Commit 6a21cc50 authored by Tycho Andersen's avatar Tycho Andersen Committed by Kees Cook

seccomp: add a return code to trap to userspace

This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.

The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.

As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).

This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.

The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.

Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: default avatarTycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: default avatarSerge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: default avatarKees Cook <keescook@chromium.org>
parent a5662e4d
......@@ -79,6 +79,7 @@ Code Seq#(hex) Include File Comments
0x1b all InfiniBand Subsystem <http://infiniband.sourceforge.net/>
0x20 all drivers/cdrom/cm206.h
0x22 all scsi/sg.h
'!' 00-1F uapi/linux/seccomp.h
'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem
'$' 00-0F linux/perf_counter.h, linux/perf_event.h
'%' 00-0F include/uapi/linux/stm.h
......
......@@ -122,6 +122,11 @@ In precedence order, they are:
Results in the lower 16-bits of the return value being passed
to userland as the errno without executing the system call.
``SECCOMP_RET_USER_NOTIF``:
Results in a ``struct seccomp_notif`` message sent on the userspace
notification fd, if it is attached, or ``-ENOSYS`` if it is not. See below
on discussion of how to handle user notifications.
``SECCOMP_RET_TRACE``:
When returned, this value will cause the kernel to attempt to
notify a ``ptrace()``-based tracer prior to executing the system
......@@ -183,6 +188,85 @@ The ``samples/seccomp/`` directory contains both an x86-specific example
and a more generic example of a higher level macro interface for BPF
program generation.
Userspace Notification
======================
The ``SECCOMP_RET_USER_NOTIF`` return code lets seccomp filters pass a
particular syscall to userspace to be handled. This may be useful for
applications like container managers, which wish to intercept particular
syscalls (``mount()``, ``finit_module()``, etc.) and change their behavior.
To acquire a notification FD, use the ``SECCOMP_FILTER_FLAG_NEW_LISTENER``
argument to the ``seccomp()`` syscall:
.. code-block:: c
fd = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_NEW_LISTENER, &prog);
which (on success) will return a listener fd for the filter, which can then be
passed around via ``SCM_RIGHTS`` or similar. Note that filter fds correspond to
a particular filter, and not a particular task. So if this task then forks,
notifications from both tasks will appear on the same filter fd. Reads and
writes to/from a filter fd are also synchronized, so a filter fd can safely
have many readers.
The interface for a seccomp notification fd consists of two structures:
.. code-block:: c
struct seccomp_notif_sizes {
__u16 seccomp_notif;
__u16 seccomp_notif_resp;
__u16 seccomp_data;
};
struct seccomp_notif {
__u64 id;
__u32 pid;
__u32 flags;
struct seccomp_data data;
};
struct seccomp_notif_resp {
__u64 id;
__s64 val;
__s32 error;
__u32 flags;
};
The ``struct seccomp_notif_sizes`` structure can be used to determine the size
of the various structures used in seccomp notifications. The size of ``struct
seccomp_data`` may change in the future, so code should use:
.. code-block:: c
struct seccomp_notif_sizes sizes;
seccomp(SECCOMP_GET_NOTIF_SIZES, 0, &sizes);
to determine the size of the various structures to allocate. See
samples/seccomp/user-trap.c for an example.
Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)`` (or ``poll()``) on a
seccomp notification fd to receive a ``struct seccomp_notif``, which contains
five members: the input length of the structure, a unique-per-filter ``id``,
the ``pid`` of the task which triggered this request (which may be 0 if the
task is in a pid ns not visible from the listener's pid namespace), a ``flags``
member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
whether or not the notification is a result of a non-fatal signal, and the
``data`` passed to seccomp. Userspace can then make a decision based on this
information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
response, indicating what should be returned to userspace. The ``id`` member of
``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
seccomp_notif``.
It is worth noting that ``struct seccomp_data`` contains the values of register
arguments to the syscall, but does not contain pointers to memory. The task's
memory is accessible to suitably privileged traces via ``ptrace()`` or
``/proc/pid/mem``. However, care should be taken to avoid the TOCTOU mentioned
above in this document: all arguments being read from the tracee's memory
should be read into the tracer's memory before any policy decisions are made.
This allows for an atomic decision on syscall arguments.
Sysctls
=======
......
......@@ -6,7 +6,8 @@
#define SECCOMP_FILTER_FLAG_MASK (SECCOMP_FILTER_FLAG_TSYNC | \
SECCOMP_FILTER_FLAG_LOG | \
SECCOMP_FILTER_FLAG_SPEC_ALLOW)
SECCOMP_FILTER_FLAG_SPEC_ALLOW | \
SECCOMP_FILTER_FLAG_NEW_LISTENER)
#ifdef CONFIG_SECCOMP
......
......@@ -15,11 +15,13 @@
#define SECCOMP_SET_MODE_STRICT 0
#define SECCOMP_SET_MODE_FILTER 1
#define SECCOMP_GET_ACTION_AVAIL 2
#define SECCOMP_GET_NOTIF_SIZES 3
/* Valid flags for SECCOMP_SET_MODE_FILTER */
#define SECCOMP_FILTER_FLAG_TSYNC (1UL << 0)
#define SECCOMP_FILTER_FLAG_LOG (1UL << 1)
#define SECCOMP_FILTER_FLAG_SPEC_ALLOW (1UL << 2)
#define SECCOMP_FILTER_FLAG_NEW_LISTENER (1UL << 3)
/*
* All BPF programs must return a 32-bit value.
......@@ -35,6 +37,7 @@
#define SECCOMP_RET_KILL SECCOMP_RET_KILL_THREAD
#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
#define SECCOMP_RET_USER_NOTIF 0x7fc00000U /* notifies userspace */
#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */
#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
......@@ -60,4 +63,35 @@ struct seccomp_data {
__u64 args[6];
};
struct seccomp_notif_sizes {
__u16 seccomp_notif;
__u16 seccomp_notif_resp;
__u16 seccomp_data;
};
struct seccomp_notif {
__u64 id;
__u32 pid;
__u32 flags;
struct seccomp_data data;
};
struct seccomp_notif_resp {
__u64 id;
__s64 val;
__s32 error;
__u32 flags;
};
#define SECCOMP_IOC_MAGIC '!'
#define SECCOMP_IO(nr) _IO(SECCOMP_IOC_MAGIC, nr)
#define SECCOMP_IOR(nr, type) _IOR(SECCOMP_IOC_MAGIC, nr, type)
#define SECCOMP_IOW(nr, type) _IOW(SECCOMP_IOC_MAGIC, nr, type)
#define SECCOMP_IOWR(nr, type) _IOWR(SECCOMP_IOC_MAGIC, nr, type)
/* Flags for seccomp notification fd ioctl. */
#define SECCOMP_IOCTL_NOTIF_RECV SECCOMP_IOWR(0, struct seccomp_notif)
#define SECCOMP_IOCTL_NOTIF_SEND SECCOMP_IOWR(1, \
struct seccomp_notif_resp)
#define SECCOMP_IOCTL_NOTIF_ID_VALID SECCOMP_IOR(2, __u64)
#endif /* _UAPI_LINUX_SECCOMP_H */
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment