RDMA: Adding ethertype ETH_P_IBOE

Update the if_ether.h with the  ethertype for Infiniband over
Ethernet packets. Also, removing the occurances of 0x8915
from infiniband vendor drivers.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

drivers/infiniband/hw/mlx4/qp.c

@@ -76,10 +76,6 @@ enum {
 	MLX4_IB_LSO_HEADER_SPARE	= 128,
 };
 
-enum {
-	MLX4_IB_IBOE_ETHERTYPE		= 0x8915
-};
-
 struct mlx4_ib_sqp {
 	struct mlx4_ib_qp	qp;
 	int			pkey_index;
@@ -2588,7 +2584,7 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_ud_wr *wr,
 		u16 ether_type;
 		u16 pcp = (be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 29) << 13;
 
-		ether_type = (!is_udp) ? MLX4_IB_IBOE_ETHERTYPE :
+		ether_type = (!is_udp) ? ETH_P_IBOE:
 			(ip_version == 4 ? ETH_P_IP : ETH_P_IPV6);
 
 		mlx->sched_prio = cpu_to_be16(pcp);

drivers/infiniband/hw/ocrdma/ocrdma_ah.c

@@ -59,7 +59,7 @@ static u16 ocrdma_hdr_type_to_proto_num(int devid, u8 hdr_type)
 {
 	switch (hdr_type) {
 	case OCRDMA_L3_TYPE_IB_GRH:
-		return (u16)0x8915;
+		return (u16)ETH_P_IBOE;
 	case OCRDMA_L3_TYPE_IPV4:
 		return (u16)0x0800;
 	case OCRDMA_L3_TYPE_IPV6:
@@ -94,7 +94,7 @@ static inline int set_av_attr(struct ocrdma_dev *dev, struct ocrdma_ah *ah,
 	proto_num = ocrdma_hdr_type_to_proto_num(dev->id, ah->hdr_type);
 	if (!proto_num)
 		return -EINVAL;
-	nxthdr = (proto_num == 0x8915) ? 0x1b : 0x11;
+	nxthdr = (proto_num == ETH_P_IBOE) ? 0x1b : 0x11;
 	/* VLAN */
 	if (!vlan_tag || (vlan_tag > 0xFFF))
 		vlan_tag = dev->pvid;

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

@@ -44,6 +44,7 @@
 #include <linux/interrupt.h>
 #include <linux/log2.h>
 #include <linux/dma-mapping.h>
+#include <linux/if_ether.h>
 
 #include <rdma/ib_verbs.h>
 #include <rdma/ib_user_verbs.h>
@@ -2984,7 +2985,7 @@ static int ocrdma_parse_dcbxcfg_rsp(struct ocrdma_dev *dev, int ptype,
 				OCRDMA_APP_PARAM_APP_PROTO_MASK;
 
 		if (
-			valid && proto == OCRDMA_APP_PROTO_ROCE &&
+			valid && proto == ETH_P_IBOE &&
 			proto_sel == OCRDMA_PROTO_SELECT_L2) {
 			for (slindx = 0; slindx <
 				OCRDMA_MAX_SERVICE_LEVEL_INDEX; slindx++) {

drivers/infiniband/hw/ocrdma/ocrdma_sli.h

@@ -1901,7 +1901,6 @@ struct ocrdma_eth_vlan {
 	u8 smac[6];
 	__be16 eth_type;
 	__be16 vlan_tag;
-#define OCRDMA_ROCE_ETH_TYPE 0x8915
 	__be16 roce_eth_type;
 } __packed;
 
@@ -2179,10 +2178,6 @@ enum OCRDMA_DCBX_PARAM_TYPE {
 	OCRDMA_PARAMETER_TYPE_PEER	= 0x02
 };
 
-enum OCRDMA_DCBX_APP_PROTO {
-	OCRDMA_APP_PROTO_ROCE	= 0x8915
-};
-
 enum OCRDMA_DCBX_PROTO {
 	OCRDMA_PROTO_SELECT_L2	= 0x00,
 	OCRDMA_PROTO_SELECT_L4	= 0x01

drivers/infiniband/hw/qedr/qedr_cm.c

@@ -293,7 +293,7 @@ static inline int qedr_gsi_build_header(struct qedr_dev *dev,
 	has_udp = (sgid_attr.gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP);
 	if (!has_udp) {
 		/* RoCE v1 */
-		ether_type = ETH_P_ROCE;
+		ether_type = ETH_P_IBOE;
 		*roce_mode = ROCE_V1;
 	} else if (ipv6_addr_v4mapped((struct in6_addr *)&sgid)) {
 		/* RoCE v2 IPv4 */

drivers/infiniband/hw/qedr/qedr_cm.h

@@ -37,7 +37,6 @@
 
 #define QEDR_GSI_MAX_RECV_SGE	(1)	/* LL2 FW limitation */
 
-#define ETH_P_ROCE		(0x8915)
 #define QEDR_ROCE_V2_UDP_SPORT	(0000)
 
 static inline u32 qedr_get_ipv4_from_gid(u8 *gid)

drivers/infiniband/hw/usnic/usnic_common_pkt_hdr.h

@@ -34,7 +34,6 @@
 #ifndef USNIC_CMN_PKT_HDR_H
 #define USNIC_CMN_PKT_HDR_H
 
-#define USNIC_ROCE_ETHERTYPE		(0x8915)
 #define USNIC_ROCE_GRH_VER              (8)
 #define USNIC_PROTO_VER                 (1)
 #define USNIC_ROCE_GRH_VER_SHIFT        (4)

drivers/infiniband/hw/usnic/usnic_fwd.h

@@ -36,6 +36,7 @@
 
 #include <linux/if.h>
 #include <linux/netdevice.h>
+#include <linux/if_ether.h>
 #include <linux/pci.h>
 #include <linux/in.h>
 
@@ -97,7 +98,7 @@ static inline void usnic_fwd_init_usnic_filter(struct filter *filter,
 						uint32_t usnic_id)
 {
 	filter->type = FILTER_USNIC_ID;
-	filter->u.usnic.ethtype = USNIC_ROCE_ETHERTYPE;
+	filter->u.usnic.ethtype = ETH_P_IBOE;
 	filter->u.usnic.flags = FILTER_FIELD_USNIC_ETHTYPE |
 				FILTER_FIELD_USNIC_ID |
 				FILTER_FIELD_USNIC_PROTO;

include/uapi/linux/if_ether.h

@@ -93,6 +93,7 @@
 #define ETH_P_NCSI	0x88F8		/* NCSI protocol		*/
 #define ETH_P_PRP	0x88FB		/* IEC 62439-3 PRP/HSRv0	*/
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_IBOE	0x8915		/* Infiniband over Ethernet	*/
 #define ETH_P_TDLS	0x890D          /* TDLS */
 #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_80221	0x8917		/* IEEE 802.21 Media Independent Handover Protocol */