 2);
carl9170_regwrite_begin(ar);
carl9170_regwrite(AR9170_MAC_REG_ACK_TPC,
0x3c1e | power << 20 | chains << 26);
carl9170_regwrite(AR9170_MAC_REG_RTS_CTS_TPC,
power << 5 | chains << 11 |
power << 21 | chains << 27);
carl9170_regwrite(AR9170_MAC_REG_CFEND_QOSNULL_TPC,
power << 5 | chains << 11 |
power << 21 | chains << 27);
carl9170_regwrite_finish();
return carl9170_regwrite_result();
}
......@@ -853,11 +853,6 @@ static int carl9170_op_config(struct ieee80211_hw *hw, u32 changed)
goto out;
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
/* TODO */
err = 0;
}
if (changed & IEEE80211_CONF_CHANGE_SMPS) {
/* TODO */
err = 0;
......@@ -891,6 +886,12 @@ static int carl9170_op_config(struct ieee80211_hw *hw, u32 changed)
goto out;
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
err = carl9170_set_mac_tpc(ar, ar->hw->conf.channel);
if (err)
goto out;
}
out:
mutex_unlock(&ar->mutex);
return err;
......
......@@ -1426,7 +1426,7 @@ static void carl9170_calc_ctl(struct ar9170 *ar, u32 freq, enum carl9170_bw bw)
#undef EDGES
}
static int carl9170_set_power_cal(struct ar9170 *ar, u32 freq,
static void carl9170_set_power_cal(struct ar9170 *ar, u32 freq,
enum carl9170_bw bw)
{
struct ar9170_calibration_target_power_legacy *ctpl;
......@@ -1434,7 +1434,7 @@ static int carl9170_set_power_cal(struct ar9170 *ar, u32 freq,
u8 *ctpres;
int ntargets;
int idx, i, n;
u8 ackpower, ackchains, f;
u8 f;
u8 pwr_freqs[AR5416_MAX_NUM_TGT_PWRS];
if (freq < 3000)
......@@ -1523,32 +1523,6 @@ static int carl9170_set_power_cal(struct ar9170 *ar, u32 freq,
/* calc. conformance test limits and apply to ar->power*[] */
carl9170_calc_ctl(ar, freq, bw);
/* set ACK/CTS TX power */
carl9170_regwrite_begin(ar);
if (ar->eeprom.tx_mask != 1)
ackchains = AR9170_TX_PHY_TXCHAIN_2;
else
ackchains = AR9170_TX_PHY_TXCHAIN_1;
if (freq < 3000)
ackpower = ar->power_2G_ofdm[0] & 0x3f;
else
ackpower = ar->power_5G_leg[0] & 0x3f;
carl9170_regwrite(AR9170_MAC_REG_ACK_TPC,
0x3c1e | ackpower << 20 | ackchains << 26);
carl9170_regwrite(AR9170_MAC_REG_RTS_CTS_TPC,
ackpower << 5 | ackchains << 11 |
ackpower << 21 | ackchains << 27);
carl9170_regwrite(AR9170_MAC_REG_CFEND_QOSNULL_TPC,
ackpower << 5 | ackchains << 11 |
ackpower << 21 | ackchains << 27);
carl9170_regwrite_finish();
return carl9170_regwrite_result();
}
int carl9170_get_noisefloor(struct ar9170 *ar)
......@@ -1712,7 +1686,9 @@ int carl9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
if (err)
return err;
err = carl9170_set_power_cal(ar, channel->center_freq, bw);
carl9170_set_power_cal(ar, channel->center_freq, bw);
err = carl9170_set_mac_tpc(ar, channel);
if (err)
return err;
......
......@@ -719,6 +719,8 @@ static void carl9170_tx_rate_tpc_chains(struct ar9170 *ar,
else
*chains = AR9170_TX_PHY_TXCHAIN_2;
}
*tpc = min_t(unsigned int, *tpc, ar->hw->conf.power_level * 2);
}
static __le32 carl9170_tx_physet(struct ar9170 *ar,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment