Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..

Documentation/ABI/testing/sysfs-block

@@ -213,14 +213,8 @@ What:		/sys/block/<disk>/queue/discard_zeroes_data
 Date:		May 2011
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Devices that support discard functionality may return
-		stale or random data when a previously discarded block
-		is read back. This can cause problems if the filesystem
-		expects discarded blocks to be explicitly cleared. If a
-		device reports that it deterministically returns zeroes
-		when a discarded area is read the discard_zeroes_data
-		parameter will be set to one. Otherwise it will be 0 and
-		the result of reading a discarded area is undefined.
+		Will always return 0.  Don't rely on any specific behavior
+		for discards, and don't read this file.
 
 What:		/sys/block/<disk>/queue/write_same_max_bytes
 Date:		January 2012

Documentation/block/00-INDEX

 00-INDEX
 	- This file
+bfq-iosched.txt
+	- BFQ IO scheduler and its tunables
 biodoc.txt
 	- Notes on the Generic Block Layer Rewrite in Linux 2.5
 biovecs.txt

Documentation/block/kyber-iosched.txt

+Kyber I/O scheduler tunables
+===========================
+
+The only two tunables for the Kyber scheduler are the target latencies for
+reads and synchronous writes. Kyber will throttle requests in order to meet
+these target latencies.
+
+read_lat_nsec
+-------------
+Target latency for reads (in nanoseconds).
+
+write_lat_nsec
+--------------
+Target latency for synchronous writes (in nanoseconds).

Documentation/block/queue-sysfs.txt

@@ -43,11 +43,6 @@ large discards are issued, setting this value lower will make Linux issue
 smaller discards and potentially help reduce latencies induced by large
 discard operations.
 
-discard_zeroes_data (RO)
-------------------------
-When read, this file will show if the discarded block are zeroed by the
-device or not. If its value is '1' the blocks are zeroed otherwise not.
-
 hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.
@@ -192,5 +187,11 @@ scaling back writes. Writing a value of '0' to this file disables the
 feature. Writing a value of '-1' to this file resets the value to the
 default setting.
 
+throttle_sample_time (RW)
+-------------------------
+This is the time window that blk-throttle samples data, in millisecond.
+blk-throttle makes decision based on the samplings. Lower time means cgroups
+have more smooth throughput, but higher CPU overhead. This exists only when
+CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
 
 Jens Axboe <jens.axboe@oracle.com>, February 2009

Documentation/blockdev/mflash.txt

-This document describes m[g]flash support in linux.
-
-Contents
-  1. Overview
-  2. Reserved area configuration
-  3. Example of mflash platform driver registration
-
-1. Overview
-
-Mflash and gflash are embedded flash drive. The only difference is mflash is
-MCP(Multi Chip Package) device. These two device operate exactly same way.
-So the rest mflash repersents mflash and gflash altogether.
-
-Internally, mflash has nand flash and other hardware logics and supports
-2 different operation (ATA, IO) modes. ATA mode doesn't need any new
-driver and currently works well under standard IDE subsystem. Actually it's
-one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have
-IDE interface.
-
-Following are brief descriptions about IO mode.
-A. IO mode based on ATA protocol and uses some custom command. (read confirm,
-write confirm)
-B. IO mode uses SRAM bus interface.
-C. IO mode supports 4kB boot area, so host can boot from mflash.
-
-2. Reserved area configuration
-If host boot from mflash, usually needs raw area for boot loader image. All of
-the mflash's block device operation will be taken this value as start offset.
-Note that boot loader's size of reserved area and kernel configuration value
-must be same.
-
-3. Example of mflash platform driver registration
-Working mflash is very straight forward. Adding platform device stuff to board
-configuration file is all. Here is some pseudo example.
-
-static struct mg_drv_data mflash_drv_data = {
-	/* If you want to polling driver set to 1 */
-	.use_polling = 0,
-	/* device attribution */
-	.dev_attr = MG_BOOT_DEV
-};
-
-static struct resource mg_mflash_rsc[] = {
-	/* Base address of mflash */
-	[0] = {
-		.start = 0x08000000,
-		.end = 0x08000000 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM
-	},
-	/* mflash interrupt pin */
-	[1] = {
-		.start = IRQ_GPIO(84),
-		.end = IRQ_GPIO(84),
-		.flags = IORESOURCE_IRQ
-	},
-	/* mflash reset pin */
-	[2] = {
-		.start = 43,
-		.end = 43,
-		.name = MG_RST_PIN,
-		.flags = IORESOURCE_IO
-	},
-	/* mflash reset-out pin
-	 * If you use mflash as storage device (i.e. other than MG_BOOT_DEV),
-	 * should assign this */
-	[3] = {
-		.start = 51,
-		.end = 51,
-		.name = MG_RSTOUT_PIN,
-		.flags = IORESOURCE_IO
-	}
-};
-
-static struct platform_device mflash_dev = {
-	.name = MG_DEV_NAME,
-	.id = -1,
-	.dev = {
-		.platform_data = &mflash_drv_data,
-	},
-	.num_resources = ARRAY_SIZE(mg_mflash_rsc),
-	.resource = mg_mflash_rsc
-};
-
-platform_device_register(&mflash_dev);

Documentation/lightnvm/pblk.txt

+pblk: Physical Block Device Target
+==================================
+
+pblk implements a fully associative, host-based FTL that exposes a traditional
+block I/O interface. Its primary responsibilities are:
+
+  - Map logical addresses onto physical addresses (4KB granularity) in a
+    logical-to-physical (L2P) table.
+  - Maintain the integrity and consistency of the L2P table as well as its
+    recovery from normal tear down and power outage.
+  - Deal with controller- and media-specific constrains.
+  - Handle I/O errors.
+  - Implement garbage collection.
+  - Maintain consistency across the I/O stack during synchronization points.
+
+For more information please refer to:
+
+  http://lightnvm.io
+
+which maintains updated FAQs, manual pages, technical documentation, tools,
+contacts, etc.

MAINTAINERS

@@ -2544,6 +2544,14 @@ F:	block/
 F:	kernel/trace/blktrace.c
 F:	lib/sbitmap.c
 
+BFQ I/O SCHEDULER
+M:	Paolo Valente <paolo.valente@linaro.org>
+M:	Jens Axboe <axboe@kernel.dk>
+L:	linux-block@vger.kernel.org
+S:	Maintained
+F:	block/bfq-*
+F:	Documentation/block/bfq-iosched.txt
+
 BLOCK2MTD DRIVER
 M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org

block/Kconfig

@@ -115,6 +115,18 @@ config BLK_DEV_THROTTLING
 
 	See Documentation/cgroups/blkio-controller.txt for more information.
 
+config BLK_DEV_THROTTLING_LOW
+	bool "Block throttling .low limit interface support (EXPERIMENTAL)"
+	depends on BLK_DEV_THROTTLING
+	default n
+	---help---
+	Add .low limit interface for block throttling. The low limit is a best
+	effort limit to prioritize cgroups. Depending on the setting, the limit
+	can be used to protect cgroups in terms of bandwidth/iops and better
+	utilize disk resource.
+
+	Note, this is an experimental interface and could be changed someday.
+
 config BLK_CMDLINE_PARSER
 	bool "Block device command line partition parser"
 	default n

block/Kconfig.iosched

@@ -40,6 +40,7 @@ config CFQ_GROUP_IOSCHED
 	  Enable group IO scheduling in CFQ.
 
 choice
+
 	prompt "Default I/O scheduler"
 	default DEFAULT_CFQ
 	help
@@ -69,6 +70,35 @@ config MQ_IOSCHED_DEADLINE
 	---help---
 	  MQ version of the deadline IO scheduler.
 
+config MQ_IOSCHED_KYBER
+	tristate "Kyber I/O scheduler"
+	default y
+	---help---
+	  The Kyber I/O scheduler is a low-overhead scheduler suitable for
+	  multiqueue and other fast devices. Given target latencies for reads and
+	  synchronous writes, it will self-tune queue depths to achieve that
+	  goal.
+
+config IOSCHED_BFQ
+	tristate "BFQ I/O scheduler"
+	default n
+	---help---
+	BFQ I/O scheduler for BLK-MQ. BFQ distributes the bandwidth of
+	of the device among all processes according to their weights,
+	regardless of the device parameters and with any workload. It
+	also guarantees a low latency to interactive and soft
+	real-time applications.  Details in
+	Documentation/block/bfq-iosched.txt
+
+config BFQ_GROUP_IOSCHED
+       bool "BFQ hierarchical scheduling support"
+       depends on IOSCHED_BFQ && BLK_CGROUP
+       default n
+       ---help---
+
+       Enable hierarchical scheduling in BFQ, using the blkio
+       (cgroups-v1) or io (cgroups-v2) controller.
+
 endmenu
 
 endif

block/Makefile

@@ -20,6 +20,9 @@ obj-$(CONFIG_IOSCHED_NOOP)	+= noop-iosched.o
 obj-$(CONFIG_IOSCHED_DEADLINE)	+= deadline-iosched.o
 obj-$(CONFIG_IOSCHED_CFQ)	+= cfq-iosched.o
 obj-$(CONFIG_MQ_IOSCHED_DEADLINE)	+= mq-deadline.o
+obj-$(CONFIG_MQ_IOSCHED_KYBER)	+= kyber-iosched.o
+bfq-y				:= bfq-iosched.o bfq-wf2q.o bfq-cgroup.o
+obj-$(CONFIG_IOSCHED_BFQ)	+= bfq.o
 
 obj-$(CONFIG_BLOCK_COMPAT)	+= compat_ioctl.o
 obj-$(CONFIG_BLK_CMDLINE_PARSER)	+= cmdline-parser.o

block/bio.c

@@ -30,6 +30,7 @@
 #include <linux/cgroup.h>
 
 #include <trace/events/block.h>
+#include "blk.h"
 
 /*
  * Test patch to inline a certain number of bi_io_vec's inside the bio
@@ -427,7 +428,8 @@ static void punt_bios_to_rescuer(struct bio_set *bs)
  *   RETURNS:
  *   Pointer to new bio on success, NULL on failure.
  */
-struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
+struct bio *bio_alloc_bioset(gfp_t gfp_mask, unsigned int nr_iovecs,
+			     struct bio_set *bs)
 {
 	gfp_t saved_gfp = gfp_mask;
 	unsigned front_pad;
@@ -1824,6 +1826,11 @@ static inline bool bio_remaining_done(struct bio *bio)
  *   bio_endio() will end I/O on the whole bio. bio_endio() is the preferred
  *   way to end I/O on a bio. No one should call bi_end_io() directly on a
  *   bio unless they own it and thus know that it has an end_io function.
+ *
+ *   bio_endio() can be called several times on a bio that has been chained
+ *   using bio_chain().  The ->bi_end_io() function will only be called the
+ *   last time.  At this point the BLK_TA_COMPLETE tracing event will be
+ *   generated if BIO_TRACE_COMPLETION is set.
  **/
 void bio_endio(struct bio *bio)
 {
@@ -1844,6 +1851,13 @@ void bio_endio(struct bio *bio)
 		goto again;
 	}
 
+	if (bio->bi_bdev && bio_flagged(bio, BIO_TRACE_COMPLETION)) {
+		trace_block_bio_complete(bdev_get_queue(bio->bi_bdev),
+					 bio, bio->bi_error);
+		bio_clear_flag(bio, BIO_TRACE_COMPLETION);
+	}
+
+	blk_throtl_bio_endio(bio);
 	if (bio->bi_end_io)
 		bio->bi_end_io(bio);
 }
@@ -1882,6 +1896,9 @@ struct bio *bio_split(struct bio *bio, int sectors,
 
 	bio_advance(bio, split->bi_iter.bi_size);
 
+	if (bio_flagged(bio, BIO_TRACE_COMPLETION))
+		bio_set_flag(bio, BIO_TRACE_COMPLETION);
+
 	return split;
 }
 EXPORT_SYMBOL(bio_split);

block/blk-cgroup.c

@@ -772,6 +772,27 @@ struct blkg_rwstat blkg_rwstat_recursive_sum(struct blkcg_gq *blkg,
 }
 EXPORT_SYMBOL_GPL(blkg_rwstat_recursive_sum);
 
+/* Performs queue bypass and policy enabled checks then looks up blkg. */
+static struct blkcg_gq *blkg_lookup_check(struct blkcg *blkcg,
+					  const struct blkcg_policy *pol,
+					  struct request_queue *q)
+{
+	WARN_ON_ONCE(!rcu_read_lock_held());
+	lockdep_assert_held(q->queue_lock);
+
+	if (!blkcg_policy_enabled(q, pol))
+		return ERR_PTR(-EOPNOTSUPP);
+
+	/*
+	 * This could be the first entry point of blkcg implementation and
+	 * we shouldn't allow anything to go through for a bypassing queue.
+	 */
+	if (unlikely(blk_queue_bypass(q)))
+		return ERR_PTR(blk_queue_dying(q) ? -ENODEV : -EBUSY);
+
+	return __blkg_lookup(blkcg, q, true /* update_hint */);
+}
+
 /**
  * blkg_conf_prep - parse and prepare for per-blkg config update
  * @blkcg: target block cgroup
@@ -789,6 +810,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
 	__acquires(rcu) __acquires(disk->queue->queue_lock)
 {
 	struct gendisk *disk;
+	struct request_queue *q;
 	struct blkcg_gq *blkg;
 	struct module *owner;
 	unsigned int major, minor;
@@ -807,24 +829,81 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
 	if (!disk)
 		return -ENODEV;
 	if (part) {
-		owner = disk->fops->owner;
-		put_disk(disk);
-		module_put(owner);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto fail;
 	}
 
+	q = disk->queue;
+
 	rcu_read_lock();
-	spin_lock_irq(disk->queue->queue_lock);
+	spin_lock_irq(q->queue_lock);
 
-	if (blkcg_policy_enabled(disk->queue, pol))
-		blkg = blkg_lookup_create(blkcg, disk->queue);
-	else
-		blkg = ERR_PTR(-EOPNOTSUPP);
+	blkg = blkg_lookup_check(blkcg, pol, q);
+	if (IS_ERR(blkg)) {
+		ret = PTR_ERR(blkg);
+		goto fail_unlock;
+	}
+
+	if (blkg)
+		goto success;
+
+	/*
+	 * Create blkgs walking down from blkcg_root to @blkcg, so that all
+	 * non-root blkgs have access to their parents.
+	 */
+	while (true) {
+		struct blkcg *pos = blkcg;
+		struct blkcg *parent;
+		struct blkcg_gq *new_blkg;
 
+		parent = blkcg_parent(blkcg);
+		while (parent && !__blkg_lookup(parent, q, false)) {
+			pos = parent;
+			parent = blkcg_parent(parent);
+		}
+
+		/* Drop locks to do new blkg allocation with GFP_KERNEL. */
+		spin_unlock_irq(q->queue_lock);
+		rcu_read_unlock();
+
+		new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
+		if (unlikely(!new_blkg)) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		rcu_read_lock();
+		spin_lock_irq(q->queue_lock);
+
+		blkg = blkg_lookup_check(pos, pol, q);
 		if (IS_ERR(blkg)) {
 			ret = PTR_ERR(blkg);
+			goto fail_unlock;
+		}
+
+		if (blkg) {
+			blkg_free(new_blkg);
+		} else {
+			blkg = blkg_create(pos, q, new_blkg);
+			if (unlikely(IS_ERR(blkg))) {
+				ret = PTR_ERR(blkg);
+				goto fail_unlock;
+			}
+		}
+
+		if (pos == blkcg)
+			goto success;
+	}
+success:
+	ctx->disk = disk;
+	ctx->blkg = blkg;
+	ctx->body = body;
+	return 0;
+
+fail_unlock:
+	spin_unlock_irq(q->queue_lock);
 	rcu_read_unlock();
-		spin_unlock_irq(disk->queue->queue_lock);
+fail:
 	owner = disk->fops->owner;
 	put_disk(disk);
 	module_put(owner);
@@ -839,12 +918,6 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
 		ret = restart_syscall();
 	}
 	return ret;
-	}
-
-	ctx->disk = disk;
-	ctx->blkg = blkg;
-	ctx->body = body;
-	return 0;
 }
 EXPORT_SYMBOL_GPL(blkg_conf_prep);
 

block/blk-core.c

@@ -268,10 +268,8 @@ void blk_sync_queue(struct request_queue *q)
 		struct blk_mq_hw_ctx *hctx;
 		int i;
 
-		queue_for_each_hw_ctx(q, hctx, i) {
-			cancel_work_sync(&hctx->run_work);
-			cancel_delayed_work_sync(&hctx->delay_work);
-		}
+		queue_for_each_hw_ctx(q, hctx, i)
+			cancel_delayed_work_sync(&hctx->run_work);
 	} else {
 		cancel_delayed_work_sync(&q->delay_work);
 	}
@@ -500,6 +498,13 @@ void blk_set_queue_dying(struct request_queue *q)
 	queue_flag_set(QUEUE_FLAG_DYING, q);
 	spin_unlock_irq(q->queue_lock);
 
+	/*
+	 * When queue DYING flag is set, we need to block new req
+	 * entering queue, so we call blk_freeze_queue_start() to
+	 * prevent I/O from crossing blk_queue_enter().
+	 */
+	blk_freeze_queue_start(q);
+
 	if (q->mq_ops)
 		blk_mq_wake_waiters(q);
 	else {
@@ -556,9 +561,13 @@ void blk_cleanup_queue(struct request_queue *q)
 	 * prevent that q->request_fn() gets invoked after draining finished.
 	 */
 	blk_freeze_queue(q);
+	if (!q->mq_ops) {
 		spin_lock_irq(lock);
-	if (!q->mq_ops)
 		__blk_drain_queue(q, true);
+	} else {
+		blk_mq_debugfs_unregister_mq(q);
+		spin_lock_irq(lock);
+	}
 	queue_flag_set(QUEUE_FLAG_DEAD, q);
 	spin_unlock_irq(lock);
 
@@ -669,6 +678,15 @@ int blk_queue_enter(struct request_queue *q, bool nowait)
 		if (nowait)
 			return -EBUSY;
 
+		/*
+		 * read pair of barrier in blk_freeze_queue_start(),
+		 * we need to order reading __PERCPU_REF_DEAD flag of
+		 * .q_usage_counter and reading .mq_freeze_depth or
+		 * queue dying flag, otherwise the following wait may
+		 * never return if the two reads are reordered.
+		 */
+		smp_rmb();
+
 		ret = wait_event_interruptible(q->mq_freeze_wq,
 				!atomic_read(&q->mq_freeze_depth) ||
 				blk_queue_dying(q));
@@ -720,6 +738,10 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
 	if (!q->backing_dev_info)
 		goto fail_split;
 
+	q->stats = blk_alloc_queue_stats();
+	if (!q->stats)
+		goto fail_stats;
+
 	q->backing_dev_info->ra_pages =
 			(VM_MAX_READAHEAD * 1024) / PAGE_SIZE;
 	q->backing_dev_info->capabilities = BDI_CAP_CGROUP_WRITEBACK;
@@ -776,6 +798,8 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
 fail_ref:
 	percpu_ref_exit(&q->q_usage_counter);
 fail_bdi:
+	blk_free_queue_stats(q->stats);
+fail_stats:
 	bdi_put(q->backing_dev_info);
 fail_split:
 	bioset_free(q->bio_split);
@@ -889,7 +913,6 @@ int blk_init_allocated_queue(struct request_queue *q)
 		q->exit_rq_fn(q, q->fq->flush_rq);
 out_free_flush_queue:
 	blk_free_flush_queue(q->fq);
-	wbt_exit(q);
 	return -ENOMEM;
 }
 EXPORT_SYMBOL(blk_init_allocated_queue);
@@ -1128,7 +1151,6 @@ static struct request *__get_request(struct request_list *rl, unsigned int op,
 
 	blk_rq_init(q, rq);
 	blk_rq_set_rl(rq, rl);
-	blk_rq_set_prio(rq, ioc);
 	rq->cmd_flags = op;
 	rq->rq_flags = rq_flags;
 
@@ -1608,17 +1630,23 @@ unsigned int blk_plug_queued_count(struct request_queue *q)
 	return ret;
 }
 
-void init_request_from_bio(struct request *req, struct bio *bio)
+void blk_init_request_from_bio(struct request *req, struct bio *bio)
 {
+	struct io_context *ioc = rq_ioc(bio);
+
 	if (bio->bi_opf & REQ_RAHEAD)
 		req->cmd_flags |= REQ_FAILFAST_MASK;
 
-	req->errors = 0;
 	req->__sector = bio->bi_iter.bi_sector;
 	if (ioprio_valid(bio_prio(bio)))
 		req->ioprio = bio_prio(bio);
+	else if (ioc)
+		req->ioprio = ioc->ioprio;
+	else
+		req->ioprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, 0);
 	blk_rq_bio_prep(req->q, req, bio);
 }
+EXPORT_SYMBOL_GPL(blk_init_request_from_bio);
 
 static blk_qc_t blk_queue_bio(struct request_queue *q, struct bio *bio)
 {
@@ -1709,7 +1737,7 @@ static blk_qc_t blk_queue_bio(struct request_queue *q, struct bio *bio)
 	 * We don't worry about that case for efficiency. It won't happen
 	 * often, and the elevators are able to handle it.
 	 */
-	init_request_from_bio(req, bio);
+	blk_init_request_from_bio(req, bio);
 
 	if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags))
 		req->cpu = raw_smp_processor_id();
@@ -1936,7 +1964,13 @@ generic_make_request_checks(struct bio *bio)
 	if (!blkcg_bio_issue_check(q, bio))
 		return false;
 
+	if (!bio_flagged(bio, BIO_TRACE_COMPLETION)) {
 		trace_block_bio_queue(q, bio);
+		/* Now that enqueuing has been traced, we need to trace
+		 * completion as well.
+		 */
+		bio_set_flag(bio, BIO_TRACE_COMPLETION);
+	}
 	return true;
 
 not_supported:
@@ -2478,7 +2512,7 @@ void blk_start_request(struct request *req)
 	blk_dequeue_request(req);
 
 	if (test_bit(QUEUE_FLAG_STATS, &req->q->queue_flags)) {
-		blk_stat_set_issue_time(&req->issue_stat);
+		blk_stat_set_issue(&req->issue_stat, blk_rq_sectors(req));
 		req->rq_flags |= RQF_STATS;
 		wbt_issue(req->q->rq_wb, &req->issue_stat);
 	}
@@ -2540,22 +2574,11 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
 {
 	int total_bytes;
 
-	trace_block_rq_complete(req->q, req, nr_bytes);
+	trace_block_rq_complete(req, error, nr_bytes);
 
 	if (!req->bio)
 		return false;
 
-	/*
-	 * For fs requests, rq is just carrier of independent bio's
-	 * and each partial completion should be handled separately.
-	 * Reset per-request error on each partial completion.
-	 *
-	 * TODO: tj: This is too subtle.  It would be better to let
-	 * low level drivers do what they see fit.
-	 */
-	if (!blk_rq_is_passthrough(req))
-		req->errors = 0;
-
 	if (error && !blk_rq_is_passthrough(req) &&
 	    !(req->rq_flags & RQF_QUIET)) {
 		char *error_type;
@@ -2601,6 +2624,8 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
 		if (bio_bytes == bio->bi_iter.bi_size)
 			req->bio = bio->bi_next;
 
+		/* Completion has already been traced */
+		bio_clear_flag(bio, BIO_TRACE_COMPLETION);
 		req_bio_endio(req, bio, bio_bytes, error);
 
 		total_bytes += bio_bytes;
@@ -2699,7 +2724,7 @@ void blk_finish_request(struct request *req, int error)
 	struct request_queue *q = req->q;
 
 	if (req->rq_flags & RQF_STATS)
-		blk_stat_add(&q->rq_stats[rq_data_dir(req)], req);
+		blk_stat_add(req);
 
 	if (req->rq_flags & RQF_QUEUED)
 		blk_queue_end_tag(q, req);
@@ -2776,7 +2801,7 @@ static bool blk_end_bidi_request(struct request *rq, int error,
  *     %false - we are done with this request
  *     %true  - still buffers pending for this request
  **/
-bool __blk_end_bidi_request(struct request *rq, int error,
+static bool __blk_end_bidi_request(struct request *rq, int error,
 				   unsigned int nr_bytes, unsigned int bidi_bytes)
 {
 	if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
@@ -2828,43 +2853,6 @@ void blk_end_request_all(struct request *rq, int error)
 }
 EXPORT_SYMBOL(blk_end_request_all);
 
-/**
- * blk_end_request_cur - Helper function to finish the current request chunk.
- * @rq: the request to finish the current chunk for
- * @error: %0 for success, < %0 for error
- *
- * Description:
- *     Complete the current consecutively mapped chunk from @rq.
- *
- * Return:
- *     %false - we are done with this request
- *     %true  - still buffers pending for this request
- */
-bool blk_end_request_cur(struct request *rq, int error)
-{
-	return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
-}
-EXPORT_SYMBOL(blk_end_request_cur);
-
-/**
- * blk_end_request_err - Finish a request till the next failure boundary.
- * @rq: the request to finish till the next failure boundary for
- * @error: must be negative errno
- *
- * Description:
- *     Complete @rq till the next failure boundary.
- *
- * Return:
- *     %false - we are done with this request
- *     %true  - still buffers pending for this request
- */
-bool blk_end_request_err(struct request *rq, int error)
-{
-	WARN_ON(error >= 0);
-	return blk_end_request(rq, error, blk_rq_err_bytes(rq));
-}
-EXPORT_SYMBOL_GPL(blk_end_request_err);
-
 /**
  * __blk_end_request - Helper function for drivers to complete the request.
  * @rq:       the request being processed
@@ -2924,26 +2912,6 @@ bool __blk_end_request_cur(struct request *rq, int error)
 }
 EXPORT_SYMBOL(__blk_end_request_cur);
 
-/**
- * __blk_end_request_err - Finish a request till the next failure boundary.
- * @rq: the request to finish till the next failure boundary for
- * @error: must be negative errno
- *
- * Description:
- *     Complete @rq till the next failure boundary.  Must be called
- *     with queue lock held.
- *
- * Return:
- *     %false - we are done with this request
- *     %true  - still buffers pending for this request
- */
-bool __blk_end_request_err(struct request *rq, int error)
-{
-	WARN_ON(error >= 0);
-	return __blk_end_request(rq, error, blk_rq_err_bytes(rq));
-}
-EXPORT_SYMBOL_GPL(__blk_end_request_err);
-
 void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 		     struct bio *bio)
 {
@@ -3106,6 +3074,13 @@ int kblockd_schedule_work_on(int cpu, struct work_struct *work)
 }
 EXPORT_SYMBOL(kblockd_schedule_work_on);
 
+int kblockd_mod_delayed_work_on(int cpu, struct delayed_work *dwork,
+				unsigned long delay)
+{
+	return mod_delayed_work_on(cpu, kblockd_workqueue, dwork, delay);
+}
+EXPORT_SYMBOL(kblockd_mod_delayed_work_on);
+
 int kblockd_schedule_delayed_work(struct delayed_work *dwork,
 				  unsigned long delay)
 {

block/blk-exec.c

@@ -69,8 +69,7 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 
 	if (unlikely(blk_queue_dying(q))) {
 		rq->rq_flags |= RQF_QUIET;
-		rq->errors = -ENXIO;
-		__blk_end_request_all(rq, rq->errors);
+		__blk_end_request_all(rq, -ENXIO);
 		spin_unlock_irq(q->queue_lock);
 		return;
 	}
@@ -92,11 +91,10 @@ EXPORT_SYMBOL_GPL(blk_execute_rq_nowait);
  *    Insert a fully prepared request at the back of the I/O scheduler queue
  *    for execution and wait for completion.
  */
-int blk_execute_rq(struct request_queue *q, struct gendisk *bd_disk,
+void blk_execute_rq(struct request_queue *q, struct gendisk *bd_disk,
 		   struct request *rq, int at_head)
 {
 	DECLARE_COMPLETION_ONSTACK(wait);
-	int err = 0;
 	unsigned long hang_check;
 
 	rq->end_io_data = &wait;
@@ -108,10 +106,5 @@ int blk_execute_rq(struct request_queue *q, struct gendisk *bd_disk,
 		while (!wait_for_completion_io_timeout(&wait, hang_check * (HZ/2)));
 	else
 		wait_for_completion_io(&wait);
-
-	if (rq->errors)
-		err = -EIO;
-
-	return err;
 }
 EXPORT_SYMBOL(blk_execute_rq);

block/blk-flush.c

@@ -447,7 +447,7 @@ void blk_insert_flush(struct request *rq)
 		if (q->mq_ops)
 			blk_mq_end_request(rq, 0);
 		else
-			__blk_end_bidi_request(rq, 0, 0, 0);
+			__blk_end_request(rq, 0, 0);
 		return;
 	}
 
@@ -497,8 +497,7 @@ void blk_insert_flush(struct request *rq)
  * Description:
  *    Issue a flush for the block device in question. Caller can supply
  *    room for storing the error offset in case of a flush error, if they
- *    wish to. If WAIT flag is not passed then caller may check only what
- *    request was pushed in some internal queue for later handling.
+ *    wish to.
  */
 int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
 		sector_t *error_sector)

block/blk-mq-pci.c

@@ -23,7 +23,7 @@
  * @pdev:	PCI device associated with @set.
  *
  * This function assumes the PCI device @pdev has at least as many available
- * interrupt vetors as @set has queues.  It will then queuery the vector
+ * interrupt vectors as @set has queues.  It will then query the vector
  * corresponding to each queue for it's affinity mask and built queue mapping
  * that maps a queue to the CPUs that have irq affinity for the corresponding
  * vector.

block/blk-mq-tag.c

@@ -96,6 +96,9 @@ static int __blk_mq_get_tag(struct blk_mq_alloc_data *data,
 	if (!(data->flags & BLK_MQ_REQ_INTERNAL) &&
 	    !hctx_may_queue(data->hctx, bt))
 		return -1;
+	if (data->shallow_depth)
+		return __sbitmap_queue_get_shallow(bt, data->shallow_depth);
+	else
 		return __sbitmap_queue_get(bt);
 }