Commit 695ff985 authored by Paul Cercueil's avatar Paul Cercueil Committed by Linus Walleij

fbdev: jz4740-fb: Let the pinctrl driver configure the pins

Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
the pins being properly configured before the driver probes.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Acked-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 47096d70
......@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/clk.h>
#include <linux/delay.h>
......@@ -27,7 +28,6 @@
#include <linux/dma-mapping.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <asm/mach-jz4740/gpio.h>
#define JZ_REG_LCD_CFG 0x00
#define JZ_REG_LCD_VSYNC 0x04
......@@ -146,93 +146,6 @@ static const struct fb_fix_screeninfo jzfb_fix = {
.accel = FB_ACCEL_NONE,
};
static const struct jz_gpio_bulk_request jz_lcd_ctrl_pins[] = {
JZ_GPIO_BULK_PIN(LCD_PCLK),
JZ_GPIO_BULK_PIN(LCD_HSYNC),
JZ_GPIO_BULK_PIN(LCD_VSYNC),
JZ_GPIO_BULK_PIN(LCD_DE),
JZ_GPIO_BULK_PIN(LCD_PS),
JZ_GPIO_BULK_PIN(LCD_REV),
JZ_GPIO_BULK_PIN(LCD_CLS),
JZ_GPIO_BULK_PIN(LCD_SPL),
};
static const struct jz_gpio_bulk_request jz_lcd_data_pins[] = {
JZ_GPIO_BULK_PIN(LCD_DATA0),
JZ_GPIO_BULK_PIN(LCD_DATA1),
JZ_GPIO_BULK_PIN(LCD_DATA2),
JZ_GPIO_BULK_PIN(LCD_DATA3),
JZ_GPIO_BULK_PIN(LCD_DATA4),
JZ_GPIO_BULK_PIN(LCD_DATA5),
JZ_GPIO_BULK_PIN(LCD_DATA6),
JZ_GPIO_BULK_PIN(LCD_DATA7),
JZ_GPIO_BULK_PIN(LCD_DATA8),
JZ_GPIO_BULK_PIN(LCD_DATA9),
JZ_GPIO_BULK_PIN(LCD_DATA10),
JZ_GPIO_BULK_PIN(LCD_DATA11),
JZ_GPIO_BULK_PIN(LCD_DATA12),
JZ_GPIO_BULK_PIN(LCD_DATA13),
JZ_GPIO_BULK_PIN(LCD_DATA14),
JZ_GPIO_BULK_PIN(LCD_DATA15),
JZ_GPIO_BULK_PIN(LCD_DATA16),
JZ_GPIO_BULK_PIN(LCD_DATA17),
};
static unsigned int jzfb_num_ctrl_pins(struct jzfb *jzfb)
{
unsigned int num;
switch (jzfb->pdata->lcd_type) {
case JZ_LCD_TYPE_GENERIC_16_BIT:
num = 4;
break;
case JZ_LCD_TYPE_GENERIC_18_BIT:
num = 4;
break;
case JZ_LCD_TYPE_8BIT_SERIAL:
num = 3;
break;
case JZ_LCD_TYPE_SPECIAL_TFT_1:
case JZ_LCD_TYPE_SPECIAL_TFT_2:
case JZ_LCD_TYPE_SPECIAL_TFT_3:
num = 8;
break;
default:
num = 0;
break;
}
return num;
}
static unsigned int jzfb_num_data_pins(struct jzfb *jzfb)
{
unsigned int num;
switch (jzfb->pdata->lcd_type) {
case JZ_LCD_TYPE_GENERIC_16_BIT:
num = 16;
break;
case JZ_LCD_TYPE_GENERIC_18_BIT:
num = 18;
break;
case JZ_LCD_TYPE_8BIT_SERIAL:
num = 8;
break;
case JZ_LCD_TYPE_SPECIAL_TFT_1:
case JZ_LCD_TYPE_SPECIAL_TFT_2:
case JZ_LCD_TYPE_SPECIAL_TFT_3:
if (jzfb->pdata->bpp == 18)
num = 18;
else
num = 16;
break;
default:
num = 0;
break;
}
return num;
}
/* Based on CNVT_TOHW macro from skeletonfb.c */
static inline uint32_t jzfb_convert_color_to_hw(unsigned val,
struct fb_bitfield *bf)
......@@ -487,8 +400,7 @@ static void jzfb_enable(struct jzfb *jzfb)
clk_prepare_enable(jzfb->ldclk);
jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
pinctrl_pm_select_default_state(&jzfb->pdev->dev);
writel(0, jzfb->base + JZ_REG_LCD_STATE);
......@@ -511,8 +423,7 @@ static void jzfb_disable(struct jzfb *jzfb)
ctrl = readl(jzfb->base + JZ_REG_LCD_STATE);
} while (!(ctrl & JZ_LCD_STATE_DISABLED));
jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
pinctrl_pm_select_sleep_state(&jzfb->pdev->dev);
clk_disable_unprepare(jzfb->ldclk);
}
......@@ -701,9 +612,6 @@ static int jzfb_probe(struct platform_device *pdev)
fb->mode = NULL;
jzfb_set_par(fb);
jz_gpio_bulk_request(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_request(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
ret = register_framebuffer(fb);
if (ret) {
dev_err(&pdev->dev, "Failed to register framebuffer: %d\n", ret);
......@@ -715,9 +623,6 @@ static int jzfb_probe(struct platform_device *pdev)
return 0;
err_free_devmem:
jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
fb_dealloc_cmap(&fb->cmap);
jzfb_free_devmem(jzfb);
err_framebuffer_release:
......@@ -731,9 +636,6 @@ static int jzfb_remove(struct platform_device *pdev)
jzfb_blank(FB_BLANK_POWERDOWN, jzfb->fb);
jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
fb_dealloc_cmap(&jzfb->fb->cmap);
jzfb_free_devmem(jzfb);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment