Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (34 commits)
  [SCSI] qla2xxx: Fix NULL ptr deref bug in fail path during queue create
  [SCSI] st: fix possible memory use after free after MTSETBLK ioctl
  [SCSI] be2iscsi: Moving to pci_pools v3
  [SCSI] libiscsi: iscsi_session_setup to allow for private space
  [SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver
  [SCSI] zfcp: Fix hang when offlining device with offline chpid
  [SCSI] zfcp: Fix lockdep warning when offlining device with offline chpid
  [SCSI] zfcp: Fix oops during shutdown of offline device
  [SCSI] zfcp: Fix initial device and cfdc for delayed adapter allocation
  [SCSI] zfcp: correctly initialize unchained requests
  [SCSI] mpt2sas: Bump version 02.100.03.00
  [SCSI] mpt2sas: Support dev remove when phy status is MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT
  [SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on firmware to ACK.
  [SCSI] mpt2sas: Call init_completion on a per request basis.
  [SCSI] mpt2sas: Target Reset will be issued from Interrupt context.
  [SCSI] mpt2sas: Added SCSIIO, Internal and high priority memory pools to support multiple TM
  [SCSI] mpt2sas: Copyright change to 2009.
  [SCSI] mpt2sas: Added mpi2_history.txt for MPI2 headers.
  [SCSI] mpt2sas: Update driver to MPI2 REV K headers.
  [SCSI] bfa: Brocade BFA FC SCSI driver
  ...

Documentation/scsi/hptiop.txt

@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of

MAINTAINERS

@@ -1231,6 +1231,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROCADE BFA FC SCSI DRIVER
+P:      Jing Huang
+M:      huangj@brocade.com
+L:      linux-scsi@vger.kernel.org
+S:      Supported
+F:      drivers/scsi/bfa/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -4646,6 +4653,14 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P:     Jayamohan Kallickal
+M:     jayamohank@serverengines.com
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
+
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>

drivers/infiniband/ulp/iser/iscsi_iser.c

@@ -426,7 +426,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep,
 	 * because we preallocate so many resources
 	 */
 	cls_session = iscsi_session_setup(&iscsi_iser_transport, shost,
-					  ISCSI_DEF_XMIT_CMDS_MAX,
+					  ISCSI_DEF_XMIT_CMDS_MAX, 0,
 					  sizeof(struct iscsi_iser_task),
 					  initial_cmdsn, 0);
 	if (!cls_session)

drivers/s390/scsi/zfcp_aux.c

@@ -80,28 +80,35 @@ int zfcp_reqlist_isempty(struct zfcp_adapter *adapter)
 
 static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
 {
+	struct ccw_device *ccwdev;
 	struct zfcp_adapter *adapter;
 	struct zfcp_port *port;
 	struct zfcp_unit *unit;
 
+	ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+	if (!ccwdev)
+		return;
+
+	if (ccw_device_set_online(ccwdev))
+		goto out_ccwdev;
+
 	mutex_lock(&zfcp_data.config_mutex);
-	read_lock_irq(&zfcp_data.config_lock);
-	adapter = zfcp_get_adapter_by_busid(busid);
-	if (adapter)
+	adapter = dev_get_drvdata(&ccwdev->dev);
+	if (!adapter)
+		goto out_unlock;
 	zfcp_adapter_get(adapter);
-	read_unlock_irq(&zfcp_data.config_lock);
 
-	if (!adapter)
-		goto out_adapter;
-	port = zfcp_port_enqueue(adapter, wwpn, 0, 0);
-	if (IS_ERR(port))
+	port = zfcp_get_port_by_wwpn(adapter, wwpn);
+	if (!port)
 		goto out_port;
+
+	zfcp_port_get(port);
 	unit = zfcp_unit_enqueue(port, lun);
 	if (IS_ERR(unit))
 		goto out_unit;
 	mutex_unlock(&zfcp_data.config_mutex);
-	ccw_device_set_online(adapter->ccw_device);
 
+	zfcp_erp_unit_reopen(unit, 0, "auidc_1", NULL);
 	zfcp_erp_wait(adapter);
 	flush_work(&unit->scsi_work);
 
@@ -111,8 +118,10 @@ static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
 	zfcp_port_put(port);
 out_port:
 	zfcp_adapter_put(adapter);
-out_adapter:
+out_unlock:
 	mutex_unlock(&zfcp_data.config_mutex);
+out_ccwdev:
+	put_device(&ccwdev->dev);
 	return;
 }
 
@@ -593,10 +602,8 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
 	int retval = 0;
 	unsigned long flags;
 
-	cancel_work_sync(&adapter->scan_work);
 	cancel_work_sync(&adapter->stat_work);
 	zfcp_fc_wka_ports_force_offline(adapter->gs);
-	zfcp_adapter_scsi_unregister(adapter);
 	sysfs_remove_group(&adapter->ccw_device->dev.kobj,
 			   &zfcp_sysfs_adapter_attrs);
 	dev_set_drvdata(&adapter->ccw_device->dev, NULL);

drivers/s390/scsi/zfcp_ccw.c

@@ -102,6 +102,14 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
 	adapter = dev_get_drvdata(&ccw_device->dev);
 	if (!adapter)
 		goto out;
+	mutex_unlock(&zfcp_data.config_mutex);
+
+	cancel_work_sync(&adapter->scan_work);
+
+	mutex_lock(&zfcp_data.config_mutex);
+
+	/* this also removes the scsi devices, so call it first */
+	zfcp_adapter_scsi_unregister(adapter);
 
 	write_lock_irq(&zfcp_data.config_lock);
 	list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
@@ -117,11 +125,8 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
 	write_unlock_irq(&zfcp_data.config_lock);
 
 	list_for_each_entry_safe(port, p, &port_remove_lh, list) {
-		list_for_each_entry_safe(unit, u, &unit_remove_lh, list) {
-			if (unit->device)
-				scsi_remove_device(unit->device);
+		list_for_each_entry_safe(unit, u, &unit_remove_lh, list)
 			zfcp_unit_dequeue(unit);
-		}
 		zfcp_port_dequeue(port);
 	}
 	wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
@@ -192,13 +197,9 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
 
 	mutex_lock(&zfcp_data.config_mutex);
 	adapter = dev_get_drvdata(&ccw_device->dev);
-	if (!adapter)
-		goto out;
-
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
 	zfcp_erp_wait(adapter);
 	mutex_unlock(&zfcp_data.config_mutex);
-out:
 	return 0;
 }
 
@@ -253,13 +254,17 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
 
 	mutex_lock(&zfcp_data.config_mutex);
 	adapter = dev_get_drvdata(&cdev->dev);
+	if (!adapter)
+		goto out;
+
 	zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
 	zfcp_erp_wait(adapter);
 	zfcp_erp_thread_kill(adapter);
+out:
 	mutex_unlock(&zfcp_data.config_mutex);
 }
 
-static struct ccw_driver zfcp_ccw_driver = {
+struct ccw_driver zfcp_ccw_driver = {
 	.owner       = THIS_MODULE,
 	.name        = "zfcp",
 	.ids         = zfcp_ccw_device_id,
@@ -284,20 +289,3 @@ int __init zfcp_ccw_register(void)
 {
 	return ccw_driver_register(&zfcp_ccw_driver);
 }
-
-/**
- * zfcp_get_adapter_by_busid - find zfcp_adapter struct
- * @busid: bus id string of zfcp adapter to find
- */
-struct zfcp_adapter *zfcp_get_adapter_by_busid(char *busid)
-{
-	struct ccw_device *ccw_device;
-	struct zfcp_adapter *adapter = NULL;
-
-	ccw_device = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
-	if (ccw_device) {
-		adapter = dev_get_drvdata(&ccw_device->dev);
-		put_device(&ccw_device->dev);
-	}
-	return adapter;
-}

drivers/s390/scsi/zfcp_cfdc.c

@@ -86,8 +86,23 @@ static int zfcp_cfdc_copy_to_user(void __user  *user_buffer,
 static struct zfcp_adapter *zfcp_cfdc_get_adapter(u32 devno)
 {
 	char busid[9];
+	struct ccw_device *ccwdev;
+	struct zfcp_adapter *adapter = NULL;
+
 	snprintf(busid, sizeof(busid), "0.0.%04x", devno);
-	return zfcp_get_adapter_by_busid(busid);
+	ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+	if (!ccwdev)
+		goto out;
+
+	adapter = dev_get_drvdata(&ccwdev->dev);
+	if (!adapter)
+		goto out_put;
+
+	zfcp_adapter_get(adapter);
+out_put:
+	put_device(&ccwdev->dev);
+out:
+	return adapter;
 }
 
 static int zfcp_cfdc_set_fsf(struct zfcp_fsf_cfdc *fsf_cfdc, int command)

drivers/s390/scsi/zfcp_ext.h

@@ -28,7 +28,7 @@ extern int zfcp_sg_setup_table(struct scatterlist *, int);
 /* zfcp_ccw.c */
 extern int zfcp_ccw_register(void);
 extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
-extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
+extern struct ccw_driver zfcp_ccw_driver;
 
 /* zfcp_cfdc.c */
 extern struct miscdevice zfcp_cfdc_misc;

drivers/s390/scsi/zfcp_fsf.c

@@ -1058,11 +1058,25 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
 	bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->queue_req,
 					SBAL_FLAGS0_TYPE_WRITE_READ,
 					sg_resp, max_sbals);
+	req->qtcb->bottom.support.resp_buf_length = bytes;
 	if (bytes <= 0)
 		return -EIO;
 
+	return 0;
+}
+
+static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req,
+				 struct scatterlist *sg_req,
+				 struct scatterlist *sg_resp,
+				 int max_sbals)
+{
+	int ret;
+
+	ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
+	if (ret)
+		return ret;
+
 	/* common settings for ct/gs and els requests */
-	req->qtcb->bottom.support.resp_buf_length = bytes;
 	req->qtcb->bottom.support.service_class = FSF_CLASS_3;
 	req->qtcb->bottom.support.timeout = 2 * R_A_TOV;
 	zfcp_fsf_start_timer(req, 2 * R_A_TOV + 10);
@@ -1094,7 +1108,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool)
 	}
 
 	req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
-	ret = zfcp_fsf_setup_ct_els_sbals(req, ct->req, ct->resp,
+	ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp,
 				    FSF_MAX_SBALS_PER_REQ);
 	if (ret)
 		goto failed_send;
@@ -1192,7 +1206,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els)
 	}
 
 	req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
-	ret = zfcp_fsf_setup_ct_els_sbals(req, els->req, els->resp, 2);
+	ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2);
 
 	if (ret)
 		goto failed_send;

drivers/scsi/Kconfig

@@ -366,6 +366,7 @@ config ISCSI_TCP
 
 source "drivers/scsi/cxgb3i/Kconfig"
 source "drivers/scsi/bnx2i/Kconfig"
+source "drivers/scsi/be2iscsi/Kconfig"
 
 config SGIWD93_SCSI
 	tristate "SGI WD93C93 SCSI Driver"
@@ -1827,6 +1828,16 @@ config SCSI_SRP
 	  To compile this driver as a module, choose M here: the
 	  module will be called libsrp.
 
+config SCSI_BFA_FC
+	tristate "Brocade BFA Fibre Channel Support"
+	depends on PCI && SCSI
+	select SCSI_FC_ATTRS
+	help
+	  This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called bfa.
+
 endif # SCSI_LOWLEVEL
 
 source "drivers/scsi/pcmcia/Kconfig"

drivers/scsi/Makefile

@@ -86,6 +86,7 @@ obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o
 obj-$(CONFIG_SCSI_QLA_FC)	+= qla2xxx/
 obj-$(CONFIG_SCSI_QLA_ISCSI)	+= qla4xxx/
 obj-$(CONFIG_SCSI_LPFC)		+= lpfc/
+obj-$(CONFIG_SCSI_BFA_FC)	+= bfa/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_T128)		+= t128.o
 obj-$(CONFIG_SCSI_DMX3191D)	+= dmx3191d.o
@@ -130,6 +131,7 @@ obj-$(CONFIG_SCSI_MVSAS)	+= mvsas/
 obj-$(CONFIG_PS3_ROM)		+= ps3rom.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgb3i/
 obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
+obj-$(CONFIG_BE2ISCSI)		+= libiscsi.o be2iscsi/
 obj-$(CONFIG_SCSI_PMCRAID)	+= pmcraid.o
 
 obj-$(CONFIG_ARM)		+= arm/

drivers/scsi/be2iscsi/Kconfig

+config BE2ISCSI
+	tristate "ServerEngines' 10Gbps iSCSI - BladeEngine 2"
+	depends on PCI && SCSI
+	select SCSI_ISCSI_ATTRS
+
+	help
+	This driver implements the iSCSI functionality for ServerEngines'
+	10Gbps Storage adapter - BladeEngine 2.

drivers/scsi/be2iscsi/Makefile

+#
+# Makefile to build the iSCSI driver for ServerEngine's BladeEngine.
+#
+#
+
+obj-$(CONFIG_BE2ISCSI) += be2iscsi.o
+
+be2iscsi-y := be_iscsi.o be_main.o be_mgmt.o be_cmds.o

drivers/scsi/be2iscsi/be.h

+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BEISCSI_H
+#define BEISCSI_H
+
+#include <linux/pci.h>
+#include <linux/if_vlan.h>
+
+#define FW_VER_LEN 32
+
+struct be_dma_mem {
+	void *va;
+	dma_addr_t dma;
+	u32 size;
+};
+
+struct be_queue_info {
+	struct be_dma_mem dma_mem;
+	u16 len;
+	u16 entry_size;		/* Size of an element in the queue */
+	u16 id;
+	u16 tail, head;
+	bool created;
+	atomic_t used;		/* Number of valid elements in the queue */
+};
+
+static inline u32 MODULO(u16 val, u16 limit)
+{
+	WARN_ON(limit & (limit - 1));
+	return val & (limit - 1);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+	*index = MODULO((*index + 1), limit);
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+	return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+	index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+	index_inc(&q->tail, q->len);
+}
+
+/*ISCSI */
+
+struct be_eq_obj {
+	struct be_queue_info q;
+	char desc[32];
+
+	/* Adaptive interrupt coalescing (AIC) info */
+	bool enable_aic;
+	u16 min_eqd;		/* in usecs */
+	u16 max_eqd;		/* in usecs */
+	u16 cur_eqd;		/* in usecs */
+};
+
+struct be_mcc_obj {
+	struct be_queue_info *q;
+	struct be_queue_info *cq;
+};
+
+struct be_ctrl_info {
+	u8 __iomem *csr;
+	u8 __iomem *db;		/* Door Bell */
+	u8 __iomem *pcicfg;	/* PCI config space */
+	struct pci_dev *pdev;
+
+	/* Mbox used for cmd request/response */
+	spinlock_t mbox_lock;	/* For serializing mbox cmds to BE card */
+	struct be_dma_mem mbox_mem;
+	/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+	 * is stored for freeing purpose */
+	struct be_dma_mem mbox_mem_alloced;
+
+	/* MCC Rings */
+	struct be_mcc_obj mcc_obj;
+	spinlock_t mcc_lock;	/* For serializing mcc cmds to BE card */
+	spinlock_t mcc_cq_lock;
+
+	/* MCC Async callback */
+	void (*async_cb) (void *adapter, bool link_up);
+	void *adapter_ctxt;
+};
+
+#include "be_cmds.h"
+
+#define PAGE_SHIFT_4K 12
+#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
+
+/* Returns number of pages spanned by the data starting at the given addr */
+#define PAGES_4K_SPANNED(_address, size) 				\
+		((u32)((((size_t)(_address) & (PAGE_SIZE_4K - 1)) + 	\
+			(size) + (PAGE_SIZE_4K - 1)) >> PAGE_SHIFT_4K))
+
+/* Byte offset into the page corresponding to given address */
+#define OFFSET_IN_PAGE(addr)						\
+		((size_t)(addr) & (PAGE_SIZE_4K-1))
+
+/* Returns bit offset within a DWORD of a bitfield */
+#define AMAP_BIT_OFFSET(_struct, field)  				\
+		(((size_t)&(((_struct *)0)->field))%32)
+
+/* Returns the bit mask of the field that is NOT shifted into location. */
+static inline u32 amap_mask(u32 bitsize)
+{
+	return (bitsize == 32 ? 0xFFFFFFFF : (1 << bitsize) - 1);
+}
+
+static inline void amap_set(void *ptr, u32 dw_offset, u32 mask,
+					u32 offset, u32 value)
+{
+	u32 *dw = (u32 *) ptr + dw_offset;
+	*dw &= ~(mask << offset);
+	*dw |= (mask & value) << offset;
+}
+
+#define AMAP_SET_BITS(_struct, field, ptr, val)				\
+		amap_set(ptr,						\
+			offsetof(_struct, field)/32,			\
+			amap_mask(sizeof(((_struct *)0)->field)),	\
+			AMAP_BIT_OFFSET(_struct, field),		\
+			val)
+
+static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
+{
+	u32 *dw = ptr;
+	return mask & (*(dw + dw_offset) >> offset);
+}
+
+#define AMAP_GET_BITS(_struct, field, ptr)				\
+		amap_get(ptr,						\
+			offsetof(_struct, field)/32,			\
+			amap_mask(sizeof(((_struct *)0)->field)),	\
+			AMAP_BIT_OFFSET(_struct, field))
+
+#define be_dws_cpu_to_le(wrb, len) swap_dws(wrb, len)
+#define be_dws_le_to_cpu(wrb, len) swap_dws(wrb, len)
+static inline void swap_dws(void *wrb, int len)
+{
+#ifdef __BIG_ENDIAN
+	u32 *dw = wrb;
+	WARN_ON(len % 4);
+	do {
+		*dw = cpu_to_le32(*dw);
+		dw++;
+		len -= 4;
+	} while (len);
+#endif /* __BIG_ENDIAN */
+}
+
+extern void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+			      u16 num_popped);
+
+#endif /* BEISCSI_H */

drivers/scsi/be2iscsi/be_iscsi.h

+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BE_ISCSI_
+#define _BE_ISCSI_
+
+#include "be_main.h"
+#include "be_mgmt.h"
+
+#define BE2_IPV4  0x1
+#define BE2_IPV6  0x10
+
+void beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
+				struct beiscsi_offload_params *params);
+
+void beiscsi_offload_iscsi(struct beiscsi_hba *phba, struct iscsi_conn *conn,
+			   struct beiscsi_conn *beiscsi_conn,
+			   unsigned int fw_handle);
+
+struct iscsi_cls_session *beiscsi_session_create(struct iscsi_endpoint *ep,
+						 uint16_t cmds_max,
+						 uint16_t qdepth,
+						 uint32_t initial_cmdsn);
+
+void beiscsi_session_destroy(struct iscsi_cls_session *cls_session);
+
+struct iscsi_cls_conn *beiscsi_conn_create(struct iscsi_cls_session
+					   *cls_session, uint32_t cid);
+
+int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
+		      struct iscsi_cls_conn *cls_conn,
+		      uint64_t transport_fd, int is_leading);
+
+int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+			   enum iscsi_param param, char *buf);
+
+int beiscsi_get_host_param(struct Scsi_Host *shost,
+			   enum iscsi_host_param param, char *buf);
+
+int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
+		      enum iscsi_param param, char *buf, int buflen);
+
+int beiscsi_conn_start(struct iscsi_cls_conn *cls_conn);
+
+void beiscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag);
+
+struct iscsi_endpoint *beiscsi_ep_connect(struct Scsi_Host *shost,
+					  struct sockaddr *dst_addr,
+					  int non_blocking);
+
+int beiscsi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms);
+
+void beiscsi_ep_disconnect(struct iscsi_endpoint *ep);
+
+void beiscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+			    struct iscsi_stats *stats);
+
+#endif

drivers/scsi/be2iscsi/be_mgmt.h

+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.  The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BEISCSI_MGMT_
+#define _BEISCSI_MGMT_
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include "be_iscsi.h"
+#include "be_main.h"
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_sge {
+	u8 pa_lo[32];		/* dword 0 */
+	u8 pa_hi[32];		/* dword 1 */
+	u8 length[32];		/* DWORD 2 */
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_wrb_payload {
+	union {
+		struct amap_mcc_sge sgl[19];
+		u8 embedded[59 * 32];	/* DWORDS 57 to 115 */
+	} u;
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_wrb {
+	u8 embedded;		/* DWORD 0 */
+	u8 rsvd0[2];		/* DWORD 0 */
+	u8 sge_count[5];	/* DWORD 0 */
+	u8 rsvd1[16];		/* DWORD 0 */
+	u8 special[8];		/* DWORD 0 */
+	u8 payload_length[32];
+	u8 tag[64];		/* DWORD 2 */
+	u8 rsvd2[32];		/* DWORD 4 */
+	struct amap_mcc_wrb_payload payload;
+};
+
+struct mcc_sge {
+	u32 pa_lo;		/* dword 0 */
+	u32 pa_hi;		/* dword 1 */
+	u32 length;		/* DWORD 2 */
+} __packed;
+
+struct mcc_wrb_payload {
+	union {
+		struct mcc_sge sgl[19];
+		u32 embedded[59];	/* DWORDS 57 to 115 */
+	} u;
+} __packed;
+
+#define MCC_WRB_EMBEDDED_MASK                0x00000001
+
+struct mcc_wrb {
+	u32 dw[0];		/* DWORD 0 */
+	u32 payload_length;
+	u32 tag[2];		/* DWORD 2 */
+	u32 rsvd2[1];		/* DWORD 4 */
+	struct mcc_wrb_payload payload;
+};
+
+unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute);
+int mgmt_open_connection(struct beiscsi_hba *phba, struct sockaddr *dst_addr,
+			 struct beiscsi_endpoint *beiscsi_ep);
+
+unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
+				     unsigned short cid,
+				     unsigned int upload_flag);
+unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
+				   unsigned int icd, unsigned int cid);
+
+struct iscsi_invalidate_connection_params_in {
+	struct be_cmd_req_hdr hdr;
+	unsigned int session_handle;
+	unsigned short cid;
+	unsigned short unused;
+	unsigned short cleanup_type;
+	unsigned short save_cfg;
+} __packed;
+
+struct iscsi_invalidate_connection_params_out {
+	unsigned int session_handle;
+	unsigned short cid;
+	unsigned short unused;
+} __packed;
+
+union iscsi_invalidate_connection_params {
+	struct iscsi_invalidate_connection_params_in request;
+	struct iscsi_invalidate_connection_params_out response;
+} __packed;
+
+struct invalidate_command_table {
+	unsigned short icd;
+	unsigned short cid;
+} __packed;
+
+struct invalidate_commands_params_in {
+	struct be_cmd_req_hdr hdr;
+	unsigned int ref_handle;
+	unsigned int icd_count;
+	struct invalidate_command_table table[128];
+	unsigned short cleanup_type;
+	unsigned short unused;
+} __packed;
+
+struct invalidate_commands_params_out {
+	unsigned int ref_handle;
+	unsigned int icd_count;
+	unsigned int icd_status[128];
+} __packed;
+
+union invalidate_commands_params {
+	struct invalidate_commands_params_in request;
+	struct invalidate_commands_params_out response;
+} __packed;
+
+struct mgmt_hba_attributes {
+	u8 flashrom_version_string[32];
+	u8 manufacturer_name[32];
+	u32 supported_modes;
+	u8 seeprom_version_lo;
+	u8 seeprom_version_hi;
+	u8 rsvd0[2];
+	u32 fw_cmd_data_struct_version;
+	u32 ep_fw_data_struct_version;
+	u32 future_reserved[12];
+	u32 default_extended_timeout;
+	u8 controller_model_number[32];
+	u8 controller_description[64];
+	u8 controller_serial_number[32];
+	u8 ip_version_string[32];
+	u8 firmware_version_string[32];
+	u8 bios_version_string[32];
+	u8 redboot_version_string[32];
+	u8 driver_version_string[32];
+	u8 fw_on_flash_version_string[32];
+	u32 functionalities_supported;
+	u16 max_cdblength;
+	u8 asic_revision;
+	u8 generational_guid[16];
+	u8 hba_port_count;
+	u16 default_link_down_timeout;
+	u8 iscsi_ver_min_max;
+	u8 multifunction_device;
+	u8 cache_valid;
+	u8 hba_status;
+	u8 max_domains_supported;
+	u8 phy_port;
+	u32 firmware_post_status;
+	u32 hba_mtu[8];
+	u32 future_u32[4];
+} __packed;
+
+struct mgmt_controller_attributes {
+	struct mgmt_hba_attributes hba_attribs;
+	u16 pci_vendor_id;
+	u16 pci_device_id;
+	u16 pci_sub_vendor_id;
+	u16 pci_sub_system_id;
+	u8 pci_bus_number;
+	u8 pci_device_number;
+	u8 pci_function_number;
+	u8 interface_type;
+	u64 unique_identifier;
+	u8 netfilters;
+	u8 rsvd0[3];
+	u8 future_u32[4];
+} __packed;
+
+struct be_mgmt_controller_attributes {
+	struct be_cmd_req_hdr hdr;
+	struct mgmt_controller_attributes params;
+} __packed;
+
+struct be_mgmt_controller_attributes_resp {
+	struct be_cmd_resp_hdr hdr;
+	struct mgmt_controller_attributes params;
+} __packed;
+
+/* configuration management */
+
+#define GET_MGMT_CONTROLLER_WS(phba)    (phba->pmgmt_ws)
+
+/* MGMT CMD flags */
+
+#define MGMT_CMDH_FREE                (1<<0)
+
+/*  --- MGMT_ERROR_CODES --- */
+/*  Error Codes returned in the status field of the CMD response header */
+#define MGMT_STATUS_SUCCESS 0	/* The CMD completed without errors */
+#define MGMT_STATUS_FAILED 1	/* Error status in the Status field of */
+				/* the CMD_RESPONSE_HEADER  */
+
+#define ISCSI_GET_PDU_TEMPLATE_ADDRESS(pc, pa) {\
+    pa->lo = phba->init_mem[ISCSI_MEM_GLOBAL_HEADER].mem_array[0].\
+					bus_address.u.a32.address_lo;  \
+    pa->hi = phba->init_mem[ISCSI_MEM_GLOBAL_HEADER].mem_array[0].\
+					bus_address.u.a32.address_hi;  \
+}
+
+struct beiscsi_endpoint {
+	struct beiscsi_hba *phba;
+	struct beiscsi_sess *sess;
+	struct beiscsi_conn *conn;
+	unsigned short ip_type;
+	char dst6_addr[ISCSI_ADDRESS_BUF_LEN];
+	unsigned long dst_addr;
+	unsigned short ep_cid;
+	unsigned int fw_handle;
+	u16 dst_tcpport;
+	u16 cid_vld;
+};
+
+unsigned char mgmt_get_fw_config(struct be_ctrl_info *ctrl,
+				 struct beiscsi_hba *phba);
+
+unsigned char mgmt_invalidate_connection(struct beiscsi_hba *phba,
+					 struct beiscsi_endpoint *beiscsi_ep,
+					 unsigned short cid,
+					 unsigned short issue_reset,
+					 unsigned short savecfg_flag);
+#endif

drivers/scsi/bfa/Makefile

+obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
+
+bfa-y := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o
+
+bfa-y += bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_lps.o
+bfa-y += bfa_hw_cb.o bfa_hw_ct.o bfa_intr.o bfa_timer.o bfa_rport.o 
+bfa-y += bfa_fcport.o bfa_port.o bfa_uf.o bfa_sgpg.o bfa_module.o bfa_ioim.o
+bfa-y += bfa_itnim.o bfa_fcpim.o bfa_tskim.o bfa_log.o bfa_log_module.o
+bfa-y += bfa_csdebug.o bfa_sm.o plog.o
+
+bfa-y += fcbuild.o fabric.o fcpim.o vfapi.o fcptm.o bfa_fcs.o bfa_fcs_port.o 
+bfa-y += bfa_fcs_uf.o bfa_fcs_lport.o fab.o fdmi.o ms.o ns.o scn.o loop.o
+bfa-y += lport_api.o n2n.o rport.o rport_api.o rport_ftrs.o vport.o
+
+ccflags-y := -I$(obj) -I$(obj)/include -I$(obj)/include/cna

drivers/scsi/bfa/bfa_callback_priv.h

+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_CALLBACK_PRIV_H__
+#define __BFA_CALLBACK_PRIV_H__
+
+#include <cs/bfa_q.h>
+
+typedef void    (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+
+/**
+ * Generic BFA callback element.
+ */
+struct bfa_cb_qe_s {
+	struct list_head         qe;
+	bfa_cb_cbfn_t  cbfn;
+	bfa_boolean_t   once;
+	u32		rsvd;
+	void           *cbarg;
+};
+
+#define bfa_cb_queue(__bfa, __hcb_qe, __cbfn, __cbarg) do {		\
+	(__hcb_qe)->cbfn  = (__cbfn);      \
+	(__hcb_qe)->cbarg = (__cbarg);      \
+	list_add_tail(&(__hcb_qe)->qe, &(__bfa)->comp_q);      \
+} while (0)
+
+#define bfa_cb_dequeue(__hcb_qe)	list_del(&(__hcb_qe)->qe)
+
+#define bfa_cb_queue_once(__bfa, __hcb_qe, __cbfn, __cbarg) do {	\
+	(__hcb_qe)->cbfn  = (__cbfn);      \
+	(__hcb_qe)->cbarg = (__cbarg);      \
+	if (!(__hcb_qe)->once) {      \
+		list_add_tail((__hcb_qe), &(__bfa)->comp_q);      \
+		(__hcb_qe)->once = BFA_TRUE;				\
+	}								\
+} while (0)
+
+#define bfa_cb_queue_done(__hcb_qe) do {				\
+	(__hcb_qe)->once = BFA_FALSE;					\
+} while (0)
+
+#endif /* __BFA_CALLBACK_PRIV_H__ */

drivers/scsi/bfa/bfa_cb_ioim_macros.h

+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_cb_ioim_macros.h BFA IOIM driver interface macros.
+ */
+
+#ifndef __BFA_HCB_IOIM_MACROS_H__
+#define __BFA_HCB_IOIM_MACROS_H__
+
+#include <bfa_os_inc.h>
+/*
+ * #include <linux/dma-mapping.h>
+ *
+ * #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include
+ * <scsi/scsi_device.h> #include <scsi/scsi_host.h>
+ */
+#include "bfad_im_compat.h"
+
+/*
+ * task attribute values in FCP-2 FCP_CMND IU
+ */
+#define SIMPLE_Q    0
+#define HEAD_OF_Q   1
+#define ORDERED_Q   2
+#define ACA_Q       4
+#define UNTAGGED    5
+
+static inline lun_t
+bfad_int_to_lun(u32 luno)
+{
+	union {
+		u16        scsi_lun[4];
+		lun_t           bfa_lun;
+	} lun;
+
+	lun.bfa_lun     = 0;
+	lun.scsi_lun[0] = bfa_os_htons(luno);
+
+	return (lun.bfa_lun);
+}
+
+/**
+ * Get LUN for the I/O request
+ */
+#define bfa_cb_ioim_get_lun(__dio)	\
+	bfad_int_to_lun(((struct scsi_cmnd *)__dio)->device->lun)
+
+/**
+ * Get CDB for the I/O request
+ */
+static inline u8 *
+bfa_cb_ioim_get_cdb(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+	return ((u8 *) cmnd->cmnd);
+}
+
+/**
+ * Get I/O direction (read/write) for the I/O request
+ */
+static inline enum fcp_iodir
+bfa_cb_ioim_get_iodir(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	enum dma_data_direction dmadir;
+
+	dmadir = cmnd->sc_data_direction;
+	if (dmadir == DMA_TO_DEVICE)
+		return FCP_IODIR_WRITE;
+	else if (dmadir == DMA_FROM_DEVICE)
+		return FCP_IODIR_READ;
+	else
+		return FCP_IODIR_NONE;
+}
+
+/**
+ * Get IO size in bytes for the I/O request
+ */
+static inline u32
+bfa_cb_ioim_get_size(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+	return (scsi_bufflen(cmnd));
+}
+
+/**
+ * Get timeout for the I/O request
+ */
+static inline u8
+bfa_cb_ioim_get_timeout(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	/*
+	 * TBD: need a timeout for scsi passthru
+	 */
+	if (cmnd->device->host == NULL)
+		return 4;
+
+	return 0;
+}
+
+/**
+ * Get SG element for the I/O request given the SG element index
+ */
+static inline union bfi_addr_u
+bfa_cb_ioim_get_sgaddr(struct bfad_ioim_s *dio, int sgeid)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct scatterlist *sge;
+	u64        addr;
+
+	sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
+	addr = (u64) sg_dma_address(sge);
+
+	return (*(union bfi_addr_u *) &addr);
+}
+
+static inline u32
+bfa_cb_ioim_get_sglen(struct bfad_ioim_s *dio, int sgeid)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	struct scatterlist *sge;
+	u32        len;
+
+	sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
+	len = sg_dma_len(sge);
+
+	return len;
+}
+
+/**
+ * Get Command Reference Number for the I/O request. 0 if none.
+ */
+static inline u8
+bfa_cb_ioim_get_crn(struct bfad_ioim_s *dio)
+{
+	return 0;
+}
+
+/**
+ * Get SAM-3 priority for the I/O request. 0 is default.
+ */
+static inline u8
+bfa_cb_ioim_get_priority(struct bfad_ioim_s *dio)
+{
+	return 0;
+}
+
+/**
+ * Get task attributes for the I/O request. Default is FCP_TASK_ATTR_SIMPLE(0).
+ */
+static inline u8
+bfa_cb_ioim_get_taskattr(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+	u8         task_attr = UNTAGGED;
+
+	if (cmnd->device->tagged_supported) {
+		switch (cmnd->tag) {
+		case HEAD_OF_QUEUE_TAG:
+			task_attr = HEAD_OF_Q;
+			break;
+		case ORDERED_QUEUE_TAG:
+			task_attr = ORDERED_Q;
+			break;
+		default:
+			task_attr = SIMPLE_Q;
+			break;
+		}
+	}
+
+	return task_attr;
+}
+
+/**
+ * Get CDB length in bytes for the I/O request. Default is FCP_CMND_CDB_LEN(16).
+ */
+static inline u8
+bfa_cb_ioim_get_cdblen(struct bfad_ioim_s *dio)
+{
+	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+	return (cmnd->cmd_len);
+}
+
+
+
+#endif /* __BFA_HCB_IOIM_MACROS_H__ */

drivers/scsi/bfa/bfa_csdebug.c

+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_debug.h>
+#include <bfa_os_inc.h>
+#include <cs/bfa_q.h>
+#include <log/bfa_log_hal.h>
+
+/**
+ *  cs_debug_api
+ */
+
+
+void
+bfa_panic(int line, char *file, char *panicstr)
+{
+	bfa_log(NULL, BFA_LOG_HAL_ASSERT, file, line, panicstr);
+	bfa_os_panic();
+}
+
+void
+bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event)
+{
+	bfa_log(logm, BFA_LOG_HAL_SM_ASSERT, file, line, event);
+	bfa_os_panic();
+}
+
+int
+bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe)
+{
+	struct list_head        *tqe;
+
+	tqe = bfa_q_next(q);
+	while (tqe != q) {
+		if (tqe == qe)
+			return (1);
+		tqe = bfa_q_next(tqe);
+		if (tqe == NULL)
+			break;
+	}
+	return (0);
+}
+
+

drivers/scsi/bfa/bfa_fcs_port.c

+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  bfa_fcs_pport.c BFA FCS PPORT ( physical port)
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_fabric.h>
+#include "fcs_trcmod.h"
+#include "fcs.h"
+#include "fcs_fabric.h"
+#include "fcs_port.h"
+
+BFA_TRC_FILE(FCS, PPORT);
+
+static void
+bfa_fcs_pport_event_handler(void *cbarg, bfa_pport_event_t event)
+{
+	struct bfa_fcs_s      *fcs = cbarg;
+
+	bfa_trc(fcs, event);
+
+	switch (event) {
+	case BFA_PPORT_LINKUP:
+		bfa_fcs_fabric_link_up(&fcs->fabric);
+		break;
+
+	case BFA_PPORT_LINKDOWN:
+		bfa_fcs_fabric_link_down(&fcs->fabric);
+		break;
+
+	case BFA_PPORT_TRUNK_LINKDOWN:
+		bfa_assert(0);
+		break;
+
+	default:
+		bfa_assert(0);
+	}
+}
+
+void
+bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs)
+{
+	bfa_pport_event_register(fcs->bfa, bfa_fcs_pport_event_handler,
+				     fcs);
+}
+
+void
+bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs)
+{
+	bfa_fcs_modexit_comp(fcs);
+}

drivers/scsi/bfa/bfa_fwimg_priv.h

+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FWIMG_PRIV_H__
+#define __BFA_FWIMG_PRIV_H__
+
+#define	BFI_FLASH_CHUNK_SZ		256	/*  Flash chunk size */
+#define	BFI_FLASH_CHUNK_SZ_WORDS	(BFI_FLASH_CHUNK_SZ/sizeof(u32))
+
+extern u32 *bfi_image_ct_get_chunk(u32 off);
+extern u32 bfi_image_ct_size;
+extern u32 *bfi_image_cb_get_chunk(u32 off);
+extern u32 bfi_image_cb_size;
+extern u32 *bfi_image_cb;
+extern u32 *bfi_image_ct;
+
+#endif /* __BFA_FWIMG_PRIV_H__ */

drivers/scsi/bfa/fcs.h

+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ *  fcs.h FCS module functions
+ */
+
+
+#ifndef __FCS_H__
+#define __FCS_H__
+
+#define __fcs_min_cfg(__fcs)       (__fcs)->min_cfg
+
+void bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_H__ */