mmc: tegra: Mark 64 bit dma broken on Tegra186

SDHCI controllers on Tegra186 support 40 bit addressing.
IOVA addresses are 48-bit wide on Tegra186.
SDHCI host common code sets dma mask as either 32-bit or 64-bit.
To avoid access issues when SMMU is enabled, disable 64-bit dma.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-tegra.c

@@ -422,7 +422,15 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   /* SDHCI controllers on Tegra186 support 40-bit addressing.
+		    * IOVA addresses are 48-bit wide on Tegra186.
+		    * With 64-bit dma mask used for SDHCI, accesses can
+		    * be broken. Disable 64-bit dma, which would fall back
+		    * to 32-bit dma mask. Ideally 40-bit dma mask would work,
+		    * But it is not supported as of now.
+		    */
+		   SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
 	.ops  = &tegra114_sdhci_ops,
 };