V4L/DVB (4766): Add working dib7000m-module

First working version of the dib7000m-driver. 
This commit also makes the Hauppauge NOVA-T Stick working.
Signed-off-by: Francois Kanounnikoff <fkanounnikoff@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -96,29 +96,97 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
 }
 
 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
-/*
-static struct mt2060_config stk7000p_mt2060_config = {
-	0x60
+static struct dibx000_agc_config stk7700p_dib7000m_agc_config = {
+	BAND_UHF | BAND_VHF,       // band_caps
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+	712,  // inv_gain
+	41,  // time_stabiliz
+
+	0,  // alpha_level
+	118,  // thlock
+
+	0,     // wbd_inv
+	4095,  // wbd_ref
+	0,     // wbd_sel
+	0,     // wbd_alpha
+
+	42598,  // agc1_max
+	17694,  // agc1_min
+	45875,  // agc2_max
+	2621,  // agc2_min
+	0,  // agc1_pt1
+	76,  // agc1_pt2
+	139,  // agc1_pt3
+	52,  // agc1_slope1
+	59,  // agc1_slope2
+	107,  // agc2_pt1
+	172,  // agc2_pt2
+	57,  // agc2_slope1
+	70,  // agc2_slope2
+
+	21,  // alpha_mant
+	25,  // alpha_exp
+	28,  // beta_mant
+	48,  // beta_exp
+
+	1,  // perform_agc_softsplit
+	{  0,     // split_min
+	   107,   // split_max
+	   51800, // global_split_min
+	   24700  // global_split_max
+	},
+};
+
+static struct dibx000_bandwidth_config stk7700p_dib7000m_mt2060_config = {
+	60000, 30000, // internal, sampling
+	1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+	0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+	(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+	60258167, // ifreq
+	20452225, // timf
+};
+
+static struct dib7000m_config stk7700p_dib7000m_config = {
+	.dvbt_mode = 1,
+	.output_mpeg2_in_188_bytes = 1,
+	.quartz_direct = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_dib7000m_agc_config,
+	.bw  = &stk7700p_dib7000m_mt2060_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
 };
-*/
 
 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
 {
+	struct dib0700_state *st = adap->dev->priv;
 	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
 	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(10);
 	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
 	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
 
-//	adap->fe = dib7000m_attach(&adap->dev->i2c_adap, &stk7700p_dib7000m_config, 18);
-	return 0;
+	st->mt2060_if1[0] = 1220;
+	return (adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config)) == NULL ? -ENODEV : 0;
 }
 
+static struct mt2060_config stk7700p_mt2060_config = {
+	0x60
+};
+
 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
 {
-//	tun_i2c = dib7000m_get_tuner_i2c_master(adap->fe, 1);
-//	return mt2060_attach(adap->fe, tun_i2c, &stk3000p_mt2060_config, if1);
-	return 0;
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_adapter *tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &stk7700p_mt2060_config,
+		st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
 }
 
 struct usb_device_id dib0700_usb_id_table[] = {
@@ -127,6 +195,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 		{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
 		{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
 		{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
+		{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P_PC) },
 		{ }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -171,7 +240,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 		.num_device_descs = 3,
 		.devices = {
 			{   "DiBcom STK7700P reference design",
-				{ &dib0700_usb_id_table[0], NULL },
+				{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[5] },
 				{ NULL },
 			},
 			{   "Hauppauge Nova-T Stick",

drivers/media/dvb/dvb-usb/dvb-usb-ids.h

@@ -53,6 +53,7 @@
 #define USB_PID_DIBCOM_MOD3001_COLD			0x0bc6
 #define USB_PID_DIBCOM_MOD3001_WARM			0x0bc7
 #define USB_PID_DIBCOM_STK7700P				0x1e14
+#define USB_PID_DIBCOM_STK7700P_PC			0x1e78
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
 #define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1

drivers/media/dvb/frontends/Kconfig

@@ -172,6 +172,14 @@ config DVB_DIB3000MC
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
 
+config DVB_DIB7000M
+	tristate "DiBcom 7000MA/MB/PA/PB/MC"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 

drivers/media/dvb/frontends/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
 obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
 obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o

drivers/media/dvb/frontends/dib7000m.c

@@ -19,7 +19,7 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); } } while (0)
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M:"); printk(args); } } while (0)
 
 struct dib7000m_state {
 	struct dvb_frontend demod;
@@ -38,11 +38,21 @@ struct dib7000m_state {
 	u8 current_band;
 	fe_bandwidth_t current_bandwidth;
 	struct dibx000_agc_config *current_agc;
-	u32 timf[9];
+	u32 timf;
 
 	u16 revision;
 };
 
+enum dib7000m_power_mode {
+	DIB7000M_POWER_ALL = 0,
+
+	DIB7000M_POWER_NO,
+	DIB7000M_POWER_INTERF_ANALOG_AGC,
+	DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
+	DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD,
+	DIB7000M_POWER_INTERFACE_ONLY,
+};
+
 static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
 {
 	u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
@@ -58,7 +68,6 @@ static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
 	return (rb[0] << 8) | rb[1];
 }
 
-/*
 static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
 {
 	u8 b[4] = {
@@ -70,7 +79,835 @@ static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
 	};
 	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
 }
-*/
+static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
+{
+	int    ret = 0;
+	u16 outreg, fifo_threshold, smo_mode,
+		sram = 0x0005; /* by default SRAM output is disabled */
+
+	outreg = 0;
+	fifo_threshold = 1792;
+	smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
+
+	dprintk("-I-  Setting output mode for demod %p to %d\n",
+			&state->demod, mode);
+
+	switch (mode) {
+		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
+			outreg = (1 << 10);  /* 0x0400 */
+			break;
+		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
+			outreg = (1 << 10) | (1 << 6); /* 0x0440 */
+			break;
+		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
+			outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
+			break;
+		case OUTMODE_DIVERSITY:
+			if (state->cfg.hostbus_diversity)
+				outreg = (1 << 10) | (4 << 6); /* 0x0500 */
+			else
+				sram   |= 0x0c00;
+			break;
+		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
+			smo_mode |= (3 << 1);
+			fifo_threshold = 512;
+			outreg = (1 << 10) | (5 << 6);
+			break;
+		case OUTMODE_HIGH_Z:  // disable
+			outreg = 0;
+			break;
+		default:
+			dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+			break;
+	}
+
+	if (state->cfg.output_mpeg2_in_188_bytes)
+		smo_mode |= (1 << 5) ;
+
+	ret |= dib7000m_write_word(state,  294 + state->reg_offs, smo_mode);
+	ret |= dib7000m_write_word(state,  295 + state->reg_offs, fifo_threshold); /* synchronous fread */
+	ret |= dib7000m_write_word(state, 1795, outreg);
+	ret |= dib7000m_write_word(state, 1805, sram);
+
+	return ret;
+}
+
+static int dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
+{
+	/* by default everything is going to be powered off */
+	u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906  = 0x3fff;
+
+	/* now, depending on the requested mode, we power on */
+	switch (mode) {
+		/* power up everything in the demod */
+		case DIB7000M_POWER_ALL:
+			reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000;
+			break;
+
+		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
+		case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */
+			reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
+			break;
+
+		case DIB7000M_POWER_INTERF_ANALOG_AGC:
+			reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
+			reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
+			reg_906 &= ~((1 << 0));
+			break;
+
+		case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
+			reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000;
+			break;
+
+		case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD:
+			reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000;
+			break;
+		case DIB7000M_POWER_NO:
+			break;
+	}
+
+	/* always power down unused parts */
+	if (!state->cfg.mobile_mode)
+		reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
+
+	/* P_sdio_select_clk = 0 on MC */
+	if (state->revision != 0x4000)
+		reg_906 <<= 1;
+
+	dib7000m_write_word(state,  903,  reg_903);
+	dib7000m_write_word(state,  904,  reg_904);
+	dib7000m_write_word(state,  905,  reg_905);
+	dib7000m_write_word(state,  906,  reg_906);
+
+	return 0;
+}
+
+static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
+{
+	int ret = 0;
+	u16 reg_913 = dib7000m_read_word(state, 913),
+	       reg_914 = dib7000m_read_word(state, 914);
+
+	switch (no) {
+		case DIBX000_SLOW_ADC_ON:
+			reg_914 |= (1 << 1) | (1 << 0);
+			ret |= dib7000m_write_word(state, 914, reg_914);
+			reg_914 &= ~(1 << 1);
+			break;
+
+		case DIBX000_SLOW_ADC_OFF:
+			reg_914 |=  (1 << 1) | (1 << 0);
+			break;
+
+		case DIBX000_ADC_ON:
+			if (state->revision == 0x4000) { // workaround for PA/MA
+				// power-up ADC
+				dib7000m_write_word(state, 913, 0);
+				dib7000m_write_word(state, 914, reg_914 & 0x3);
+				// power-down bandgag
+				dib7000m_write_word(state, 913, (1 << 15));
+				dib7000m_write_word(state, 914, reg_914 & 0x3);
+			}
+
+			reg_913 &= 0x0fff;
+			reg_914 &= 0x0003;
+			break;
+
+		case DIBX000_ADC_OFF: // leave the VBG voltage on
+			reg_913 |= (1 << 14) | (1 << 13) | (1 << 12);
+			reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+			break;
+
+		case DIBX000_VBG_ENABLE:
+			reg_913 &= ~(1 << 15);
+			break;
+
+		case DIBX000_VBG_DISABLE:
+			reg_913 |= (1 << 15);
+			break;
+
+		default:
+			break;
+	}
+
+//	dprintk("-D-  913: %x, 914: %x\n", reg_913, reg_914);
+
+	ret |= dib7000m_write_word(state, 913, reg_913);
+	ret |= dib7000m_write_word(state, 914, reg_914);
+
+	return ret;
+}
+
+static int dib7000m_set_bandwidth(struct dvb_frontend *demod, u8 bw_idx)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	u32 timf;
+
+	// store the current bandwidth for later use
+	state->current_bandwidth = bw_idx;
+
+	if (state->timf == 0) {
+		dprintk("-D-  Using default timf\n");
+		timf = state->cfg.bw->timf;
+	} else {
+		dprintk("-D-  Using updated timf\n");
+		timf = state->timf;
+	}
+
+	timf = timf * (BW_INDEX_TO_KHZ(bw_idx) / 100) / 80;
+
+	dib7000m_write_word(state, 23, (timf >> 16) & 0xffff);
+	dib7000m_write_word(state, 24, (timf      ) & 0xffff);
+
+	return 0;
+}
+
+static int dib7000m_sad_calib(struct dib7000m_state *state)
+{
+
+/* internal */
+//	dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+	dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
+	dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
+
+	/* do the calibration */
+	dib7000m_write_word(state, 929, (1 << 0));
+	dib7000m_write_word(state, 929, (0 << 0));
+
+	msleep(1);
+
+	return 0;
+}
+
+static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
+{
+	dib7000m_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
+	dib7000m_write_word(state, 19,  (bw->internal*1000)        & 0xffff);
+	dib7000m_write_word(state, 21,  (bw->ifreq          >> 16) & 0xffff);
+	dib7000m_write_word(state, 22,   bw->ifreq                 & 0xffff);
+
+	dib7000m_write_word(state, 928, bw->sad_cfg);
+}
+
+static void dib7000m_reset_pll(struct dib7000m_state *state)
+{
+	const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+	u16 reg_907,reg_910;
+
+	/* default */
+	reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) |
+		(bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) |
+		(bw->enable_refdiv << 1) | (0 << 0);
+	reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset;
+
+	// for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value)
+	// this is only working only for 30 MHz crystals
+	if (!state->cfg.quartz_direct) {
+		reg_910 |= (1 << 5);  // forcing the predivider to 1
+
+		// if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2)
+		if(state->cfg.input_clk_is_div_2)
+			reg_907 |= (16 << 9);
+		else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary
+			reg_907 |= (8 << 9);
+	} else {
+		reg_907 |= (bw->pll_ratio & 0x3f) << 9;
+		reg_910 |= (bw->pll_prediv << 5);
+	}
+
+	dib7000m_write_word(state, 910, reg_910); // pll cfg
+	dib7000m_write_word(state, 907, reg_907); // clk cfg0
+	dib7000m_write_word(state, 908, 0x0006);  // clk_cfg1
+
+	dib7000m_reset_pll_common(state, bw);
+}
+
+static void dib7000mc_reset_pll(struct dib7000m_state *state)
+{
+	const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+
+	// clk_cfg0
+	dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
+
+	// clk_cfg1
+	//dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
+	dib7000m_write_word(state, 908, (0 << 14) | (3 << 12) |(0 << 11) |
+			(bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
+			(bw->pll_bypass << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0));
+
+	// smpl_cfg
+	dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
+
+	dib7000m_reset_pll_common(state, bw);
+}
+
+static int dib7000m_reset_gpio(struct dib7000m_state *st)
+{
+	/* reset the GPIOs */
+	dprintk("-D-  gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",
+		st->cfg.gpio_dir, st->cfg.gpio_val,st->cfg.gpio_pwm_pos);
+
+	dib7000m_write_word(st, 773, st->cfg.gpio_dir);
+	dib7000m_write_word(st, 774, st->cfg.gpio_val);
+
+	/* TODO 782 is P_gpio_od */
+
+	dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos);
+
+	dib7000m_write_word(st, 780, st->cfg.pwm_freq_div);
+	return 0;
+}
+
+static int dib7000m_demod_reset(struct dib7000m_state *state)
+{
+	dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
+
+	/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
+	dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+	/* restart all parts */
+	dib7000m_write_word(state,  898, 0xffff);
+	dib7000m_write_word(state,  899, 0xffff);
+	dib7000m_write_word(state,  900, 0xff0f);
+	dib7000m_write_word(state,  901, 0xfffc);
+
+	dib7000m_write_word(state,  898, 0);
+	dib7000m_write_word(state,  899, 0);
+	dib7000m_write_word(state,  900, 0);
+	dib7000m_write_word(state,  901, 0);
+
+	if (state->revision == 0x4000)
+		dib7000m_reset_pll(state);
+	else
+		dib7000mc_reset_pll(state);
+
+	if (dib7000m_reset_gpio(state) != 0)
+		dprintk("-E-  GPIO reset was not successful.\n");
+
+	if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+		dprintk("-E-  OUTPUT_MODE could not be resetted.\n");
+
+	/* unforce divstr regardless whether i2c enumeration was done or not */
+	dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
+
+	dib7000m_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+
+	dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+	dib7000m_sad_calib(state);
+	dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+
+	dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
+
+	return 0;
+}
+
+static void dib7000m_restart_agc(struct dib7000m_state *state)
+{
+	// P_restart_iqc & P_restart_agc
+	dib7000m_write_word(state, 898, 0x0c00);
+	dib7000m_write_word(state, 898, 0x0000);
+}
+
+static int dib7000m_agc_soft_split(struct dib7000m_state *state)
+{
+	u16 agc,split_offset;
+
+	if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
+		return 0;
+
+	// n_agc_global
+	agc = dib7000m_read_word(state, 390);
+
+	if (agc > state->current_agc->split.min_thres)
+		split_offset = state->current_agc->split.min;
+	else if (agc < state->current_agc->split.max_thres)
+		split_offset = state->current_agc->split.max;
+	else
+		split_offset = state->current_agc->split.max *
+			(agc - state->current_agc->split.min_thres) /
+			(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
+
+	dprintk("AGC split_offset: %d\n",split_offset);
+
+	// P_agc_force_split and P_agc_split_offset
+	return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
+}
+
+static int dib7000m_update_lna(struct dib7000m_state *state)
+{
+	int i;
+	u16 dyn_gain;
+
+	// when there is no LNA to program return immediatly
+	if (state->cfg.update_lna == NULL)
+		return 0;
+
+	msleep(60);
+	for (i = 0; i < 20; i++) {
+		// read dyn_gain here (because it is demod-dependent and not tuner)
+		dyn_gain = dib7000m_read_word(state, 390);
+
+		dprintk("agc global: %d\n", dyn_gain);
+
+		if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
+			dib7000m_restart_agc(state);
+			msleep(60);
+		} else
+			break;
+	}
+	return 0;
+}
+
+static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
+{
+	struct dibx000_agc_config *agc = NULL;
+	int i;
+	if (state->current_band == band)
+		return;
+	state->current_band = band;
+
+	for (i = 0; i < state->cfg.agc_config_count; i++)
+		if (state->cfg.agc[i].band_caps & band) {
+			agc = &state->cfg.agc[i];
+			break;
+		}
+
+	if (agc == NULL) {
+		dprintk("-E-  No valid AGC configuration found for band 0x%02x\n",band);
+		return;
+	}
+
+	state->current_agc = agc;
+
+	/* AGC */
+	dib7000m_write_word(state, 72 ,  agc->setup);
+	dib7000m_write_word(state, 73 ,  agc->inv_gain);
+	dib7000m_write_word(state, 74 ,  agc->time_stabiliz);
+	dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock);
+
+	// Demod AGC loop configuration
+	dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
+	dib7000m_write_word(state, 99, (agc->beta_mant  << 6) | agc->beta_exp);
+
+	dprintk("-D-  WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+	/* AGC continued */
+	if (state->wbd_ref != 0)
+		dib7000m_write_word(state, 102, state->wbd_ref);
+	else // use default
+		dib7000m_write_word(state, 102, agc->wbd_ref);
+
+	dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
+	dib7000m_write_word(state, 104,  agc->agc1_max);
+	dib7000m_write_word(state, 105,  agc->agc1_min);
+	dib7000m_write_word(state, 106,  agc->agc2_max);
+	dib7000m_write_word(state, 107,  agc->agc2_min);
+	dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
+	dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+	if (state->revision > 0x4000) { // settings for the MC
+		dib7000m_write_word(state, 71,   agc->agc1_pt3);
+//		dprintk("-D-  929: %x %d %d\n",
+//			(dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
+		dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
+	} else {
+		// wrong default values
+		u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 };
+		for (i = 0; i < 9; i++)
+			dib7000m_write_word(state, 88 + i, b[i]);
+	}
+}
+
+static void dib7000m_update_timf_freq(struct dib7000m_state *state)
+{
+	u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
+	state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+	dib7000m_write_word(state, 23, (u16) (timf >> 16));
+	dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
+	dprintk("-D-  Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+}
+
+static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+{
+	u16 value, est[4];
+
+	dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->RF_kHz));
+
+	/* nfft, guard, qam, alpha */
+	dib7000m_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+	dib7000m_write_word(state, 5, (seq << 4));
+
+	/* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
+	value = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
+	if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
+		value |= (ch->vit_code_rate_hp << 1);
+	else
+		value |= (ch->vit_code_rate_lp << 1);
+	dib7000m_write_word(state, 267 + state->reg_offs, value);
+
+	/* offset loop parameters */
+
+	/* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */
+	dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80);
+
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+	dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */
+	dib7000m_write_word(state, 32, (0 << 4) | 0x3);
+
+	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */
+	dib7000m_write_word(state, 33, (0 << 4) | 0x5);
+
+	/* P_dvsy_sync_wait */
+	switch (ch->nfft) {
+		case 1: value = 256; break;
+		case 2: value = 128; break;
+		case 0:
+		default: value = 64; break;
+	}
+	value *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
+	value <<= 4;
+
+	/* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
+	/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+	if (ch->intlv_native || state->revision > 0x4000)
+		value |= (1 << 2) | (2 << 0);
+	else
+		value |= 0;
+	dib7000m_write_word(state, 266 + state->reg_offs, value);
+
+	/* channel estimation fine configuration */
+	switch (ch->nqam) {
+		case 2:
+			est[0] = 0x0148;       /* P_adp_regul_cnt 0.04 */
+			est[1] = 0xfff0;       /* P_adp_noise_cnt -0.002 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.001 */
+			break;
+		case 1:
+			est[0] = 0x023d;       /* P_adp_regul_cnt 0.07 */
+			est[1] = 0xffdf;       /* P_adp_noise_cnt -0.004 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff0;       /* P_adp_noise_ext -0.002 */
+			break;
+		default:
+			est[0] = 0x099a;       /* P_adp_regul_cnt 0.3 */
+			est[1] = 0xffae;       /* P_adp_noise_cnt -0.01 */
+			est[2] = 0x0333;       /* P_adp_regul_ext 0.1 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.002 */
+			break;
+	}
+	for (value = 0; value < 4; value++)
+		dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
+
+	// set power-up level: interf+analog+AGC
+	dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
+	dib7000m_set_adc_state(state, DIBX000_ADC_ON);
+
+	msleep(7);
+
+	//AGC initialization
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 1);
+
+	dib7000m_restart_agc(state);
+
+	// wait AGC rough lock time
+	msleep(5);
+
+	dib7000m_update_lna(state);
+	dib7000m_agc_soft_split(state);
+
+	// wait AGC accurate lock time
+	msleep(7);
+
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 0);
+
+	// set power-up level: autosearch
+	dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
+}
+
+static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	struct dibx000_ofdm_channel auto_ch;
+	int ret = 0;
+	u8 seq;
+	u32 value;
+
+	INIT_OFDM_CHANNEL(&auto_ch);
+	auto_ch.RF_kHz           = ch->RF_kHz;
+	auto_ch.Bw               = ch->Bw;
+	auto_ch.nqam             = 2;
+	auto_ch.guard            = ch->guard == GUARD_INTERVAL_AUTO ? 0 : ch->guard;
+	auto_ch.nfft             = ch->nfft  == -1            ? 1 : ch->nfft;
+	auto_ch.vit_alpha        = 1;
+	auto_ch.vit_select_hp    = 1;
+	auto_ch.vit_code_rate_hp = 2;
+	auto_ch.vit_code_rate_lp = 3;
+	auto_ch.vit_hrch         = 0;
+	auto_ch.intlv_native     = 1;
+
+	seq = 0;
+	if (ch->nfft == -1 && ch->guard == GUARD_INTERVAL_AUTO) seq = 7;
+	if (ch->nfft == -1 && ch->guard != GUARD_INTERVAL_AUTO) seq = 2;
+	if (ch->nfft != -1 && ch->guard == GUARD_INTERVAL_AUTO) seq = 3;
+	dib7000m_set_channel(state, &auto_ch, seq);
+
+	// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
+	value = 30 * state->cfg.bw[BANDWIDTH_8_MHZ].internal;
+	ret |= dib7000m_write_word(state, 6,  (u16) ((value >> 16) & 0xffff)); // lock0 wait time
+	ret |= dib7000m_write_word(state, 7,  (u16)  (value        & 0xffff)); // lock0 wait time
+	value = 100 * state->cfg.bw[BANDWIDTH_8_MHZ].internal;
+	ret |= dib7000m_write_word(state, 8,  (u16) ((value >> 16) & 0xffff)); // lock1 wait time
+	ret |= dib7000m_write_word(state, 9,  (u16)  (value        & 0xffff)); // lock1 wait time
+	value = 500 * state->cfg.bw[BANDWIDTH_8_MHZ].internal;
+	ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
+	ret |= dib7000m_write_word(state, 11, (u16)  (value        & 0xffff)); // lock2 wait time
+
+	// start search
+	value = dib7000m_read_word(state, 0);
+	ret |= dib7000m_write_word(state, 0, value | (1 << 9));
+
+	/* clear n_irq_pending */
+	if (state->revision == 0x4000)
+		dib7000m_write_word(state, 1793, 0);
+	else
+		dib7000m_read_word(state, 537);
+
+	ret |= dib7000m_write_word(state, 0, (u16) value);
+
+	return ret;
+}
+
+static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
+{
+	u16 irq_pending = dib7000m_read_word(state, reg);
+
+	if (irq_pending & 0x1) { // failed
+		dprintk("#\n");
+		return 1;
+	}
+
+	if (irq_pending & 0x2) { // succeeded
+		dprintk("!\n");
+		return 2;
+	}
+	return 0; // still pending
+}
+
+static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	if (state->revision == 0x4000)
+		return dib7000m_autosearch_irq(state, 1793);
+	else
+		return dib7000m_autosearch_irq(state, 537);
+}
+
+static int dib7000m_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	int ret = 0;
+	u16 value;
+
+	// we are already tuned - just resuming from suspend
+	if (ch != NULL)
+		dib7000m_set_channel(state, ch, 0);
+	else
+		return -EINVAL;
+
+	// restart demod
+	ret |= dib7000m_write_word(state, 898, 0x4000);
+	ret |= dib7000m_write_word(state, 898, 0x0000);
+	msleep(45);
+
+	ret |= dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+	ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+	// never achieved a lock with that bandwidth so far - wait for timfreq to update
+	if (state->timf == 0)
+		msleep(200);
+
+	//dump_reg(state);
+	/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
+	value = (6 << 8) | 0x80;
+	switch (ch->nfft) {
+		case 0: value |= (7 << 12); break;
+		case 1: value |= (9 << 12); break;
+		case 2: value |= (8 << 12); break;
+	}
+	ret |= dib7000m_write_word(state, 26, value);
+
+	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
+	value = (0 << 4);
+	switch (ch->nfft) {
+		case 0: value |= 0x6; break;
+		case 1: value |= 0x8; break;
+		case 2: value |= 0x7; break;
+	}
+	ret |= dib7000m_write_word(state, 32, value);
+
+	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
+	value = (0 << 4);
+	switch (ch->nfft) {
+		case 0: value |= 0x6; break;
+		case 1: value |= 0x8; break;
+		case 2: value |= 0x7; break;
+	}
+	ret |= dib7000m_write_word(state, 33,  value);
+
+	// we achieved a lock - it's time to update the osc freq
+	if ((dib7000m_read_word(state, 535) >> 6)  & 0x1)
+		dib7000m_update_timf_freq(state);
+
+	return ret;
+}
+
+static int dib7000m_init(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	int ret = 0;
+	u8 o = state->reg_offs;
+
+	dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
+
+	if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
+		dprintk("-E-  could not start Slow ADC\n");
+
+	if (state->cfg.dvbt_mode)
+		dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
+
+	if (state->cfg.mobile_mode)
+		ret |= dib7000m_write_word(state, 261 + o, 2);
+	else
+		ret |= dib7000m_write_word(state, 224 + o, 1);
+
+	ret |= dib7000m_write_word(state, 173 + o, 0);
+	ret |= dib7000m_write_word(state, 174 + o, 0);
+	ret |= dib7000m_write_word(state, 175 + o, 0);
+	ret |= dib7000m_write_word(state, 176 + o, 0);
+	ret |= dib7000m_write_word(state, 177 + o, 0);
+	ret |= dib7000m_write_word(state, 178 + o, 0);
+	ret |= dib7000m_write_word(state, 179 + o, 0);
+	ret |= dib7000m_write_word(state, 180 + o, 0);
+
+	// P_corm_thres Lock algorithms configuration
+	ret |= dib7000m_write_word(state, 26, 0x6680);
+
+	// P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
+	ret |= dib7000m_write_word(state, 170 + o, 0x0410);
+	// P_fft_nb_to_cut
+	ret |= dib7000m_write_word(state, 182 + o, 8192);
+	// P_pha3_thres
+	ret |= dib7000m_write_word(state, 195 + o, 0x0ccd);
+	// P_cti_use_cpe, P_cti_use_prog
+	ret |= dib7000m_write_word(state, 196 + o,     0);
+	// P_cspu_regul, P_cspu_win_cut
+	ret |= dib7000m_write_word(state, 205 + o, 0x200f);
+	// P_adp_regul_cnt
+	ret |= dib7000m_write_word(state, 214 + o, 0x023d);
+	// P_adp_noise_cnt
+	ret |= dib7000m_write_word(state, 215 + o, 0x00a4);
+	// P_adp_regul_ext
+	ret |= dib7000m_write_word(state, 216 + o, 0x00a4);
+	// P_adp_noise_ext
+	ret |= dib7000m_write_word(state, 217 + o, 0x7ff0);
+	// P_adp_fil
+	ret |= dib7000m_write_word(state, 218 + o, 0x3ccc);
+
+	// P_2d_byp_ti_num
+	ret |= dib7000m_write_word(state, 226 + o, 0);
+
+	// P_fec_*
+	ret |= dib7000m_write_word(state, 281 + o, 0x0010);
+	// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+	ret |= dib7000m_write_word(state, 294 + o,0x0062);
+
+	// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
+	if(state->cfg.tuner_is_baseband)
+		ret |= dib7000m_write_word(state, 36, 0x0755);
+	else
+		ret |= dib7000m_write_word(state, 36, 0x1f55);
+
+	// auto search configuration
+	ret |= dib7000m_write_word(state, 2,  0x0004);
+	ret |= dib7000m_write_word(state, 3,  0x1000);
+	ret |= dib7000m_write_word(state, 4,  0x0814);
+	ret |= dib7000m_write_word(state, 6,  0x001b);
+	ret |= dib7000m_write_word(state, 7,  0x7740);
+	ret |= dib7000m_write_word(state, 8,  0x005b);
+	ret |= dib7000m_write_word(state, 9,  0x8d80);
+	ret |= dib7000m_write_word(state, 10, 0x01c9);
+	ret |= dib7000m_write_word(state, 11, 0xc380);
+	ret |= dib7000m_write_word(state, 12, 0x0000);
+	ret |= dib7000m_write_word(state, 13, 0x0080);
+	ret |= dib7000m_write_word(state, 14, 0x0000);
+	ret |= dib7000m_write_word(state, 15, 0x0090);
+	ret |= dib7000m_write_word(state, 16, 0x0001);
+	ret |= dib7000m_write_word(state, 17, 0xd4c0);
+	ret |= dib7000m_write_word(state, 263 + o,0x0001);
+
+	// P_divclksel=3 P_divbitsel=1
+	if (state->revision == 0x4000)
+		dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
+	else
+		dib7000m_write_word(state, 909, (3 << 4) | 1);
+
+	// Tuner IO bank: max drive (14mA)
+	ret |= dib7000m_write_word(state, 912 ,0x2c8a);
+
+	ret |= dib7000m_write_word(state, 1817, 1);
+
+	return ret;
+}
+
+static int dib7000m_sleep(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *st = demod->demodulator_priv;
+	dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
+	return dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY) |
+		dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
+		dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
+}
+
+static int dib7000m_identify(struct dib7000m_state *state)
+{
+	u16 value;
+	if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
+		dprintk("-E-  DiB7000M: wrong Vendor ID (read=0x%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	state->revision = dib7000m_read_word(state, 897);
+	if (state->revision != 0x4000 &&
+		state->revision != 0x4001 &&
+		state->revision != 0x4002) {
+		dprintk("-E-  DiB7000M: wrong Device ID (%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	/* protect this driver to be used with 7000PC */
+	if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
+		dprintk("-E-  DiB7000M: this driver does not work with DiB7000PC\n");
+		return -EREMOTEIO;
+	}
+
+	switch (state->revision) {
+		case 0x4000: dprintk("-I-  found DiB7000MA/PA/MB/PB\n"); break;
+		case 0x4001: state->reg_offs = 1; dprintk("-I-  found DiB7000HC\n"); break;
+		case 0x4002: state->reg_offs = 1; dprintk("-I-  found DiB7000MC\n"); break;
+	}
+
+	return 0;
+}
+
 
 static int dib7000m_get_frontend(struct dvb_frontend* fe,
 				struct dvb_frontend_parameters *fep)
@@ -133,13 +970,48 @@ static int dib7000m_get_frontend(struct dvb_frontend* fe,
 static int dib7000m_set_frontend(struct dvb_frontend* fe,
 				struct dvb_frontend_parameters *fep)
 {
-	return 0;
+	struct dib7000m_state *state = fe->demodulator_priv;
+	struct dibx000_ofdm_channel ch;
+
+	INIT_OFDM_CHANNEL(&ch);
+	FEP2DIB(fep,&ch);
+
+	state->current_bandwidth = fep->u.ofdm.bandwidth;
+	dib7000m_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, fep);
+
+	if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+		fep->u.ofdm.guard_interval    == GUARD_INTERVAL_AUTO ||
+		fep->u.ofdm.constellation     == QAM_AUTO ||
+		fep->u.ofdm.code_rate_HP      == FEC_AUTO) {
+		int i = 800, found;
+
+		dib7000m_autosearch_start(fe, &ch);
+		do {
+			msleep(1);
+			found = dib7000m_autosearch_is_irq(fe);
+		} while (found == 0 && i--);
+
+		dprintk("autosearch returns: %d\n",found);
+		if (found == 0 || found == 1)
+			return 0; // no channel found
+
+		dib7000m_get_frontend(fe, fep);
+		FEP2DIB(fep, &ch);
+	}
+
+	/* make this a config parameter */
+	dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
+
+	return dib7000m_tune(fe, &ch);
 }
 
 static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 {
 	struct dib7000m_state *state = fe->demodulator_priv;
-	u16 lock = dib7000m_read_word(state, 509);
+	u16 lock = dib7000m_read_word(state, 535);
 
 	*stat = 0;
 
@@ -191,18 +1063,100 @@ static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_fro
 	return 0;
 }
 
-static int dib7000m_init(struct dvb_frontend *fe)
+static void dib7000m_release(struct dvb_frontend *demod)
 {
-	return 0;
+	struct dib7000m_state *st = demod->demodulator_priv;
+	dibx000_exit_i2c_master(&st->i2c_master);
+	kfree(st);
 }
 
-static int dib7000m_sleep(struct dvb_frontend *fe)
+struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
 {
+	struct dib7000m_state *st = demod->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+EXPORT_SYMBOL(dib7000m_get_i2c_master);
+
+int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[])
+{
+	struct dib7000m_state st = { .i2c_adap = i2c };
+	int k = 0;
+	u8 new_addr = 0;
+
+	for (k = no_of_demods-1; k >= 0; k--) {
+		st.cfg = cfg[k];
+
+		/* designated i2c address */
+		new_addr          = (0x40 + k) << 1;
+		st.i2c_addr = new_addr;
+		if (dib7000m_identify(&st) != 0) {
+			st.i2c_addr = default_addr;
+			if (dib7000m_identify(&st) != 0) {
+				dprintk("DiB7000M #%d: not identified\n", k);
+				return -EIO;
+			}
+		}
+
+		/* start diversity to pull_down div_str - just for i2c-enumeration */
+		dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY);
+
+		dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output
+
+		/* set new i2c address and force divstart */
+		dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
+
+		dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+	}
+
+	for (k = 0; k < no_of_demods; k++) {
+		st.cfg = cfg[k];
+		st.i2c_addr = (0x40 + k) << 1;
+
+		// unforce divstr
+		dib7000m_write_word(&st,1794, st.i2c_addr << 2);
+
+		/* deactivate div - it was just for i2c-enumeration */
+		dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z);
+	}
+
 	return 0;
 }
+EXPORT_SYMBOL(dib7000m_i2c_enumeration);
 
-static void dib7000m_release(struct dvb_frontend *fe)
-{ }
+static struct dvb_frontend_ops dib7000m_ops;
+struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
+{
+	struct dvb_frontend *demod;
+	struct dib7000m_state *st;
+	st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
+	st->i2c_adap = i2c_adap;
+	st->i2c_addr = i2c_addr;
+
+	demod                   = &st->demod;
+	demod->demodulator_priv = st;
+	memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
+
+	if (dib7000m_identify(st) != 0)
+		goto error;
+
+	if (st->revision == 0x4000)
+		dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr);
+	else
+		dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr);
+
+	dib7000m_demod_reset(st);
+
+	return demod;
+
+error:
+	kfree(st);
+	return NULL;
+}
+EXPORT_SYMBOL(dib7000m_attach);
 
 static struct dvb_frontend_ops dib7000m_ops = {
 	.info = {

drivers/media/dvb/frontends/dib7000m.h

@@ -32,12 +32,13 @@ struct dib7000m_config {
 	u8 quartz_direct;
 
 	u8 input_clk_is_div_2;
+
+	int (*agc_control) (struct dvb_frontend *, u8 before);
 };
 
 #define DEFAULT_DIB7000M_I2C_ADDRESS 18
 
-extern int dib7000m_attach(struct i2c_adapter *i2c_adap, int no_of_demods, u8 default_addr , u8 do_i2c_enum, struct dib7000m_config[], struct dvb_frontend*[]);
-
+extern struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg);
 extern struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
 
 /* TODO

drivers/media/dvb/frontends/dibx000_common.c

@@ -63,7 +63,7 @@ static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c
 	struct i2c_msg m[2 + num];
 	u8 tx_open[4], tx_close[4];
 
-	memset(m,0, sizeof(struct i2c_msg) * (2 + num));
+	memset(m,0, sizeof(struct i2c_msg) * (2 + num)),
 
 	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
 

drivers/media/dvb/frontends/dibx000_common.h

@@ -32,6 +32,13 @@ extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
 #define BAND_LBAND 0x01
 #define BAND_UHF   0x02
 #define BAND_VHF   0x04
+#define BAND_SBAND 0x08
+#define BAND_FM	   0x10
+
+#define BAND_OF_FREQUENCY(freq_kHz) ( (freq_kHz) <= 115000 ? BAND_FM : \
+									(freq_kHz) <= 250000 ? BAND_VHF : \
+									(freq_kHz) <= 863000 ? BAND_UHF : \
+									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
 
 struct dibx000_agc_config {
 	/* defines the capabilities of this AGC-setting - using the BAND_-defines*/
@@ -129,6 +136,7 @@ enum dibx000_adc_states {
 
 /* I hope I can get rid of the following kludge in the near future */
 struct dibx000_ofdm_channel {
+	u32 RF_kHz;
 	u8  Bw;
 	s16 nfft;
 	s16 guard;
@@ -138,9 +146,11 @@ struct dibx000_ofdm_channel {
 	s16 vit_alpha;
 	s16 vit_code_rate_hp;
 	s16 vit_code_rate_lp;
+	u8  intlv_native;
 };
 
 #define FEP2DIB(fep,ch) \
+	(ch)->RF_kHz           = (fep)->frequency / 1000; \
 	(ch)->Bw               = (fep)->u.ofdm.bandwidth; \
 	(ch)->nfft             = (fep)->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ? -1 : (fep)->u.ofdm.transmission_mode; \
 	(ch)->guard            = (fep)->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ? -1 : (fep)->u.ofdm.guard_interval; \
@@ -149,7 +159,8 @@ struct dibx000_ofdm_channel {
 	(ch)->vit_select_hp    = 1; \
 	(ch)->vit_alpha        = 1; \
 	(ch)->vit_code_rate_hp = (fep)->u.ofdm.code_rate_HP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_HP; \
-	(ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP;
+	(ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP; \
+	(ch)->intlv_native     = 1;
 
 #define INIT_OFDM_CHANNEL(ch) do {\
 	(ch)->Bw               = 0;  \