Commit 6829f92f authored by Venu Byravarasu's avatar Venu Byravarasu Committed by Felipe Balbi

usb: phy: tegra: Add error handling & clean up.

Check return values from all GPIO APIs and handle errors accordingly.

Remove the call to clk_disable_unprepare(); this function does not
prepare or enable the clock, so the error path should not disable or
unprepare it.
Signed-off-by: default avatarVenu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 12ea18e4
......@@ -542,9 +542,17 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
unsigned long val;
void __iomem *base = phy->regs;
gpio_direction_output(phy->reset_gpio, 0);
ret = gpio_direction_output(phy->reset_gpio, 0);
if (ret < 0) {
dev_err(phy->dev, "gpio %d not set to 0\n", phy->reset_gpio);
return ret;
}
msleep(5);
gpio_direction_output(phy->reset_gpio, 1);
ret = gpio_direction_output(phy->reset_gpio, 1);
if (ret < 0) {
dev_err(phy->dev, "gpio %d not set to 1\n", phy->reset_gpio);
return ret;
}
clk_prepare_enable(phy->clk);
msleep(1);
......@@ -624,24 +632,44 @@ static int tegra_phy_init(struct usb_phy *x)
of_get_named_gpio(phy->dev->of_node,
"nvidia,phy-reset-gpio", 0);
if (!gpio_is_valid(phy->reset_gpio)) {
pr_err("%s: invalid reset gpio: %d\n", __func__,
dev_err(phy->dev, "invalid gpio: %d\n",
phy->reset_gpio);
err = -EINVAL;
goto err1;
err = phy->reset_gpio;
goto cleanup_clk_get;
}
gpio_request(phy->reset_gpio, "ulpi_phy_reset_b");
gpio_direction_output(phy->reset_gpio, 0);
err = gpio_request(phy->reset_gpio, "ulpi_phy_reset_b");
if (err < 0) {
dev_err(phy->dev, "request failed for gpio: %d\n",
phy->reset_gpio);
goto cleanup_clk_get;
}
err = gpio_direction_output(phy->reset_gpio, 0);
if (err < 0) {
dev_err(phy->dev, "gpio %d direction not set to output\n",
phy->reset_gpio);
goto cleanup_gpio_req;
}
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
if (!phy->ulpi) {
dev_err(phy->dev, "otg_ulpi_create returned NULL\n");
err = -ENOMEM;
goto cleanup_gpio_req;
}
phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
} else {
err = utmip_pad_open(phy);
if (err < 0)
goto err1;
return err;
}
return 0;
err1:
clk_disable_unprepare(phy->pll_u);
clk_put(phy->pll_u);
cleanup_gpio_req:
gpio_free(phy->reset_gpio);
cleanup_clk_get:
clk_put(phy->clk);
return err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment